I dropped my xda today...sh*t
antenna first to the ground, good thing it did not snap out.
But the antenna is misaligned already.
But the bad thing is the stylus was stucked inside, as i was trying to
pull it slowly out of the stylus hole it snapped off. Sh*t again.
I'll try to dismantle it today to get the stylus out and re - align
the antenna.
If ever i f*cked :shock: up the whole thing, where can i bring my unit here in the philippines? any inputs? tnx guys! :? [/quote][/b]
if it is an xda II you can contact itech at +63 27226611. if XDA, i forgot the company but it is somewhere along the South Super hiway...ask itech nalang malamang they know.
Tnx man, i was able to find one of the suppliers of XDA1
here in the Philippines, its CDC (Computer Devices Corporation)
located at south superhighway, bangkal makati city.
I was able to buy one stylus for P550.00 ($10.00).
Tnx! :lol:
Hi All,
I am looking for a Qtek 9090 housing. Anyone know where can i
get it online from ?
not online, but if its still in warrenty try calling your local bratch of HTC. They offer a 'chasis replacement service' for 40 quid in the uk!!
Hi there, you mention that HTC has local branches in the UK that change chassis...would you have any contact details? Thanks
Go to http://www.htceurope.com/ and register your phone for case booking. Make up some story about a fake problem with the phone and you'll see a cosmetic refurb (or something along those lines) for 39.95. someone will get in touch with you can get it picked up and sent to HTC in milton keynes. And when it comes back your have your blue angel looking brand new!
But I dont know where you could buy the case and fit it yourself. ALSO RESTORE THE FACTORY ROM OR YOU COULD BE IN SOME SERIOUS LEGAL ****!!!
hi,
I am in singapore and over here they sell O2 XDAIIs but, i kinda like the
Qtek 9090 housing ....
hey guys, any idea ?
and today??
We are now in 2007. Does anyone knows were to get the Qtek 9090 back housing (battery holder)??
I don´t know exactly which part you mean. Put have a look here: http://www.apexlaptops.co.uk/Blue Angel.htm
I mean the back of the BA... the big blak plastic were the battery fits, were is the hole for the camera and were the stylus fits...
I don't mind if it is used.. just that is in one piece..
Ok, so as the title suggests, i'm looking at replacing the housing of my vario (cause its scratched to hell - keys in pockets, and the odd drop )
After looking at http://cnn.cn/shop/8525-blacksilver-full-housing-p-198.html was wondering whether these were suitable for straight swap? as obviously the keypads are different between the herm100/200/300 but i'd keep the original in as its in good condition, and wouldnt mean i'd need to swap the pcb underneath either?
Or am I barking up the completely wrong tree so to speak?
Any help appreciated...especially for you Vario owners who have changed their housings...any problems you came across etc.
Cheers!
bump surely someone must have done this already?? all these reads, and no replies
SEARCH THE FORUMS BEFORE POSTING THREADS
kthxbye =p
i've already searched....n yeh it mentions swapping with an orange 3100 housing...but thats something i'd haveto find on ebay etc...doesnt mention the 8525 housing on cnn..... so was wondering if the keypad fits or not, as the front faceplate is scratched to hell so would need to swap the whole casing...not just the middle/rear panels.
Try this: http://cgi.ebay.co.uk/OEM-Housing-f...oryZ3728QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Cheers for the link Paul. That listing seems to claim that you can replace a vario with that housing, so might aswell just bite the bullet and go for it I'll probably look at getting it from CNN still, as they will work out slightly cheaper (~£32 compared to ~£45)
marcparker said:
replace a vario with that housing
Click to expand...
Click to collapse
Vario II to be more precise. The Vario is a HTC Wizard.
Any success with replacing? Is it hard to do? I have some scratches myself, and would like to change the housing. Have a TYTN
I havnt had chance to order the new housing yet, as i was skint until payday I'm going to hopefully get it ordered within the next couple of days.... I'll keep you posted on how it goes!
Still no one with experiences?
On this site there is a GPS antena available for TyTn... can we then enable GPS on the TyTn??
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
I've seen an HTC Hermes Case on this site:
http://www.cellphonepartszone.com/Products.asp?shopxpbe_id=64&id=281
but it's not completely clear to me on how to order and pay... (i'm Italian)
Hope this will be useful and you'll understand how to order the case...
Still no one with experiences on changing the housing?
Sei semplicemente un grande..la cover originale è impossibile da trovare!!
However no succesfully experience to swap the housing because in order to be able to change them (Cingular/HTC 8525 and also from Orange but i can't remember the name) with a TyTN, because the internal keypad membrane of the buttons at the top of the phone are (hope for now) impossible to find anywhere. I'm still looking for..
Churchill said:
On this site there is a GPS antena available for TyTn... can we then enable GPS on the TyTn??
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
Click to expand...
Click to collapse
I think enabling GPS is a little more complex than that - there were some required connections on the chipset that are not connected - try searching this forum...
Before post remember the topic of the thread: HOUSING
not gps
After I had changed the housing the screen doesn´t change into landscape mode
Hi!
After I had changed the housing the landscape mode isn´t activate itself while openning the keyboard. It did only once. It seems like the problem is of physical matter but I checket out all again and it seems to be all as it was. I don´t have another complains about functionality.
For those who wants to change the housing I have to say that that takes alot of time. And before you will waist money for a new housing make the following steps:
1. Look a this one verry carefully and be sure you have all tools you need.
ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
2. Think that you will need some stuff that you will put between new housing and touchscreen. (I took the old one but it isn´t a good idea).
3. You will need some glue to glue the old parts to the new housing (obviously the housing is more than just this plastic case).
If somone could give me an good advice related to the screenmode while opening I will aprecciate that.
ecor said:
Hi!
After I had changed the housing the landscape mode isn´t activate itself while openning the keyboard. It did only once. It seems like the problem is of physical matter but I checket out all again and it seems to be all as it was. I don´t have another complains about functionality.
For those who wants to change the housing I have to say that that takes alot of time. And before you will waist money for a new housing make the following steps:
1. Look a this one verry carefully and be sure you have all tools you need.
ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
2. Think that you will need some stuff that you will put between new housing and touchscreen. (I took the old one but it isn´t a good idea).
3. You will need some glue to glue the old parts to the new housing (obviously the housing is more than just this plastic case).
If somone could give me an good advice related to the screenmode while opening I will aprecciate that.
Click to expand...
Click to collapse
Your device does not rotate anymore because you have not moved the magnet from the old casing to the new one. The magnet operates the rotate switch. See here:
http://forum.xda-developers.com/showthread.php?p=2686388
Mike
Oh and you gave a link to the Wizard Manual, but you can get one for the Hermes here www.mikechannon.net
Hello , I have a p4350 wing.
My problem is i broke up the one of the thin plastic piece that holds the back cover.(just near the stylus)
So the cover gets out very very easily..
My only chance is to change the inside housing i think.. which the part seen on the attachment picture upper right.
I couldnt find any seller on the net that sells this part seperately.. So.. if somebody on this forum has a broken 4350 or bought such kit and doesnt need that part..
I will be glad to buy it..
))
Hello guys sorry but does anyone know where to buy fascia for niki 100 3g version cuz i dont know where to get it there is no in my country (bosnia) i searched ebay also and cant find any.
I am looking for whole fascia or just back pannel cuz i lost my backpanel (battery cover) alcohol does bad things i really like this phone it would be shame to dispose it just cuz of peace of plastic and it looks ugly this way.
Thx wizzardz!
Ebay
Hi you can buy it of ebay search for the touch dual back cover.. or full housing.... they are a little expensive...