i want to upgrade my qtek 2020 to the newest rom.i have the 1.60.00wwe rom.where in the forum can i find the files to get rid of the country error message?i also have tried to upgrade to 1.66 rom without luck.i still get the country error code.which is the best rom for my qtek 2020 and where i can find it?
Hi all,
recently i upgrade my Tytn to last rom available here. I´m a bit disapoiting about this upgrade so i´m considering the possibility to roll-back to original rom.
Since last upgrade change my bootloader to 1.09 and my original was 1.04, to roll-back i just have to run rom package or i have to do something before the downgrade?
Thanks in advance
phariseu said:
Hi all,
recently i upgrade my Tytn to last rom available here. I´m a bit disapoiting about this upgrade so i´m considering the possibility to roll-back to original rom.
Since last upgrade change my bootloader to 1.09 and my original was 1.04, to roll-back i just have to run rom package or i have to do something before the downgrade?
Thanks in advance
Click to expand...
Click to collapse
Can you tell the inital and upgraded ROM / Bootloader versions ?
Hi,
I had this package:
ROM - 1.18.255.3 07/22/06
ExtROM - 1.18.255.106
Radio - 1.03.03.10
Bootloader - 1.04
and i instaled last one available here.
Rom - 1.35.255.2 11/14/06
Bootloader - 1.09
(....)
Let me say that i bought my Tytn "free" unlock. I have no problem about this issue.
Is there any problem instaling original package? Bootlader turns again to 1.04 or remains 1.09?
Thanks in advance
i think you still can downgrade it to the original rom version as the CID is the same, but the bootloader should remain 1.09. here's a quote from the wiki.
Bootloader 1.09 DOES NOT allow DOWNGRADING of itself by means of flashing earlier ROMs. Once installed it is IMPOSSIBLE to DOWNGRADE SPL 1.09 to 1.06 or 1.04 by regular means!
harryk1372 said:
i think you still can downgrade it to the original rom version as the CID is the same, but the bootloader should remain 1.09. here's a quote from the wiki.
Bootloader 1.09 DOES NOT allow DOWNGRADING of itself by means of flashing earlier ROMs. Once installed it is IMPOSSIBLE to DOWNGRADE SPL 1.09 to 1.06 or 1.04 by regular means!
Click to expand...
Click to collapse
doesn't making the device SuperCID fix this problem?
[edit] and by problem, I don't mean getting 1.04 back, I mean there's really no point since you can flash any ROM you wish anyway, and I'm seriously asking cause I'm not sure [/edit]
diseage said:
doesn't making the device SuperCID fix this problem?
[edit] and by problem, I don't mean getting 1.04 back, I mean there's really no point since you can flash any ROM you wish anyway, and I'm seriously asking cause I'm not sure [/edit]
Click to expand...
Click to collapse
yes, if your device is supercid, you can flash the roms from different vendors. what is recommended for all is making the device supercid while you are still at the bootloader 1.04. if your device was made supercid while you had the original rom with the bootloader 1.04, you shouldn't have any problems with flashing whichever rom although the bottloader will remain 1.09 in your case.
You can flash any ROM that matches your CID. If you have SuperCID you can flash every ROM. The bootloader will remain 1.09 though.
Haven't installed it yet, but the official (WM5) Orange SPV M3100 upgrade is at http://www.business.orange.co.uk/servlet/Satellite?pagename=Business&c=OUKPage&cid=1044134915191
yes !!!!! it will be the good time, after 5 months, for my update problems dear pof ? Thanks
Downloading!
This is exciting, but i'm afraid to replace the WM6 I have on my M3100...
Would this remove the superCID etc?
Any news on what radio is in there (if any)
ORANGE M3100 Official Update is here!
Anyone installed this yet from the Orange website? If so, how does it compare?
Mark.
I'm currently using a french orange 3100. if i install this english rom will my OS change to english (i want it in englis but dont want wm6 just yet))
I'm assuming after installing it i have to use one of the keyboard hacks and change my internet setting/
OK : Just did a quick test....
Radio : 1.38.00.01
Protocol : 32.71.7020.12H
Rom : 2.11.61.6 (23/3/07)
Build : 15673.3.3.1
ipl : 1.01
spl : 1.09
Interesting the radio is 1.38.00.0.1 - i.e. quite old. I wonder if this has been tweaked for Orange - it's the same as the one in the French rom. I might try installing this radio to see how it goes.
Woop Woop,
This Is What I've Been Waiting For.
@jpxdude No It Won't Replace Your SuperCID
No More Warranty Issues.
Cheers
http://www.megaupload.com/?d=Q9YR81AS
Extracted .nbh File And Packaged With Olipros RUU Wrapper
Cannt install this update from Black 2.5
Hi guys,
I am using Wm6 Black 2.5 (OLIPRO 2.10) on my M3100 and when I am trying to install this update (BTW, it is a WM6 ROM ? ) I get an error from the RUU application that it cannot connect to the device (ERR 260). I have installed the Vista drivers and I don't know what to do ( I have read the guides and read the forum). Thanks in advance for any advice!
Regards,
Mihai
mishu said:
Hi guys,
I am using Wm6 Black 2.5 (OLIPRO 2.10) on my M3100 and when I am trying to install this update (BTW, it is a WM6 ROM ? ) I get an error from the RUU application that it cannot connect to the device (ERR 260). I have installed the Vista drivers and I don't know what to do ( I have read the guides and read the forum). Thanks in advance for any advice!
Regards,
Mihai
Click to expand...
Click to collapse
erm ..... "official (WM5) Orange SPV M3100 upgrade " ..... the (WM5) is a clue here
So it is a WM5 upgrade?! Thanks, but no thanks, I am a WM6 addicted!
petes said:
OK : Just did a quick test....
Radio : 1.38.00.01
Protocol : 32.71.7020.12H
Rom : 2.11.61.6 (23/3/07)
Build : 15673.3.3.1
ipl : 1.01
spl : 1.09
Interesting the radio is 1.38.00.0.1 - i.e. quite old. I wonder if this has been tweaked for Orange - it's the same as the one in the French rom. I might try installing this radio to see how it goes.
Click to expand...
Click to collapse
My device is reporting 2.11.61.1 (23/3/07), Operator version 14.211.1.611.
If you tell me how to work out the Ext. Rom version number I'll have a look and report that too.
so what rom would i need to install first in order to be able to install this update??? i am running black 2.5 also but want to go back to the orange preloaded version.
mishu said:
Hi guys,
I am using Wm6 Black 2.5 (OLIPRO 2.10) on my M3100 and when I am trying to install this update (BTW, it is a WM6 ROM ? ) I get an error from the RUU application that it cannot connect to the device (ERR 260). I have installed the Vista drivers and I don't know what to do ( I have read the guides and read the forum). Thanks in advance for any advice!
Regards,
Mihai
Click to expand...
Click to collapse
I have the same error as well. Is it because I have used hermes unlocker v3a to my M3100?
all those with 26x error, not able to update... extract the NBH file from the rom, then use CustomRUU (see stickies) to flash it.
petes said:
erm ..... "official (WM5) Orange SPV M3100 upgrade " ..... the (WM5) is a clue here
Click to expand...
Click to collapse
@PETE that is not the reason the upgrade is not running. He can just FLASH Olipro1.10 which is 1.04 based then flash this ROM. However the 260error is not coming from the device. It is coming from the PC. I do not have a VISTA machine so maybe someone else shed some light. He should also search the threads for that error because it has been mentioned numerous times before.
stukes said:
@PETE that is not the reason the upgrade is not running. He can just FLASH Olipro1.10 which is 1.04 based then flash this ROM. However the 260error is not coming from the device. It is coming from the PC. I do not have a VISTA machine so maybe someone else shed some light. He should also search the threads for that error because it has been mentioned numerous times before.
Click to expand...
Click to collapse
Sorry - I guess I should have been more clear - my WM5 comment was in response to his question "BTW, it is a WM6 ROM?"
darrellr said:
My device is reporting 2.11.61.1 (23/3/07), Operator version 14.211.1.611.
If you tell me how to work out the Ext. Rom version number I'll have a look and report that too.
Click to expand...
Click to collapse
Doh - fat fingers on my part - it's 2.11.61.1 as you say. Apologies.
[Help] ROM upgrade error
I tried to install the new M3100 ROM downloaded from the Orange page, and at the step before the M3100's screen goes tricolor, it got resetted and disconnected from my PC. The next thing I know I got an error saying "Your phone is not connected to your PC blah blah". Am I missing something here?
P.S: I dont have a craddle, the phone is connected using USB cable.
Have you done any upgrades on the device at all?? (such as HardSPL or a new radio)
Help needed.
I have flashed my tytn with the original WM6 version now i bootloader spl 2.03 can i downgrade this spl ? If not what can i do whit this version ??
I have tried to upgrade radio version to 1.51 but i always gives me an error
mrc_louco said:
Help needed.
I have flashed my tytn with the original WM6 version now i bootloader spl 2.03 can i downgrade this spl ? If not what can i do whit this version ??
I have tried to upgrade radio version to 1.51 but i always gives me an error
Click to expand...
Click to collapse
flash hard-spl genius.
Hi everybody, just got my hd2 and it's a french version of wm, it's 3.14.163.3 (SFR), when i try to downgrade it with the RUU file 1.66.406.1 (french version 1.66), the program stops and tells me to verify the version of the rom...
So im wandering how can i downgrade to 1.66 so that i can have the lower spl version for installing NAND android. Any help?
I have read some threads and im trying to find a version 1.66.163.x to fit my phone but cant find it !....
No need to downgrade anymore, hspl4.