Hi,Have looked through all the posts,but am still strugling to set up orange mms settings.Can connect to orange mms,but unable st send picture message.Failed.Connection .Gateway.Address 192.168.071.035.port 9201.Ticked.Connectionless gateway.
Under message server I've put http://mms.orange.co.uk.Sender address phone number.Put +1 then my number.
Any tips appreciated.I think it's close.Thanks :?:
i think you can install mms composer on xda1 aswell as on xda2 i think it's a better mms program then ez wap
I very rarely use MMS on my Himalaya, but I still like the feature to be there in case someone else sends me one. I recently received such a message from a friend, and was unable to download it. I am using O2 UK.
Now in the past, I have managed to send and receive MMS on the device, and have not since changed any settings relating to the service. However, when I now open the new MMS and click on the 'Download' button, the device connects to the WAP network, the 'MMS Receiving' icon appears at the top of the screen, and then promptly disappears. The message does not download, and simply allows me to press the 'Download' button again.
Have O2 changed the MMS service in some way during the past few months that would prevent me from receiving messages? I can still send them without problems, but receiving is another matter entirely.
I have tried reinstalling ArcSoft MMS, and reconfiguring the MMS server settings, but nothing I do seems to help.
Does anyone have any ideas, as I'm going crazy trying to figure this out...
Just for reference, here are my settings.
Connections:
My Work Network
WAP network GPRS
Cellular Line (GPRS)
wap.o2.co.uk
User: o2wap
Password: password
MMS Server:
Gateway: 193.113.200.195
Port number: 9201
Server address: http://mmsc.mms.o2.co.uk:8002
Sending size limitation: MAX
MMS settings:
Connect via: My Work Network
Checked: Retrieve messages immediately
Checked: OK to download when roaming
Checked: Save sent messages
Attempts before giving up: 3
Photo resolution: Original
I guess I'm the only one having a problem... :?
Can anybody here give me the mms settings for smart network?
tnx in advance
As far as I know the Wallaby doesn't support MMS, but I could be wrong or you could find some third party software to support it, but out of the box it doesn't.
Regards,
Neil.
evan_gerard said:
Can anybody here give me the mms settings for smart network?
tnx in advance
Click to expand...
Click to collapse
Hi evan_gerard,
Let me know if you already got your mms working on your wallaby. I have mine working using EZWAP and manually configuring Smart's IP address. I'll post the settings here if you need them. Happy new year!
morph751 said:
evan_gerard said:
Can anybody here give me the mms settings for smart network?
tnx in advance
Click to expand...
Click to collapse
Hi evan_gerard,
Let me know if you already got your mms working on your wallaby. I have mine working using EZWAP and manually configuring Smart's IP address. I'll post the settings here if you need them. Happy new year!
Click to expand...
Click to collapse
YES MORPH751 pls do help me with the settings, and where can I get ezwap, tnx in a million
Get EZWAP here:
http://www.ccsleeds.co.uk/stuff/ezwap25xda.zip
Thanks to Pete K for the link.
Download and install EZWAP to your wallaby. You need to configure the settings first before MMS and GPRS could work.
As for the settings I'll post them here tomorrow, I documented the procedure and settings (after trial and error) but it's in my home PC. Hope it works for you.
tnx a lot
MMS / GPRS Settings for Smart Network via EZWAP 2.5
Set up GPRS:
1. Start> Settings> Connections> Connections
2. Modify "Internet Settings"
3. Click "New":
Enter a name for the connection: SMART GPRS
Select a modem: Cellular Line (GPRS)
Baud Rate: 19200
4. Click "Advanced":
TCP/IP Settings:
Use server assigned IP address
Enable Use software compression
Enable Use IP Header Compression
Name Servers:
Click "Use server specific address"
DNS: 202.57.96.3
Alt DNS: 202.57.96.4
WINS/Alt WINS: 0.0.0.0
5. Click "OK"; "Next"> SMART GPRS
Access Point Name: Internet
6. Finish
7. Dialling Locations> Connections:
Location: Mobile
Enable Tone Dialling
Area Code: 02
Country Code: 63
8. Click "OK"; End
Set up MMS via EZWAP:
1. Open EZWAPv2> Tools> Options
2. General> Connection: SMART GPRS; Connect Automatically
3. Connection> Connection Type:
Gateway: Enabled
Address: 10.102.61.46
Port: 9201
Disabled: Connectionless Gateway; WTLS secured connection
Timeouts: Default
4. Push:
Enable Push
Connection Type: Address: Blank; Port: 2948
Enable Connectionless Push Gateway
Disable WTLS Secured Connection
5. MMS: MMS Settings:
Message Server: http://10.102.61.238:8002
Sender Address Type: Phone Number
Sender Address: +63920nnnnnnn (enter your phone number
here)
6. MMS Options:
MMS Message Options:
Message Expiry: Max
Enable All
7. Save; End
Good luck!
mms gprs settings
tnx in a million morph751, anyway do you have one for globe?my friend is asking bout it also, tnx in advance
Re: mms gprs settings
evan_gerard said:
tnx in a million morph751, anyway do you have one for globe?my friend is asking bout it also, tnx in advance
Click to expand...
Click to collapse
I think it's the same procedure for Globe. You just need to get Globe's IP address and DNS server addresses. Unfortunately, I don't have Globe's settings. You can probably inquire in Globe centers or it may be available at their website. Hope you enjoy your MMS!
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
just go to the ftp site check previous posts.. if you need a copy of the cab files (containing mms settings for both smart and globe.. pati sun) just post yer email address and i'll send them to ya.. the wallaby can send and receive mms.. you just need to download the right cab files... im using arcsoft mms composer version 1.6.0.14 and it works perfectly... :wink:
HELP on MMS Diamond
I'm sure since it's all Windows the settings are either the same or similar right?
I have a diamond, and every time i receive a MMS picture i get charged 10 pesos for GPRS internet connection. Called smart, they said Receiving MMS is free and it is my phone that has a problem. They think that the MMS triggers something, a program maybe, that connects to the GPRS every time i receive MMS pictures.
THey said they cannot fix my phone since they do not carry distribute HTC.
What do i do? Any ideas please
I'm using HTC Fuze here in the Philippines. I just used the NetworkWizard.cab I downloaded. Run it, reboot, and everything works.
I am having trouble sending a picture message through MMS. I installed this - http://forum.ppcgeeks.com/showthread.php?t=59412 - Arcsoft MMS. It now allows me to insert the pictures in my message, but when I go to send it it says:
"In order to send/download MM messages, the current active connection may be closed (this may affect other applications in use. Do you want to continue?" so I hit menu > yes.
Then is says:
Message delivery failed. Or Message receipt failed.
I am running NFSFANs Rom 111
anyone that can help?
GatorsUF said:
anyone that can help?
Click to expand...
Click to collapse
who is your carrier what/who's version of arcsoft did u install. did you check your settings?
Service: Alltel which is now Verizon
Version: SPRINT Arcsoft MMS 5.0.70.24. Threading MMS works! (Updated 3-2-09)
Cabs: Sprint Arcsoft MMS 5.0.70.24.cab and Sprint Arcsoft MMS 5.0.70.24-pm.cab
Neither version would work with my service, I have Alltel and the rls says Sprint, so that may be my problem. All I want to do is send picture messages. My phone can do almost anything I want but it can't send a picture message that my old Nokia from 3 years ago could do?
Thnx for the help btw
P.S. another odd bug with that Arcsoft program is when I go to check my emails and hit "Mark All as Read" it opens the Arcsoft settings...wierd...
ok so go to your inbox then press menu/mms options(may say pics and video options)/servers/alltel. if alltel isnt there just click on the default. if alltel is there and not the default-set it to default and delete others. then open the default. here is your settings.
server name: Alltel MMSC
Gateway: mms.alltel.com
port:8080 (try 8080 first if it doesnt work try just 80)
server address: http://mms.alltel.com/servlets/mms
connect via: the internet
send limit: i have mine set 100k currently
if you dont care to use an older arcsoft just install this it should work right from the get go. im pretty sure its calkulins. ive used it 4ever.
any chance you can get this app to work with the TELUS network?
That would be great if it worked for Telus...
Hi,
I am using ArcSoft MMS Composer 5.0.31.11 in my hermes, i just want to ask that how can i edit the mms settings stored in mms options > servers.