can i upgrade my o2 xda2 rom with the uk version...i have a phone which i bought in india....
rom version 1.66.00WWE
ROM DATE 02/20/04
RADIO VERSION 1.08.00
PROTOCOL VERSION 1337.18
ExTROM VERSION 1.66.165
this is the my xda 2 rom...
and updated rom is available but only for uk phones....ROM version 1.72.181
Radio version 1.17...is the new upgrade
thank u
yeah when it's wwe which mean world wide english it should be able to use any english rom without you having to worry about country code changing
thanx so much mr rudegar....
should i follow the procedures given in the manul and upgrade it...
also doest the o2 have some network lock or so
m worried abt tat..if u cud clarify tat things wud b crystal clear
thanx again i appreciate ur help
if it's locked then the 3th post from the top explain how to remove the lock
and wiki have a good guide how one upgrade the device
thanx mr rudegar
i've already upgrade it and it works fine
no network lock
thanx again
what to do ???
Which Radio Version is installed?
Maybe this http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_Unlock2helps you....
Stefan
i checked my radio ver:
its:
rom: 3.17.03 eng
radio: A.20.11
Protocol: 324e4
to i realy need to do the whole process in the link
i dont have sd card
thanks
one more thing
how do i know if its 900/1800 or 900/1900 version
it was at&t
I think at&t just has 900/1900 devices.....
Check the rear sticker of you´re device.
If it´s a PW10A then 900/1800, if it´s a PW10B than it´s a 900/1900.
Do not trust the output of the os....
Stefan
well, i just bought
Sd card on Ebay
and i will try this method
anyway Thanks
Hi,
i have buy a used Siemens SX56.
Rom version: 3.17.03 Eng
Radio: 6.12
Protocol: 324e4
I have found Device information>identity tha is the model PW10A1 but in the rear of the pda is PW10B1 ?!?! What is possible?
In Setting>connection>connections>internet setting i have write my gprs parameters but i don't see the phone number!
The rom version and radio version is ok?
Thanks
Re: Help with gprs Italian WIND carrier and other problem...
klikkete said:
I have found Device information>identity tha is the model PW10A1 but in the rear of the pda is PW10B1 ?!?! What is possible?
Click to expand...
Click to collapse
Just the rear sticker is impotant. You have PW10B device.
This device is just capable of 900/1900 MHz networks.
Stefan
Re: Help with gprs Italian WIND carrier and other problem...
Ok...
can you tell me the optimal configuration for rom+radio?
What version?
Thanks
LumpiStefan said:
klikkete said:
I have found Device information>identity tha is the model PW10A1 but in the rear of the pda is PW10B1 ?!?! What is possible?
Click to expand...
Click to collapse
Just the rear sticker is impotant. You have PW10B device.
This device is just capable of 900/1900 MHz networks.
Stefan
Click to expand...
Click to collapse
1. Is O2 XDA is the same models like Siemens SX65 AT&T wirelles?
http://www.pdagold.com/hardware/detail.asp?d=124
.: Extra info & Model comparison
Sold in Central Europe as O2 XDA by O2
SIM-free O2 XDA sold by Expansys
Sold in North America as Siemens SX56 by AT&T
Sold in Sweden as Qtek 1010, previously known as Joey
Sold in several countries as T-Mobile MDA by T-Mobile
2. When i download upgrade in http://www.my-xda.com/xda_soft.html and i install to my PDA Siemens SX65 AT&T, now my PDA doesn't have any signal event i change my SIM Card??
this is the name file : Radio_Stack_Upgrade_v421 and Radio_Unit_Upgrade_v31703, when i download Radio_Stack_Upgrade_v421 then after restart, my PDA is no signal, so i don't continue to install Radio_Unit_Upgrade_v31703.
Note: when i install, my sim card still plug-in.
the network only :
ST-GSM-SGP
ST-GSM1800-SGP
Globe
AIS GSM
OPTUS
AirTel
SPICE
dont have TELKOMSEL (indonesia).
Can u help me to fixed my PDA,???
What model do you have? Check the rar sticker...
PW10A are for 900/1800 MHz
PW10B are for 900/1900 MHz
Stefan
different name
LumpiStefan said:
What model do you have? Check the rar sticker...
PW10A are for 900/1800 MHz
PW10B are for 900/1900 MHz
Stefan
Click to expand...
Click to collapse
opps...thank for your advice, now i have different name in my PDA, in the sticker label is PW10B1 and in my device information Identity the model no is PW10A1... ehm? i need your advice again to fixed my siemens PDA, thank you..
gohengky said:
opps...thank for your advice, now i have different name in my PDA, in the sticker label is PW10B1 and in my device information Identity the model no is PW10A1... ehm? i need your advice again to fixed my siemens PDA, thank you..
Click to expand...
Click to collapse
Different names are no problem.
It depends on what rear sticker say. So you have a PW10B device. Tehreforen 4.xx Radio Versions do not work try the 6.xx
Also you have to ensure your provider works either on 900 or 1900 MHz....
Stefan
LumpiStefan said:
Different names are no problem.
It depends on what rear sticker say. So you have a PW10B device. Tehreforen 4.xx Radio Versions do not work try the 6.xx
Also you have to ensure your provider works either on 900 or 1900 MHz....
Stefan
Click to expand...
Click to collapse
Mr. Stefan..
i am confused.., ehm, so i must try 4.xx radio vers if doesn't work so i must try 6.xx , were i can found it?? http://www.romkitchen.de/ or where ... please help me, replace PW10A1 to PW10B1 again ..
now my device information after i change is :
bootloader V5.22
rom vers : 3.17.03 ENG
rom date : 05/15/03
radio vers : 4.21.00
Protocol vers : 32S54
Model no .: PW10A1
Platform : pocket PC
Is that correct ??
my sim card is TELKOMSEL - indonesia , GSM Dual Band (900 & 1800),
http://www.telkomsel.com/web/company_profile
Dear Mr. Stefan,
i really need advice ...
thank you.
PW10B devices require 6.xx RSU-Version. You should You should then also fix the bandwith to 900 MHz in Bootloader
http://wiki.xda-developers.com/index.php?pagename=ChangingBandsWithBootloader
RSU Version can be found on www.romkitchen.de/tools/
The displaying of PW10A in your system depends on the ROM and is complete unimportant.....
Stefan
now is fixed
LumpiStefan said:
PW10B devices require 6.xx RSU-Version. You should You should then also fix the bandwith to 900 MHz in Bootloader
http://wiki.xda-developers.com/index.php?pagename=ChangingBandsWithBootloader
RSU Version can be found on www.romkitchen.de/tools/
The displaying of PW10A in your system depends on the ROM and is complete unimportant.....
Stefan
Click to expand...
Click to collapse
Dear Mr. Stefan
Thanks for your advice, now my PDA Siemens SX65 AT&T is work again, But i am not follow your instruction..i use the other way..now i want to share my step to fixed my PDA :
1. Download Radio Unit 6.24 version, find at : http://www.yorch.net/ ---go to --- http://www.yorch.net/upgrades.htm
USA T-mobile Latest Radio Stack (Unofficial)
RU 6.24.00
2. Install RU 6.24.00 in to your PDA,put in /windows find in Windows Explorer.
3. Wait for a second, and then will search the network...
4. Success.....
my device information is PW10A1 and not PW10B1 (the label in the back pda) how come is still can work?? But,anyway its Ok,because my phone is work again..
Thank you for your advice Mr. LumpiStefan.
That is very interesting.I like it very much.where can i find it?
________________________________
Rm files
to : mukojin776
you can find at : http://www.yorch.net/ but i dont recommend you to modify your phone, if you have commitment, than do it.. and i am not & dont have responsible if your phone is death..
You can ask Mr. Lumpistefan advice if you want to upgrade or modify your phone.
Enjoy your explore...
Thank you.
How to use SX56 with Airtel(India)?
AirTel (India)? what happen with that? if your XDA (SX56) can work, so??? what do mind by that? your phone is blocked??or doesn't have signal?? can explain about that??
I have a AT&T (Wallaby PW10B1). When I inserted a local SIM, But No Signal in pakistan what i do. Please help me.
Hardware: PW10B1
Platform: PocketPC
ROM Version: A.30.09 ENG
ROM Date: 01/01/04
Radio Version: 6.12
Protocol Version: 324e4
IT urgent thanks in advance.
BR.
I do not know what for network bands you in pakistan.
PW10B-Devices just support 900MHz and 1900Mhz.
Maybe this is your problem.....
Stefan
LumpiStefan said:
I do not know what for network bands you in pakistan.
PW10B-Devices just support 900MHz and 1900Mhz.
Maybe this is your problem.....
Stefan
Click to expand...
Click to collapse
In pakistan network bands is 900mhz and 1800mhz.
You can try this one:
http://wiki.xda-developers.com/index.php?pagename=ChangingBandsWithBootloader
But pay attention. Entering Bootloader causes a hard reset. All data on the device will be lost.
Stefan