hi! i am trying to upgrade to a cooked rom version, i already got the rom, but when i try to upgrade i get this error:
ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host.
error getting devicedata
I can use activesync perfectly, but i cant updgrade, any ideas? [/code][/b]
you have to use the SD method
btw, this forum is featuring a SEARCH option!
Related
hi
I have downloaded the wm2003se from lumpinstefan and i could change the rom of my pocket pc to that version by using ActiveSync.
Now i downloaded another version of the rom and i tried to install it on my Qtek 1010 (Wallaby) and it in the black window on my computer appears:
"ERROR: GetConnectionType - An existing connection was forcibly closed by the rem
ote host.
error getting connectiontype"
When i press the next button in the setup it says " cannot execute the remote communication prgram. please make sure that USB/Serial is properly connected". and the setup shuts down.
i Need You to know that before the new rom i downloaded from lumpistefan i was using pocket pc 2002 on my pocket pc.
Now it's clear that there is some problems in the connection. i tried it on several computers but i faced the same problem. is there any setting on my pocket pc to change??
Please somebody helps me i really need to know how to solve the problem.
Regards, and thank you.
Try searching the forum.
It´s an old problem copncerning to some T-Mobile ROMs
You have to flash your device via SD-Card....
Try also some looking in the wiki. The process how to flash vi SD-Card is there described...
And please do not post multiple threads with the same topic....
http://forum.xda-developers.com/viewtopic.php?t=20733
Stefan
ROM Upgrade communication error
Yeah I am having the same problem after installing the T-Mobile ROM, the same communication error when I try and change the installed ROM Image.
I did think it was something wrong with ActiveSync or my laptop :twisted:
Has anyone got any hints on how to do this on a Wannaby? (Saves me getting the wrong idea whilst reading through reams of text).
Many Thanks
Yes i have upgradet my rom via sd card and it worked. it is easy....
Any way thanks so much buddies... tell me something, is there a place in this forum where i can download the windows mobile 2005 version?
2005
I am abit of a newby to this site. I havent seen 2005 yet. Can I ask where I can find instructions for writing an SD card and how to apply to my PDA?
Andy - Whos scratching round for an SD card
ROM Version
Ahh, I see from other threads, ROM Version 4.01.16 prohibits upgrade via EXE! Damn! Ive just checked and thats what I have installed!
The T-Mobile image I'm using at the moment is very slow and comes up with application errors occasionally :x
Re: 2005
amtrakuk said:
I am abit of a newby to this site. I havent seen 2005 yet. Can I ask where I can find instructions for writing an SD card and how to apply to my PDA?
Andy - Whos scratching round for an SD card
Click to expand...
Click to collapse
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
HTH
Stefan
Hmm doesnt work for me. I am selecting the browse button to select the nbf file from the image and in the second drop down box selecting the sd card. When I press copy it comes up with the error ITWriteSDCard: The media is write protected, error opening target device. The card isnt locked as I can read and write files to it using explorer. Whats going on?!?!
Growing frustration!!!
A
Some internal SD-Card Writer make problems. i Think you can use also the SD-Card-Slot in your devuce, or you have to get an external Writer...
Stefan
Hi guys,
I have to compliment Stefan for personally e-mailing me back about a problem I was having and pointing me here. Hopefully I can become a little less clueless through the forums.
When using kitchen, I get the ROM.EXE update. I understand I run this on my PC. My phone is a Wallaby, with WM2003 first edition. I've written down my t-mobile settings and I'm ready to flash it. However, when attempting to run the ROM.EXE program, I getting the following error:
Code:
ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR
Cannot execute the remote communication progra,
Please make sure that the USB/Serial cable is properly connected.
The phone is connected to the PC directly over USB through it's cradle and I have ActivSync 3.7.1 running. Any ideas what my problem could be?[/code]
http://forum.xda-developers.com/vie...+remote+communication+program+programme+error
http://forum.xda-developers.com/vie...+remote+communication+program+programme+error
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Alrighty, after reading those, I figured I had to write the WM2k3SE ROM to a SD card. After extracing the NK.NBF from the ROM.EXE I have to a directory, I fire up the XDA OS IMAGE TOOL and select it in the SOURCE. I choose "SD CARD" for my destination and produce the following error:
Code:
NK.NBF: Incorrect Filesize(33554464), file size should be exactally 32505888 bytes. Error opening input file.
A quick search of the forums didn't show anything that might apply. According to these wiki instructions this looks like the correct thing to do. Is it possible that I have a bad kitchen rom?
Because of an different Memory Usage of the WM2003SE ROM, thes ROMs could only be flashed via EXE. OSImagetool used for writing this file to SD-Card reports an incorrect Filesize. If you have installed a T-Mobile ROM that prohibits upgrading via EXE-File (you get an error in the DOS-Box) you have to downgrade your phone to 3.17.03 via SD-Card and then use the WM2003SE ROM....
OK, but is the procedure I'm following correct? Download a WM2003FE ROM.EXE at version 3.17.03 and then extract the NK.NKF from the executable and flash with that? This will allow me to use the ROM.EXE of my WM2003SE kitchen image instead of using the OSI tool? (If this works, I'm going to go add to the wiki).
Hi All,
I am a newbie when it comes to flash my XDA II. With respect to my question, I searched all over this forum, but could not get the solution that is working for me. May be I got confused between different procedures for different ROMs.
Earlier, I tried upgrading my XDA II from PPC 2003 to WM5. While doing that all I did was took a backup of my origional PPC 2003 ROM using XDA OS Image Tool from XDA Toolkit. That is the only thing I have - ROM.nb1.
I successfully upgraded to WM5, but now started getting too meny warnings about Low Storage Memory. Frustrated with that, I decided to go back to where I was - with PPC 2003.
While doing so (downgrading from WM5 to PPC 2003), I used XDA OS Image Tool to write earlier created ROM.nb1 to my XDA II (with ActiveSynch 4.2 connected). OS Image tools shows copying the file and the first error comes up -
ERROR: GetDeviceData - An existing connection was forcibly closed by the remote host. error getting devicedata
After that prgramme a v1.09 comes up say to hit next. Once I go through the couple if next buttons I get a second error -
ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR
Cannot execute the remote communication program. Please make sure that the USB/Serial Cable is properly connected.
The cable is connected and activesync works normally.
I would like to mention here that while flashing my XDA II, all I have is earlier saved .nb1 file.
Am I missing something here ?
Please guide me.
Thanks in advance,
Bhushan.
I'm trying to cook a custom rom using DogGuy's kitchen, and am adding a few nueTools, including nuePackageInstaller. Everything cooks fine, and the program starts up fine -- I'm using the windows installer version of .net CF 3.5. When I click "select package", I get the following error:
An unexpected error has occurred in nuePackageInstaller.exe.
Select Quit and then restart this program, or select Details for more information.
File or assembly name 'ICSharpCode.SharpZipLib, Version=0.85.4.369, Culture=neutral, PublicKeyToken=null', or one of its dependancies was not found.
So, do I need to cook another program in for this to work? Any ideas where to find it? Am I missing something here? The other nueTools work.
EDIT: I found my answer:
Originally Posted by no2chem View Post
yes, you need the ICSharpZipLib.. please search for the dll somewhere in my rom image
Hi All,
Thank you for such a great forum. I tried to read as much as I can but still unable to solve the problem which I am facing currently.
I had a T Mobile MDA (HTC Wallaby) with the German Language. I tried to install a new ROM but after few seconds of connecting with the PC, the connection was broken and the computer doesnt
recognize the PDA. The only message i see in the screen is
WALLABY
Bootlader
V5.22
GSM OK
my Base ROM is 4.00.33 GER
I tried to cook the ROM with this base ROM and tried the steps ( Flashing with a SD card). I also downloaded the XDA tools and tried to run OSImagetool. Then chose the source file as the one
i downloaded with .nb1 extension. the chose SD card as the destination but i get this error message
"error opening device \\.\PhysicalDrive1 for writing: Access is denied.
error opening target device"
Please help me how i can restore the XDA to its original setting. I have already spend about 4 hours on this but cant get any further
ps. solved the problem.
had to use another Laptop.
dddddddd
ddddddddddd