Hello I have a XDA2 (QTEK2020) locked with ONE AUSTRIA i tried to unlock it with XDA2UNLOCK but the Software means your phone is already unlocked ..... but after the next reboot the message network is locked !?!?!
Now installed:
ROM-VERSION 1.60.00GER
ROM-Datum: 12/03/03
RADIO: 1.06.01
Protokoll Version 1337.16
Ext ROM 1.72.572
how can i unlock this ?!?!?!?!?
thanks marty
are you sure you are taking the right steps to unlock it ??
you are suppose to copy xda2unlock-v2.2.exe on to your device and then run it after that it provides all the information.....
and by "but the Software means" what do you mean ?? do you mean that after running the tool it says phone already unlocked ???
http://forum.xda-developers.com/viewtopic.php?t=6963
read the detail here its as easy as eatin a cake.....
regards
jeetz
Hello now it works *fg* wrong or not activatet SIM card no modem *gggg* now it works with all providers ;-) thanks a lot !!!!
hi im using the qtek 1010 with this information
ROM VERSION 4.01.16 ENG
ROM DATE: 02/04/2004
RADIO VERSION 3.23.00
PROTOCOL VERSION 32S54
THE PROBLRM IS IM IN LEBANON AND WHEN I INSERT SIM CARD BY PHONE SAY NO SIGNAL
ANY HELP HERE PLEASE
check the back of ur xda whether it is model: PW10A or PW10B, here in Egypt the PW10A is the working model, and i think it is the same at lebanon. inform me with the result!
King_hatem said:
check the back of ur xda whether it is model: PW10A or PW10B, here in Egypt the PW10A is the working model, and i think it is the same at lebanon. inform me with the result!
Click to expand...
Click to collapse
same here man in the back i have PW10A
Hi,
i have buy a used Siemens SX56.
Rom version: 3.17.03 Eng
Radio: 6.12
Protocol: 324e4
I have found Device information>identity tha is the model PW10A1 but in the rear of the pda is PW10B1 ?!?! What is possible?
In Setting>connection>connections>internet setting i have write my gprs parameters but i don't see the phone number!
The rom version and radio version is ok?
Thanks
Re: Help with gprs Italian WIND carrier and other problem...
klikkete said:
I have found Device information>identity tha is the model PW10A1 but in the rear of the pda is PW10B1 ?!?! What is possible?
Click to expand...
Click to collapse
Just the rear sticker is impotant. You have PW10B device.
This device is just capable of 900/1900 MHz networks.
Stefan
Re: Help with gprs Italian WIND carrier and other problem...
Ok...
can you tell me the optimal configuration for rom+radio?
What version?
Thanks
LumpiStefan said:
klikkete said:
I have found Device information>identity tha is the model PW10A1 but in the rear of the pda is PW10B1 ?!?! What is possible?
Click to expand...
Click to collapse
Just the rear sticker is impotant. You have PW10B device.
This device is just capable of 900/1900 MHz networks.
Stefan
Click to expand...
Click to collapse
1. Is O2 XDA is the same models like Siemens SX65 AT&T wirelles?
http://www.pdagold.com/hardware/detail.asp?d=124
.: Extra info & Model comparison
Sold in Central Europe as O2 XDA by O2
SIM-free O2 XDA sold by Expansys
Sold in North America as Siemens SX56 by AT&T
Sold in Sweden as Qtek 1010, previously known as Joey
Sold in several countries as T-Mobile MDA by T-Mobile
2. When i download upgrade in http://www.my-xda.com/xda_soft.html and i install to my PDA Siemens SX65 AT&T, now my PDA doesn't have any signal event i change my SIM Card??
this is the name file : Radio_Stack_Upgrade_v421 and Radio_Unit_Upgrade_v31703, when i download Radio_Stack_Upgrade_v421 then after restart, my PDA is no signal, so i don't continue to install Radio_Unit_Upgrade_v31703.
Note: when i install, my sim card still plug-in.
the network only :
ST-GSM-SGP
ST-GSM1800-SGP
Globe
AIS GSM
OPTUS
AirTel
SPICE
dont have TELKOMSEL (indonesia).
Can u help me to fixed my PDA,???
What model do you have? Check the rar sticker...
PW10A are for 900/1800 MHz
PW10B are for 900/1900 MHz
Stefan
different name
LumpiStefan said:
What model do you have? Check the rar sticker...
PW10A are for 900/1800 MHz
PW10B are for 900/1900 MHz
Stefan
Click to expand...
Click to collapse
opps...thank for your advice, now i have different name in my PDA, in the sticker label is PW10B1 and in my device information Identity the model no is PW10A1... ehm? i need your advice again to fixed my siemens PDA, thank you..
gohengky said:
opps...thank for your advice, now i have different name in my PDA, in the sticker label is PW10B1 and in my device information Identity the model no is PW10A1... ehm? i need your advice again to fixed my siemens PDA, thank you..
Click to expand...
Click to collapse
Different names are no problem.
It depends on what rear sticker say. So you have a PW10B device. Tehreforen 4.xx Radio Versions do not work try the 6.xx
Also you have to ensure your provider works either on 900 or 1900 MHz....
Stefan
LumpiStefan said:
Different names are no problem.
It depends on what rear sticker say. So you have a PW10B device. Tehreforen 4.xx Radio Versions do not work try the 6.xx
Also you have to ensure your provider works either on 900 or 1900 MHz....
Stefan
Click to expand...
Click to collapse
Mr. Stefan..
i am confused.., ehm, so i must try 4.xx radio vers if doesn't work so i must try 6.xx , were i can found it?? http://www.romkitchen.de/ or where ... please help me, replace PW10A1 to PW10B1 again ..
now my device information after i change is :
bootloader V5.22
rom vers : 3.17.03 ENG
rom date : 05/15/03
radio vers : 4.21.00
Protocol vers : 32S54
Model no .: PW10A1
Platform : pocket PC
Is that correct ??
my sim card is TELKOMSEL - indonesia , GSM Dual Band (900 & 1800),
http://www.telkomsel.com/web/company_profile
Dear Mr. Stefan,
i really need advice ...
thank you.
PW10B devices require 6.xx RSU-Version. You should You should then also fix the bandwith to 900 MHz in Bootloader
http://wiki.xda-developers.com/index.php?pagename=ChangingBandsWithBootloader
RSU Version can be found on www.romkitchen.de/tools/
The displaying of PW10A in your system depends on the ROM and is complete unimportant.....
Stefan
now is fixed
LumpiStefan said:
PW10B devices require 6.xx RSU-Version. You should You should then also fix the bandwith to 900 MHz in Bootloader
http://wiki.xda-developers.com/index.php?pagename=ChangingBandsWithBootloader
RSU Version can be found on www.romkitchen.de/tools/
The displaying of PW10A in your system depends on the ROM and is complete unimportant.....
Stefan
Click to expand...
Click to collapse
Dear Mr. Stefan
Thanks for your advice, now my PDA Siemens SX65 AT&T is work again, But i am not follow your instruction..i use the other way..now i want to share my step to fixed my PDA :
1. Download Radio Unit 6.24 version, find at : http://www.yorch.net/ ---go to --- http://www.yorch.net/upgrades.htm
USA T-mobile Latest Radio Stack (Unofficial)
RU 6.24.00
2. Install RU 6.24.00 in to your PDA,put in /windows find in Windows Explorer.
3. Wait for a second, and then will search the network...
4. Success.....
my device information is PW10A1 and not PW10B1 (the label in the back pda) how come is still can work?? But,anyway its Ok,because my phone is work again..
Thank you for your advice Mr. LumpiStefan.
That is very interesting.I like it very much.where can i find it?
________________________________
Rm files
to : mukojin776
you can find at : http://www.yorch.net/ but i dont recommend you to modify your phone, if you have commitment, than do it.. and i am not & dont have responsible if your phone is death..
You can ask Mr. Lumpistefan advice if you want to upgrade or modify your phone.
Enjoy your explore...
Thank you.
How to use SX56 with Airtel(India)?
AirTel (India)? what happen with that? if your XDA (SX56) can work, so??? what do mind by that? your phone is blocked??or doesn't have signal?? can explain about that??
I'm in the process of downgrading my UK T-Mobile MDA Vario2 from schaps 3.57/Radio1.50/HardSPL2.10/etc, for warranty purposes.
With the help of this thread and this guide, I'm back to WM5, SPL 1.04, IPL 1.00:
ROM 1.21.110.3 (01/17/07)
Radio 1.50.00.00
Protocol: 32.83.7020.20H
Obviously I need to downgrade the Radio, but I'm not sure what to. 1.03 rings a bell (although I tried it and got a country-code error). Apart from the Radio, is there anything else I'm missing. Are those SPL/IPL correspond to shipping versions?
If anyone can confirm UK T-Mobile factory version numbers before I send this handset back for repair I'd be very grateful!
Many thanks
sim
OK, I see that Radio 1.05 seems to be the TMUK offering....
sim
Factory Details
Details from my T-mobile Vario 2
ROM VERSION: 1.21.110.3
ROM DATE: 06/19/06
RADIO VERSION: 1.05.05.00
PROTOCOL VER: 32.36.7010.04H
The same as when it left the factory a year ago.
regards
chalky
Cheers man!
sim
tigersim303 said:
Cheers man!
sim
Click to expand...
Click to collapse
You can also check the wiki for shipped ROMs. TMUK may well be there.