xda 2 gone to serial/usb bootloader and is stuck .
im a nub and need help to revive this xda2
any help or pointers would be apperciated
Take a look at my post here. It may help you.
dcs ive been round and round in circles mostly ending up at your thread
cheers for that and great work
i learnt quite a bit and used your post to check the rom files i had and set them to o2 insted of cdl .
problem turned out to be me USB and as soon as i used me lappy all went well .
so for future referance 112 error is usb communication problem
Tnx to everyone here , without you i would have given up on me lovely xda 2
keep up the good work
Glad you got sorted
Out of interest, what was the problem with your USB?
Hi got the same error, and I don't have any laptop. Now I am stuck!!
Any suggestions?
Thanks,
Claudio.
claudioita said:
Hi got the same error, and I don't have any laptop. Now I am stuck!!
Any suggestions?
Thanks,
Claudio.
Click to expand...
Click to collapse
First things to check are that you have your device connected via the USB cradle plugged directly into a USB port on your PC. Do not use a USB hub. Also make sure that the power supply is plugged into the cradle.
Still no luck, now I am trying to revitalize an old notebook: reinstallink windows 98, outlook 98 activesync and so on (burning all the software on a CD...what a pain).
and
yes now it seems working......Stage 2 at the moment.
Very strange , never had any problem with USB on my desktop so far...
Related
Please help! I have a Softbank HTC Tytn and just came across this amazing forum today. I'm a techno-literate person so this is even more frustrating... I simply cannot get Activesync (or my laptop for that matter) to recognize my Tytn...
When connected via USB it appears under Network Adaptors in my Device Manager as "Windows Mobile-based Device #3" and has the ! because it has no drivers.
I'm using Activesync 4.2 worldwide English version downloaded from the Microsoft site.
Please help me, I became very excited at the prospect of unlocking this awesome phone but then was crushed to find I couldn't even begin the first step!
I have the USB cable plugged directly into the laptop, not via a passthru like a hub, and I have tried it in multiple ports without success.
Save me guys, please!
Perhaps my problem is that I don't have a driver for the device that allows Windows XP to recognize it?
Could someone please post a link, or the file itself, of the driver you use for your HTC?
You should not need any special drivers just for activesync or usb-serial connections to the device.
Drivers are only needed if you want to use it as a modem.
then has anyone else had this problem? do you have any suggestions pof? this is driving me nuts...
Shaderach said:
then has anyone else had this problem?
Click to expand...
Click to collapse
Never heared before.
Shaderach said:
do you have any suggestions pof? this is driving me nuts...
Click to expand...
Click to collapse
Disable activesync if it is connected, put the device in bootloader mode and try to connect to it using mtty. If you get the "USB>" prompt you can do everything, you don't need activesync at all for unlocking or flashing roms, everything can be started with the device in bootloader mode.
if it sheds any light on the problem, when i plug it in instead of the usual "do-doo" rising intonation sound you get with a successful USB interface, i get a "duhduhduh" meaning it's connected, but not recognized...
ok i'll try that, sorry i wasn't aware that getting activesync to work wasn't a prerequisite for the other steps
i've never felt so stupid
i've downloaded mtty, and read and reread the wiki
my hermes is in bootloader mode, and mtty connects on port 3 but i don't get a USB> prompt, i just get a window named "COM3 115200 N-8-1" and a nice empty white space
i have no idea what to do now
i was planning on following this seemingly effortless writeup/summary by okinz:
http://forum.xda-developers.com/showthread.php?t=280566&page=9
but now i've got nothing.
i'm really sorry to bother you, but please don't give up on me!
i cannot make a connection using USB with mtty btw... forgot to include that
1) dumb question: did you select "USB" on mtty drop down list?
2) Do you have another computer where you can try?
3) Which windows version are you using?
pof said:
1) dumb question: did you select "USB" on mtty drop down list?
2) Do you have another computer where you can try?
3) Which windows version are you using?
Click to expand...
Click to collapse
1) yes, no connection
2) i just tried just plugging in the Tytn on my roommate's laptop, he got a different usb message, windows recognized it as a "Generic NDIS device" but failed to install it for lack of driver, is this what is supposed to happen? mine doesn't do this at all
3) windows XP SP2
update - just rebooted for about the 10th time and this time it recognized it as an NDIS and activesync has found it
i guess it was just a windows thing... *shrugs* i'll post again once i've tried the next steps
thank you pof, thank you very very much for sticking with me
Shaderach said:
thank you pof, thank you very very much for sticking with me
Click to expand...
Click to collapse
no problem
glad you solved the issue
i just want to let you know that i've got everything working and fully converted now
please close this thread, and know that everyone here has my heartfelt thanks
Hi there,
I upgraded to WM5 but wanted to downgrade to WM2003. But halfways the downgrade the PDA hung. The only thing I can see in the screen is Serial at the top and v1.06 at the bottom. When I put the PDA in the cradle, Serial changes into USB. When I try to install firmware from a ROM, after a while I get an Error 101: Connection Error. I think that in some way the connection cannot be esthablished between cradle (PDA) and the computer.
Trying a soft or a hard reset doesn''t seem to do anything.
Can anyone help?
MDA II
i have the same problem. it keeps on giving me a connection error. please can some one help.
the same problem with SPV M1000. anyone have the solution?
do a hard reset guyz by this method
HOLD DOWN UR POWER BUTTON+RESET (pin at bottom)..u will see 1.06 or what ever ur bootloader version is at bottom and at top u will see SERIAL..when u connect it to USB it will change to USB....and VOILA !!!
Happy Flashing
Same Problem
Did as you said and my computer doen't pick up the connection through the cradle. HELPPPPPPPP!!!!!!
prob
HERE already tried to hardreset and then trying flashing
but can't sucess
The same problem..
we are on the same trouble...
until now, there's no way to resolve this problem,
the lucky if we can connect to PC,
i think its the connector problem,
maybe using a new sync cable rather then the cradle then
the cradle was always hit or miss for me
but i still had my wallaby cradle which always worked
Rudegar said:
maybe using a new sync cable rather then the cradle then
the cradle was always hit or miss for me
but i still had my wallaby cradle which always worked
Click to expand...
Click to collapse
I have tried about 3 different cables and the cradle one.
and so tried to 3 different PC's to connect and got same error
btw, thanks...
From what I've seen so far problems can be caused by:
1. A firewall needs configuring or temporary disabling.
2. The usb connection shouldn't be through a hub but straight to the usb on the motherboard.
3. Dubious connection to the cradle.
rhilton said:
From what I've seen so far problems can be caused by:
1. A firewall needs configuring or temporary disabling.
Click to expand...
Click to collapse
my firewall is active exception activesync service
some time disable
2. The usb connection shouldn't be through a hub but straight to the usb on the motherboard.
Click to expand...
Click to collapse
i have modding motorola like e398, e1, e2, L7, v3i etc before
i never use USB-hub, i have 8 port USB straight to motherboard,
3. Dubious connection to the cradle.
Click to expand...
Click to collapse
i dont understand about this (dubious ?)
when dopod 838 friend connected to my PC it was OK, no problem,
thanks rhilton
no pc usb connect
Have checked your phone connector? it happened to me once:1 pin was out and no way to sync !!!
CENTER]ion[/CENTER]
imamlab said:
my firewall is active exception activesync service
some time disable
i have modding motorola like e398, e1, e2, L7, v3i etc before
i never use USB-hub, i have 8 port USB straight to motherboard,
i dont understand about this (dubious ?)
when dopod 838 friend connected to my PC it was OK, no problem,
thanks rhilton
Click to expand...
Click to collapse
Pls help
Have d same problem and i've tried all these but no change. Any newer ideas ?
Pls help
Have d same problem and i've tried all these but no change. Any newer ideas ?
Pls help
Have d same problem and i've tried all these but no change. Any newer ideas ?
Hi Everyone
First of all I'd like to thank everyone who contributes to this wonderful community. It made it very easy for a complete newcomer like me to install the Modaco custom rom on my hero and I've found answers to nearly all my other queries in the forums here.
I now have a problem I can't fix though and was hoping for some advice or help.
When I plug my Hero into my computer via the USB cable Windows has now started saying "USB device not recognised" and the phone does not acknowledge the connection other than charging. The error message says "One of the USB devices attached to this computer has malfunctioned and Windows does not recognise it".
I've tried all the USB ports and other USB devices and they work fine so I think it must be related to the phone. Tried powering off the PC and phone numerous times but hasn't helped.
I'm confused as it was working fine until recently and I can't think of what I've changed.
Can anyone help or offer any suggestions?
Thanks!
Just realised I've put this in completely the wrong forum. Sorry!
Can it be moved or should I repost in the correct forum?
Cheers
Thread moved
to Q&A
hope this helps
Thanks Liamhere.
Update- tried it on my work PC with same result.
I guess it confirms it's either the wire or the phone?
IainDM said:
Hi Everyone
First of all I'd like to thank everyone who contributes to this wonderful community. It made it very easy for a complete newcomer like me to install the Modaco custom rom on my hero and I've found answers to nearly all my other queries in the forums here.
I now have a problem I can't fix though and was hoping for some advice or help.
When I plug my Hero into my computer via the USB cable Windows has now started saying "USB device not recognised" and the phone does not acknowledge the connection other than charging. The error message says "One of the USB devices attached to this computer has malfunctioned and Windows does not recognise it".
I've tried all the USB ports and other USB devices and they work fine so I think it must be related to the phone. Tried powering off the PC and phone numerous times but hasn't helped.
I'm confused as it was working fine until recently and I can't think of what I've changed.
Can anyone help or offer any suggestions?
Thanks!
Click to expand...
Click to collapse
Try to download the HTC drivers from the HTC support or Android 1.6 SDK and reinstall the USB driver again.
Thanks for your suggestions and anyone else who has been racking their brains for me.
It was, after loads of fiddling with settings and drivers etc aproblem with the USB wire.
My new one arrived in the post and now the phone syncs up fine. Phew!
Old wire is now relegated to "charging only" duties.
hey everyone I am wondering if you are able to help me.. I recently upgraded to modacos custom rom V3. I have been using it for a while now an during that time i have had to wipe my laptop, i lost everything on there.. When I rebooted the laptop an tried to connect my Hero to it I am unable to mount my phone.. It doesnt show up on the notifications screen, i have installed HTC sync an rebooted the phone an still nothing. If any1 is able to help me thatd be great..
Kind Regards, Brett.
please anyone who is able to help me that would be greatly appreciated...
Check if 'HTC driver' is installed as well; you should be able to find it in the "HTC" folder in your start menu if it is. If you can't find it, try reinstalling HTC Sync to make sure the drivers are installed.
hey steven, yeah the driver is installed.. I am going to uninstall HTC sync an re download it , hopefully it works after that. if anyone else has any ideas thatd be great.. thanks guys
Have you tried:
1. Attaching the device to a different PC
2. Using different USB cables
Note that several people on these forums have found that changing cable has worked for them, even though the cable that didn't work seemed to be fine for other devices, so it is definitely worth a try.
Regards,
Dave
hey mate, i just reinstalled htc sync & no luck there.. I have already tried connecting on other computers an no luck there, i will look for another cable next week sometime an hopefully that helps.. thakns for your help.. cheers, brett.
i'm having the same trouble!!!!, it won't mont either on my mac or pc , any help please!!???
well i ended up buying a new usb cable an its mounting fine know.. hope this helps for anyone in the future.. cheers
Glad you got it sorted out with a new cable.
For anyone else having problems with mounting, make sure you're connected to a USB 2.0 port. I had the same problem but everything started to work once plugged in to USB 2.0
Hi everyone, sorry I have read and tried so many different things on this forum I'm in need of more advanced help... someone that can spare a little time... (I burned out the mother board in my vibrant, got a new one out of another vibrant that was working) it is on Froyo v2.2 android no root... cant get it to connect to the computer says "new device not recognized" goes into installing and everything fails... I have my own USB ports downloaded I have installed both 64bit and 32bit... I'm on Windows 7 home premium 64bit OS I have uninstalled and reinstalled several times and tried to let windows update install the driver... can someone else help me with this I would like to odin back to stock.. Thanks and hope to hear back soon!
PS
i have been flashing roms on my phone since 2010 i somewhat know what im doing but never had this problem occur before...
Hi,
Hope you have the correct drivers installed. Please check another USB cable and/or different port if possible
tc
haarsh said:
Hi,
Hope you have the correct drivers installed. Please check another USB cable and/or different port if possible
tc
Click to expand...
Click to collapse
I have the correct drivers... i finally got it into download mode and connected to computer... but this didn't solve my deli-ma... now it keeps hanging on modem and factoryffs....is there a way to fix this?or work around this...?
Btw i have tried 5 differnt odins, one click java file, and heimdal nothing is freaking working all just keeps freezing up... and i have redownloaded all my files so many times that i might lose my mind if i have too again....
MysticAoh said:
I have my own USB ports downloaded
Click to expand...
Click to collapse
Just to clarify, a usb port is the slot on your pc that you actually plug your usb cable into. Usb drivers are what you downloaded.Try running odin as administrator and use a different usb port on your pc. Odin can be tricky sometimes, give it a couple more tries.
Sent from my SGH-T959 using Tapatalk 2
iTz KeeFy said:
Just to clarify, a usb port is the slot on your pc that you actually plug your usb cable into. Usb drivers are what you downloaded.Try running odin as administrator and use a different usb port on your pc. Odin can be tricky sometimes, give it a couple more tries.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
lmao ic ic but i have reinstalled both drivers work all good it connects inless i switch usb ports... the ports (i reinstalled them today) along with the drivers... i can get almost 90% of the flash done... it is freezing at the end of FactoryFS the last little quarter freezes up and makes my phone screen change colors... i have seen all the colors i think now... blue, yellow, red, green, purple, grey, and pixeled
MysticAoh said:
I have the correct drivers... i finally got it into download mode and connected to computer... but this didn't solve my deli-ma... now it keeps hanging on modem and factoryffs....is there a way to fix this?or work around this...?
Btw i have tried 5 differnt odins, one click java file, and heimdal nothing is freaking working all just keeps freezing up... and i have redownloaded all my files so many times that i might lose my mind if i have too again....
Click to expand...
Click to collapse
try running ODIN as an administrator if u r using windows 7
thread that I found : http://forum.xda-developers.com/showthread.php?t=798020