I found that soft reset is more difficult after upgrading my XDA2 to WM2003SE v2.06.00WWE...
it always failed on boot screen...
does anyone experience the same problem?
It's not fail but take longer time to boot up.
and why the bluetooth led is blinking on booting process?
little_frog said:
It's not fail but take longer time to boot up.
Click to expand...
Click to collapse
No...it takes forever on the second boot screen and had to soft reset with stylus again and again and again...
PS: sometimes it's pretty fast to soft reset...
I have the same problem but since i uninstalled BT widcomm and disable Calligrapher on startup it only happens sometimes
i have the same problem.
workaround: turn phone off before softreset, or remove the simcard
:wink:
Workaround 2 (works every time!):
I have the 'record' button assigned as the screen rotation button.
After pressing the soft reset, I press the 'record' button until the bluetooth light starts blinking. (roughly about 10 - 15 seconds).
Hi guys,
I have the same problem, some times it takes forever and i end up soft reseting several times.
Yesterday it got stucked on the loading splash screen and the only way to get it out was to go into the bootloader(1.03) and do a soft reset to load the bbot again. i was starting to freak out.
Otherwise it's BIG improvement over WK2003, much quicker.
P.S.:Have to try the record button trick.
:twisted:
Dear all,
i experienceed this long booting for awhile till i noticed it's due to the increasing size of the DB_notify_queue database.
use checknotify.exe to clear it every now and then (especially before soft reset) as clearnotify.exe doesn't work with SE
another tip is to remove stk.lnk from startup coz it forces waiting the SIM to be ready (about 5 sec)
Where can i find check notifY
damn! I Can't change/assign hardware my button with wm2003se...it only listed button1 in settings > button, where's my other buttons?
checknotify, clearnotify : http://www.scarybearsoftware.com/ppc_cn_overview.html
tip : put clearnotify in your extended rom
darkcell said:
damn! I Can't change/assign hardware my button with wm2003se...it only listed button1 in settings > button, where's my other buttons?
Click to expand...
Click to collapse
Something similar happened to me once after a hard-reset. The "Rotate Screen" option disappeared from the keyboard shortcut list AND from the Screen control panel.
Had to hard reset again to get it back, :?
Faster Soft Reset
Try this:
1. Remove "STK.ink" from "windows/startup" folder.
2. Copy radiooff.exe to "windows" folder, then create its shortcut to "windows/startup" folder.
3. Done
Note:
Don't turn off your radio when you want to reset, as this will force the radio to be turned on, which will very much slow down the soft reset.
Related
i cant hrd rest my xda 2 i have instaled w2005 i tired pressing the cam and power holding them and presing reset with stylus but that made a bootloader to apear i pressed on kltd i donnot wt nothing happened
I've got a problem with hard reset also - I'm pressing everything as described on picture: http://forum.xda-developers.com/files/hardreset.gif but it results only in soft reset and changing date in my XDA II
When you press as shown in the picture you need to Keep all of them pressed for between 5 and 10 seconds. then you have to peek through the darkened screen and select the modes as described and then click the big button in the middle to continue.
Victor
nothing happen
nohting happen wts active and passive modes ?
hi. i want to hard reset my atom life. how can i do it?
do assist me. need it as soon as possible. thanks.
This is grabbed from another forum after a google search...
"It's normally press-n-hold the on/off button --> press the reset button.
When the green+red button command appears, let go of the on/off button and press the green n red button simultaneously.
This is the standard Atom series hard reset method. Not sure for Atom Life though"
First, Hold Power button and insert stylus into the reset hole
release power button and remove stylus. you should now see message on the screen saying about hard reset, press and hold both green and red button at the same time until. when it's done system will reboot itself.
what risk if when hard reset the batt getting low?
Hard reset normally takes less than 5 seconds to clear out your older settings. Though you better charge it before hard resetting.
hehe.. if the batt getting low and die . so how?
hendranata said:
hehe.. if the batt getting low and die . so how?
Click to expand...
Click to collapse
connect your charge, wait 5 minus then hard reset, go go
will there be any effect on the data saved in my documents and memory card?
you can read the Manual
thedonbk said:
will there be any effect on the data saved in my documents and memory card?
Click to expand...
Click to collapse
a.f.a.i.k, ther wont be any critical defects on ur mem-card n my docs.
anyway, hard-reset clears off the saved data in ur "my docs". so it doesnt matter anyway.
its better to avoid such situation wher u dont have much batt left, and still go do a hard-reset.
a hard-reset normally take onli like less than 4-5mins.
unlike flashing in new rom from dsuu mode or sd-flashing mode, wher its safe to keep a 70% lvl of batt b4 start flashing.
hm.. hold power on/off and reset ... i try twice fail.. how?
yes..same with me..how?
hendranata said:
hm.. hold power on/off and reset ... i try twice fail.. how?
Click to expand...
Click to collapse
To hard reset.
Keep the Power On button pressed. Then put the stylus in the reset hole. Dont leave the power button till you see the hard reset screen.
This is the exact way. I've tried it so many times
1. Hold the RECORD button (the one near the camera button)
2. While RECORD button pressed, with your stylus, push the softreset button (the one at the bottom, in the hole)
3. Hold both button for about 5 seconds
4. Release ONLY the soft reset button first
5. Then the screen will display some hard reset sequence
6. Then you can securely release the RECORD button
Attention, those are the step by step. Missing one sequence, and it will be failed
But, after the hard reset menu apeared, i don't know which menu to select if i need to hard reset my atom life. Any help with this?
How do I soft reset Toshiba TG01. Tried searching with my limited skills but dint get anything.
Try to search in user manual (page 22)
1. "RESET" button under back cover or
2. Press & hold power key for 15 seconds or
3. By software like that.
Thanks a lot...
Should have checked the manual. Most basic thing. With the convenience of internet we get lazy to check the old stuff.
There are a few ways of soft resetting the TG01.
1st you can use the softreset you find in programs like SPB mobile shell and Quickmenu
2nd you can use the soft reset button located under the battery cover.
or 3rd you can press and hold the power button. If the phone has locked up, I find holding the power button in for a couple of minutes turns the phone off, if its not locked up a power off window should pop up on screen.
If you meant "hard reset" then thats a different matter and I think a thread already exists for that.
You can also soft reset by removing the battery
I'm surprised that nobody has mentioned:
1) Remove the battery.
2) Count to 10.
3) Replace the battery.
Soft Reset - Shortcut
dashing_arien said:
How do I soft reset Toshiba TG01. Tried searching with my limited skills but dint get anything.
Click to expand...
Click to collapse
If you add the attached shortcut to your device (can be placed where you line, but suggest in ..\windows\start menu) this will allow you to simply tap to achieve exactly the same effect as pressing and holding the Power button. When the device has powered off, then simply press Power to restart; that is a Soft Reset.
View attachment PowerOffHint.zip
I use this app, which is also skinable. Loads of skins available to match your theme.
To avoid to have to remove the back cover when TG01 is blocked, I made a little hole in the back cover!
keep hold vol up +camera and power button and then follow instruction on your phone.... u ll loose all your data on phone.
method 1
put it in the oven for 20 mins, take it out, throw it at a wall. job done thats a soft reset.
method 2
press reset button
anwar1122 said:
keep hold vol up +camera and power button and then follow instruction on your phone.... u ll loose all your data on phone.
Click to expand...
Click to collapse
Slight confusion here.... that is a HARD reset. And as stated will loose all installed apps, settings and data (other than data on uSD Card).
Regards,
Kevin
Hi,
Just swapped my note to a Lumia. Running 12070.
I got this issue that the screen don't turn itself off when i leave the phone alone.
The time is set to one minute but nothing happens after that. If i reboot the phone it will work a couple of times as usual, but then after a bit it is the same again.
I have done several factory resets withot any luck. Btw there is something really strange with the factory reset. When i start the phone up after the reset it remembers my Nokia account name? How could that be so? It's like the reset isn't quite resetting everything.
Any ideas?
Thanks.
EDIT:
*facepalm to myself* found the error...
The camera button was half pressed down by the softcover. Now the screen functions normally
But the mystery with remembering my Nokia account after factory reset is still a big ???
soft reset with hardware button, or hard reset with phone menu?
if you really want to hard reset it, try this, hardware method:
presse volume down+power+camera 5 sec together, wait the vibration.
then stop pressing only power button but keep pressure on volume - and camera, wait reboot
tell us
fabulous69 said:
soft reset with hardware button, or hard reset with phone menu?
if you really want to hard reset it, try this, hardware method:
presse volume down+power+camera 5 sec together, wait the vibration.
then stop pressing only power button but keep pressure on volume - and camera, wait reboot
tell us
Click to expand...
Click to collapse
Actually i have tried both methods with the same result.
Very wierd.
Hi guys,
I have a major problem with my Lumia. It has the newest firm ware (12220) but for some reason it started doing strange. If the screen locks now (if you press the button on the side of the phone, or wait a while on this it does automatically) it just does not react at any tough on the screen. Then I have to reset it by using the power button and the volume down button so it restarts again. This keeps happening every time. So I tried the soft reset, hard reset but unfortunately nothing works. Is there a possibility to install the software again, maybe that works?! If yes, how do I do that?!
...same issue
Hello!
I have the exact same issue right now. Did you ever find any solution?
Kind regards,
Peter
Schilkeplayer said:
Hi guys,
I have a major problem with my Lumia. It has the newest firm ware (12220) but for some reason it started doing strange. If the screen locks now (if you press the button on the side of the phone, or wait a while on this it does automatically) it just does not react at any tough on the screen. Then I have to reset it by using the power button and the volume down button so it restarts again. This keeps happening every time. So I tried the soft reset, hard reset but unfortunately nothing works. Is there a possibility to install the software again, maybe that works?! If yes, how do I do that?!
Click to expand...
Click to collapse