Hi! Can anyone tell me how can I disassemble my O2 XDA? I need to check the transmitter (GPRS doesn't work), but I cannot unmount the front panel: smth in the upper side doesn't let it go! And I cannot see, it may be a ribbon cable (but it also can be just a glue or something). So can anyone tell me, what should I do? Or may be give me a link, where I can find all the procedure with pictures? Thank you!
See if this answers your question
http://forum.xda-developers.com/viewtopic.php?t=15622
Related
My Virba Motor is broken, one of the pins snapped off inside the XDA (I not II). I need a replacement motor but I can't find one anywhere on the web. I've even phoned O2 to see if they could help. Does any have a spare they could sell me, or know of a site that supplies them? Any help would be appreciated.
Please help!!! Anyone??? My girlfriend keeps killing me because I don't know she is ringing me!!!
Yeah! Girls do not like it when the vib is not working! :?
I think the vibra motor for the nokia 3210 might do the trick.
I know a person in my country most possibly capable of ...
fixing that motor, and according to his words it is to be very simple task (we had a talk specifically on that subject the other day) .... but my wild guess is that a hell far from where you live
regards, monika
Thanks for replies. I'll look into the nokia motor. The original motor is beyond repair, one of the connection pins snapped off inside the XDA, couldn't even solder it back on due to position of the break and how small it is.
can you make some pictures of scans pls ??
i'd post it to my friend and we see what he says
regards, monika
Success! I had an old Nokia 6210 which I nicked the motor out of and I managed to fit it (not easily) into the XDA. It works! I would still like a proper XDA motor but I'm a happy chappy for the moment.
Hello,
I have the spike of my headset broken inside my XDA. I cannot remove it.
It of course disables the sound.
So, as my provider doesn't want to repare it, I'd like to disconnect the jack connector (or change it maybe) into my XDA.
I looked the pictures of the naked XDA but I don't see what I have to disconnect.
Does someone indicates me more in details or send me a picture... to help me to see what I have to do.
Thx
Hi
Can anybody confirm if sound is wired into the main connector, I currently plug into the headphone / microphone jack plug to get TomTom sounds in the car, but it would be much more convenient to insert just one connector instead of two.
Has the connector wiring diagram been published anywhere?
Cheers
Justin
oops
I have just found it
http://wiki.xda-developers.com/wiki/Connectors
Justin
Good luck!
Hi
The wiring diagram from
http://wiki.xda-developers.com/wiki/Connectors is incorrect for the Himalya.
I only managed to get sound from one channel, and grounding pin 19 did not switch off the internal speaker.
Does anybody know of another source of the pinout for the connector.
I could buy a http://www.expansys.com/product.asp?code=108730 but that seems expensive.
Cheers
Justin
Justin,
More than one source confirmed the pinout of the connector is correct for the Himalaya.
Are you sure you did not get thing wrong?
Maybe some other threads (key word "carkit" or "car kit") are of interest for you.
YES sound is fed to the bottom connector
BUT dependent of who you speak with (ie which rom theyre using):
- all sound (both in-call phone and pda)
- in-call phone only
Unfortunately my carkit (O2 XDA II as sold by Expansys) only let me hear in-call phone sound. My rom is the T-Mobile 1.60.00 (1.60.36 ext rom).
Hi edsub
After posting I read about the problem with sound only comming out of the bottom connector when In a call, I didn't try this. Hopefully a later ROM will fix this issue. Until then I will use the headset jack plug.
Cheers
Justin
justinp said:
I only managed to get sound from one channel
Click to expand...
Click to collapse
I have the same problem with the original CarKit of the XDA I.
So this could be a general problem....
Stefan
I used to have stereo from the bottomconnector from my XDA 1, but not from my MDA 2...
As far as imknow Edsub is correct, only in-call audio works for now with most ROM's...
Getting all-audio through the speakers seems to be a rare story...
@johan: It sure is a rare story. Especially from the stories that seem to imply that one it getting all sound thru the bottom connector, I only got feedback from one person that claimed this was the case for rom 1.60.00 in combination with the T-Mobile MDAII carkit.
Which makes it even stranger because that same rom is the one I am using (and only having in-call phone audio) . . .
:?:
edsub said:
@johan: It sure is a rare story. Especially from the stories that seem to imply that one it getting all sound thru the bottom connector, I only got feedback from one person that claimed this was the case for rom 1.60.00 in combination with the T-Mobile MDAII carkit.
Which makes it even stranger because that same rom is the one I am using (and only having in-call phone audio) . . .
:?:
Click to expand...
Click to collapse
Rare (Eng.) = Zeldzaam (NL.) :roll:
I only read one story of a guy who said Tomtom work through the speaker, i'm afraid the was another mixup about waht speaker. The internal one or not....
According to Mocki on www.ppc-welt.info two pins are important:
pin19 should be grounded
pin9 should be UNconnected
This situation makes the T-Mobile carkit behave like wished:
When there is sound output (no matter what source):
1. radio is muted
2. sound goes via bottom connector to carkit-speakers (or car-audio line-in)
Does anyone know how pin 9 is connected inside the O2 XDAII carkit???
Help - can see any of it!
Hi
http://wiki.xda-developers.com/wiki/Connectors just gives me XML/XSL errors, and I cant speak German - really could do with a wiring diagram for the bottom connector.
I have Carcomm car cradles, Nokia Bluetooth car kits (kinda of works now) and a very neat bluetooth head set. I want the cradle to send audio to an aux input on the car stereo so I can play MP3's from the 512 SD card I just got!!
I can drill a hole in the bottom of the carcomm and attach a 3.5mm jack but it would be much better if I could use the connector
Ta!!
Re: Help - can see any of it!
JONTYB said:
http://wiki.xda-developers.com/wiki/Connectors just gives me XML/XSL errors, and I cant speak German - really could do with a wiring diagram for the bottom connector.
Click to expand...
Click to collapse
If you use an other browser than the Internet Explorer (e g. Mozilla) you ´ll be able to see the page....
I made 2 Screenshots of the important part. Hope it helps you....
HTH
Stefan
Wiring for bottom connector
Hii
Thanks for that - something to do this weekend now!!
:lol:
JB
Hi
If that works it will be great, I'm not going to try it until someone else confirms it works as I need to get a hardware guy to do the soldering for me.
So if any of you are going to try it, please remember to post back here.
Cheers
JustinP
hi, does any1 know where to get the plastic service tool for the xda 2 ?
or what else can be used just as good ?
also any1 know where to get parts ie speaker ? mic ? or battery connector ?
i think the actual part is called the sync connector ?
cheers
ok, i dnt need the plastic service tool anymore, but does any1 know where to get spare parts like the speaker or mic ?
also does any1 have any ideas on how to solder the 22pin battery/sync connector ? or where i can get it done ?
cheers
I have a vast stock of all ORIGINAL xda/xda2/xda2i accessories. Need anything email me or see me on ebay...
cheers
computerchid
Hey Brothers
I Have a HTC Blueangel Orange SPVM2000
I have Broken My 2.5 mm Headset Audio Connector
& The Tracks on Mainboard also Broken
Plz Send Me the Schematic Diagram for Mainboard of Blueangel.
plz PM me or Mail me on [email protected]
hi...
if you want, i have a blueangel to sell...
it's perfect, except a broken flat-cable of screen, and one of sliding mechanism of housing cover... if you are interested, or you know someone that may be, contact me there or at [email protected].
bye
hello guys ... I have a problem with my Blueangel need the Schematic Diagram to repair a problem with the keyboard or lines (q, a, z) is not working and I tried the keyboard is fine. but card problem .. I think they burn lines (q, a, z) please
maybe a look into the bluangel service manual (in my signature) will help you.