my XDAII stuck in phone view after my alarm activated. :x
would not solve by pressing red button, tap the startmenu, tap the 'x'...
the only way now is to press soft-reset.
pls advice. :wink:
my device info:
ROM 2.06.00WWE
Related
Hi!
Please help, after a bad update my MDAII does not boot!
On the Display after cold boot: NO GSM
D 1.03.00 GER
I read, that it´s posible to boot from SD-CARD.
But where i can get a working image for my SD Card.
How does it works exactly ?
Thanks
Steve
that means that the radio update failed.
if you boot your device into bootloader mode ( press power + action key simultanuously, while resetting )
put it in it's cradle,
your screen should say 'USB' on the top, and '1.06' ( or another version ) on the bottom.
and run the upgrade again.
after about 2-3 minutes the upgrade will start again.
Thans for the fast reply!
I try it but it wont work :-(
Power button + Action Key & Reset
Witch action key you mean? I tryed the button under the Power button.
Steve
steve2000 said:
Thans for the fast reply!
I try it but it wont work :-(
Power button + Action Key & Reset
Witch action key you mean? I tryed the button under the Power button.
Steve
Click to expand...
Click to collapse
Nope, action key is meant to be the four ways key! The key between the red and green button! You have to press that in the middle! That's the action key.
HEHE!
Thanks alot !!!!! -- it works !
Steve
brow, anyone knows how to format my dopod s300 besides clear storage?? i mean is there any button to format my s300
help me pls,im stuck with it
Best Regards
PO2
If it's the same as the Qtek 8500 then turn it off, hold down the 2 soft keys & at the same time press the power key. (the power key needs to be down for about 1 second. You may need to experiment with how long you need to hold down the power key). You should then see the option to press 0 to reset.
cdsh
Hi, after I've done HardSPL and put in a new Rom my phone started to everytime I open the start menu it keeps going down in that menu. After I press Up it doesn't go down in any menu at all.
Can anyone help?
the memory i´ts full so their not pass the splash screen.someone help me please to make a hard reset.i use the win 6.1 s.o thanks.
Turn Off The Phone , Keep Both Softkeys Pressed And Press The Power Button (keep Softkeys Pressed) And A Message Will Appear . Just Follow The Instructions
they not work
i try but not result,i pressed about 2 or 3 minutes but they not pass the screen "mobile operator".i think they do not have suficient memory to start the s.o.because before reboot the phone the memory avaiable it´s a 16 kbites.i think the problem it´s the memory and a hard reset resolved the problem but this group keys not result.i start to belive i´m fuc... hum hum hum!!!
reset oxygen solution
finaly i solved the problem.so for everyone they have this problem you first press the power button and wend the keyboard make light you stop press power button and press both sofkeys and not stop before appear the blak screen so you stop press the softkeys and press only the call key and wait a few moments,the welcome screen appears.the desespere hits a god incentive.tanks to everyone they try to make this site betther day by day and to florinox to.
i have a problem with my I-mate jasjam,
i use window 7 32bit
i already installed the window mobile device center 6.1 and i already download the RRUUWrapper.exe
i use this guide
1. Enter your device into tricolor screen as follows:
With one hand press and hold both keys:
- Right side top black button and
- Left side top black button (power on)
With the other hand press and release the reset button with stylus.
2. Double click on ROMUpdateUtility.exe and proceed as follows.
but when im on detection, the ROMUpdateUtility.exe said cannot find the connected mobile
what should i do??
shaminator69 said:
i have a problem with my I-mate jasjam,
i use window 7 32bit
i already installed the window mobile device center 6.1 and i already download the RRUUWrapper.exe
i use this guide
1. Enter your device into tricolor screen as follows:
With one hand press and hold both keys:
- Right side top black button and
- Left side top black button (power on)
With the other hand press and release the reset button with stylus.
2. Double click on ROMUpdateUtility.exe and proceed as follows.
but when im on detection, the ROMUpdateUtility.exe said cannot find the connected mobile
what should i do??
Click to expand...
Click to collapse
do not check the usb connections on the column in the WMDC connection options, or KILL WCESCOM.exe in Task Manager on your computer