Orange M3100 "Windows Mobile" screen freeze - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

Hello. I was try to upgrade my M3100 with firmware:
me_dt_wwe_1182553_106_10303_ship.zip downloadable at http://www.romupdate.ru/
After succesfully update procedure is M3100 freezing after boot at "Windows Mobile" screen.
I was try all possibilty wrote at http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems with no success...
Now I have:
Bootloader:
HERM100
IPL-1.00
HERM100
SPL-1.04
and after start first screen:
M 05
S 04
B 06
No GSM
D 1.18
I try (several times) all instructions wrote at:
http://forum.xda-developers.com/showthread.php?t=280733
all is working, but 13 is never working. Program is "checking information" without any progress...
I also try update thru microSD (HERMIMG.nbh) but progress is finishing on "Checking" screen
Image is from Orange image: HER_ORRO_123702_1060400_WWE_SHIP.exe
Is any possibilty back to live my M3100 ? Thx everybody...

i have the same problem

please someone help

Maybe this page will help
http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick

Related

M3100 unsucessfull unlocking - please help

Hi
I tried to unlock my orange m3100 (swiss) SPL 1.04. When I run the MaUpgrade I get the ERROR message 120 Country ID mismatch and the program quite / radio rom version remains at 1.06.00.00.
Please help me - thanks
Surely your running the MaUpgrade_noID.exe program??
S.K.
Which bootloader do you have?
[edit]Sorry-I just saw you listed 1.04 in your original post[/edit]
Run the software when your fone is under the tri-color screen mode, rather than wm 5.0

Bad TyTn/Hermes update - Help needed

Hello forum,
Two days ago I bought my first PDA, an HTC Hermes Vodafone, from ebay Uk. Because I'm italian I have tried to install the italian ROM ( ITA 1.18.258.2_1-17-07_SPL1.04_Radio1.27 ) . When I launched the update software, everything was seems to be fine..but at ~10% of upgrade the pda software sent to me an error 262. I followed the recovery procedure, but after did this, when the PDA try to boot up, it stay freeze at the HTC logo (before the procedure there was a vodafone logo) . If I boot the device holding OK+Power ON I can see the following lines:
HERM200
IPL-1.01
HERM200
SPL-1.04
Please, help me to restore this faboulous pda..I need it works again, also in vodafone rom versione doesn't matter, I wanna my pda back..
i have the same problem
I tried to run the Mtty.exe software,
this is what I obtain:
USB>
USB>task 32
Level = FF
USB>info 2
HTCSVODAP001©®±HTCEUSB>
help us, please guys
PS: If I digit lnbs SPL-1.01.nbs 50020000 I obtain the following result:
Command Error!
Have you read through the unbricking thread? http://forum.xda-developers.com/showthread.php?t=286755
Yes thank you, but I don't understand how to put the supercid on it, so I can proceed to unbrick the pda..
so the question now is, How can I put my phone in supercid mode if I can't copy the file to the phone?
i have the same problem
USB>
USB>task 32
Level = FF
in all xda-developers not have solution for this, y have read all and i habe searh and nothing found for this error
Problem solved installing the following rom
RUU_Hermes_VF_IT_2.07.165.1_6275_1.32.00.00_108_Test.exe
not one, but two times..cause the first time it was crashed with error 294, then, without unplugging the pda, simply restart the RUU_Hermes_VF_IT_2.07.165.1_6275_1.32.00.00_108_Test.exe .
This worked for me
bye
how to download this rom? y have search in brown toolbar up and:
Sorry - no matches. Please try some different terms.
I HAVE TEST 20 TERMS DIFERENT
Hi mate,
you can find all the roms links at this link
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Have fun!
Byee
Ma Herm200 Stops At Windows Mobile Logo
i triedto use pof's program (HTC_Hermes_SIM_CID_Unlock_v3a) and now apeears first the htc logo and under it appears:
(HTC LOGO)
M 05 No GMS
S 04
B 05 D 1.18
then appears vodafone and stops at windows mobile logo.
what shoud i do?

Herm100 Problem

I have SPV M3100,
Always update error [262],
And now it stuck on Boot loader (3 color screen)
Actually i want to upgrade this but i could not, i made reset and all procedure but same,
And now i cant flash this always error [262] and showing me boot loader only,
HERM100
IPL-1.0.1
HEMR
SPL-1.40.01ipro
Please help me,
I would suggest reading this http://forum.xda-developers.com/showthread.php?t=296722
It was amazing help for me.

[Q] HARD SPL dont work

hi to all,
trying to hard-SPL my htc-hermes (also in V9) doesnt work.
HARD-SPL7 fails getting device informations
and V9 returns an image corruption after loading bar at 100%
....boot loader screen displays:
HERM200
IPL-1.04
HERM200
SPL-2.03
Can you kindly help me?
device is connected via usb to my notebook and Vista with the upgraded drivers for HTC sync
dARN
DARN i got the same problemzzz

HTC HERm300 Bootloader ONly WTF!!!

Hi,
I have One HTC HERM300 ...
While Update i get Error 262 and now stuck in Bootloader mode with Following INFO
HERM300
IPL-1.04
HERM300
SPL-1.40.0lipro
How can Revive this Fone ?
Tried Hard SPL V7 not work
yousaf22us said:
Hi,
I have One HTC HERM300 ...
While Update i get Error 262 and now stuck in Bootloader mode with Following INFO
HERM300
IPL-1.04
HERM300
SPL-1.40.0lipro
How can Revive this Fone ?
Tried Hard SPL V7 not work
Click to expand...
Click to collapse
to solve problem on your phone, had better look a guide on WIKI
try this link too..http://forum.xda-developers.com/showthread.php?p=5146955 seem it has same problem..

Categories

Resources