hi guys,
now this one really bugs,
i just upgraded to wm5, not only its an amazing experience, its like being in the future with a xda ii in my hand,
but the problem is while using it as an external usb modem
after clicking start in the wireless modem option,, it shows error :-
" COM OPEN ERROR (8).
i had been using the device as a modem with wm2003se it worked fine.
i am not a techie. but would be glad if some one can help me out on htis one plz
thanks
Hi,
Have u ever get a resolution to ur wireless modem issue?
Please shoot me an email ([email protected]) if u want to share experiances; i'm also trying to make this work with WM5
Delete all com ports under bluetooth set-up.
I have deleted all the port on bluetooth set-up but i still cant make my xda ii as a modem.. :'( there still error while opening com port (8) as USB modem... :'( help me please.. :'(
"after clicking start in the wireless modem option,, it shows error :-
" COM OPEN ERROR (8)."
if you get an error on the pda i would look if "auto recieve beams" was turned off
if it's on the pc i would remove all old hidden comports defined in devices
I 've unchek the incoming beam, I also has deleted all the old comport on ny PC, even i 've try it on other PC, but still the com port errors (8) appear. i've also hard reset my XDA ii but still have the same problem. finally I chek the device modem with some kind of tweeking app on my XDA ii, and there's only 4 modem I have on XDA ii,
1. Bluetooh Modem
2. Bluetooh FAX Modem
3. Serial Com (1) Modem
4. and 1 other thing I forgotten
but there is no USB modem built in my Hyma upgrade wm5...
:'( help me please... any one.... :'( i 'll be so greatfull for it... :'(
Notes : i've use Bluetooh as a wireless modem and its works fine unless the speed is so... so... so... slooooooooowwwwww......
help me please.......... :'(
Related
Hi everybody
I have a big problem:
when i lost the gsm signal the phone is power off and never recive incoming calls ... until i'll power on again.
Is there some settings in order to search the gsm signal always...?
...cause i can't control the xda every 5 minutes if have signal or not...
I have 4.21 radio and 4.00.11 rom
Thanks all
Denis
have you tried a hard reset? or even re-writtin the bios?
that worked for me
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
Sorry ... when can i get the radio 6.24.00 ???
can work for Italy ?
What do you mean with "re-writtin the bios" ... ? the SD card boot ?
Thanks
I have bootloader version: 1.03
When I turn on my xda i see only screen:
serial
v1.03
i think that my xda is dead how can i repair this?
I try flash my device using sd but i dont have this option in my bootloader..
You should be able to upgrade your device using the HimaUpgradeUt program. See my post here for information on what to look out for, etc.
I think thats is not good way because i cant connect my device to pc using activesync.. i have only bootloader mode on my xda..
That doesn't matter, the upgrade doesn't need Activesync. It looks after its own connections.
I just connect my xda in bootloader mode to usb. The activesync not saw may device but i run HimaUpgradeUt.exe and my device start upgrade! I have Germany ROM now i upgrade this To same English ROM.. Before i do this that way program show mi error 102.. now its look like everthing be good.. we will see for 5 minutes.
sorry for my english
i am from poland
OK. Let me know what happens.
The program just finish operation.. but on my device screen is still:
Upgrading
radio stack
Please Wait...
I dont know what i should do..?
That's OK. As long as the PC said 'Congratulations' its all done. Take your device out the cradle, hard reset it and it will run the standard setup.
Everythink is great! My Pocket Pc work! Thank You for Your advise.
Maybe somebody know where I can find some Rom to Xda.. Without O2 Rom because i have it. Maybe there is some rom kitchen like for xda 1
Excellent news For information about customising the Extended ROM, search for Extended ROM on the forums.
to dcs: I'm now upgading my o22'Rom from v2.06 to 2.20 (translated frm chinese --> english). after I completed fixing country ID, I have a new erro (erro102: CE image file checksum erro. the Rom image file to be used for the update is corrupt). I try to download again and update but I fail, the erro is 102. please show me hoe to pass this erro.
thank
If u see the log after HimaUpdIt ul see some like this;
16:27:04 Connection with USB
16:27:37 Begin stage 1
16:28:11 End stage 1
16:28:12 Begin stage 2
16:28:12 Write block1
so, he searches for his own connection! Dont worry just download the rom, himaupdit file and upgrade ur xda Tell us how it works
Hello fellows ..
First time on this forum .. i usually stick to photography forums .. however fate brings me here ..
Noticed an announcement for update ROM for the XDA II, and tried to install it .. i have an XDA IIi , on O2 .. sim unlocked ... .. PDA was on cradle .. it asked for a confirmation .. i did a system reset as advised ... the Upgrade patch didnt give no error messages .. and seemed to be working OK, till it said that patch cant be applied ..for i dont know what reason ..
It seems my phone is left without a ROM now .. ( when i turn it on, it shows what U guys probably call a Bootloader , a screen saying version 1.02 or something , and if connected to USB, says USB ) .. but doesnt go anywhere from there ..
I tried installing XDA developers special ROm 1.2, but it doesnt seem to install .. Tried another ROM upgrade, but that requires ActiveSync, which doesnt obviously detect my phone any more
Can please tell me in steps .. 1, 2, 3, .. what do i do . . i know how to perform an appendicectomy but know very little about ROMS of phones ..
please kindly tell me .. what files to download, how to connect to ActiveSync if needed, i have a 128 MB card if needed, have teh USB cradle .. and have an O2 monthly SIM.
help here will be appreciated and remembered for a long time
Kind regards
Execute HimaGetDeviceData.exe on your device.
Execute HimaGetDeviceData.exe on your device. There will be no visible indication that it has run, but it will produce a file called DeviceData.txt in the Windows folder of the device.
I UNDERSTAND THAT I HAVE TO DO THIS ABOVE MENTIONED STEP
but how do i do it when my XDA wont start at all ???
XDA developers special ROm 1.2
Click to expand...
Click to collapse
if you have a himalaya device this rom is not for you
it's only for walaby devices
this is where you get info
http://wiki.xda-developers.com/index.php?pagename=Himalaya
http://wiki.xda-developers.com/index.php?pagename=HimalayaRomkitchen
I tried to do a ROM Upgrade but something went wrong and now the screen on my XDA II just shows the words Serial and v1.06. When I did a hard reset the screen still shows the same thing. When I connect the device using the cradle the word Serial changed to USB, but it didn't seem to connect to the PC. The Activesync was not activated also. When I tried to run the ROM Upgrade again, it shows ERROR 100: MODEL ID ERROR. I tried to run HimaUpgradeUT_noID.exe, it shows Error 103: ROM IMAGE FILE NOT FOUND. Can anyone please help me get my device working again? Thank you in advance.
Wrong ID
a few days ago i had the same problem with my HTC Blue Angel (also known as
qtek 9090)
temporaly youre PDA shows the bootloaderscreen. On top it shows youre kind of connection, on the bottom you can find the revision of this piece of software.
try this tool to reanimate youre pda.
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar runterladen.
extract this file into the dir, where you have copied the original ROM-Image from youre developer, put youre PDA into cradle and check, if the status of this connection is changed in USB. Everything o.k? Right now: doubleklick on MAUpgradeUT_NoID and drink a coffee. it takes about 10 Minutes and after this youre pda runs as well. dont forget to copy youre original ROM-Image with the original Installer after finishing this procedure to avoid any errors.
Well, i hope this tutor will help you. i´m interested for.
Wrong ID
a few days ago i had the same problem with my HTC Blue Angel (also known as
qtek 9090)
temporaly youre PDA shows the bootloaderscreen. On top it shows youre kind of connection, on the bottom you can find the revision of this piece of software.
try this tool to reanimate youre pda.
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar runterladen.
extract this file into the dir, where you have copied the original ROM-Image from youre developer, put youre PDA into cradle and check, if the status of this connection is changed in USB. Everything o.k? Right now: doubleklick on MAUpgradeUT_NoID and drink a coffee. it takes about 10 Minutes and after this youre pda runs as well. dont forget to copy youre original ROM-Image with the original Installer after finishing this procedure to avoid any errors.
Well, i hope this tutor will help you. i´m interested for.
[email protected] youre own risk.
Dead XDA II
Hi Guys, I'm new to all this because my XDA has never failed me, until now. I too tried to upgrade the ROM, realising too late that the upgrade from a UK site was not meast for the Asian zone.
Anyway, I tried downloading the following link:
http://rapidshare.com/files/36498840...adeUt_noID.rar runterladen.
When I tried to lanch the file it tells me that RUU.dll is missing.
Is there a link that works or is there a fix for this? As I said, I'm new to this therefore need step by step instruction.
Hope someone can assist, I'm lost without my XDA II.
Thank you
Ben
cannot download from the link
hello
I have a black screen on my qtek 2020i (XDA2i) after upgrading the ROM, and I saw that the solution you are providing works good, but I cannot download the fix using the link
please advice
http://rapidshare.com/files/36498840/MaUpgradeUt_noID.rar
XDAII Dead
hi,
ive put my MDA into the cradle and get the Serial screen to change to a USB screen. ive downloaded the file and put it with the rom upgrade that i got frm T-Mobile. when i run the program on my computer i keep gettin "Connection Error" screen. what should i do.
pleas advise.
m1000 dead sad
i regreat to say i did try for update my spv m1000 today but my got died now when i tried i did conntect my ppc with ppc via bluetooth actvesync when i run HimaUpgradeUt.exe then a window open and shows mgs wait 30 minunt but after even 1 minunt got error also my phone got stop like dead and screen shows on top serial and on bottom it shows v1.3 i realy .sad. becouse now i cant reeboot also even ui have not data cable any body help me plz what i do now ?
thanks for my help
really want to say thanks who helpd me i upgraded now my spv m1000 my self without any problem becouse i brought data cable of i mate and its workin fine with my spv m1000 yahooooooooo xda roken
usman_hussain1987 said:
hi,
ive put my MDA into the cradle and get the Serial screen to change to a USB screen. ive downloaded the file and put it with the rom upgrade that i got frm T-Mobile. when i run the program on my computer i keep gettin "Connection Error" screen. what should i do.
pleas advise.
Click to expand...
Click to collapse
Hi Usman,
What OS of windows PC do you use? it can't work with windows vista. Try to downloads new version of active sync then try it again. The upgrade is specify, can't work in any kind of devices
Ok so I am trying to open the GPS on my new phone. I am at the QPST part but I can't add COM4 or COM5 beacuse it says its busy or something? Who can I get it to work?
It also does not show my phone in the service programming section.
Did your phone come with the new update already? Just check and make sure.... Also what rom, spl etc... have you loaded?
My phone came with the original but I had trouble with the Bootloader so I had to flash it with the new ROM but I didn't go through the configuration at the begining of loading the rom. I immediately flashed it to DCD 3.2.6. so Now I have
Radio 3.42.50
ROM DCD 3.2.6
SPL 2.47
ANything else?
This is the error I get from QPST after I go to "Add New Port" ...
"There was an error enabling COM4. The Port may not be working properly or may be busy (-2147467259)"
THe port is not in the port list so I had to put it in manually. It was in QPST before but I removed it and now I can't add it again? What do I do?
JukEboXAuDiO said:
My phone came with the original but I had trouble with the Bootloader so I had to flash it with the new ROM but I didn't go through the configuration at the begining of loading the rom. I immediately flashed it to DCD 3.2.6. so Now I have
Radio 3.42.50
ROM DCD 3.2.6
SPL 2.47
ANything else?
This is the error I get from QPST after I go to "Add New Port" ...
"There was an error enabling COM4. The Port may not be working properly or may be busy (-2147467259)"
THe port is not in the port list so I had to put it in manually. It was in QPST before but I removed it and now I can't add it again? What do I do?
Click to expand...
Click to collapse
Your phone is not connected or you are not running DMR (or whatever). I had this problem when using nueUSB. I had to put it on "dont ask each time I connect" mode and selected to autostart up as ActiveSync. Well thats what was holding me back.
Check deviuce manager in Windows and tell me if the HTC USB Modem shows before you launch QPST but after you put the phone in the Diag Mode.
Oh yeah, you did install the drivers, correct?
Oh and can you get an Active Sync connection before entering the Diag Mode?
Also, I found it handy to reboot after I got those messages, both the phone and the PC. Maybe some sort of hook on the QPST app that wont let it see the new connection until a reboot I was thinking? Possibly locked up the port when trying to connect original. Just theory but thats what worked for me.
mkenny2 said:
Did your phone come with the new update already? Just check and make sure.... Also what rom, spl etc... have you loaded?
Click to expand...
Click to collapse
The new update has nothing to do with QPST. I entered QPST right after flashing to the new Official GPS Rom so i could examine the GPS settings and had no issue at all.
I had the same problem. So, I uninstalled QPST and reinstalled it and it fixed the problem and it worked.. Good luck!
JukEboXAuDiO said:
Ok so I am trying to open the GPS on my new phone. I am at the QPST part but I can't add COM4 or COM5 beacuse it says its busy or something? Who can I get it to work?
Click to expand...
Click to collapse
JukEboXAuDiO said:
Ok so I am trying to open the GPS on my new phone. I am at the QPST part but I can't add COM4 or COM5 beacuse it says its busy or something? Who can I get it to work?
Click to expand...
Click to collapse
You must put your phone in DIAG mode... ##3424... and connect the USB cable... It will "Create" new ports. It won't be the same one that Activesync uses. Open Windows device manager and go to ports. If you unplug and re-plug the cable to the phone and computer... you'll see it disappear and reappear
nitro66215 said:
You must put your phone in DIAG mode... ##3424... and connect the USB cable... It will "Create" new ports. It won't be the same one that Activesync uses. Open Windows device manager and go to ports. If you unplug and re-plug the cable to the phone and computer... you'll see it disappear and reappear
Click to expand...
Click to collapse
Ok so i did that last night and it worked with ports COM6 and COM7. Now I have a problem. i did gc14's GPS fix, did the registry fix, used the certs to disable security and enable it, installed quick GPS and I still can not get a fix with my GARMIN XT program. Any ideas?
JukEboXAuDiO said:
Ok so i did that last night and it worked with ports COM6 and COM7. Now I have a problem. i did gc14's GPS fix, did the registry fix, used the certs to disable security and enable it, installed quick GPS and I still can not get a fix with my GARMIN XT program. Any ideas?
Click to expand...
Click to collapse
did you try GPS Viewer? HERE
I will try it. thanks. Lets hope it works.
Also, make sure Location is set to On and not 911 Only in the phone settings.
Where can I download the agps fix files? The thread that comes up everywhere (http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFixhas bad links to cinconet.org.
i installed 6.1 rom with 3.37 radio from verizon . then i did unlock with 2.31 coke then flashed nsffans 6.5 rom . now i downloaded wmodem installer and qspt . i put the phone into diag mode and connected to activesync . diag screen goes to today screen and activesync disconnects . then nothing ! when i open add new ports in qspt it shows the two usb comms but when i click them it says busy ! what do i need to do to get the dmr to not switch to today screen
You don't have a HTC titan 6800. You should be posting under your vogue phone category. I have told you before to post the in the other section I don't understand why you don't listen.