Related
ActiveSync icon never turn green,cause the phone seems locked,ask me to insert correct usim card.can only dial emergency number
Anyone can help?
jarodcn said:
ActiveSync icon never turn green,cause the phone seems locked,ask me to insert correct usim card.can only dial emergency number
Click to expand...
Click to collapse
Just press 'cancel' and you will get the today screen. ActiveSync icon should turn green by the way even if you are on the phone screen. Make sure the device is connected to USB port.
I have updated the wiki with instructions on how to downgrade to bootloader 1.04, here's the wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_Howto_Bootloader104
there is no "cancel" to press
i success downgrade to bl 1.04,but after flash the MaUpgradeUt_noID,nothing happen,never ask me unlocking code,after few seconds return to the screen i said before(invaild sim card,turn off the power,insert a correct simcard,u can only dial emergency no.)
finally i had reset the phone,phone ask me the unlock code,i input 22051978
but not correct
jarodcn said:
finally i had reset the phone,phone ask me the unlock code,i input 22051978
but not correct
Click to expand...
Click to collapse
make sure you have bootloader 1.04 and the patched radio rom was flashed correctly. Your device must show radio version 1.13.00.00 on Settings -> System -> Device Information -> Version.
i hv the same problem, it is not a sim lock, it is a usim lock, it claims a correct usim, and it ban all function including basic pda function even u hvnt insert any sim card
ps. bootloader 1.04, radio 1.13, sim unlcoked by the unlocker, it should be a usim lock for x01ht firmware ONLY, because i tried to flash to other ver, they hvnt this problem, but i dont want to see dopod or docomo logo in a softbank phone..........
http://user.iriverhk.com/9//x01ht.jpg
please help
I can't read japanese, but I think this may help you:
http://forum.xda-developers.com/showpost.php?p=1048193&postcount=116
pof said:
I can't read japanese, but I think this may help you:
http://forum.xda-developers.com/showpost.php?p=1048193&postcount=116
Click to expand...
Click to collapse
but how to cook it into ext_rom or rom to make it still available after hard reset? thx
benkywong said:
but how to cook it into ext_rom or rom to make it still available after hard reset? thx
Click to expand...
Click to collapse
Unhide and unlock your extrom and put the cab there if your rom allows extrom-unlocking, it won't be executed after hard reset unless it is signed, but you can manually unhide the extrom again and run it.... or simply put it on your SD card
pof said:
Unhide and unlock your extrom and put the cab there if your rom allows extrom-unlocking, it won't be executed after hard reset unless it is signed, but you can manually unhide the extrom again and run it.... or simply put it on your SD card
Click to expand...
Click to collapse
sorry but i really want to know that how to make it auto run after hard reset, i hv make it in ext rom and edited config.txt, it can be autorun but the cab file need to ask for permission (i must answer yes or no), but other cab file dont need, how to make SB_USIM.cab dont ask for permission so that it can autorun by config.txt?
thx
must be signed with a key HTC won't give u
You can pay $400 to Verising and sign it
pof said:
must be signed with a key HTC won't give u
You can pay $400 to Verising and sign it
Click to expand...
Click to collapse
then is there any command that let the SB_USIM.exe (ppc) file copy to the ppc start up folder?
pof said:
I can't read japanese, but I think this may help you:
http://forum.xda-developers.com/showpost.php?p=1048193&postcount=116
Click to expand...
Click to collapse
this seems to work.. there's a blue icon at the bottom left screen and when I tap on it it shows version 0.0.1 and exit.. after the USIM screen closes I find that I can view the phone book on the SIM card.. I havent tried making calls yet since the SIM card only works in countries with GSM coverage (specifically Maxis Malaysia) and I'm in Japan.. but does that mean I can use this SIM card? and if I close this software (I like to use the settings>memory>running programs>close all programs at times) will the USIM screen come back on?
EDIT: the program is not listed in the running programs list.. problem solved I guess.. cheers all
Read comment #299 here for a better solution:
http://forum.xda-developers.com/showthread.php?t=282073&p=1054702
pof:
I've read the comment there, but didn't understand what to do.. can you write down a small howto for newbies like me to understand? cheers
1) Hard rest
2) Soft reset before the extrom installs
3) Unhide the extrom
4) install all cabs except PT_SIMlock_Empty.CAB
thanks for the quick reply..
since this process will delete all my contacts and mails, do you know any software I can use to backup all these data?
EDIT:
nevermind that.. I just copied pim.vol and did the hard reset thing.. I'm not sure if I did anything wrong but it didnt seem to work.. I soft reset when WM wanted to install the auto update thing and I manually installed all .cab file that was in the ExtROM folder (the ones that were already in the phone) except for PT_SIMLock_Empty.cab.. but when I restarted the phone and inserted a locked SIM card, the same screen came up. Did I do something wrong?
bump.. coz it went into the 2nd page..
pof said:
Read comment #299 here for a better solution:
http://forum.xda-developers.com/showthread.php?t=282073&p=1054702
Click to expand...
Click to collapse
no use, the Usim lock should in the rom, if u just soft reset when x01ht installing ext_rom, the Usim lock still here
According to the problem of "Invalid Vendor ID" when trying to restore the original rom that i mentioned the topic 'XDA Live report'. I really wanna know to sovle this problem.I did update rom 'RUU_HERMES_HTC_WWE_1[1].35.255.2_1.35.255.102_1.08.00.10_SHIP.EXE' afte that i updated my dopod 838 pro to Rom ' XDA Live' for a few day. I want to use the original rom 'HER_DopodAsia_1237074_1060010_WWE_SHIP.exe' then i updated my hermes to the HER_DopodAsia_1237074_1060010_WWE_SHIP.exe.Then reset my dopod 838 pro. I saw the first screen 'No gsm' and stop everything at the welcome screen. So i tried to fix the problem as the wiki 's suggestion by pressing button 'OK' and Power together with reset by stylus for enter the tri colour for updating but the big problem is that my dopod 838 pro can't connect to computer. The icon 'synconize' at the task bar shown gray colour not green colour !!!!
What should i do now ? Pls Help me !!!
Does your device show USB at the bottom of the tri-colored screen when connected to your PC?
It shown USB at the bottom!!
can your phone boot? not into bootloader mode but into the normal mode
can't boot normally..stop at the welcome screen
I had the same problem when I had the Cingular 2.06 ROM and wanted to put back again SA 1.35 ROM...for the exception I was stacked in Bootloader. I get the "Invalid vendor" error and instead of ran the upgrade again I disconnected my device...and from that moment stacked in bootloader and grey icon in windows...But I managed to unbrick my device by putting on again the ROM I have before I have tried to upgrade...so I had to put on again the Cingular 2.06 ROM and it works for me (or I was just lucky)...but believe me...it was 3 hours of fear & suffer...
Hope you will be able to unbrick your device...
Regards,
Primoz
Is there any rom which can unlock this error? There is a lot of rom at wiki.I don't know the previous rom that i had before ....
...I assume you have the original ROM on your device...or you have made some other ROM updates before?...if you have a Cingular put the latest Cingular ROM...if you have a HTC (original) device put the last HTC ROM...and so on...I hope this could help you...
Regards,
Primoz
Pc78 said:
...I assume you have the original ROM on your device...or you have made some other ROM updates before?...if you have a Cingular put the latest Cingular ROM...if you have a HTC (original) device put the last HTC ROM...and so on...I hope this could help you...
Regards,
Primoz
Click to expand...
Click to collapse
How baout the coneection between my dopod 838 pro and computre? Because it shown gray icon instead green icon ? How to connect ?
jcute said:
How baout the coneection between my dopod 838 pro and computre? Because it shown gray icon instead green icon ? How to connect ?
Click to expand...
Click to collapse
It doesn`t metter...in my case it was grey too...but I managed to upgrade...just try...I think you cannot be in worst situation you are now...give it a tray and report...I hope it work!
Regards,
Primoz
Pc78 said:
It doesn`t metter...in my case it was grey too...but I managed to upgrade...just try...I think you cannot be in worst situation you are now...give it a tray and report...I hope it work!
Regards,
Primoz
Click to expand...
Click to collapse
I did update rom "HER_DopodAsia_1237074_1060010_WWE_SHIP.exe" ( The original rom' but still got the same problem !!!
jcute said:
I did update rom "HER_DopodAsia_1237074_1060010_WWE_SHIP.exe" ( The original rom' but still got the same problem !!!
Click to expand...
Click to collapse
did the install complete successfully?
are you able to mtty into the device?
jeRrRKKKK said:
did the install complete successfully?
are you able to mtty into the device?
Click to expand...
Click to collapse
not complete!!! i did mtty to my device. There is no error.Should i save after finish ?
This is what i did...
Type the following commands (do not copy paste!!!)
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
After set 1e 0....what should i do next ?
Hmmm password?!...I think you should type info 2...not password...?!
Regards,
Primoz
Pc78 said:
Hmmm password?!...I think you should type info 2...not password...?!
Regards,
Primoz
Click to expand...
Click to collapse
can you give me the complete command ?
jcute said:
can you give me the complete command ?
Click to expand...
Click to collapse
Connect to the PC and run mtty.exe and you get this
USB>
type: task 32
then type: info 2
before running mtty.exe uncheck "Allow USB connection" in the connection settings of Activesync...
When you will try to update don`t forget to check again "Allow USB connection"!
Regards,
Primoz
p.s. I think you should move to the sticky theme of dead hermes...
Pc78 said:
Connect to the PC and run mtty.exe and you get this
USB>
type: task 32
then type: info 2
before running mtty.exe uncheck "Allow USB connection" in the connection settings of Activesync...
When you will try to update don`t forget to check again "Allow USB connection"!
Regards,
Primoz
p.s. I think you should move to the sticky theme of dead hermes...
Click to expand...
Click to collapse
Pls take a look !
jcute said:
Pls take a look !
Click to expand...
Click to collapse
Mhmmm...try firt to put a space in front of commands like this-
USB> task 32
USB> info 2
...
regards,
Primoz
what is your bootloader version?
if you can mtty in, simply load the os again...
lnb OS.nb
then let it boot in first
later then decide, is radio working? is OS working?
Hi everyone.
im a beginner for PDA's..i have read your post about prophet then i decided to upgrade to WM6 PDAVIET.
While i connect pda and execute software i had mistake and turn off phone.i did turn on phone after cancelled process
it just showing operator logo and IPL SPL GSM OS infos..
and i have run again Upgrade_ROM.exe than its stopping " Clearing the existing Extension ROM " ..
What did i do PLS i wait your helps
goto bootloader and flash again
follow the direction on the link to enter bootloader mode
http://wiki.xda-developers.com/index.php?pagename=prophet_bootloader
and read the NEW WM6 upgrade guide. which is a sticky on top of the page.
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
algorytma said:
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
Click to expand...
Click to collapse
read my post @ my signature...... please reply to that thread if you think helpful~~~
algorytma said:
Thank you..
i entered bootloader screen its showing operator logo and IPL SPL... vs
then i retry to run Upgrade_ROM.exe but there are no change ?
what must i see on bootloader screen ? and now my screen vibrating during on process now is it normal ?
PLS help ?
Click to expand...
Click to collapse
That is not bootloader... It should show a three coloured screen, and when plugged in to USB, the text in the bottom right hand corner should say "USB"
i have alredy given 2 posts .but no response from any seniour member.
i have p3400 old.it was running good.i have hspl it with olipro.flashed it many times with custom roms.every hing was going well.last time i wrong hspl with oref.now on startup at boot mood it shows spl.1.017 oref.and i cant go further.i have almost tried all roms.win 5.0,win 6 and win6.5 but all ends with error 300[invalid update utility].i have done mtty.exe.it is done it shows spl1.017 oref.
plzzzzzz tell me what happened to my phone.is it bricked.or it is changed to p3400i.what i do now.
sunnymobile said:
i have alredy given 2 posts .but no response from any seniour member.
i have p3400 old.it was running good.i have hspl it with olipro.flashed it many times with custom roms.every hing was going well.last time i wrong hspl with oref.now on startup at boot mood it shows spl.1.017 oref.and i cant go further.i have almost tried all roms.win 5.0,win 6 and win6.5 but all ends with error 300[invalid update utility].i have done mtty.exe.it is done it shows spl1.017 oref.
plzzzzzz tell me what happened to my phone.is it bricked.or it is changed to p3400i.what i do now.
Click to expand...
Click to collapse
r u stupid ? who told you to install oref hspl
i request all members of xda forum to not reply this type of post some stupid ppl creating same type of post daily without searching
n y do u use HSPL everytime u flash
n y do u use HSPL everytime u flash
i think this problem can be sort out if we can create the bootloader image of an OLD gene then using it through MTTY with the old GENE SPL image
Anybody knows how to do this?
You can try this....
1. Stop ActiveSync
2. Open Task Manager (press Ctrl + Alt + Delete) on your PC and
stop these two processes rapimgr.exe and wcescomm.exe
3. Plug in your device via USB. Your computer should be asking install a driver. Install and continue.
4. Now Run mtty and choose USB in 'PORT'
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset.
5. type "task 8" to get your device formatted.
6. Now unplug your device and manually reset it.
just a suggestion, found this for some other device.
hope this will work with urs too
do it at ur own risk
hey sunit here is that nb fileView attachment 1.10-Olipro.zip
stupidgye said:
hey sunit here is that nb fileView attachment 192772
Click to expand...
Click to collapse
guess its time u changed ur id
Lol yeah, Vaibhav this id doesn't looks that cool yaar And thanks for the Olipro SPL. I will develop the unlocker setup tomorrow.
Its just a login name yaar. BTW can i change it without creating a new profile?
NAAM MEIN KYA RAKHA HAI BHAWNAO KO SAMJHO
LOL, i think yes, coz Hariharan changed his username from svr_hari to haree. Try asking an admin, or before that, Hari
Yes u can change ur id
hi
yes u can what i did is ask a Mod who has become my friend through this Forum
but pls note i had also asked the same friend to make ur SPL cheker a Sticky and the same was done so i don't think it would be right now to ask him again
but ultimately it was done by Flar who is the admin for this forum so i suggest that u send a PM to flar and give a few options for ur id and im sure if possible it will be done good
i too feel u need a Id change and may be u can change it to smartkid as that is wat i would call u
krazy_about_technology said:
LOL, i think yes, coz Hariharan changed his username from svr_hari to haree. Try asking an admin, or before that, Hari
Click to expand...
Click to collapse
hi friends,
i have a htc dual touch with french language ,
i want to change the language to english ..
first i treid to do hard spl (getting error , not starting)SPL_1160000_Ship.exe
ps help me...
the info is
NIKI 100
SPL-10.16.0000
CPL4D
AND THE VERSION IS 131.71.09.........
and i have run the file
1."RUU_****_HTC_WWE_11340501_Radi.exe"
2.RUU_****_HTCASIA_AUS_13171012_.exe
3.RUU_****_HTC_WWE_2094051_Radio.exe
and the hard spl file "hardspl-1.22-****-shipped.zip"
but getting error
pls help me
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
can anybody tell me why its not starting even the hard spl??
ameerali19 said:
can anybody tell me why its not starting even the hard spl??
Click to expand...
Click to collapse
Sorry buddy, but you don't have hardspl and that is your problem, so you have to do the hardspl again.
Succes
sir
i have tried with these hrad spl files....
1.hardspl-1.15mfg-nike.zip
2.flash-hardspl-niki.zip
3.Hard-SPL-Neon.zip
4.hardspl-1.22-nike-shipped.zip
if i am wrong can you give me a good /working hard spl??
or how can i cid unlocikmthe phone(i dont know the phone is cid licked or not)
thanks in advance
Hi buddy, try this
1. Copy the sspl 1.16 to your phone.
2. Turned the phone off.
3. Removed sim and sd-card
4. Turn on the phone and launched sspl 1.16
5. Connect on computer and usb appears.
6. Running hardspl 1.22
Greetz,
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
ameerali19 said:
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
Click to expand...
Click to collapse
You have to flash the hardspl from your computer (same procedure as flashing a rom) while your phone is conncted to your computer and not try to run or launched it from your phone.
Greetz,
now its running suddenly to 100% and geting the error(244)
i have tried with the file
hardspl-1.15mfg-nike.zip
and
Hard-SPL-Neon.zip
pls help me
thanks in advance
Just do as I wrote above and don't try to use another Hardspl which is not ment for your device, because error 244 means that you have used the wrong RUU to do the upgrade.
If you have trouble's to flash the hardspl 1.22 just do it from the bootloader to get in the bootloader is turn your device off and turn it on while pressing the on/off button and the camera button on the same time.
Now you are in the bootloader (it's a 4-coloured screen with some text) connect your phone on your computer, phone must stay in bootloader and then flash Hardspl 1.22 from your computer.
That will do the trick.
Greetz,
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
run sspl1.16 on phone
disconnect USB cable
kill Active sync (or disable AS USB connections)
connect USB cable
run hspl 1.22
it must work...
or go to friend and do it on his computer...
ameerali19 said:
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
Click to expand...
Click to collapse
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
addgsm said:
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
Click to expand...
Click to collapse
Send me a pm and I'm gonna try to help you
Greetz
ameerali19 said:
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
Click to expand...
Click to collapse
i have same Problem ......
any other idea ?
Thanks.
denva said:
i have same Problem ......
any other idea ?
Thanks.
Click to expand...
Click to collapse
Hi denva, try it this way http://forum.xda-developers.com/showpost.php?p=11218363&postcount=701
Greetz,