is there any work links for rom KITCHEN OR ANY...
I killed my T-m MDA 2 trying to upgrade to 1.72.....
it now shows only USB 1.02 on the screen. Please help. I'n new and don't know ho to make tham alife again. I didn't make a ROM image from my system (((
ok, I find and cook it, but trying to copy ROM to Sd card (128 mb) with XDAtools I'm getting an error message each time. Do I need to format my SD card special way?
And! How to get to bootloader in MDA II ? Soft reset with pushing Power button doesn't help ((
Related
Dear all,
I've just erased PC Communication, by flash bootimage.
I don't know why. When I flash bootimage using itsutils, my PC Communication error, and cause USB/infrared can't connect.
The only one solution is flash ROM from SD Card.
I need CAB not EXE, so I can execute from SD Card.
Please help me.
Thanks a lot for your help
-----------
XDA I
WM2003SE
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
There is no Screen: 'SD Download' when flash ROM from SD
I have already follow this step, but when on step 8, there is no screen like this:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
On my device it's only :
WALLABY
Bootloader
V5.17
GSM OK
When I press one of XDA I button, there is no screen like that, so I can't still flash ROM from SD Card.
Please help me
Thanks a lot
--------------------
1. Download XDATools
2. Extract them at any place and run osimagetool
3. Select your Rom Image from the Source drop down menu.
4. Select your SD card (disk drive) from Destination the drop down menu.
5. Select Copy to start writing process and the tool should start writing to the card.
6. When XDATools has finished writing the image (no Infomessage) put the SD-card into your device
7. If there comes a message to format the SD-card select No
8. Hold the power button and soft reset. You'll be taken to the below screen:
SD DOWNLOAD
Card Type:
CE OS & BOOT
Press action to Download
Or
Press REC to Exit
9. Press action to download and it will start the download/restore from the SD card.
10. Follow the on screen instructions once its "Completed" which will consist of a " Hard Reset"
LumpiStefan said:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
Stefan
Click to expand...
Click to collapse
Re: There is no Screen: 'SD Download' when flash ROM from SD
I know the problem is.
My BootLoader is 5.17, and must have a card key in my SD Card to use it.
My question is how to write a card key to my SD Card, so that I can flash my ROM.
Please help me
Thanks a lot
Try bootloader downgrade
There are issues regarding re-flashing w/bootloader 5.17. I had a 5.17 too before and I tried downgrading to 5.15 that allowed me to reflash my ROM. Check this out:
http://www.romkitchen.de/
search for the topic "how to unlock your device" (Thanks to Lumpi for this one)
I have read also somewhere in the forum that allows a workaround to get pass the 5.17 bootloader, I just can't remember exactly where.
Good luck!
Re: Try bootloader downgrade
I've readed it, and downloading file from romkitchen.de is in progress.
Well, I can't downgrade 5.17 to 5.15 because my USB Connection on my XDA ROM was erased, so I can't downgrade from PC.
It should be downgraded by SD Card only.
My question is: In http://romkitchen.de there's option to download like this
How would you like your ROM?
installer EXE
zipped NK.nb1 (SD-card flashing)
zipped NK.nbf (advanced users)
I must choose zipped NK.nb1 (SD-card flashing). But is it included ROM 5.15?
IF it is included ROM 5.15, thanks God. But if not, it's useless..
Please help me...
Thanks a lot..
morph751 said:
There are issues regarding re-flashing w/bootloader 5.17. I had a 5.17 too before and I tried downgrading to 5.15 that allowed me to reflash my ROM. Check this out:
http://www.romkitchen.de/
search for the topic "how to unlock your device" (Thanks to Lumpi for this one)
I have read also somewhere in the forum that allows a workaround to get pass the 5.17 bootloader, I just can't remember exactly where.
Good luck!
Click to expand...
Click to collapse
Bootloader
Bootloader is different from the ROM. You can get Wallaby bootloader 5.15 from the ftp site:
ftp://xda:[email protected]/Wallaby/
Check this thread also:
http://forum.xda-developers.com/viewtopic.php?p=97306
This process worked for me. During that time (GSM error), I wasn't also able to connect to my PC thus downgraded my bootloader and re-flashed ROM via SD card.
Check this also
Hope this helps...
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=371&PN=1
Still problem: Can I format with MMC not SD?
Thanks for the tutorial.
I've already tried with my MMC 512MB.
But it didn't worked.
It didn't show "SD Download". There was nothing, only Diagnostic when entered Bootloader 5.17
Was it because of my MMC Card?
Should it be used SD Card?
I don't have SD Card, only MMC.
Can I use it?
Or, is there another solution for my problem?
I think, if there were a software for ActiveSync CAB on PDA, it would help to connect to PC, since my ROM couldn't connect to PC.
Or, is there any software to format MMC Card to be an SD Card?
Please help me
Thanks a lot for your support.
morph751 said:
Bootloader is different from the ROM. You can get Wallaby bootloader 5.15 from the ftp site:
ftp://xda:[email protected]/Wallaby/
Check this thread also:
http://forum.xda-developers.com/viewtopic.php?p=97306
This process worked for me. During that time (GSM error), I wasn't also able to connect to my PC thus downgraded my bootloader and re-flashed ROM via SD card.
Click to expand...
Click to collapse
Already Done. It worked. Thanks a lot
Dear all,
:lol:
I'm very happy today. It worked for me.
Thanks a lot for your support.
I'm great to be in this forum.
Thanks a lot.
At my explanation below, finally I found, I did wrong procedure.
I inserted my MMC when it was off, then full reset
In the tutorial, it was not mentioned detail.
The right procedure: insert SD/MCC when it is on, then full reset.
But anyway, it worked, I love my XDA.......
God bless you all.
samjeff said:
Thanks for the tutorial.
I've already tried with my MMC 512MB.
But it didn't worked.
It didn't show "SD Download". There was nothing, only Diagnostic when entered Bootloader 5.17
Was it because of my MMC Card?
Should it be used SD Card?
I don't have SD Card, only MMC.
Can I use it?
Or, is there another solution for my problem?
I think, if there were a software for ActiveSync CAB on PDA, it would help to connect to PC, since my ROM couldn't connect to PC.
Or, is there any software to format MMC Card to be an SD Card?
Please help me
Thanks a lot for your support.
morph751 said:
Bootloader is different from the ROM. You can get Wallaby bootloader 5.15 from the ftp site:
ftp://xda:[email protected]/Wallaby/
Check this thread also:
http://forum.xda-developers.com/viewtopic.php?p=97306
This process worked for me. During that time (GSM error), I wasn't also able to connect to my PC thus downgraded my bootloader and re-flashed ROM via SD card.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Nice to hear that
Nice to hear that samjeff. Let's all continue to enjoy our old, old Wallabys.
Hi guys,
i'm new here and new to the Hermes and window mobile....
so, i want to upgrade my wm6 to wm6.1 but I'm stuck here...
i want to try myself but i dont want to make a mistake....
i already read and do the hard-spl guide http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26 ( my spl already 2.10.olipro )
and read through the ROM Upgrade Guide http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=17&Itemid=26
wat should i do now? I'm totally confused.....
sorry and thx in advanced
I think I had similar problems when I started...
Make sure you have microsoft .net framework installed...
Linky...
Version 2.0 will do...
argentocruz said:
I think I had similar problems when I started...
Make sure you have microsoft .net framework installed...
Linky...
Version 2.0 will do...
Click to expand...
Click to collapse
already installed but it not fix the problem....
Use the sd card method.
1. Backup sd card - format FAT32. Copy .nbh file onto it (from rom you want). Rename .nbh file to hermimg.nbh . SPELLING IS IMPORTANT...
2. Insert sd card into Hermes and reset into bootloader - hold power, ok button above flywheel and reset with stylus. Hold ALL buttons in until you get to bootloader.
3. As long as you have Hard SPL V7 installed it should work, follow the prompts.
The sd card MUST be 2Gb or less, it must be formatted FAT32 (default is FAT) and you MUST have both a charged battery and Hard SPL V7 installed.
Cheers...
hey guys i donno wads the problem but my PC is not running the RUU??
when i double click to execute it just shows no response..i mean this is strange..i found it when i downloaded sumits new ROM 23004 v6(old Gene) and i wanted to get it running on my Gene but then i faced this problem..
And the bigger problem is my camera button is malfunctioning at times when i press it,it gets stuck inside i donno y this happened coz i rarely use my camera and hence it has been pressed very rarely & also when i try the storage card method for this ROM 23004 v6 it just shows checking SD contents and den suddenly goes to the Bootloader mode..
I m Stuckup coz i had planned to change and test the upcoming ROMs in future ??
Can any of you guys provide me a solution??
chigz said:
hey guys i donno wads the problem but my PC is not running the RUU??
when i double click to execute it just shows no response..i mean this is strange..i found it when i downloaded sumits new ROM 23004 v6(old Gene) and i wanted to get it running on my Gene but then i faced this problem..
And the bigger problem is my camera button is malfunctioning at times when i press it,it gets stuck inside i donno y this happened coz i rarely use my camera and hence it has been pressed very rarely & also when i try the storage card method for this ROM 23004 v6 it just shows checking SD contents and den suddenly goes to the Bootloader mode..
I m Stuckup coz i had planned to change and test the upcoming ROMs in future ??
Can any of you guys provide me a solution??
Click to expand...
Click to collapse
Try downloading a fresh copy of RUU (you can find it on the first page of Ramersonw's cooking tutorial page.
Regarding camera button: Could be dust or something. Try cleaning up the Gene with a hard brush or something.
If your card is greater than 1 GB, SD Card update method will not work.
Addicted2xda said:
Try downloading a fresh copy of RUU
If your card is greater than 1 GB, SD Card update method will not work.
Click to expand...
Click to collapse
I have a 2Gb SD card wwhich i use especially for flashing and test rom for over six months. its just that the card must be formated fat32 and bigger than rom size thats it cards of any
size bigger than the rom size work...
@Chigz, check if your card is fat 32 format if not then format it..and you can use as fat32 no need to reformat it after flash..u can put your data in iy and next time you want to flash a rom just rename the rom file to geneimg.nbh and put it on th memory card no need to empty the card just be sure that there should be enough space t fit in the rom let your data be threit doesnt effect the upgrade process ..restart and hold camera button.....
@coolaj its not about FAT formatting dude i have updated around 10-20 Roms wid my same 1GB mem card and have faced no problems dude..and @addicted think i had already downloaded the fresh copy and tried the RUU but it dint work.anyway m re downloading the copy and tryin it again lets hope it works this time.. :-(
there should not be a problem if you already know how to flash via card...check the name of the rom file you have put on card
and what os u are using..
i am currently using WM 6.5 and the file name is RUU_signed.nbh..
@addicted hey dude i downloaded the RUU again no success :-(
chigz said:
i am currently using WM 6.5 and the file name is RUU_signed.nbh..
@addicted hey dude i downloaded the RUU again no success :-(
Click to expand...
Click to collapse
If flashing through card rename it to geneimg.nbh restart and hold camera button
whats the os of pc..
windows XP with Service pack 2
hey guys tahnks for your time and advices..actually my mem card just needed a format dintformat it since a long long time did it and now its performing the storage card update style thanks alot guyz..coolaj & addicted both thank u.
chigz said:
hey guys tahnks for your time and advices..actually my mem card just needed a format dintformat it since a long long time did it and now its performing the storage card update style thanks alot guyz..coolaj & addicted both thank u.
Click to expand...
Click to collapse
Just an advice, Symantec EPP f***s up with RUU and the tools folder supplied by Ramersonw . So be careful with the AV, Hope you have not changed your AV (and caused this problem) ?
BTW if your problem is closed, please hit the red triangle on right of your first post to close the thread .
Thank you
I need a profeesional who could help me what to do?
First I tried to instal a new rom through using MiniSD memory card, so i got the files from a very reputable website whish is this one. the name of rom WM 6.5 21500. I entred into the bootloader, it successfully dedected the MIni SD. but the screen stoped i was not able to make a choice through the menu.
So i removed the battery then the phone doesn't want to open.
Plz can any one help me, by just telling me what to do.
islamaburahmah said:
I need a profeesional who could help me what to do?
First I tried to instal a new rom through using MiniSD memory card, so i got the files from a very reputable website whish is this one. the name of rom WM 6.5 21500. I entred into the bootloader, it successfully dedected the MIni SD. but the screen stoped i was not able to make a choice through the menu.
So i removed the battery then the phone doesn't want to open.
Plz can any one help me, by just telling me what to do.
Click to expand...
Click to collapse
Repeat the process, but instead instal one of these great ROM's from here to your device.
Obelixossauro said:
Repeat the process, but instead instal one of these great ROM's from here to your device.
Click to expand...
Click to collapse
as i have told you that he does not want to open, i tries several times to enter into the boot loader using a key combination of holding record+volume+restart. the results are the same======> blank screen
How to Install new ROM - Atom Life
Buddy,
Below is the guide...hope this helps.
http://forum.xda-developers.com/showthread.php?t=535064
is ur WM6.5 21500 file is AL1.DIO or something else?
what is ur SDcard size? is it larger than 2G?
is ur SD card properly formatted to FAT partition?
please provide some infos....
oza_crazy said:
is ur WM6.5 21500 file is AL1.DIO or something else?
what is ur SDcard size? is it larger than 2G?
is ur SD card properly formatted to FAT partition?
please provide some infos....
Click to expand...
Click to collapse
my WM6.5 is 23089... is use 2GB card (Kingston) and formatted....try changing to a branded miniSD card.
juliuscezar said:
my WM6.5 is 23089... is use 2GB card (Kingston) and formatted....try changing to a branded miniSD card.
Click to expand...
Click to collapse
well... i know...
thanks for sharing. but i'm asking those question to Islamaburahmah.
in fact.. i always use V-Gen 512Mb for upgrading.
never fail.
even a "half dead" ATOM/ATOM EXEC have been fully recovered by my Luvly V-gen 512Mb. no need for JTAG unless a real Brick which can't entering bootloader at all. (did a little trick on ATOM wiki plus some improvisation to push the device entering bootloader)
hehehe....
yesterday i have revived a "stuck in DSUU Mode" Atom Life due to a Failed upgrade process from PC. (the PC is restarting itself when My Friends Running the official WM6 .EXE ROM Updater (get it from www.seeo2.com)
Hello everybody!
I hope you can help me.
I got HD2 European.First when i unpack it,it was the official firmware 1.66,i downloaded the last one,and flashed it,after i made HSPl.It was good,but the custom that i was downloaded was a bit buggy,so i wanted to make an back up to old,official.I tried to flash it form my sd card,but here starts the most weird thinks.Its not flashing from sd card.I removed the HSPL,by the HSPL method and chose the 2.08.0000(from some forum told me to do that,to remove hspl)
But now i got memory bag,i cant install any program because there is no memory.
Please help me,how can i flash it with original firmware,to make it as it was from the shop?
Why its not flashing from sd card?(i tried on 3 sd cards,but still nothing.....)
I see the boot,starts the loading for a sec,and again boot.
Thx to everyone who can help me.
(I got the last firmware,boot 2080000)
anyone?
Please???
Put the phone into Bootloader Mode (with phone off, press and hold the Volume Down button, then tap the Power button). what does it display?
What size of SD card did you try to use to do the flashing with?
iannius said:
Hello everybody!
I hope you can help me.
I got HD2 European.First when i unpack it,it was the official firmware 1.66,i downloaded the last one,and flashed it,after i made HSPl.It was good,but the custom that i was downloaded was a bit buggy,so i wanted to make an back up to old,official.I tried to flash it form my sd card,but here starts the most weird thinks.Its not flashing from sd card.I removed the HSPL,by the HSPL method and chose the 2.08.0000(from some forum told me to do that,to remove hspl)
But now i got memory bag,i cant install any program because there is no memory.
Please help me,how can i flash it with original firmware,to make it as it was from the shop?
Why its not flashing from sd card?(i tried on 3 sd cards,but still nothing.....)
I see the boot,starts the loading for a sec,and again boot.
Thx to everyone who can help me.
(I got the last firmware,boot 2080000)
Click to expand...
Click to collapse
Hi
Can you flash via your computer with active sync or windows mobile device center?
Its better than using the sd card, as the micro sd i had was corrupted.
If you need stock roms : http://forum.xda-developers.com/showthread.php?t=623283
Russ