i have a problem with my I-mate jasjam,
i use window 7 32bit
i already installed the window mobile device center 6.1 and i already download the RRUUWrapper.exe
i use this guide
1. Enter your device into tricolor screen as follows:
With one hand press and hold both keys:
- Right side top black button and
- Left side top black button (power on)
With the other hand press and release the reset button with stylus.
2. Double click on ROMUpdateUtility.exe and proceed as follows.
but when im on detection, the ROMUpdateUtility.exe said cannot find the connected mobile
what should i do??
shaminator69 said:
i have a problem with my I-mate jasjam,
i use window 7 32bit
i already installed the window mobile device center 6.1 and i already download the RRUUWrapper.exe
i use this guide
1. Enter your device into tricolor screen as follows:
With one hand press and hold both keys:
- Right side top black button and
- Left side top black button (power on)
With the other hand press and release the reset button with stylus.
2. Double click on ROMUpdateUtility.exe and proceed as follows.
but when im on detection, the ROMUpdateUtility.exe said cannot find the connected mobile
what should i do??
Click to expand...
Click to collapse
do not check the usb connections on the column in the WMDC connection options, or KILL WCESCOM.exe in Task Manager on your computer
Related
i'm stuck in boot load and can't restart plzzz help
"1. Start your device in bootloader mode by pressing and holding down:
DPad + PowerButton + ResetButton
After a second release ResetButton, then release the rest of them.
Your screen will show word "Serial" at the top.
You are in bootloader mode now.
2. Place your device in the cradle, ensuring that the cradle
is plugged directly into a USB port on your PC and not to a hub
and that the power supply is connected to the cradle.
It is also a good idea to disable any screensavers on your desktop PC.
Once your device is cradled, the text on the screen will change to "USB".
3. Run HimaUpgradeUt_noid.exe
4. Sit back and wait for the Congratulations screen to be displayed
on your PC. Your device will still be displaying 'Upgrading radio stack, please wait',
but as long as the PC says it is done, then its all OK.
5. Detach your device from the cradle.
6. Now you have to hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)"
hi
my htc s740 is dead...
How to a hard reset with the keyboard?
when I press power button the ppc it blocks at written "windows mobile 6.1", if I attend some minute, it exits to me outside a shielded white screen whit this word: "the device is unable to boot because either you have turned off the device incorrectly or tried to install an application from untrusted source.Press SEND to reset your device or press any other button to cancel. This operation will delete all your personal data and restore the device to its factory default settings.
if I press SEND key it does not succeed nothing
while off, press and hold vol down and center nav key, then power button.
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
great!!is ok! thanks.....
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
hey m8!
Thanks for the solution. i had hardtime doing it thou!!! if you encounter problems. press and hold vol down and center nav key BUT when it comes to power; just dot it. anyway maybe it's just me who did the stupid thing of holding power (well it works for the diamond so i thought...)
anyway thanks goes to ombre33
HTS Rose
R.0.24.30.24
G.12.23.30.06W
D.1.14.00.00
Peace
V
Does not work for me...
My Rose Keyb is not responding, I changed something in the registry and now I can no longer use both Keyb, I remove the battery, try the hard reset button stuff does not work, any ideas ?
sorry edit
ombre33 said:
while off, press and hold vol down and center nav key, then power button.
Click to expand...
Click to collapse
thnx! it works!
Strange.
Very strange! After doing the procedures, the rose ask to do the reboot and stop in logo of HTC. I had never happened me in any pda.
Now what i do?
You have to wait about 4-5 minutes then Rose will reboot again and will install the additional software.
1. From the Home screen, press the Start button.
2. Press More
3. Select Accessories
4. Select Clear Storage
5. You will be prompted to enter a code, enter 1234
I had the same probleem, my HTC S740 freezes after reboot with the HTC logo screen. I tried the follwoing and it worked:
- press and hold vol down and the navigation key
- pres and release directly the power botton
- a messege will apear, press the navigation key.
- the device will reset to factory settings
- a messege appear asking to press vol up to restart
- device will restart and begin reinstalling the software, reboot after then.
May i ask what are the applications (that came installed with the phone) that are gone with the hard resetting ?
Thanks
HTC s740 backup before reset
hi...i would like to know if there is anything one can do to back the information up before resetting the Phone as i have crucial Data i cant affort to loose. PLS HELP!?
There are few backup softwares which can backup almost everything on your phone, and you can easily recover it after hard reset. I personally use Sprite Backup, which is probably the best one.
Hello, the tablet CN98 Chinese Not starting... Is remaing to loading Android for 20 minutes, I didn't found recovery menu, any suggestion? thanks for help
get the orginal frimware from Crony company
and follow this steps:
1 . Acqure the firmware file from manufacturer
2. Download livesuit (http://www.mediafire.com/download.php?lawkcbqhbictar4).
Follow these Instructions to flash .img file through livesuite (I found them elsewhere):
3. Open LiveSuit.exe
Double-click to open the upgrade tool LiveSuit.exe
4.Select the firmware
Click the cube to the far left to select the firmware .img file.
5. Turn off your tablet
6. Press the key combination to start it in the upgrade mode
a. Press the "Vol -" key, then press the "Power" button, hold two buttons at the same time
b. Connect the USB cable to tablet and computer
c. After connecting the USB cable, press the power button 6 times quickly or hold the "Vol -" keys and the "Power" button for more than 6 seconds (you should get a pop up window if done correctly , if not repeat step 5 from beginning)
d. DON'T release the "Vol -" button till the LiveSuit window pops up
e. You can now release the "Vol -" button
(Note: If you install the driver at this time the pop-up dialog box, the path to point to installation directory UsbDriver LiveSuit folder, click Next to complete the driver installation prompts).
You should see LiveSuit window pops up; otherwise, you didn't do it correctly, you have to repeat step 4 and 5.
7. Select the format to force upgrade
Livesuit prompt "force format", click "Yes" (Y). All of the original apps installed will be removed.We highly recommend mandatory format! ! ! Otherwise the update is not complete and may brick! ! !
8. Upgrade begins
Pop-up "OK to force format" dialog box, select "Yes", the upgrade begins.
9. The upgrade is complete
Firmware download process last about three and a half minutes or so, please wait until the prompt "upgrade successful."
10. Automatic restart
After the upgrade is complete, your tablet will automatically restart, then you can unplug the USB cable.
Slow start-up for the first time, please be patient.
If the machine does not restart automatically, press and hold the Power button for 8-10 seconds or more to ensure the power switch off, then press the Power button 3 seconds or more to turn on your tablet.
11. Congratulations! You have flashed the firmware.
corny china tablet recovery mode
hi bros follow simple instruction to get recovery mode on corny tablet. press and hold reset button till screen off then release reset button . and press and hold volume up till u get recovery mode. tested by me
awesome man this trick works great..
i tried whole internet and nothing else works ..
thanks a ton @abuafee
how can i find the firmware for my tablet? Crony CN997G
I have a TITAN X310e phone
Nothing else to do,
Press the volume down key into a black and white interface, forgot to modify what
Now only shows a white screen of the phone is switched on, connected on the computer prompts a KITL device
Can not install the driver
The two modes can enter
1, can the camera button and volume down key into a USB Host mode
2. can the Press the volume up and volume down keys*Enter the SPL mode
Now do not know how to start
coolomg said:
I have a TITAN X310e phone
Nothing else to do,
Press the volume down key into a black and white interface, forgot to modify what
Now only shows a white screen of the phone is switched on, connected on the computer prompts a KITL device
Can not install the driver
The two modes can enter
1, can the camera button and volume down key into a USB Host mode
2. can the Press the volume up and volume down keys*Enter the SPL mode
Now do not know how to start
Click to expand...
Click to collapse
If you're able to enter bootloader (vol up and down + vol) than simply flash anything (stock or custom if HSPL is already installed). It's absolutely no problems for the moment with your phone.
AndrewSh said:
If you're able to enter bootloader (vol up and down + vol) than simply flash anything (stock or custom if HSPL is already installed). It's absolutely no problems for the moment with your phone.
Click to expand...
Click to collapse
If HSPL isn't installed and he's staring at the black/white screen with the image of a device and a computer is that not the mode he needs to be in for Cab Sender? I appreciate much of the information you post; thank you!
I tried to reset the windows and from that moment I have only the logo of your company and after that a black screen.
I did the following :
1. At the very beginning i hold down the Power key in order to switch on the device.
2. Afterwards i hold down Shift key (on screen keyboard).
3. While the Shift key is still pressed, i tap Restart option and confirm the operation.
4. In the next step i choose Troubleshoot.
5. Then i tap Reset my PC and i confirm operation by pressing Next.
6. I choose Fully clean the drive.
After some time, the message I got was: "There was an error and hit cancel".
I tried to cancel it but it was nothing happen. So i shut it down.
After that i try to get in bios:
I push the power button and hit the "del" on my keyboard but nothing happens.
( I connected the keyboard to the device on USB )
my device simply makes restarting all the time.
Can you tell me what to do?
best regards from GREECE
ps. I have only a Linux operation system on my PC.