Related
i have a O2 XDA II . it came loaded with 1.66WWE. i wanted to put 1.60. i downloaded it from sourceo2.com
then double clicked the installable. it started the downgrade . it said it will take 30mins & started deleted the rom image.. i then went for lunch & came back in 15mins.. the phones now totally dead.
If i dock it , the screen says USB V1.06
if i remove it the screen says Serial V1.06. I cant hard rest it nor can i soft reset it. i huess cause there no rom image in it.
What do i do.. please help with as many links software as one can..
Please...
ive got 1.72, but when i try that. it says country error.??
can that be resolved.. i dont mind loading 1.72.
the good news is that it seems you still have the boot loader working ... use ER2003 tool to modify the country code of the 1.72 ROM file ... or you can use the xda2nbftool.exe if you like the command line mode
thakns, but i have the 1.72 as an exe file. can i use er2003 to edit the file ??
hyper said:
thakns, but i have the 1.72 as an exe file. can i use er2003 to edit the file ??
Click to expand...
Click to collapse
Unpack the .exe file with winrar/winzip. And you're good to go.
Edit this file: ms_.nbf
managed to unpack it... now when i try to load 1.60 it says model id error & if i try to load 1.72 it says country id error.
what do i change in the ms_.nbf file ????
do i only change this file fields or all three??
i even removed the battery & checked the model ID. on my phone it says PH10B
i changed all the three files to PH10B ..
Now i get Connection Error.....
Now what???
now the error is ERROR 101... connection error.
(i'm loading 1.60)
also is it possible for me to do it via my emory card (i have a MMC32MB & 128MB)
if so, what file do i need to copy & then whats the procedure??
i got 1.03.00 rom on mine. my xda 2 is 2 days old now dunno wht rom to load it up with now. whts the best & safe rom now. i have no apps or nething to back up so its oki. the phone was bought from u.k. and was locked on O2 network. now its unlocked and being used in India. plz advise wht ROM to d/n and use. if possible the d/n link as well. thx
Question?
Why do you want to downgrade your phone? :shock:
For upgrade to 1.72:
1. Download i-mate 1.72 update and xda2nbftool
2. unpack that update to any directory on your harddrive
3. download script from this post to created directory (unpack it too)
4. copy xda2nbftool.exe to that directory
5. run provided script
6. insert XDA2 to cradle and then HimaUpgradeUt.exe
You will i-mate splash screen from i-mate though, but working device.
thanks for all the help. but im yet getting country ID error even after running the process .
this process basically converts the id to O2, in a batch dos mode... right??
then y is the problem yet there.
i wonder... most O2 XDA II come with 1.6 rom version. mine came with 1.66. could that mean its not O2 even though its written O2 on my phone? could it mean its T-Mobile or something??
can someone post a link or software that i need to put onto my MMC card & then use that to install the rom from the card inserted in the phone??
hyper said:
thanks for all the help. but im yet getting country ID error even after running the process .
this process basically converts the id to O2, in a batch dos mode... right??
then y is the problem yet there.
Click to expand...
Click to collapse
So, what's that problem? Can you run it?
Try to run it in command prompt... And if it writes any error, post it here...
Can you access the file system of your XDA2 from ActiveSync -> Explore?
now i managed to get the problem of Country error out of the way , but now im getting the ERROR 101 - Connection Error.
no i cannot browse any files & my active sync does not show connected.
what files do i need to copy paste onto my MMC card so that i can flash it by executing the files with the camera button & the MMC Card inserted??
im dowloading the NTRW & 1.72 NK.nb1 file. do i just copy & paste it on the mmc card & then instert the card into the phone & then press the camera button.. should this do the trick??
this is all that i have tried so far... yet no luck.
my phones originally from malaysia , its an O2 XDA II
i have the following rom with me. my bootloader is V1.06
1. RUU172800WWE_CDL_SKU1
2. XDA_IIupgrade_v16050
3. RUU172104wwe-t-mobile-uk
1. i removed the battery , dcoked the phone, connected the charger to the docking bay at the back...the red light on the phone lights up.... the bootloader screen shows up ina slightly distorted manner.
i then ran all the three roms as it is..without editing anthing. The error i get in all the three times is ERROR 101. CONNECTION ERROR. it tells me to check is usb is connected, charger is connected usb port is conencted & the phone is on. .......... everythings connected but obviously phone can only be in bootloader mode.
2. i put the battery back in dock the phone, the charger is yet connected to the back of the docking bay. .. i try all three installations withour extracting or editing as they are exe files..... now, all the three times i get COUNTRY ID ERROR OR MODEL ID ERROR.
3. when i edit the ones that give me model id error then i get CONNECTION ERROR AGAIN. (this is again with the battery in & charger plugged in)
i downloaded the NTRW & 1.72 NK.nb1 file. but the one that is available on this forum is corrupted. so i cannot extract it.
NTRW ive downloaded seperately. i need the nb1 file now. can someone post a working, no-corrupted image rom image file?
once i get the correct Rom.nb1 file... all i have to do it copy & paste the correct rom.nb1 & ntrw.exe file onto my MMC card & keep the battery in the phone & insert the MMC card & press the Camera button .... is that correct? i'm guessing that this will run the ntrw exe file & load (dump) the Rom.nb1 file onto the phone. is that correct?
please do let me know what else i can try & dowload a newer RUU or something. i think the best way is to SD flash the phone.
i dont even mind flashing it to a PPC2002 version & then upgrading it from there. if thats possible.
As far as the connection between the USB Docking Bay is concerned,...everytim i connect or disconnect the phone, i hear the familiar XP "TING" which shows that some USB thing is connected, but my active sync does not show that the phones connected, i guess that cause it got no rom in it.
Also when i edit the ms_ / NK / Rom files er2003 i get an error everytime i start the software, but i just press IGNORE & continue. i always get ROM successfully written & then the error pops up again but i keep pressing ignore. this works... but whats up with the CONNECTION ERROR. IF ITS NOT CONNECTING TO THE PHONE, HOW DOES IT KNOW THAT THE MODEL ID OR COUNTRY ID WRONG ???
Ok.
If any ROM update can detect your device (as we can see error messages COUNTRY ID ERROR or MODEL ID ERROR), there is hope, you can update your device.
If it's 1.72 ROM (that writes COUNTRY ID ERROR or MODEL ID ERROR), use the solution I send you few posts ago (unpacking, running batch script etc.)
When you updating, keep battery in your device and charger of device connected to cradle! Don't remove anything.
BTW: Don't use RUU172800WWE_CDL_SKU1 update, it just update only part of your device (ExtROM)!
BTW2: Read this: http://wiki.xda-developers.com/wiki/HimalayaRomFlashing
thanks againa beecher. the problem is that once i use the patch & then run it. it does not show me the country id or model id error (for which i thank you) but then it says error connecting.
i have a USB to serial connector. should i try serial connection?? or maybe try it on another computer.
can anyone please tell me how do to a SD flash step by step with the Rom.nb1 file attachment of link.
Hi
Started program - found SX56. Message "Upgrading - will take about 5 minutes"
on pda. Then it said that it had a problem with the USB or COM connection, and
to fix it in device manager. I opened Device Manager, and checked that all the
USB and COM ports were enabled, which they were.
By this time, the unlock software and ActiveSync had stopped running. The pda
was still stuck on the "Upgrading - will take about 5 minutes" screen. Since
the configuration has changed, ActiveSync will no longer recognize the device,
and will not sync with it. Your software will not connect until ActiveSync does.
All that comes up is the "Upgrading - will take about 5 minutes" screen. there
is no other functionality to the system.Hard or soft resets make no difference.
Active Sync doesn't work. The PDA has changed its configuration, so active
Sync doesn't recognize it. When I plug it in, Active Sync sees something, but
can't even tell that it is a pda, and I can't even set up a new connection with
it. let alone use the old connection.
Can anyone help? is there a way i can reinstall active sync or is there another way to fix it? please help
You will need xdatools, sd card, card reader/writer and rom file from kitchen for sd card flashing. Unzip the rom after download, start xdatools on your pc, choose the unzipped rom file as source and the drive letter for your sd card as destination from drop down menu, once the card is programmed insert sd card to phone, push reset while holding power, when prompted you then push the action key which is centre of 4 way rocker buttons. Once flashed push the unscrewed stylus into hole next to headphone socket, push once only, wait one minute push once more, this will work as long as you dont have a problematic version of bootloader on your phone. Good luck.
System is entirely backed up onto SD card.Can't use SD card. Can't use PDA.
PDA is still stuck on "ugrading - will take about 5 minutes". It apparently has
no operating system in ROM. No difference with hard or soft reset - comes back
to same screen, no function in PDA.
HELP PLEASE
I think you misunderstood, a normal backup is no good, you need to program an sd card with a new rom, when this is placed in your xda and soft reset it should reprogram your phone with a new rom. You are correct when you say it has no rom, the method I described should restore your phone to a working machine. You do not need a rom to reprogram using bootloader/sd card method, try it and see.
You will need xdatools, sd card, card reader/writer and rom file from kitchen for sd card flashing.
Click to expand...
Click to collapse
Okay, so can I basically use the newest ROM which also unlock the device too?
You will need to use either xda developers special edition rom to unlock or include the unlock program from the kitchen in a 2002 rom, you can then upgrade to wm2003 if you wish, you cannot unlock under wm2003 so you must use special edition or kitchen rom based on 2002 first.
I am sorry if i keep asking you questions.
I do have the xda special rom, ive tryed using it but it caused the problem i do have right now.
i did download xdatools by jeff. i cannot run them though.
Could you describe step by stef of what i need to do.
i.e. do i need a complete NEW ROM, or can i just transfer the xda special rom to my SD card and then run it to restore my device?
But i guess not, else you wouldnt have explained what i need to do.
Thats the error i get when i try to run xdatools. (I dont understand the install note)
"INSTALLATION
From the source + exe distribution copy OsImageTool.exe and itsutils.dll
to the programme A directory as created by unpacking
jeff's-exe (http://cuba.calyx.nl/~jsummers/XDA/) to a directory in
your "Program Files" directory. Then run 'OsImageTool --register'."
IF you unzip the files you already have both of those files in the folder.
THANKS FOR YOUR HELP
You have to install ActiveSync.
You can get it diretcly from Microsoft for free....
HTH
Stefan
. I was able to locate the NK.nbf file. I ran the XDA OS image tool, to put the OS on the sd card, from the NK file. That apparently succeeded, but it is hard to tell. After loading the OS, when I take out the sd card, then put the sd card back into the sd card reader, it can no longer read the sd card. I can format the sd card again, using my camera, so the sd card is not destroyed.
Wher I put the sd card in the SX56, there is no problem, but there is no success.
Pushing soft reset alone does nothing. Pushing the power button alone does not turn the machine on or off, and does nothing.
Pushing power and soft reset at the same time, gets me the “Wallaby Bootloader V5.15” screen. It first says “wait”, and then says “GSM OK”. It then does nothing else, and doesn’t prompt me to do anything else. If I push the action button, I get “DIAGNOSTICS GPRSA 20324e4”. From there, I can scroll up and down, and test the RAM, Display, battery, USB, etc – all items tested seem OK. There is nowhere to go from here – all it does is test the pieces.
After that, if I push the hard reset (the one that disconnects the battery), the power goes off, and the screen is dark. This is the only way to turn the machine off at the moment. If I push hard reset again, it comes up with a screen full of lines, with two blank holes in it (see attached file). From there, none of the buttons do anything, except hard reset (which turns the machine off again), or soft reset + power, which brings up the bootloader screen again.
have the siemens ROM. It will not work with the cradle, because it cannot find the pda if Activesync can’t make a connection, and loading it onto the SD card does nothing new – both results are exactly the same as with what described above.
any suggestions?
Hi,
I think I have killed my XDA. I was unable to charge my O2 XDA but otherwise it was working ok. I pulled tha back off and changed the battery but still it would not charge. i then dismantled it further and noticed that the small fuse near the connector was open circuted. i thought about bridging the fuse to see if it would work. I haven't done that yet, but when i put it back together nothing works at all. The screen is completely blank and when i push any of the resets nothing happens at all. This has only happened since dismantling. I have sinced checked all the connectors. Everything looks ok but still i get no response.
I have a bit of experience with electronic repairs but can't work out what has happened here.
Any help would be appreciated. Has anyone else had a simmilar problem?
Dale.
You have to hard reset. I have this problem. I click hard reset. Now Xda is working.
I have similar problem, or even worse.
I have a dead XDA. My boss gave it to me to fix it last wek. When i try to hard reset. There's a colourful image on my XDA1 that said wallaby bootloader V.522.
There's a quite big font on the left down the screen that says "WAIT"
Then there's a message GSM ERROR.
Then my Xda1 goes dead, again.
What should i do ?
You could try this:
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Stefan
Thanks, im working on it. But the link to the both RSU are broken.
I need RSU for PW10A. And how to make ROM file ? I try to cook from the http://www.romkitchen.de/WM2003/form.php
Thanks a ot
Links are working. For downloading check this site:
http://wiki.xda-developers.com/index.php?pagename=BA_FTP_Site
Stefan
There's something supid about me, indeed.
when i flashROM via Sd card ... here is what i did :
Cook the ROM then name it as Nk.nb1 file
Run osimagetool
Select Nk.nb1 from the Source drop down menu.
Select SD card (disk drive) from Destination the drop down menu.
Select Copy to start writing process and the tool should start writing to the card.
When XDATools has finished writing the image (no Infomessage) put the SD-card into the device
Soft reset the XDA, but the XDA1 still hang and the SD card inside is not recognized (the screen is frozen at white display and the keyboard icon on the right bottom)
Hold the power button and soft reset.
The display shows the bootloader menu V5.22 and then stops at GSM error message
Press the left upright button (contacts button). Theres menu that says
flash tools
===========
ce rom to SD
boot to SD
ce + boot to SD
gsm rom to SD
ce = gsm to SD
I chose one of the options, then ...VOILA !! my SD card is formatted... LoL
Need yout advis... where I went wrong.
Thx
What for SD-Card writer are you using? Looks like you have problems writing the ROM-Image to your card. Otherwise it should detect the ROM for downloading to your device by itself. You can confirm this by entering bootloader and backing up your existing ROM to SD-Card. Then reenter bootloader, now you should be able to flash Yor Rom....
STefan
Hi,
I have an XDA O2 (Wallaby) which I got from a friend of mine who used it without a problem in its life and now I am stuck with a flashing O2 XDA.
Let me try to best describe my problem.
I had copied some of my excel files onto the O2 and then I had a distinct feeling that it had gotten to be much much slower.I am not too sure if this is the cause.
I was not using it as a phone but one day I slipped in my SIM card so as to surf the net and it just would not connect via GPRS and after that it had become very slow hanging every once in a while so I did a soft reset but it still was slow and the GPRS would not connect neither did it detect my phone service provider.I used to surf prevously through GPRS without any problems.
Then I did a hard reset and it just wouldnt work after that it would start with the blue O2 screen and begin to flash on and off with a blank screen with a small keyboard icon in the lower right hand corner presumably the affected excel file....I think my XDA has a virus now please help me out from here.
I tried doing a hard rest and I depressed the reset button on the RHS side that's it(smaller hole bigger one for soft reset) Once I press down with the smaller end of the stylus I press it again then the blue screen with the O2 logo comes to life it stays on for sometime and then a "tink" noise comes and the busy sign comes as if it has just opened an application ..a blue small band on the top most corner and a small keyboard icon on the lower rhs hand of the screen then the screen begins to flash ten seconds apart for quite some time...infact that all it does before shutting down and restarting all over again.
Is there any other way to do a hard reset.What is the right way?? as on one of the forums said that I should depress the power button and the soft reset button at the same time for about 5 sec I tried the hard and something called the WALLABY Bootloader V5.15 came on the screen with the message 'WAIT' after a couple of nail biting seconds I got an error saying GSM ERROR the screen was a clourful white red green and blue strips....what happened??
Then I proceeded to depress the soft reset button it restarted with the usual error of a program being opened and the screen flashing..
Hope to get a reply from this forum.
Take care
Ciao
Al
flashing screen
almaal have you tried flashing with a sd card? the GSM error indicates that the radio unit is corrupt. Have you attempted to upgrade the rom? If u have was it programme A or Programme B? by the sounds of things you have. Does the power light light up? let me know the answers to this and i might be able to help
have you tried flashing with a sd card? the GSM error indicates that the radio unit is corrupt. Have you attempted to upgrade the rom? If u have was it programme A or Programme B? by the sounds of things you have. Does the power light light up? let me know the answers to this and i might be able to help
Hi,
1st off thanks for your reply....
I have downloaded Programme A to upgrade my rom but cant seem to get it loaded onto the SD card. I unzipped osimage.exe and tried to store it from my PC to SD card but cant seem to do it....furthermore I was advised by friends out here not to be a braveheart and venture to kill my XDA but still I'd like to try...you see I'm not to conservant with the software bit and I'm only a end user...
Could you give me a step by step guidance to get the software loaded to the SD card via a card reader and then flashing the rom..
Hope to hear from you....
Alvin
flashing from sd card
Firstly make sure u have winzip winrar or some other compression software on the computer then right click on the programme A exe file and click open with whatever compression program u have i use winrar so i will say open with winrar. You now need to extract all files into a folder.
Once you have done that open up OSimagetool and on source browse for the folder u just extracted the programme A to and look for nk.nbf,you will need to tell it to look for nbf files and not nb1 files , which is the default and select it,it is in the english folder. In the destination u need to select your sd card which should be in a card reader as u cant program it directly to the XDA or via the memory card, once you have done this click copy. when that is finished you need to take the card and place it in the xda and do a cold reset . A screen will appear saying SD Download click the action key on the pad to commence flashing. after a few minutes it will inform you that it has finished. remove the sd card and Cold boot again then once the wallaby has rebooted back to your bootloader screen soft reset it,ignore the gsm error now cross your fingers while you wait to see if it reboots. If it reboots ok set up activesync again and run the radio upgrade. By the Way any info on the sd card should be saved before attempting this as it will be overwritten by the osimage tool. Also only the xda can read the card , the pc will say it needs formatting Good luck
Any Luck
Did you have any luck reflashing with a new rom almaal?
I have followed the procedure. The system rebooted and I got the GSM error which I ignored and continued the process. The system rebooted properly i.e I get to see the start menu and the calendar, but the device does not get detected by activesync. Another thing to note is that the system has become terribly slow. And although the backlight is switched to on it the device keeps on flashing. What do I do now?
almaal said:
I get to see the start menu and the calendar, but the device does not get detected by activesync. Another thing to note is that the system has become terribly slow.
Click to expand...
Click to collapse
That´s quite normal on a device with the gsm error.....
Stefan
wallaby xda flashing
format the sd card then and copy the radio upgrade over to the card. not as an exe file almaal, right click it again then extract files and copy the files over , if u have a cab file including then just use file explorer on the xda to navigate to the storage card and click on it and it will install. If not then click on the rsupgrade.exe. Hope you have more luck with this than i have i had . Good luck
wallaby xda flashing
format the sd card then and copy the radio upgrade over to the card. not as an exe file almaal, right click it again then extract files and copy the files over , if u have a cab file including then just use file explorer on the xda to navigate to the storage card and click on it and it will install. If not then click on the rsupgrade.exe. Hope you have more luck with this than i have i had . Good luck
Not charging I think
Hi I dont know what to make of it but now my wallaby came to life with the rom that I flashed but it seems to have gone crazy. Let me best try and explain.
1) The green charge light does not come on when I put it onto the cradle or plug it directly for a charge.
2) It does not make any sound, no beeps no nothing....but when an mp3 is put on it plays
3)The back light does not come on which is enabled but does not work I have to work with a dark screen...is there a brightness control which can be adjusted...its like its on power save mode or something..
Now its back flashing the O2 screen again its become terribly slow and unstable and I have to do a constant reset. How do I know which is my ROM to flash, I've flashed the R.30.07 ENG Rogers (4700 kB available) from http://www.romkitchen.de/WM2003/form.php.
I somehow feel that my O2 is not charging
Can you make any sense of this ..
Alvin
Hi
And another thing is that I trird copying the radio upgrade over to the card and then clicking on rsupgrade.exe. The upgrade fails at 1% giving an error as follows:
Flash Failed!
Press ok to restart your device.
What could be the problem? and how can I fix it?
Thanks
See http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
Regards,
Neil.
Flash Failed
Neilius you have obviously not been through this process, no offence, but as i have tried to ask with a few posts on here it seems when the radio upgrade fails the wallaby refuses to charge. Which i think is the reason the radio upgrade always fails at 1%. Unfortunately nobodys knows or is even interested in finding out why
Flash Failed
Neilius you have obviously not been through this process, no offence, but as i have tried to ask with a few posts on here it seems when the radio upgrade fails the wallaby refuses to charge. Which i think is the reason the radio upgrade always fails at 1%. Unfortunately nobodys knows or is even interested in finding out why
No Charge no back light
Hi,
I have flkashed my rom but I cant get the RSU upgrade done.Now I have a running O2 with no backlight and it does not charge....where do I go from here....please reply my life is a meess without my O2 is it time for a change...howz the O2 mini or the imate JAmin fed up with this GSM error.
Alvin
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
hgalanos said:
Hey guys,
I have a HD2 with the following stats:
WM: 6.5
Manilla: 2.5.19211619.0
ROM: 1.66.405.2
Radio: 2.06.51.07
My phone works perfectly. Out of nowhere, without having installed any new apps, without a soft reset, nothing at all.
When I click on any quicklink, or any app under the start menu, I get the following error:
"The file ?????? cannot be opened. Either it is not signed with a trusted certificate, or one of it's components cannot be found. If the problem persists try reinstalling or restorig the file"
??????? = the app or program I am trying to run.
This stops sense from loading. Only WM6.5 will run - without HTC sense.
I get this error for no reason. I have not installed any new software, I have not done a soft reset, nothing. Was using the phone all day and it was perfect. Then bang, I got this.
It has happened before and a hardware reset fixed it.
Does anyone know what on earth is causing it? I have SKcert and Cert2015 installed as I am using some custom icons. Do you think this might be causing it?
I do not want to have to do a hard reset every could of weeks.
This is a joke. Any help is greatly appreciated. Thanks.
Click to expand...
Click to collapse
Could be something to do with your SD card....
Have you got a link to something installed on your internal memory you can test...
I had somekind of sense failure once when I took the sd card while the phone was on and no matter what I tried I couldnt get it running....
I might be way off but Its all I can think of Im afraid.....
Re-install framework 3.5...
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
acerulzall said:
Had the same issue. first on a kaiser, and recently on my hd2....... what i did was reinstall the .net framework, ie first un install, then re install, and soft reset..... workd perfect.
i see this is an old post, but might come in handy any way.
Click to expand...
Click to collapse
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
uta77 said:
I have the same problem. can not reinstall anything - "not signed" any other solutions??
Regarding sdcard - it do the same with non stock programs, which are running on internal storage, when there is no SD card inside.
It happened after unsuccessful run of android from SD card
any solutions??
Click to expand...
Click to collapse
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
Could you please explain to me what each of these policies values do, or maybe point me to the thread where I could find out?
I am able to install apps ok, but every time I install a cab, it gives me the
"This application is not from a certified/trusted source, yada yada yada"
message, and I have to choose 'yes' to confirm it and go ahead with the install, not a huge deal but it'd be nice to get around it if some of these will do it.
And when I reboot, especially from Android to WM, alot of the time I get an error from gAlarmReload.exe , even though it doesn't affect gAlarm at all, the alarms still work fine. I just wanna make the s/w security as lax as possible on my phone.
I guess I'm already app unlocked, because I can make registry changes no problem. I have installed sdkcerts and netcf3.5, and have done the reg change to ensure the phone is using 3.5 and not 2.whatever_it_is, among many other reg changes.
But I don't like to go changing reg values if I don't understand what they do, because I'm one of those set-everything-up-manually types, I don't like the backup prog's and I've done a bunch of tweaks already so a HR would kill me...
Thanks for reading my unneccessarily long post, I have Asperger's so I tend to overexplain everything to death, but I guess at least I'm thorough
Thanks, worked perfect on my wife's HD2, as she needs to run stock rom 3.14.
This saved me heaps of figuring out how to do this.
Once again,thanks to all those who try and help on this forum.
Where would be all be without such great contributions !
Thank you.
uta77 said:
I found the solution Special THANKS to JZ SmartMort
Following simple steps:
1) Download following file: http://www.internet-tools.co.uk/blog/wp-content/uploads/2008/11/sda_unlock.zip
From archive we need only SDA_ApplicationUnlock.exe
It allows Registry to be edited from PC.
Run it with working Activesync connection
2) Download Mobile Registry Editor: http://www.zipsoft.ru/catalog/mobile_registry_editor-v1_11.html
Also run with working Activesync connection
3) and modify the following keys to the values listed.
("HKLM","Security\Policies\Policies","0000101b","1 ")
("HKLM","Security\Policies\Policies","00001005","4 0")
("HKLM","Security\Policies\Policies","0000101a","1 ")
("HKLM","Security\Policies\Policies","00001001","1 ")
("HKLM","Security\Policies\Policies","00001017","2 4")
It perfectly worked with HD2, but I guess it should work with all WM devices.
FYI, here are some other useful software packages that relax the security.
http://forum.xda-developers.com/showthread.php?t=285344
http://www.internet-tools.co.uk/blog...tegory/mobile/
http://www.internet-tools.co.uk/blog...sda_unlock.zip
http://sedacka.saman-cz.com/ppc/inde...unlocking.html
http://forum.xda-developers.com/showthread.php?t=338433 --- the first file in this article.
4) Restart
P.S. Special THANKS to JZ SmartMort
Click to expand...
Click to collapse
after using sec config manager...i cannot sync with outlook by USB also wifi account exhange not working any help?
set back the original registry values
i have same problem with certification. And i have done with the registry values. but after a week, my phone goes slowly than ever.
I want change my registry value to normal. if any, would you please help me to write the original values of registry? i am using HTC touch pro 2 Rod 400 from US Cellular. Thank you.