Hello i have a big problem with my new spv m1000 - It's locked with a password. Phone sell me a friend. Phone has a WM2003. How to reset all to default (including password) I don't have a craddle (only mmc/sd reader) reformating without craddle is possible?? how to reset. I tried everything when i power on with mmc (blank formated in sd/mmc drive) pda displaying this:
Cognito
Warning: this device is locked
If you are installing from the MMC card please wait.
otherwise, either insert the MMC card and do a cold boot,
or contact Cognito to unlock the device
[ space for password] [ button OK ]
Version 1.1
When i remove card and boot - pda displays
Enter your password and tap OK
What should i do with this?? Is any chance to hard reset ,format or something without craddle??
How i clear this password??
Please Help me (
Just try a hard-reset
power button + camera button + reset with stylius about 4 seconds
not working password still exist :/
Any ideas?? anyone?? please
Your friend has sold you a device he shouldn't have, its either issued by his work or he's got it from someone else.
Hi
I have the same problem.
cognito password
i flased the himalaya with WM2003se, but still it asking password (after screen setup menu)
can somebody please help
thanks in advance
pitonline said:
Hello i have a big problem with my new spv m1000 - It's locked with a password. Phone sell me a friend. Phone has a WM2003. How to reset all to default (including password) I don't have a craddle (only mmc/sd reader) reformating without craddle is possible?? how to reset. I tried everything when i power on with mmc (blank formated in sd/mmc drive) pda displaying this:
Cognito
Warning: this device is locked
If you are installing from the MMC card please wait.
otherwise, either insert the MMC card and do a cold boot,
or contact Cognito to unlock the device
[ space for password] [ button OK ]
Version 1.1
When i remove card and boot - pda displays
Enter your password and tap OK
What should i do with this?? Is any chance to hard reset ,format or something without craddle??
How i clear this password??
Please Help me (
Click to expand...
Click to collapse
is ur pda displaying country lock?
i do have same problem my xda is asking for password
its not country locked no functions are available it only asks for password on screen ?
Related
Here's something weird...
I have an early model PH10A XDA II...
was on ROM 0.81.00 USA
Radio: 1.05.09
Protocol: 1337.10b
Date 8-11-03
I'm trying to upgrade it to the latest i-mate ROM.
I have gotten to the point where it says "The current software is now being erased....the update should take 30 minutes." but the first time...it gave me an error and it asked me to reboot the device and try again...since then...
....it stays there for hours with no update, no errors, or feedback of any kind. All I get on the RUULog.log is "17:24:10 Connection with USB"..then nothing happens...
I have tried re-boots, hard boots, taking the battery out and waiting a few mins, making sure the battery is charged, I'm on XP and the latest Activesync 3.7.1, also I kill the wces...exe. app and still sits there..
I have tried the O2 version, the UK-02-version, himalayaupgradeut_197.exe...all to no avail...
Any other things I should attempt? I'm bootloader 0.23....
I'm still scouring the groups to see if anyone had this problem..
thanks!
re:Weird problem with early model HTC XDA II with 0.23 btldr
Thanks to these posts I can safely say I found a partial solution that works. From other similar posting, it seems the early bootloader 0.23 was a pre-release demo and not for public consumption...so this USB upgrade process does not work for this version.
What worked for me using this bootloader version was a combination of the posting here http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=93&PN=1 - using their choice #3.
1. Download ROM 1[1].72 SD.rar (ROM 1.72)
2. Extract ROM 1[1].72 SD.rar with WinRAR, you will find two files; ntrw.exe and ROM.nb1
3. Put them in any folder; say c:\ROM\
4. Go to DOS command and the folder contains the files
5. Type C:\ROM>ntrw write ROM.nb1 E: (Assume your card reader drive is E as shown in the below figure. Wait until finish writing the rom.
6. Put SD card into your XDAII, go to bootloader mode (Power + Reset + Directional Pad) and follow instruction on your device screen.
However, for this bootloader it definitely wanted a RAW formatted SD card, not a card formatted by XP/2000 card readers. I also tried other devices format Treo 600, etc...but what did the trick was to do a save to SD command using the USB/Serial program ROMUPDATE.exe located somewhere on this board.
This allowed the card to work with the bootloader...
Once this was done...I was able to insert the card on the card reader (and get an error - ingnore since it was raw format)...and type step #5.
Once this was done I was able to boot the device again.
To note..most of the solutions posted here work for public release bootloaders above 1.0...but this was an early release bootloader...and this is how you get this one to work. NOT using USB.
Now the next task is ...how do I upgrade the bootloader?
pda t-mobile mda ph10a
hi i have an old pda ph 10a ,and i want to know how to hard reset device, when i pres (power,navigation key ,and reset) mesage apears on screen says( serial v1,06) and nothing hapens
does anyone know how to reset and try to restore setings from pda (its on a german ,so that is more dificult)
removing SD card from device should solve your problem
pedjaar said:
hi i have an old pda ph 10a ,and i want to know how to hard reset device, when i pres (power,navigation key ,and reset) mesage apears on screen says( serial v1,06) and nothing hapens
does anyone know how to reset and try to restore setings from pda (its on a german ,so that is more dificult)
Click to expand...
Click to collapse
for hard reset u need not to press the navigation key just press power and reset.
and if this does not help try reinstalling the rom in boot loder mode(serial 1.06).
Hello all,
Ive just upgraded my phone to the WM6 "Fantastic Mobiz v2.0b3" everything went smooth, no errors.
until the device starts and starts the wizard, tab the screen .... and so on. when it reached to if i wanna set a password to protect the device.
ok i entered the password and confirm it. finished the wizard. then the device restarted, and now it asks about the password, when i enter it it says the password is incorrect.
Activsync also can not connect when the the device is locked.
What to do now? plz help!
sorrowt said:
Hello all,
Ive just upgraded my phone to the WM6 "Fantastic Mobiz v2.0b3" everything went smooth, no errors.
until the device starts and starts the wizard, tab the screen .... and so on. when it reached to if i wanna set a password to protect the device.
ok i entered the password and confirm it. finished the wizard. then the device restarted, and now it asks about the password, when i enter it it says the password is incorrect.
Activsync also can not connect when the the device is locked.
What to do now? plz help!
Click to expand...
Click to collapse
It's a known WM6 bug.I will sometime forget the password,so don't use a password...
after setup PW etc ... make a clean shutdown!! It means ... switch it off and on again. this flush the registry back to rom. then he knows the PW after soft reset.
Hello guys, thanks for the replies, well thats good, it means there is still a solution .
But i didnt get it yet, what should i do? i soon as the device starts it asks for the password, how can i flash it again? and which file should i flash?
thanks
Just make a hard reset, the password will be gone
solution sofar?
hello all,
any solution of that problem so far?
I did a mistake when I buy my Prophet first may yours is the same
If you choose "basic" password at the beginning it only accepts the "numbers" it doesn't allow you to enter letters.
Bu the password input screen allows it.
So if you write letters during your first password setting and if you didn't recognize that those are not accepted you feel you are in trouble.
My advice is "try just the numbers in your password and tap OK"..
good luck
HARD RESET
had this problem as well. luckily it was soon after i upgraded.
so yeah do a hard reset unfortunately. now i don't have a pw at all
NetrunnerAT - does that actually work?
Hi all,
I have a Hermes here (MDA version from Tmobile UK)
We know the customer has quite literally "fingered" the unit in all ways possible
At the time, he "claimed" to be a windows mobile developer who invented WM5 - dare I say more?
OK so the Hermes is doing the following:
Stuck on Bootloader screen
Herm300
IPL-1.04
Herm300
SPL-2.03
When I do a hard reset via the two soft keys and reset button, the phone boots up with the t-mobile splash with Test Only Not For Sale
Carries on booting, goes through the whole setting up procedure
Then on the reboot, it goes back to bootloader
Now Once I managed to reset and it simply booted in with me using the phone perfectly
The second time I reset, the phone went into a white screen but you could tell it was booting up.
I'm now back in bootloader which refuses to go any further.
Tried running Hard-SPL on it but it can't seem to detect the unit despite it going from Serial to USB
Appreciate any help
On PC (if u use XP), untick "Allow USB Connections" in activesync settings. Put Hermes into bootloader and connect to pc.
Install Hard SPL. Hermes WILL be detected by the Installation program.
Then try installing a new OS, now you should have Hard SPL I'd use the sd card method.
1. Format 2Gb or less sd card FAT32.
2. Copy .nbh file of the rom you want to it and rename to hermimg.nbh.
3 Insert into Hermes and reset to bootloader, follow the instructions....
Should install a new OS and get rid of that "testing only" message.
Cheers...
I follow to your guy , so my device flash :
IPL - Ok
Bootloader - ok
GSM -
It hand on there.
Can you held me now.
My device 's Softbank X01HT, I reflash original ROM (Japanese language)
i searched the forum for 4 days tioo have a clear solution for thos 2 niki100 i recieved the stuck at the operator logo tim from brazil i dont know what my clients did to them but apears the they try to play over upgrading any way im looking for reflashing the same rom to have them back a life again.
i tested many thread posted here buy members i downlaoded many rom that never works with this kind of problem but when i found the mtty command task 2a then boot one of them turnd with a white screen but stell enter boot mode well for peopole how like to help me the spl on the boot mode is
spl 1.21
R 1.58.21.26
G 25.65.30.04H
D 1.35
VENDOR ID TIM BRAZIL
PLEAS GUYS I NEED TO SLEEP ANY HELP FROM EXPERTS WELL BE GOOD AND USEFULL
REGrds to alll
I need this original rom as well, not possibile download from oficial site....Serial number not acepted!!
Phone stuck on operator logo...cant hard spl!!!
is it any of these...
http://shipped-roms.com/shipped/Nike/
DT
Cant see mine R 1.58.21.26....anyway thx!!
theres other way to revive my Niki?
edcentec said:
Cant see mine R 1.58.21.26....anyway thx!!
theres other way to revive my Niki?
Click to expand...
Click to collapse
These are possibly updated versions of your area's stock ROM, the 1.58 radio would be a version 1 ROM, where the 1.65 radio are the version 2 ROMs.
Does it have Hard SPL installed? If not, see if it will install it, then you can install any ROM.
There are other things that can be tried using MTTY, but I am no expert on that - there is a thread on it though.
DT
Could you tell us what you did, I mean did you already tried a hard reset or something simular, and which rom you where using when the phone freeze.
Hard reset
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings -‑ the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
To perform a hard reset
1. Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the left side of your device.
2. Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen:
3. Release the TALK and END buttons, and then press ENTER on your device.
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
Important If Encrypt files placed on storage cards is or was enabled before, then backup all files from the storage card before using Clear Storage, hard reset or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.
Click to expand...
Click to collapse
Greetz,
the most obvious about my athena
ATHE100
IPL-v1.00
SPL-v1.10.0000
mo-bo has some problems like i.e. USB is not working for synchronizing and upgrade, charging is OK, microdrive is not accessible to the only option to upgrade remains via SD card
today during hard reset .... I am stuck on loop of factory reset which is supposed to do hard reset but it does not
after powering up (after completing steps on the screen) the screen is snow white and nothing happens
when I take out the battery and put it back in ... it still gets me to the same point i.e. to hard reset screen yes/no (i.e. press action to restore factory default, press camera key to exit)
can anyone please tell me :
1. how to upgrade my SPL ?
2. how to solve a/m problem ?
and possibly where to find the latest wm60 English ROM for my spl that I can install from SD card
regards
andrzej