After a hard reset of my XDA, i had to reset my band. Now only KPN and Vodafone are found, also in Amsterdam were from Telfort a good signal exists. As i have a abonnement from Telfort, it is not possible to use the GSM possibilities of my XDA. Who knows the answer to my problem????
I have T-Mobil MDA and after flash with PPC2003 I have this problem.
I flash only Radio Stack v4.21 and GSM worck OK
Related
Hi everybody,
my WM2003 MDA (with T-Mobile ROM) worked perfectly with german E-Plus network but after switching to O2, it experiences very low or no signal strength at known places where signal strength usually is very good. I'd like to flash a new Radio version but I'd like to avoid catching more or other trouble as I've read about here. Can someone recommend a well working radio version? My current system is:
ROM-Version: 4.00.33 GER
Radio-VErsion: 3.23.00
THX in advance
Sven
1. Is O2 XDA is the same models like Siemens SX65 AT&T wirelles?
http://www.pdagold.com/hardware/detail.asp?d=124
.: Extra info & Model comparison
Sold in Central Europe as O2 XDA by O2
SIM-free O2 XDA sold by Expansys
Sold in North America as Siemens SX56 by AT&T
Sold in Sweden as Qtek 1010, previously known as Joey
Sold in several countries as T-Mobile MDA by T-Mobile
2. When i download upgrade in http://www.my-xda.com/xda_soft.html and i install to my PDA Siemens SX65 AT&T, now my PDA doesn't have any signal event i change my SIM Card??
this is the name file : Radio_Stack_Upgrade_v421 and Radio_Unit_Upgrade_v31703, when i download Radio_Stack_Upgrade_v421 then after restart, my PDA is no signal, so i don't continue to install Radio_Unit_Upgrade_v31703.
Note: when i install, my sim card still plug-in.
the network only :
ST-GSM-SGP
ST-GSM1800-SGP
Globe
AIS GSM
OPTUS
AirTel
SPICE
dont have TELKOMSEL (indonesia).
Can u help me to fixed my PDA,???
What model do you have? Check the rar sticker...
PW10A are for 900/1800 MHz
PW10B are for 900/1900 MHz
Stefan
different name
LumpiStefan said:
What model do you have? Check the rar sticker...
PW10A are for 900/1800 MHz
PW10B are for 900/1900 MHz
Stefan
Click to expand...
Click to collapse
opps...thank for your advice, now i have different name in my PDA, in the sticker label is PW10B1 and in my device information Identity the model no is PW10A1... ehm? i need your advice again to fixed my siemens PDA, thank you..
gohengky said:
opps...thank for your advice, now i have different name in my PDA, in the sticker label is PW10B1 and in my device information Identity the model no is PW10A1... ehm? i need your advice again to fixed my siemens PDA, thank you..
Click to expand...
Click to collapse
Different names are no problem.
It depends on what rear sticker say. So you have a PW10B device. Tehreforen 4.xx Radio Versions do not work try the 6.xx
Also you have to ensure your provider works either on 900 or 1900 MHz....
Stefan
LumpiStefan said:
Different names are no problem.
It depends on what rear sticker say. So you have a PW10B device. Tehreforen 4.xx Radio Versions do not work try the 6.xx
Also you have to ensure your provider works either on 900 or 1900 MHz....
Stefan
Click to expand...
Click to collapse
Mr. Stefan..
i am confused.., ehm, so i must try 4.xx radio vers if doesn't work so i must try 6.xx , were i can found it?? http://www.romkitchen.de/ or where ... please help me, replace PW10A1 to PW10B1 again ..
now my device information after i change is :
bootloader V5.22
rom vers : 3.17.03 ENG
rom date : 05/15/03
radio vers : 4.21.00
Protocol vers : 32S54
Model no .: PW10A1
Platform : pocket PC
Is that correct ??
my sim card is TELKOMSEL - indonesia , GSM Dual Band (900 & 1800),
http://www.telkomsel.com/web/company_profile
Dear Mr. Stefan,
i really need advice ...
thank you.
PW10B devices require 6.xx RSU-Version. You should You should then also fix the bandwith to 900 MHz in Bootloader
http://wiki.xda-developers.com/index.php?pagename=ChangingBandsWithBootloader
RSU Version can be found on www.romkitchen.de/tools/
The displaying of PW10A in your system depends on the ROM and is complete unimportant.....
Stefan
now is fixed
LumpiStefan said:
PW10B devices require 6.xx RSU-Version. You should You should then also fix the bandwith to 900 MHz in Bootloader
http://wiki.xda-developers.com/index.php?pagename=ChangingBandsWithBootloader
RSU Version can be found on www.romkitchen.de/tools/
The displaying of PW10A in your system depends on the ROM and is complete unimportant.....
Stefan
Click to expand...
Click to collapse
Dear Mr. Stefan
Thanks for your advice, now my PDA Siemens SX65 AT&T is work again, But i am not follow your instruction..i use the other way..now i want to share my step to fixed my PDA :
1. Download Radio Unit 6.24 version, find at : http://www.yorch.net/ ---go to --- http://www.yorch.net/upgrades.htm
USA T-mobile Latest Radio Stack (Unofficial)
RU 6.24.00
2. Install RU 6.24.00 in to your PDA,put in /windows find in Windows Explorer.
3. Wait for a second, and then will search the network...
4. Success.....
my device information is PW10A1 and not PW10B1 (the label in the back pda) how come is still can work?? But,anyway its Ok,because my phone is work again..
Thank you for your advice Mr. LumpiStefan.
That is very interesting.I like it very much.where can i find it?
________________________________
Rm files
to : mukojin776
you can find at : http://www.yorch.net/ but i dont recommend you to modify your phone, if you have commitment, than do it.. and i am not & dont have responsible if your phone is death..
You can ask Mr. Lumpistefan advice if you want to upgrade or modify your phone.
Enjoy your explore...
Thank you.
How to use SX56 with Airtel(India)?
AirTel (India)? what happen with that? if your XDA (SX56) can work, so??? what do mind by that? your phone is blocked??or doesn't have signal?? can explain about that??
Greetings,
Yesterday i upgraded my Hermes to WM6 from HTC website, everything went fine, but since i cannot recieve any calls but can call and everything else is fine, i'm new in this but here are more details:
Rom version : 3.54.256.2
Rom date : 07/06/07
Radio version : 1.47.00.10
Protocole version : 32.80.7020.20H
Ext. rom version : 3.54.256.103
I live in France and using Bouygues Telecom, i read on a french forum that the problem might be this radio version with Bouygues Telecom.
Are there any from France that have resolved this problem? is it easy to change the rom? and is there any guide on this great forum to learn how to do that?
thank you for your help!
Curious Jack
You can change just the Radio ROM part. What was your old radio version?
Here is the Radio Upgrade Only Wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
Unfortunally i did not check it out before upgrading to WM6, and i just installed version 1.50.00.00 and nothing has changed, i can call but when i'm called or it rings busy or its straight to answering box.
thanks!
Curios Jack
Hi,
if like me you are in France with Bouygues Telecom, here are the original versions (as I was looking for switching to WM6 and now I'm asking myself some questions...)
ROM : 1.18.256.2
Radio : 1.03.03.10
Protocol : 32.34.7010.01H
I hope it will help you get back to a working phone...
Regards
Try installing radio version 1.40.30.00.
I have a similar problem on the network I am currently on with radio 1.41.00.10 and any version higher so far.
I can summarize the problem I faced as follows - if there is a data connection active, then the phone will not be able to receive an incoming voice call, unless the caller keeps trying maybe like 5 to 10 times.
The network I am on now is DTAC in Thailand, using EDGE for data.
Once I downgraded to 1.40.30.00, even with an active data connection, the incoming voice call still came through.
HP_mad said:
Hi,
if like me you are in France with Bouygues Telecom, here are the original versions (as I was looking for switching to WM6 and now I'm asking myself some questions...)
ROM : 1.18.256.2
Radio : 1.03.03.10
Protocol : 32.34.7010.01H
I hope it will help you get back to a working phone...
Regards
Click to expand...
Click to collapse
yes i am in France with Bouygues Telecom, i think you should wait a little more till HTC and bouygues people find a solution.
And MERCI for the original versions!
C.J
Curious Jack said:
Greetings,
Yesterday i upgraded my Hermes to WM6 from HTC website, everything went fine, but since i cannot recieve any calls but can call and everything else is fine, i'm new in this but here are more details:
Rom version : 3.54.256.2
Rom date : 07/06/07
Radio version : 1.47.00.10
Protocole version : 32.80.7020.20H
Ext. rom version : 3.54.256.103
Click to expand...
Click to collapse
I had a same problem after uprgaded my Vario II to WM06 HTC ROM. I could send/receive msg and call out, but not received any call
I tried these combination:
- Upgraded to WM06 HTC ROM and keep the original radio version (1.48): wouldn't work
- Upgraded radio version to 1.50: wouldn't work
Solution:
- Downgraded radio version to 1.41. My device fine now
My network:
- Vodafone New Zealand
Hope it help
Thanks for sharing ...
I solved my problem by downgrading one by one the first one that worked is the 1.41.00.10 so i will try it and see ...
What a relief ....
thanks again
CJ
thanks xupcua and glad to read that it works for you Curious Jack.
I think I'll wait this weekend before upgrading, I need my phone for work
Thanks to all for their help. Great job !
update done and all working good (at least for now...)
I've tried all radio versions from 1.51. The only one which works is 1.41. With others, no incoming calls.
Well, it definitely seems to be a Bouygues issue, as I am in the same situation.
Back with 1.41, I can call and receive calls, but no internet access ! Are you in the same case ?
Olpetit
Internet access through GPRS is working good.
Can't try Wifi as my Linksys wifi router just died 2 weeks ago and I'm back with a wired only Netgear router.
I will go and get a new Wifi router on saturday. I'll post my results then.
HP_mad
Hi guys,
I have installed radio rom 1.40 : the gsm works fine, Edge gprs too, but now i have wifi connection problem, its impossible to get connected ... i discovered that if i put the gsm off the wifi is connecting, but not with the gsm on
I dont know if its a radio rom problem or something else ...
CJ
hum if that's true I think I'll go back to radio 1.03 which was the radio I had when I bought my TyTn... and with which Wifi was working pretty good
Edit : I succeeded in connecting me to a neighbor wifi router (with his agreement). I was able to download GoogleMaps for mobile, load a few bitmaps, check my mail. All this with GSM on.
It may not be a radio relative problem. It needs more testing but my neighbor's wife said it was too late to continue
I unlocked my SPV m3100 on the weekend with pof's unlocker then upgraded to the very latest radio ROM, 1.54.3. Since then I've had 3G active on my old Orange SIM but my new O2 SIM refuses to move onto 3G -- it's stuck in EDGE.
According to the map on o2.co.uk, I'm right in the middle of a HSDPA area, so I should have coverage.
I thought as a first port of call I'd try downgrading the radio ROM to a known-good one. Can anyone either tell me what radio ROM was in the last offical O2 ROM, or if you are on O2 UK and have good experiences of a particular radio version, which version are you running?
Hello,
When I install my GSM sim, my 6815 works ok for a while but then it looses the gsm signal and telephone appears as out of service. Reset does not help at all, hard reset help sometimes.
Any ideas? Is there way to update the radio as I can do with my TyTN?
Firmware radio is: 0.33.00-RW6815-RS-070524N
The Ipaq is already updated with HP ROM 1.12.00, the same problem occured before the update.
I´m using Movistar in Argentina
Thanks in advance!
El Rober