Related
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
8-11-2004 20:57 GMT: New version V2 uploaded.
I added a small archive containing the changed ExtROM files to solve the earlier reported errors (not updating ExtROM version and not making IIWPO un-installable).
Comment on IIWPO and making it un-installable: After having customized & installed IIWPO, you will have to do one of the following to make it un-installable if youre using the 1.72.902 ExtROM:
a. Another hard-reset
b. Running Version_172_902.cab from the ExtROM
NOTE: This thread is being replaced by
http://forum.xda-developers.com/viewtopic.php?p=68652#68652
Thank You!!!!!!!!!!!!
I am d/l'ing right now and will be installing shortly...
One request... You might want to include the cab for setting up IIWPO in case someone is installing it into the phone.
edsub Thanks.
Question tho. Can I use this for T-Mobile USA and does it fix the MMS problem ?
asking because the version says NL, isnt that the Netherlands country code ?
Thanks again
Well from first look everything seemed ok.
THese are a few of the things I have noticed since loading.
1. The ext rom version # doesn't show up in the info
2. If you use the IIWPO then it still shows in the remove list
3. The new apps from the 187 version will not install no matter what you do. (I have tried adding the ver # in the Reg, both 902, and 187 (not at same time)) Niether worked.
These are the few things that I have found since loading. If I find any more I will loet you know. Other than these I think you havea winner here!
I was wondering about the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 packages, and why you didn't include or update to them? Was there some incompatibality issue?
Thanks and great job!
Re: Home-cooked 1.72.902 upgrade package (1.72.00/1.17.00) T
edsub said:
I just put together the following pieces
OS 1.72.00WWE
Radio 1.17.00
ExtROM 1.72.902
"CountryCode" = TMOBILE
All configured for T-Mobile NL
Plz. Post any comments
(Plz. note this thread replaces http://forum.xda-developers.com/viewtopic.php?t=11781 )
Click to expand...
Click to collapse
Is SRS included?
SRS is not included due to the fact that I don't see any use for it personally. Since it is an ExtROM installer, you could add it yourself.
The NL is only there because some sdetting are more or less specific to the Netherlands. I had feedback on my earlier 1.72.901 package that it worked for other countries (incl USA) as well. Be prepared that the date format will be dutch by default (easy to change via settings though).
Also MMS is suposed to be working (but I have not tried it due to lack of interest in MMS)
The ExtRom# is not showing because some bug in the Version_172_902.cab. Working on that now.
IIWPO not showing in the remove programs list is a bit more difficult than it seems if you install for the first time. Normally you would boot up the device with new rom. IIWPO is NOT installed at this point. Once you have customised & installed IIWPO, you will have to do ANOTHER hard-reset (ie run the ExtRom contents again) to disable the uninstall. You could force this by hand first time to re-run Version_172_902.cab after installing the customised IIWPO. BUT as this cab is not OK, it wont work anyway. Working on that now.
I did not find the time to look into the new O2 apps. If someone finds a solutiuon here, I am more than happy to includew it in a new version.
For the streaming MMS, the new bluetooth stack, and some of the other new versions of software that came in the 181,187 the basic reason is lack of time. I dont know what 'extra' new there is on bluetooth in the O2 builds? OS Rom 1.72 allready has an updated BT stack that fixes most open issues. I have no experience (& interest) in MMS / streaming MMS . . .
I suppose the issue with TomTom locking up without GPS enabled is not solved with this rom ?
I know: wishful thinking..........
@Pleun: Nope. I WISH I would have solved that one!!! FYI: I tested he new TomTom GPS 3.07. It doesnt solve any locking issue and next to that makes my Headset react very slow. Also the 'Bluetooth GPS' option that is supposed to solve the locking has gone, at least with my installation. Not advisable. I reverted back to TomTom GPS 3.03.
@all: I solved the issue of not setting the Ext Rom version and making IIWPO non-uninstallable. New version V2 will be up in 10mins (incl. incremental fix for all that downloaded the version from yesterday).
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
edsub said:
New V2 is up now. See first post in thread.
Plz keep posting comments to make this upgade better
Click to expand...
Click to collapse
I feel like my MDA2 is a little bit slower to respond not sure why! I added PocketMVP, Belkin Bluetooth GPS, Resco Explorer 2003 V5.0 and .NET Compact Framework 1.0 SP2 for Pocket PC 2003.
I am having problem with Belkin BT GPS; I got it to bond, detect the COM port (COM5) and baud rate(4800) to use but my MDA2 hangs up and had to soft reset. Any idea why?
I will try to install one by one and see what's causing it and report here.
edsub thanx for me it works great its a great improvement!
machine seems faster and no more lock-ups.
Keep up the good work (ill be following you)
p.s only one thing my battery seems to give me no more than 4 hours of on-time
4 hours is very different from my (and others!) experience. The 1.72 rom should even improve battery life.
My battery lasts for about 1,5 days (not measured but recalled from my memory) with approx 1-1.5 hours on the phone and bluetooth permanently switched on . . .
were can I download this rom from?
from the first msg in this thread : RUU172902WWE_eDsuBsofT V2.exe
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Anonymous said:
Hi me again, dont want to sound stupid but I've tried both Opera and Explorer and cannot find any executable file in the first post. Normally it appear in some sort of info box but none to be seen on this thread and the link to the previous one!?!?! Is this something to do with XP SP2?
Click to expand...
Click to collapse
You cannot download it as a guest! If you are a member of this forum you have to log-in before you can see the file you want to download. That's what I encountered before so just try logging in first.
Good luck!
THank you very much superperry. Should have registered before but was always too lazy.
I have put together rom upgrade 1.72.903
This thread can be closed. See http://forum.xda-developers.com/viewtopic.php?p=68652#68652 for the new one
Edit: The new upgrade files are now available (see refered post)
An error need help please
I downloaded the files then followed the instruction below but now I get error
the flashing process
first the devicedata is obtained from the device, with HimaGetDeviceData.exe, this gets the operatorname, and language/country code from the extended rom, sector 2 of the BDK.
Then a tool 'HimaClearJumpCode' is executed, which erases the jump at the start of the kernel. causing the bootloader to start at next reboot.
the upgrade tool then connects to the bootloader of the xda, via serial over usb. ( port \\.\WCEUSBSH001 )
warning do not just run the 'HimaClearJumpCode' program, it will erase part of your OS rom, after which you will have to repair your device by running an entire upgrade again.
Hi,
I bought pocketzenphone for my XDA IIs and it worked fine. I've tried to install it on my original XDA I but it doesn't seem compatible; when i run the cab files, they seem to install, but upon reboot I don't see any icons for PZP.
Does the latest version of PZP work with the original XDA I (with original ROM)?
If not is there an older version?
What about other software that is as good as PZP that might work?
Ta.
Have you tried searching for the icons/exe files?
I can find the executables, but double clicking on them just brings an error message: "can't find such-and-such".
Any ideas?
Is your XDA1 under WM2003 or PPC2002 ?
Because PZP only works under WM2003(SE)
It's PPC2002. I guess it's not compatible.
Hi.
I had windows mobile 2005, but the first version that it was upload here. Now I have changed to the latest that I have found in buzzdev but I´ve got some remaining software that don´t works... for example, I´ve got some icons of spb pocket plus, but if I try to execute it, I can´t because problems of dependences erased or something like that...
The question is: How could I cleam completly my memory to have my new windows 2005 totally new in my XDA II?
Thanks for all.
salu2
scsssd said:
Hi.
I had windows mobile 2005, but the first version that it was upload here. Now I have changed to the latest that I have found in buzzdev but I´ve got some remaining software that don´t works... for example, I´ve got some icons of spb pocket plus, but if I try to execute it, I can´t because problems of dependences erased or something like that...
The question is: How could I cleam completly my memory to have my new windows 2005 totally new in my XDA II?
Thanks for all.
salu2
Click to expand...
Click to collapse
In doubt read this thread (probably again ?) http://www.buzzdev.net/index.php?option=com_simpleboard&Itemid=59&func=view&id=6594&catid=26
Try this part (it always helped for me .... and I installed three different ROM in the last seven days ... really annoying by the way :roll: )
10. Now you have to hard reset your device.
Press simultaneously: Reset Button + CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(to select items use Record Button, to change values use Camera Button)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
(to set the options the way mentioned is importatnt)
Hope you have more luck with your ROM
best regards
Shrek
Hi.
Yap, I think that I´m gettin´ stupid with my tests at university, and because of this, then I come back to play with my XDA II and I can´t think clearly...
It worked perfect. Now I´ve got the brand new w2k5 1.65b.96 flowin´ like water...
thanks 4 all
salu2
In P3600 software update space, in the HTC Europe website, yuo can download a configurator, easy to use, to set up ANY mobile operator in all european counties supported. Internet, Wap, MMS, ...
It works not only for P3600 but also with my HTC S620, TyTN WM6 black 2.0 edition!
http://www.europe.htc.com/support/software/htcp3600.html
Thanks man, I'll give this a go next time I flash
Thanks for the link man ...hope they will include my country in next version...
Regards,
Primoz
Could anyone who tries it for Orange UK confirm if it works.
I jut ran it quickly but only had time for a quick look. Initially seemed OK for internet but PIE would not connect (said connection error) - ran out of time and so reran the cab I use for settings (rabdos original cab I think) and then the connection worked.
Might look at it again later.
GTG.
C.
sergiopi said:
In P3600 software update space, in the HTC Europe website, yuo can download a configurator, easy to use, to set up ANY mobile operator in all european counties supported. Internet, Wap, MMS, ...
It works not only for P3600 but also with my HTC S620, TyTN WM6 black 2.0 edition!
http://www.europe.htc.com/support/software/htcp3600.html
Click to expand...
Click to collapse
Thanks man, very usefull link.
This is a "must have" for all of me that test every new ROM
Edit: Tried with Orange Spain, but dosn't work as expected. Adds Orange GPRS, WAP and MMS entries in Conecctions, but left blank access point name and Username and pass, so the connectcion fails.
Anyone have the same issue?
Thanks.
Edit2: This is the CAB modified with correct settings for Orange Spain.
Orange UK Worked Here
I Recieved An MMS Message And Synced My Hermes With An Exchange Server Over GPRS/3G. So Don't Know What Went On With Your Connection.
Cheers
Great H3GSweden worked also, thanks.
Great tool but....
when i install the configuration for germany and i also want this for austria, the german will be overwritten when i install the austrian configuration.
when i travel beetween three countrys this is not good because i take not every time my notebook with me.
Now is time for developers to convert in a PPC application all configuration files!
You have all the info's
cool thanks a lot dude
@heimerdinger.
Don't Quote Me On This One But, If You Dont Connect Your Hermes To Your PC And Then Run This Installer For The Language You Want. The Cab File That You Tried To Install Gets Saved To A Temp Folder To Be Installed The Next Time You Connect Your Device.
So Install The German And Austrian Languages Without Connecting Your Hermes, Then Search For The Cab Files. Copy Them Onto Your Device Then You Just Run Them When You Swap Between Countries.
Someone Please Correct Me If Im Wrong
Cheers
The Cab Files From The UK Installer Have Been Extracted You Can Download Them From This Thread
http://forum.xda-developers.com/showthread.php?t=301279
Cheers
cabs file not on hdd
thats not right. the cab-files are not on the harddisk when i install the exe-files without connecting the hermes
heimerdinger said:
thats not right. the cab-files are not on the harddisk when i install the exe-files without connecting the hermes
Click to expand...
Click to collapse
You execute the installation sofware without phone connected, and get a message that says "next time you connect your phone, the soft installs". Before click in OK, search in Temp folder for the CAB. You will find it.
If you click OK, the installation software deletes the CAB.
Regards.
Hi guys
I got this problem, when i try to launch android ( thelittle green man) or go into the files explorer and hitCLRCAD then HARET - the screen turns black like this video :
I have search all over the website, also google'd it, nobody knows how to
HSPL3 - using the file 2.08. HSPL
and energy rom 22. aug. 2010 ( don't know where to find info)
I have tried to reformat the SD card, changed it with another, flash the HD2 like 4 times, installing the rom for WN and tried again with Energy.LEO - all stuff got from this site...
need desperate help!
anyone.. and sorry if this topic is some elsewhere - couldn't find some info...
sanninja said:
Hi guys
I got this problem, when i try to launch android ( thelittle green man) or go into the files explorer and hitCLRCAD then HARET - the screen turns black like this video :
I have search all over the website, also google'd it, nobody knows how to
HSPL3 - using the file 2.08. HSPL
and energy rom 22. aug. 2010 ( don't know where to find info)
I have tried to reformat the SD card, changed it with another, flash the HD2 like 4 times, installing the rom for WN and tried again with Energy.LEO - all stuff got from this site...
need desperate help!
anyone.. and sorry if this topic is some elsewhere - couldn't find some info...
Click to expand...
Click to collapse
Hi there.
This is a question for the Android forums.
Try asking or searching in these ones.
http://forum.xda-developers.com/forumdisplay.php?f=735
http://forum.xda-developers.com/forumdisplay.php?f=743
Regards.