I have a hyanes compatible modem showing in the device manager on com1 how do I get rid of this as I have never connected a modem to com1
I think that's standard, it's the phone's modem. Don't worry about it.
V
Related
Please Help
I am trying to use the Rikaline 6010 GPS Receiver with O2 XDA PDA/Phone
Rom Version 3.17.03 ENG
Radio 4.21.00
I have sucessfully installed the USB drivers and tools. When I run comno.exe the PAD reports the COM port for the driver is 4. However if I run the test.exe and attempt to open port 4 it fails.
I have disabled Infared beams on the PDA. I have also done hard reset on the PDA removing all other software. In just installed the drivers.
All other GPS software fail to open PORT 4. Your help would be greatly appreciated.
Regards Richard
Problem solved. The GPS receiver does not require drivers..........
After I upgrade to WM 2003se My USB modem is not working even I start USB modem and detect hardware but not detect any new hardware found.
Help me how to start USB modem in my XDAII with WM2003se.
:lol:
it's working ok with me on SE, but I usually turn the wmodem on before connecting it to the cradle.
hi guys,
now this one really bugs,
i just upgraded to wm5, not only its an amazing experience, its like being in the future with a xda ii in my hand,
but the problem is while using it as an external usb modem
after clicking start in the wireless modem option,, it shows error :-
" COM OPEN ERROR (8).
i had been using the device as a modem with wm2003se it worked fine.
i am not a techie. but would be glad if some one can help me out on htis one plz
thanks
Hi,
Have u ever get a resolution to ur wireless modem issue?
Please shoot me an email ([email protected]) if u want to share experiances; i'm also trying to make this work with WM5
Delete all com ports under bluetooth set-up.
I have deleted all the port on bluetooth set-up but i still cant make my xda ii as a modem.. :'( there still error while opening com port (8) as USB modem... :'( help me please.. :'(
"after clicking start in the wireless modem option,, it shows error :-
" COM OPEN ERROR (8)."
if you get an error on the pda i would look if "auto recieve beams" was turned off
if it's on the pc i would remove all old hidden comports defined in devices
I 've unchek the incoming beam, I also has deleted all the old comport on ny PC, even i 've try it on other PC, but still the com port errors (8) appear. i've also hard reset my XDA ii but still have the same problem. finally I chek the device modem with some kind of tweeking app on my XDA ii, and there's only 4 modem I have on XDA ii,
1. Bluetooh Modem
2. Bluetooh FAX Modem
3. Serial Com (1) Modem
4. and 1 other thing I forgotten
but there is no USB modem built in my Hyma upgrade wm5...
:'( help me please... any one.... :'( i 'll be so greatfull for it... :'(
Notes : i've use Bluetooh as a wireless modem and its works fine unless the speed is so... so... so... slooooooooowwwwww......
help me please.......... :'(
Ok so I am trying to open the GPS on my new phone. I am at the QPST part but I can't add COM4 or COM5 beacuse it says its busy or something? Who can I get it to work?
It also does not show my phone in the service programming section.
Did your phone come with the new update already? Just check and make sure.... Also what rom, spl etc... have you loaded?
My phone came with the original but I had trouble with the Bootloader so I had to flash it with the new ROM but I didn't go through the configuration at the begining of loading the rom. I immediately flashed it to DCD 3.2.6. so Now I have
Radio 3.42.50
ROM DCD 3.2.6
SPL 2.47
ANything else?
This is the error I get from QPST after I go to "Add New Port" ...
"There was an error enabling COM4. The Port may not be working properly or may be busy (-2147467259)"
THe port is not in the port list so I had to put it in manually. It was in QPST before but I removed it and now I can't add it again? What do I do?
JukEboXAuDiO said:
My phone came with the original but I had trouble with the Bootloader so I had to flash it with the new ROM but I didn't go through the configuration at the begining of loading the rom. I immediately flashed it to DCD 3.2.6. so Now I have
Radio 3.42.50
ROM DCD 3.2.6
SPL 2.47
ANything else?
This is the error I get from QPST after I go to "Add New Port" ...
"There was an error enabling COM4. The Port may not be working properly or may be busy (-2147467259)"
THe port is not in the port list so I had to put it in manually. It was in QPST before but I removed it and now I can't add it again? What do I do?
Click to expand...
Click to collapse
Your phone is not connected or you are not running DMR (or whatever). I had this problem when using nueUSB. I had to put it on "dont ask each time I connect" mode and selected to autostart up as ActiveSync. Well thats what was holding me back.
Check deviuce manager in Windows and tell me if the HTC USB Modem shows before you launch QPST but after you put the phone in the Diag Mode.
Oh yeah, you did install the drivers, correct?
Oh and can you get an Active Sync connection before entering the Diag Mode?
Also, I found it handy to reboot after I got those messages, both the phone and the PC. Maybe some sort of hook on the QPST app that wont let it see the new connection until a reboot I was thinking? Possibly locked up the port when trying to connect original. Just theory but thats what worked for me.
mkenny2 said:
Did your phone come with the new update already? Just check and make sure.... Also what rom, spl etc... have you loaded?
Click to expand...
Click to collapse
The new update has nothing to do with QPST. I entered QPST right after flashing to the new Official GPS Rom so i could examine the GPS settings and had no issue at all.
I had the same problem. So, I uninstalled QPST and reinstalled it and it fixed the problem and it worked.. Good luck!
JukEboXAuDiO said:
Ok so I am trying to open the GPS on my new phone. I am at the QPST part but I can't add COM4 or COM5 beacuse it says its busy or something? Who can I get it to work?
Click to expand...
Click to collapse
JukEboXAuDiO said:
Ok so I am trying to open the GPS on my new phone. I am at the QPST part but I can't add COM4 or COM5 beacuse it says its busy or something? Who can I get it to work?
Click to expand...
Click to collapse
You must put your phone in DIAG mode... ##3424... and connect the USB cable... It will "Create" new ports. It won't be the same one that Activesync uses. Open Windows device manager and go to ports. If you unplug and re-plug the cable to the phone and computer... you'll see it disappear and reappear
nitro66215 said:
You must put your phone in DIAG mode... ##3424... and connect the USB cable... It will "Create" new ports. It won't be the same one that Activesync uses. Open Windows device manager and go to ports. If you unplug and re-plug the cable to the phone and computer... you'll see it disappear and reappear
Click to expand...
Click to collapse
Ok so i did that last night and it worked with ports COM6 and COM7. Now I have a problem. i did gc14's GPS fix, did the registry fix, used the certs to disable security and enable it, installed quick GPS and I still can not get a fix with my GARMIN XT program. Any ideas?
JukEboXAuDiO said:
Ok so i did that last night and it worked with ports COM6 and COM7. Now I have a problem. i did gc14's GPS fix, did the registry fix, used the certs to disable security and enable it, installed quick GPS and I still can not get a fix with my GARMIN XT program. Any ideas?
Click to expand...
Click to collapse
did you try GPS Viewer? HERE
I will try it. thanks. Lets hope it works.
Also, make sure Location is set to On and not 911 Only in the phone settings.
Where can I download the agps fix files? The thread that comes up everywhere (http://wiki.xda-developers.com/index.php?pagename=VerizonAGPSFixhas bad links to cinconet.org.
i installed 6.1 rom with 3.37 radio from verizon . then i did unlock with 2.31 coke then flashed nsffans 6.5 rom . now i downloaded wmodem installer and qspt . i put the phone into diag mode and connected to activesync . diag screen goes to today screen and activesync disconnects . then nothing ! when i open add new ports in qspt it shows the two usb comms but when i click them it says busy ! what do i need to do to get the dmr to not switch to today screen
You don't have a HTC titan 6800. You should be posting under your vogue phone category. I have told you before to post the in the other section I don't understand why you don't listen.
Hello, i'm trying to upgrade my device but facing a weird problem. The WMDC works fine and i can sync my device. When i run the RUU, it analyzes the rom and put the device in bootloader mode....
as soon as the device enters the bootloader, the usb loses the connection and says "cannot recognize the device" or "drivers not found" etc....and the RUU gives the error of "cannot connect to the device. make sure...."
I have tried this with the AthenaUnlocker as well as the AthenaWrapper. I'm currently on SPL 1.1 and want to upgrade to 1.2
Please help!
I have the same problem!
I want to install HSPL on my device. I cannot install this via SD Card so i tried it with USB. But after the bootloader the connenction was lost. Many times...
Can somebody tell me how to fix this problem?
Thanks
Edet: My device is a HTC HD2
This might not fit your problem, but ...
... try to connect your device to a PC/laptop with USB 1.1 - with my Ameo I have many "connection loss" problems with USB 2.0 speed, which occure only on heavy (data) load on syncing.
Disabling USB2.0 is possible on some machines within the BIOS.
If you got no PC/laptop with USB1.1 you can disable the USB 2.0 related driver in the Windows Device Manager (it works for me, in general). Therefor open the device manager and select the "View" menu -> devices by connection (or similar). Now search for the Athena entry attached to the listed USB hardware. Disable the "most-upper" USB controller the Athena is attached to.
OK, the last description might be confusing, but try.
Good luck (as this solution fits to your problem, as I am not sure)
What worked for me
junooni said:
Hello, i'm trying to upgrade my device but facing a weird problem. The WMDC works fine and i can sync my device. When i run the RUU, it analyzes the rom and put the device in bootloader mode....
as soon as the device enters the bootloader, the usb loses the connection and says "cannot recognize the device" or "drivers not found" etc....and the RUU gives the error of "cannot connect to the device. make sure...."
I have tried this with the AthenaUnlocker as well as the AthenaWrapper. I'm currently on SPL 1.1 and want to upgrade to 1.2
Please help!
Click to expand...
Click to collapse
I just spent the weekend trying to unlock my Athena and was having the exact same problem... USB would disconnect, errors 202, 267 . I finally was able to flash the Olipro bootloader, but had a hard time unlocking the radio. My device showed no radio under its properties, so I could not tell what radio version I had. Pressing "phone" would not bring the dialup screen. After so much sweat, I had to put it apart, only to find that the radio board connection to the motherboard was improperly seated, thus was having a bad connection. Once the connection was properly seated, the phone booted up to the emergency call screen, notified that there was no SIM card detected and when I looked in the device properties, the radio version was listed!. I then proceeded to unlock and flash the radio and this time the connection was not lost, the process completed without a glitch.
Hope that helps...