Which setting is the default for North AMerica?
Related
Trying to set up my new X10 mini pro for service on ATT USA. Running into some setup snags.
Have already rooted!
Model is U20i
Have network mode set to GSM / WCDMA preferred
Network operators setting has ATT and ATT DR available. WILL NOT let me select ATT only DR - if I try ATT it says "your sim card does not allow a connection to this network"
How do I get off of ATT DR and onto ATT?
Under APN I put in:
name - att
apn - wap.cingular
proxy - wireless.cingualar.com
port - 80
username - not set
password - not set
server - not set
mmsc - http://mmsc.cingular.com
mms proxy - wireless.cingular.com
mms port - 80
mcc - 310
mnc - 410
apn type - not set
Should I be worrying about data roaming? Im fairly certain thats what the DR in att dr stands for. I understand if 3G isnt possible. But data roaming.yikes.
Have you checked what operator the sim gives you in a 2G only phone? You sadly wont be able to get 3G, you'd have to track down a u20a variant for that.
I could not find an answer using search, so my apologies if this was previously answered.
I just purchased an unlocked SGSII (International version) and wondering if anyone had success getting it working with AT&T? I tried using a SIM from my Galaxy S/Captivate phone and changed the bands to 850/1900 in ServiceMode to no avail.
Can someone post working settings for phone and data use? Also, do I need to call AT&T to "activate" my new phone?
You must have done some pretty ****ty searches. I typed in Galaxy S II AT&T APN and this is what I got:
http://forum.xda-developers.com/showthread.php?t=1109983
http://forum.xda-developers.com/showthread.php?t=1175006
I added the APN like the posts you referenced, but the S2 still says GPRS and mobile network state 'Connecting'. My captivate just uses the SIM APN settings and gets UMTS/HSDPA.
Mobile network settings:
Use packet data - Enabled
Network mode - GSM/WCDMA (Auto)
Access Points -
Name: AT&T
APN: phone
MMSC: mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet+mms
Sorry I should have been more descriptive in my original post. Baseband version is XXKH3 and I tried Cognition ROM to see if a different ROM/modem would help. Someone lead me to the Service Mode menu (*#*#197328640#*#*) to try changing Debug>Phone Control>Network Control>Band Selection from Automatic to just the AT&T frequencies, but that does not change the status.
Please excuse the noobness. Any ideas? Thanks!
Just an update.. it seems that the "International" version I'm using is the Korean/Olleh branded model (SHW-M250K). A couple of threads mentioned that it only works single (900) or dual band (900/2100) UMTS, which would explain why it is only connecting via GPRS.
http://forum.xda-developers.com/showthread.php?t=1188910
http://forum.xda-developers.com/showpost.php?p=13490996&postcount=3
http://forum.xda-developers.com/showpost.php?p=13234818&postcount=4
Is there anyway I can enable or unlock those frequencies? Otherwise, I'll have to return the phone since it does not work on AT&T 3G.
Heey guys,
There used to be part of the website which allowed you to send the settings to your phone, however now EE have taken over it no longer works!
Anyone know the correct APN settings? I can currently not use the internet...
Addicteddddd said:
Heey guys,
There used to be part of the website which allowed you to send the settings to your phone, however now EE have taken over it no longer works!
Anyone know the correct APN settings? I can currently not use the internet...
Click to expand...
Click to collapse
as per Link:
APN Settings
Dial Number : *99#
APN : everywhere
Username : (leave blank)
Password : (leave blank)
Frequency Bands
1800 MHz GSM, GPRS, EDGE
2100 MHz UMTS, HSDPA, HSPA+, DC-HSPA+
1800 MHz LTE
800 / 2600mhz LTE (Planned)
chrismast said:
as per Link:
APN Settings
Dial Number : *99#
APN : everywhere
Username : (leave blank)
Password : (leave blank)
Frequency Bands
1800 MHz GSM, GPRS, EDGE
2100 MHz UMTS, HSDPA, HSPA+, DC-HSPA+
1800 MHz LTE
800 / 2600mhz LTE (Planned)
Click to expand...
Click to collapse
THANK YOU.
Finally I've got internet back on my phone
I set the "server" to "*99#" and it worked!
I'm on t mobile and had them send full settings this morning..here
Name: Internet
APN: general.t-mobile.uk
Username: user
Password: pass
MMSC: http://mmsc.t-mobile.co.uk:8002/
MMS proxy: 149.254.201.135
MMS port: 8080
MCC: 234
MNC: 30
Authentification: PAP
APN type: default
I just got my M8Pro 3G tablet from PiPo with default APN setup for using AT&T.
Name: ATT
APN: broadband
Proxy: Not Set
Port: Not Set
Username: [email protected]
Password: cingular1
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not Set
APN Type: default,supl,mms
APN protocol - IPv4
APN enable/disable - APN enabled
Bearer – Unspecified
My problem is that it will only connect to the EDGE 2G network, which is way slow. The modem specs for this 3G tablet are as follows:
1. Standard SIM Card Slot
2. HSPA/WCDMA: 2100/900MHz
3. GSM/GPRS/EDGE Quad band: 850/900/1800/1900
4. Download maximum: 7.2Mbit/s
5. Upload maximum: 5.76Mbit/s
In working with AT&T Tech Support we find that the provisioning system can not ID the IMEI number. Therefore, no APN settings from AT&T.
I am thinking that if provisioning could be set up for some other similar tablet we might get this working properly. I have tried several APN setups but nothing will let me get beyond EDGE 2G.
Any help would be greatly appreciated.
Im told that the correct ATT 5G MNC APN settings is 410. Mine reads 280 cant change it. But the app Network Tower Lite reads that I have both. Any thoughts?