After updating my (open to all networs) T-mobile MDA II from 1.60.00 GER to 1.72.170 GER with T-mobile software update software, GPRS-connection discontinued after a shirt while. Rebooting my MDA II resulted in a hanging system. So I repeated update procedure after a full reset (with 3 Buttons). Since that time each update process stoped at step 4 with "Error 114: Radio update error". (Update process could not erase radio ROM before updateing!). The same occured while trying to downgrade again to 1.60.00.
PLEASE HELP !
Related
I made a simple softreset and the xda ii stopped at the blue o2 screen with "No GSM, 1.60.00 GER"
A hardreset didn´t work.
So I pressed On/Off + Reset + Action-Button and
made a whole Update with the german rom update (it´s a german device) and when it came to erase the radio stack rom the update stopped with the message "Error 114: Radio Rom Update Error".
Then I used HimaUpgradeUt.exe and only the radio-file, but there was the same error-message.
What can I do now? Is there a way to erase and write the radio-rom or must I send the xda back to O2?
thanks
Frank
I have an Qtek 2020 (bought in Greece).
I had the 1.66 ROM installed and tried to upgrade to the 1.72WWE version dowloaded by the xda-developers ftp site.
In the installation, at the time when the program erases the previous ROM I get the following error message :
ERROR 112 : CE ROM UPGRADE ERROR
To continue the upgrade please :
1. disconnect the Pocket PC from the USB cradle
2. perform a normal reset
3. reconect the Pocket PC and restart the upgrade
tried the above procedure with the same results.
Anyone having any hints?
I had the same, trying to upgrade. Just do as the screen says (i.e.: restart the upgrade). Worked fine for me!! :lol:
done it at least four times with the same result.
The strange thing is that i performed an upgrade already to 1.66 withoutany problems a short while ago. The only difference was that I got the upgrade from my provider intead of xda-developers
Using XP, I am trying to upgrade from radio 1.16.00.00 to radio 1.20.31.10. I have followed the instructions in the Hermes Upgrade Guide to the letter. I have tried sever times, but I continue to get ERROR 114. Each time the phone says "Upgrade Radio Stack Please Wait..." and the upgrading process never moves from 0% on the desktop (yes, I closed process wcescomm.exe before starting.) I have also tried doing another upgrade right after the error 114 message, without disconnecting the phone nor reseting, but I get ERROR 150.
Any ideas would be helpful.
Ron
Current Setup:
ROM: 1.34.502.1 Cingular
Radio: 1.16.00.00
BL: 1.04
Task 32: 0
History:
1) Phone came loaded with Cingular ROM 1.34
2) Downgraded to Cingular ROM 1.30 to get BL1.04
3) SuperCID unlock automatically with HTC_Hermes_SIM_CID_Unlock_v3 (GREAT PROGRAM!!!)
4) Used SSPL-HERM.exe to change ROM back to Cingular 1.34
5) UNSUCCESSFULLY tried to upgrade Radio Version to 1.20
Well, I was doing everything right... but my computer was refusing to cooperate with me. Because I did the exact same thing on my wifes computer and it worked!!!
Thanks
Ron
Hello everyone.
I've problem while unlocking my Herm(MDA Vario II form Era). I downloaded Unlock_v3a prom forum. SPL updated succesfully to 1.40 Olipro byt while installing Radio it stuck on 0%. Then i have only bootloader screen and I install WM 6 wersion of operator (but without Radio etc because when i tried install full it stuck on 12% - radio install). Anyone have some idea what's wrong?
Maybe it is SPL case?
Thanks for replies!
Ok i want to refresh my Thread. I was reading many articles about Hermes and my case now is like that.
My Radio is working i can talking by PDA but only with cards of it's operator, when i'm trying install Radio installation stops on 0% i try to install 1.14, 1.18 Radio but always with the same result.
My IPL is 1.01
SPL is 1.40 Olipro
Radio ver. 1.05.02.00
Running on WM 6
Hi,
I have MDA Vario II, aka Herm300, aka Tytn ... My problem is that I've got "No GSM". So I got in forum and checked how to try to Fix it threads... So I tried by putting "Hard-SPL" and also I've tried to Upgrade "Radio", but every time when I start upgrade I recieve "Error 262" at 0%, I changed several Radio's but I had always same result. Also I've tried to downgrade to Official Rom of WM5 and it stops at 13% witn "Error 262" . So my Question is:
Is it possible that I have hardware problem not radio problem .
ATM it works fine with Schap's ROM as PDA and "No Gsm" Again ...
On Bootloader I got:
IPL-1.01
SPL-1.40.Olipro
If there is another solution that may help I'm open for advice.
classic brick...
wich one is the 262 error. (why to put the error number? write the entirely error!)
Dunno if it is brick, because I cant update with most of the roms and also I get error with every radio I try to update with ... I've tried with more than 10 radio's from the archive ...
P.S. I think it is Hardware problem + I got brick and because of the hardware problem i cant reinstal rom+radio or rom to repair brick problem ...
So wich one is the error??????
error 206 207 200768 i dont know...i have this issues too and the cprog.exe seems to be incompatible ... my cable hasnt a good contact to the usb plus the rom i had i didnt downgrade to wmoriginal in a few times...
-Mobile MDA Vario II - help my screen is four colours
Hi I have the same phone a T-Mobile MDA Vario II i ran unlock program HTC_Hermes_SIM_CID_Unlock_v3a - i must have run it wrong or something cause my phone has colours on the screen red green blue white with the ipl 1.01and spl 1.40 - it used to ipl 1.4 (ithink) and spl 2.14(i think) before i tried to run the hct_herm.....v3a.
Is my phone trashed or what can i do . when i plug in the usb cable the message at bottom goes from serial to usb but thats it - the active sysnc does not see the phone. help help help any advice welcome ( short of buy a new phone) this is my new phone i only got it a day ago.
tks