For All You Retards Who Can't/Won't Read The Wikki Heres How To Flash Just The OS File And The Ext Rom.
First Of All Your Device Must Be SuperCID To Do This Otherwise It Just Won't Work. I'm Assuming You All Know How To Do That So Theres No Need To Explain.
First Of All You Need To Get This File And Extract It On Your PC.
ftp://ftp.xda-developers.com/Hermes/Cooked_ROMs/SPL-1.01MFG_Pack.zip
Now You Then Need To Follow These Instructions. (WHEN USING MTTY YOU HAVE TO TYPE ALL OF THE COMMAND DO NOT COPY AND PASTE THEM AS IT DOESN'T WORK)
1.Put hermes in bootloader mode (side ok + power button + softreset)
2.Connect Hermes to computer using USB cable.
3.Open mtty.exe, select "USB" from the dialog box, then hit Ok.
4.Hit enter twice and you'll see the "USB>" prompt.
5.Then type these commands: (note the use of 'lnb*s*')
USB>task 32
Level = 0
USB> lnbs SPL-1.01.nbs 50020000
USB> task 8
6.Device will reboot after this, with bootloader 1.01-MFG on it.
Next Download The AKU 3.3 Update Of Your Choice From The FTP.
Open The .exe File With A Program Like WinRar And Extract The nbh File In There. There Will Only Be One With The Extension .nbh
Now Download The NBHextract Program And Extract The ROM Contents.
http://forum.xda-developers.com/showthread.php?t=289830
1. Open A Command Prompt In Windows
2. Change To The Directory With NBHextract In It.
3. Type This Command At The Command Prompt
C:\> NBHextract.exe <NBH File Name>.nbh
4. Make Sure That RUU_signed.nbh Is In The Same Folder As NBHextract. Also Change The <NBH File Name> To Whatever Your File Is Called.
Finally You Can Flash The Extracted OS.nb and ExtROM Files To Your Hermes Using These Instructions.
For The OS.nb File
1.Put hermes in bootloader mode (side ok + power button + softreset)
2.Connect Hermes to computer using USB cable.
3.Open mtty.exe, select "USB" from the dialog box, then hit Ok.
4.Hit enter twice and you'll see the "USB>" prompt.
5.Then type these commands: (note the use of 'lnb', without 's')
USB> task 32
USB> task 28
USB> lnb OS.nb
USB> task 28
USB> task 8
And For The ExtROM file
1.Put hermes in bootloader mode (side ok + power button + softreset)
2.Connect Hermes to computer using USB cable.
3.Open mtty.exe, select "USB" from the dialog box, then hit Ok.
4.Hit enter twice and you'll see the "USB>" prompt.
5.Then type these commands: (note the use of 'lnb', without 's')
USB> task 32
USB> lnb ExtROM.nb 57500000
USB> task 8
All Credit Goes To Pof For The Instructions I Have Mearley Collated Them Into One Place, For Those To Lazy To Go Looking For Them. Enjoy The New AKU.
Cheers
I did it this way to save time and had no issues.
It saves the multiple reboots since after this you need to install HTCtweak to get the extrom back so you can put the files you need it and then reboot etc etc...... so I saved myself a good 45 sec to a minute
USB> task 32
USB> lnb ExtROM.nb 57500000
USB> task 28
USB> lnb OS.nb
USB> task 28
USB> task 8
Stuck?
So this is my firs time flashing a rom via mtty, and i was just wondering, is there supposed to be some kinda progress bar/info of some kind after this line:
start NB image download
or ist it just gonna sit there for the usual ?hour?
edit: Never mind, a little filename glitch
pof wiki says it all
I did use that one, i just misstyped,
wrote lnb OS.nb istead of
lnb 06_OS.nb
y get through all this trouble.. just upgrade the whole thing.
i upgraded to latest rom aku 3.3 WITHOUT doing all this. i have bootloader 1.04
Then you might never be able to do individual Radio ROM upgrades ever again because most of the AKU3.3 updates come with Radio ROMs that have HTCBOOT 1008 which doesn't allow individual Radio ROM Upgrades.
..
When you say "most of the AKU 3.3 roms", are we sure this is the case for this one?
What is the way to see it?
Thanks!
Which RUU did you flash? If its the one that's the TEST or the Swedish one, you're outta luck for the Radio Bootloader...
If you flash the whole thing you should be able to go to the official Cingular Rom right? Guess you still need to CID first?
echoz said:
Then you might never be able to do individual Radio ROM upgrades ever again because most of the AKU3.3 updates come with Radio ROMs that have HTCBOOT 1008 which doesn't allow individual Radio ROM Upgrades.
Click to expand...
Click to collapse
If it is SuperCID already he can Flash an entire previous ROM to get the old HTCBOOT 1007. Still better to do it manually so you can get the Best AKU/ROM/Radio and BL combo since each BEST one comes from somewhere different.
BTW to OP this is great post and hopefully will stop some pointless threads.
Thanks... I got Stuck... But I was going to change back to 1.04 and was going to give up... But i noticed in the SPL-1.01MFG_Pack folder there were *.nb files for 1.01 and 1.04... So for one last hurrah I stuck the 06_OS.nb file in there and tried again... To my suprise it worked...
wpbear said:
If it is SuperCID already he can Flash an entire previous ROM to get the old HTCBOOT 1007.
Click to expand...
Click to collapse
Won't work!
Once you have the new radioboot, it's there to stay forever! So watch out with it!
So you can only go forward then right?
Umm.... Going on 30 minutes now...
I've been flashing my device for about 30 minutes now... and it's stuck at this point... There's no progress bar... no indication that it's doing anything.... Did I brick my phone?
Please help...
Mtty.exe
====================
USB>task 32
Level = 0
USB>task 28
Storage format start
Write Nand Success
dwBlockToWrite = 13
Storage start block: 461
Storage Total block: 475
Total Bad Block in CE: 0
NeedToEraseBlockStart: 474
Storage format success
USB>lnb OS.nb
:F=OS.nb
:A=501A0000
:O=00000000
:L=FFFFFFFF
start NB image download
==============================
The cursor just continues to blink at this point... and the bootloader continues to show MFG SPL-1.01... Is this normal...should I just continue to wait? should I try again... should I reflash a different rom?
Please help... Thank you in advance...
Mark
NEVERMIND!!
I'm sorry... I failed to recognize the name of the file was 06_OS.nb.. Renamed the file to OS.nb and it is showing the progress indicator now... My apologies...
Excellent FAQ's and Wiki... Thank you all.
Now I'm crossing my fingers for that GPS to come through...
Mark
Hey people, i understand the frustration of people asking the same thing over again but ive had a few people asking me about this aswell IRL,
Having got settled with the ROM/Ext ROM/Radio etc... that are on my Hermes would adding the AKU3.3 update be advisable right now??
Also if i/we go ahead with this update will it require a full wipe of the device again (ie same as when a new ROM is put on)??
P.S: What are the benefits?
My question is that I see that the only 3.3 options are Swedish and Russian, and I speak English. What's the word on this?
There is an English version: ftp://xda:[email protected]_WWE_2.05.255.1_6275_1.34.00.10_108_Test.exe
If you are willing to upgrade just the ROM itself, I think it's worth it. This new 2.05 ROM has AKU 3.3 and it's very fast compared to any other ones. I'm currently running Swedish 2.05 ROM and patched it to English. Soon, I'll be flashing it to English 2.05. Full ROM upgrade (by double clicking the .exe file) is not recommended.
Related
Have tried all sorts and still cannot boot after using the wrong sim unlock.
Have tried doing hard reset and then soft reset instead of spacebar, it still did not boot.
MTTY command set 14 0 and soft reset made no difference.
Tried the SD card method but it didn't work as Orange have not relesed an ugrade yet (Jan 2007 I've heard) CID is ORANG001.
Trying to reflash with any other ROM I either get connetion error or non compatability error. Using USB Monitor shows no results although MTTY commands do show up.
Is there any way I can reflash with original ROM? I have access to a locked SPV M3100, could this help in any way?
When phone tries to boot it shows:
M05
S04
B05
No GSM
D 1.23
I know the radio part is screwed and have tried to flash radio only, nothing happened and nothing showed in USB Monitor.
Even tried method used by Kimbay http://forum.xda-developers.com/showthread.php?t=280228 this also had no effect.
Hoping someone somewhere can help, I know quite a few people are in the same situation and if a solution can be found will help others if I can.
Thanks to pof who has already given me some advice, sadly none of it worked.
I have a similar problem as you, and i have tried everything, my last test will be when I get an original rom for my device that matches my CID.
There is no date for my original rom to be delivered so I have to wait.
rachelm700 said:
Trying to reflash with any other ROM I either get connetion error or non compatability error. Using USB Monitor shows no results although MTTY commands do show up.
Is there any way I can reflash with original ROM? I have access to a locked SPV M3100, could this help in any way?
...
I know the radio part is screwed and have tried to flash radio only, nothing happened and nothing showed in USB Monitor.
Click to expand...
Click to collapse
Had the same problems as you, This is how I repaired it:
http://forum.xda-developers.com/showthread.php?t=280425
Houz74 - Tried your method, never got past the white screen. Will keep trying.
I tried this, but as I don't have an original rom and being on bootloader 1.06.
Its not a big problem as I have 2 tytn, one to play and one for proper use.
rachelm700 said:
Houz74 - Tried your method, never got past the white screen. Will keep trying.
Click to expand...
Click to collapse
Didn't work for me in one time too, had to reset both my phone and my pc for it.
After which step do you get the white screen ?
You could try this ROM:
ftp://xda:[email protected]/Himalaya/ROM166/RUU166223WWE.exe
Use it til just after the erasing part of the upgrade.
You have bootloader 1.04 ? Otherwise this method doesn't work
Houz74 said:
Didn't work for me in one time too, had to reset both my phone and my pc for it.
After which step do you get the white screen ?
You could try this ROM:
ftp://xda:[email protected]/Himalaya/ROM166/RUU166223WWE.exe
Use it til just after the erasing part of the upgrade.
You have bootloader 1.04 ? Otherwise this method doesn't work
Click to expand...
Click to collapse
Bootloader version is 1.04
Tried above method, results below:
1. Welcome to the Pocket PC software upgrade utility.
2. Checking the information on your pocket PC... Please wait...
SCREEN GOES WHITE AT THIS STAGE
3. update screen:
CE image version 1.66.00
Extended image version 1.66.223
Radio image version 1.10.00
4. Checking
5. The current sofware is being erased from your Pocket PC.
Even if left for over an hour this stays at 0%
I got the same results with RUU120_172125_Qtek_WWE_R11400_Shipping but obviously the update screen shows different CE Image Version etc.
Sorry for the lengthy reply but wanted to show as much info as possible. Have tried both ROMs many times and hangs at the same stage every time.
rachelm700 said:
I got the same results with RUU120_172125_Qtek_WWE_R11400_Shipping but obviously the update screen shows different CE Image Version etc.
Sorry for the lengthy reply but wanted to show as much info as possible. Have tried both ROMs many times and hangs at the same stage every time.
Click to expand...
Click to collapse
Can you do a full USB monitor caputre of the process when trying to put the Himalaya ROM? I explained how to do it here:
http://forum.xda-developers.com/showpost.php?p=1036494&postcount=4
If we don't know 'what goes on through the USB cable' we will not be able to understand why the problem is fixed using this method, and what prevents the erase proces to end in your case.
There are two erase commands in Hermes bootloader 'erase' and 'rerase' (for radio) which take an address and a length as arguments. If you look at what the upgrade tries to do, you can do it manually after from the bootloader.
Hi pof
This is what was captured with USB Monitor, the first is RUU166223WWE
the second is from RUU120_172125_Qtek_WWE_R11400_Shipping
In both cases nothing seemed to show up after the screen which says: The current software is being erased from your Pocket PC - it just hangs at 0% no matter how long it is left.
Not sure which Himalaya ROM you meant so have posted the results from these two for now. Please advise which Himalaya ROM should be run.
rachelm700 said:
Not sure which Himalaya ROM you meant so have posted the results from these two for now. Please advise which Himalaya ROM should be run.
Click to expand...
Click to collapse
The Himalaya ROMs you used are OK, both files show the same output. These are the commands sent to bootloader and my explanation of the process:
Code:
USB> USBPortTest
Command error !!!
This should be Himalay specific, not working on the Hermes bootloader, so it says "command error".
Code:
USB> info 0
USB> info 1
On the Himalaya, "info 0" returns platfrom name (16 bytes) and "info 1" returns bootloader version (16 bytes). On the Hermes these commands return nothing (no output).
Code:
USB> password 0000000000000000
HTCSPass1..CM??HTCE
Himalaya RUU sends "password 0000000000000000", on the hermes this password is dynamic and the RUU should issue "info 3" command first to calculate the password, but as "info 3" has not been issued yet the Hermes bootloader returns Pass1 encapsulated in HTCS/HTCE block, which is the output when the password is valid!!!
Code:
USB> set 1 0
USB> set 6 ffff
USB> set 2 1
USB> set 5 F800
These commands are the same in the Himalaya and in the Hermes:
- "set 1 0" sets the operation mode to user which makes the other commands return more friendly values
- "set 6 ffff" changes the screen color to FFFF
- "set 2 1" change back color on
- "set 5 f800" changes background color to F800
Code:
USB> info 2
This should return the CID on the Hermes, but it does not ... I don't know what it does on Himalaya. As I see no output from your Hermes here, I guess the proces has already stopped, so the following commands sent by the RUU will not work.
Code:
USB> set 1e 1
This unlocks the read/write flag, should be always done before flashing. (when the flash process ends, it should be done the oposite: "set 1e 0").
Code:
USB> rbmc Temp.txt 70010000 28
This reads 28 bytes of memory starting from addres 0x70010000 and saves the read data to Temp.txt file.
I don't know what there is on this memory address (anyone?), but I guess it's himalaya's specific.
The "juicy" commands will come after this one, but your hermes doesn't seem to pass from here. Luckily I found on buzzdev.net the Himalaya upgrading process, which shows exactly the same process as I can see in your attached files, so the following that should come here if your Hermes was still alive is this:
Code:
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 1
USB> wdata a0040000 20000
The last 'wdata' command will not work on the hermes (it uses 'wdatah' instead) so nothing is written on the rom, just erased.
CONCLUSION:
If you feel brave, and always at your own risk, what you should do to fix your bricked hermes with screwed radio is this:
1) Put your Hermes in bootloader mode
2) Disable USB connections in ActiveSync
3) Open mtty.exe and select USB port, then connect.
4) Hit enter twice, you will see the "USB>" prompt.
5) Type the following commands (do not copy paste!!!):
Code:
set 1e 1
erase a0040000 c80000
erase a0cc0000 c80000
erase a1940000 640000
set 1e 0
6) Reset your phone and put it back in bootloader mode
7) Flash the Hermes rom of your choice (if your bootloader is 1.06 it MUST match your CID, if it's 1.04 it isn't important)
Good luck and let us know how it goes!
I think you will need to authenticate to the bootloader before issuing the "erase" commands, otherwise the bootloader won't let you erase.
When you are on "step 5" of the process I described before, if you get an error when issuing the first "erase" command try these commands instead:
First try to use the "Himalaya" method, as it worked for some people:
- in step 5, use these commands:
Code:
password 0000000000000000
set 1e 1
erase a0040000 c80000
erase a0cc0000 c80000
erase a1940000 640000
set 1e 0
If it doesn't let you erase, then you'll have to authenticate to bootloader using the dynamic password.
The attached file will try to authenticate to the bootloader for you, so you don't need to go through all the process described in this PDF, which is a bit tedious. It should be run before you actually open mtty on step 3, when it authenticates sucessfully it should show the message "Entered advanced bootloader", when you see it you can open mtty and follow the next steps. Probably it doesn't work at first try and you have to run TryBootloader.exe several times before it acctually successfully authenticates to the bootloader, but it's better than the process in the pdf
Once you're actually authenticated correctly with TryBootloader.exe, just run the commands in mtty as in step 5, do not use the "password" command again.
Let me know if something is unclear or you need more help.
Yipee, It's back to life, please see new post
http://forum.xda-developers.com/showthread.php?t=280733
1) Put your Hermes in bootloader mode
2) Disable USB connections in ActiveSync
3) Open mtty.exe and select USB port, then connect.
4) Hit enter twice, you will see the "USB>" prompt.
5) Type the following commands (do not copy paste!!!):
Code:
set 1e 1
erase a0040000 c80000
erase a0cc0000 c80000
erase a1940000 640000
set 1e 0
6) Reset your phone and put it back in bootloader mode
7) Flash the Hermes rom of your choice (if your bootloader is 1.06 it MUST match your CID, if it's 1.04 it isn't important)
Dear Prof:
I'm totaly stuck trying to flash it with Qtek 2020 with 0%. Also, noID did not work as it show no radio or other CE version numbers and end with sucessfully completed operation. I would appreciate if you can advise me.
Hi, i want use the mtty but, when i select the usb, the promp file go to the cmd>
dont appear the usb>
I have Xda Trion Herm100 and in Hermes_Upgrade Problems i saw my problem solution:
Problem 5: Device shows NO GSM when booting
* The radio stack is screwed, you don't get GSM signal and the phone says unknown SIM status
* Device won't start after trying to unlock it with HTC Universal Unlocker (HTC_Uni_SIM_Unlock_v1)
Here is how to fix it:
1. Disable activesync on your computer by right click on activesync icon -> connection settings -> uncheck "allow USB connections".
2. Put your Hermes in bootloader mode
3. Connect device to computer using USB cable.
4. Open mtty.exe and select USB port, then connect.
5. Hit enter twice, you will see the "USB>" prompt.
6.
Type the following commands (do not copy paste!!!)
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
7. Reset your phone and put it back in bootloader mode
8. If your bootloader version is different than 1.04 then Flash Bootloader version 1.04
9. Flash the patched radio used to simunlock the Hermes
10. Your phone should be alive again
Click to expand...
Click to collapse
and i was so happy, but on step 6 i can`t understand when i`m writing the first row " USB> password 0000000000000000" and hit Enter it is show "HTCSPass1.CM€ЛHTCEUSB>"
and i`m thinking is on that row i must write " USB> set 1e 1" or i must hit Enter to show me new "USB>" and then write " USB> set 1e 1" ( Here is the log
USB>password 0000000000000000
HTCSPass1.CM€ЛHTCEUSB>
USB>set 1e 1
USB>erase a0040000 c80000
HTCST ЪИТHTCEUSB>
USB>erase a0cc0000 c80000
HTCST ЪИТHTCEUSB>
USB>erase a1940000 640000
HTCST ЪИТHTCEUSB>
USB>set 1e 0 )
and finnaly when i write "USB> set 1e 0" must hit any of the buttons or only close the programm ( is there any button to save these rows on the Xda device or it is automatic )
then in bootloader mode there are 2 text ..
One in white colour
"Herm100
IPL-1.01"
and one in yellow colour
"Herm100
SPL-1.06"
which of them is my bootloader version, and if 1.06 is my bootloader please tell me how to flash with bootloader 1.04 and at last
"9. Flash the patched radio used to simunlock the Hermes"
where is this Patched Radio ...
thank you in advice
WorldMaster said:
when i`m writing the first row " USB> password 0000000000000000" and hit Enter it is show " "
Click to expand...
Click to collapse
It should show you "Pass1" encapsulated in HTCS-HTCE block. Otherwise somthing is not going ok. You don't have to type "USB>" this is the prompt from bootloader.
WorldMaster said:
and i`m thinking is on that row i must write " USB> set 1e 1" or i must hit Enter to show me new "USB>" and then write " USB> set 1e 1"
Click to expand...
Click to collapse
It doesn't matter, you can write it on this row or hit Enter and write it on a new row.
WorldMaster said:
and finnaly when i write "USB> set 1e 0" must hit any of the buttons or only close the programm ( is there any button to save these rows on the Xda device or it is automatic )
Click to expand...
Click to collapse
You can safely close mtty when finished, each command is executed on the device after you hit enter, no need to save or anything.
WorldMaster said:
then in bootloader mode there are 2 text ..
One in white colour
"Herm100
IPL-1.01"
and one in yellow colour
"Herm100
SPL-1.06"
which of them is my bootloader version
Click to expand...
Click to collapse
You have bootloader 1.06.
WorldMaster said:
and if 1.06 is my bootloader please tell me how to flash with bootloader 1.04
Click to expand...
Click to collapse
In short, you can't... but please read the wiki, and search this forum before asking.
WorldMaster said:
and at last
"9. Flash the patched radio used to simunlock the Hermes"
where is this Patched Radio ...
Click to expand...
Click to collapse
See sticky post in this forum:
http://forum.xda-developers.com/showthread.php?t=282073
pof said:
You have bootloader 1.06.
In short, you can't... but please read the wiki, and search this forum before asking.
Click to expand...
Click to collapse
thank you, if i`m understanding you i must flash with ROM O2_1.25.207.1_GER.exe am i right ?
but what is the difirence from the two ROM ?!
German Versions (GER)
O2 Germany German http://dict.leo.org/de.gif O2___102 1.25.207.1 07/26/06 ?? 1.07.03.10 32.41.7010.02W 14955.2.3.0 1.04 Download Thread
O2 Germany German http://dict.leo.org/de.gif O2___102 1.25.207.2 12/??/06 ?? 1.07.03.10 32.41.7010.02W 14955.2.3.0 1.04 Download Thread
but if the phone can not start Windows how can i connect it to Activesync, so i can connect it to ROMUpgradeUt.
I have tried flashing from SD with HERMIMG_O2_1.25.207.1_SHIP.nbh renamed to HERMIMG.nbh, but when the Xda tried to check the file it shows
"0020002
Not allow"
WorldMaster said:
thank you, if i`m understanding you i must flash with ROM O2_1.25.207.1_GER.exe am i right ?
Click to expand...
Click to collapse
If your CID is O2___102, yes. But most probably you have a corrupted CID, I can't say for sure because you did not provide any USB monitor capture as advised on the wiki upgrading problems.
WorldMaster said:
but what is the difirence from the two ROM ?!
Click to expand...
Click to collapse
On the wiki, last column is a link to the rom thread on the forum. look at it: http://forum.xda-developers.com/showthread.php?p=1072922
"No changes except HSPDA enabled."
WorldMaster said:
but if the phone can not start Windows how can i connect it to Activesync, so i can connect it to ROMUpgradeUt.
Click to expand...
Click to collapse
1st thing RomUpgradeUt does is killing activesync and put device in bootloader mode... you don't need activesync to do a rom upgrade, you can start it from bootloader.
WorldMaster said:
I have tried flashing from SD with HERMIMG_O2_1.25.207.1_SHIP.nbh renamed to HERMIMG.nbh, but when the Xda tried to check the file it shows
"0020002
Not allow"
Click to expand...
Click to collapse
This almost confirms that your CID got corrupted... you'll probably need to send the device to service centre.
This has also happened to me, and I've tried everything to recover my device. There seems to be no way to fix this problem but to replace the main board.
The only other possibility is to cook a rom (which is far far away) and skip the CID check.
pof -> I'm still waiting for the fix.. hehe
axiom said:
here seems to be no way to fix this problem but to replace the main board.
Click to expand...
Click to collapse
I guess it is not needed to replace the main board, in the service centre they should fix this with a special sd card.
axiom said:
The only other possibility is to cook a rom (which is far far away) and skip the CID check.
Click to expand...
Click to collapse
the CID check is done in bootloader, a cooked ROM (which is not that far away) will not help: The ROM can be cooked and the CID set to whatever value you like, the problem is that it can't be signed with the proper keys, so you have a ROM "matching" the corrupted CID but if it's not signed you can't flash it.
axiom said:
pof -> I'm still waiting for the fix.. hehe
Click to expand...
Click to collapse
If you or somebody else want to send me a cid-corrupted device i'll be glad to investigate, otherwise is very difficult that I can know how to fix this without physical access to the bricked device...
Help!!
I not down boot loader from 1.06-->1.04. I user Herm300, when power then "no gsm" and not boot to window. Please help me.
I try to flash rom ENG to my NIKi
my version is 1.31.406
I read post "Nike SSPL, USPL and HardSPL" by jockyw2001
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
******* but it's still 0% and still boot loader screen*****
I Hard reset my NIKI but still bootloader and show
NIKI100
SPL-1.16.0000
CPLD-4
I try to flash this rom "RUU_Nike_HTC_WWE_1[1].13.405.01_Radio_Nike_1.58.11.07_signed_Test.exe"
It's 1% only and report error 262
"ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue."
How to repair this
in post "http://forum.xda-developers.com/showthread.php?t=387217" by NetrunnerAT
"1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!! "
I try this It show log
"boot
Fill RSVD information for block 288 to 309
Storage start sector=0xAF00, total sector=0x103C0
Storage start block=721, total block=1039
Total Bad Block in CE: 0
Erase physical block from 1011 to 2032
si backup: Erase physical block from 2032 to 2048
Card inserted
SDHW_EnablePowerOn
SDHW_ConfigGPIO
Cmd5 CMD_TIMEOUT
Cmd8 CMD_TIMEOUT
SD Init OK
SDFATChkConf: RhOpenFile() failed NIKECONF.txt
OEMGetUpdateMode
OEMTranslateBaseAddress 23 80000000 80000000
IPLMSG:0x8:INFO: Loading image ...
IPLMSG:0x9:INFO: Jumping to image...
OEMLaunchImage 80000000
Jump to Physical Address 10300000"
and still boot loader
how to fix it's
Thank' for reply
Please tell us ... what you have done before ... step by step!!!!
If you stay in the Bootloader and MTTY "boot" doesnt work, try the oemsbl with the command "cego"
NEXT ... what NIKI you have? German? UK? TIM? Vodovone branded?
You tell us not enough, too help you!
NetrunnerAT said:
Please tell us ... what you have done before ... step by step!!!!
If you stay in the Bootloader and MTTY "boot" doesnt work, try the oemsbl with the command "cego"
NEXT ... what NIKI you have? German? UK? TIM? Vodovone branded?
You tell us not enough, too help you!
Click to expand...
Click to collapse
Sorry For My Eng = =' I'm Thai girl.
I can't Remember lang before flash becouse I don't Know ^ ^ GER or Italy or Rus Lang
It's Not Eng Lang not Vodafone Brand
I'm new bie for this model . I have Dopod 818 pro It's Easy to flash I think Niki Is same
command "cego" notwork
Can I reflash any Office Rom?
What is SPL-1.16.0000 mean It's Hard SPL,SSPL or USPL
I Try to Put camera button and power button
and Use Mtty
boot
InitDisplay: Display_Chip=1
Card inserted
SDHW_EnablePowerOn
SDHW_ConfigGPIO
Cmd5 CMD_TIMEOUT
Cmd8 CMD_TIMEOUT
SD Init OK
SDFATChkConf: RhOpenFile() failed NIKECONF.txt
OSSIReadBack ++
Read SI data from flash success
tail signature match
Checksum match
UserStorageSIPreload ++
My NIKI Can boot and Use Now
I don't Know what Lang
" A Propos de
Windows Mobile 6 Profesional
Processeur : MSM7200-400Mhz
Memorie :101.67 Mo
Conecteur d'ext. :En cours d'utilisation
Informations de L'appareil
Version de Rom :1.31.406.09
Date de Rom :10/30/07
Version de Radio 1.58.16.27
Version de prot.. 25.61.30.03w
Is lang France?
@^ ^@
Hoorayyyyyyy
My phone is back
many thank's for NetrunnerAT
1. Download MTTY and connect via USB (dont forget do disable Activ Sync!!) us command Boot, to force a OS Boot!
2. After OS is Started ... Download SSPL and Copy it to your Phone ... please remove SD Card and SIM ... Start this Program!
3. Now you are in the Bootloader but it tells something about SPL 1.16Jump ... now you can Flash Hard SPL!!! If you doesnt see 1.16Jump you CAN'T Flash HardSPL!!
4. Now you can Flash my Dumped TIM Rom!!! "
and Now I Use rom TOM_Niki-Project_WM6[1].1_WWE_16keys_signed_Ship.exe
Many many Thank For XDA - Developers
http://www.pdamobiz.com/ <- its a Thai PDA Board!
The most errors on HTC Niki are simulare with HTC Polaris and HTC Kaiser!!!
I hope this helps!
my touch dual is lock at 3 color mode
Sorry for my english....
My niki is locked afther flash for unlock it (supercid)
I've tried to install a sspl and hardspl, but all have crashed at 95%
I've tried to install hardspl renaming the file nbh in NIKEIMG.nbh from sd, but this procedure have only send me message: loading......... and nothing all.....
At this moment my niki is stopped at 3 colors mode
Have you any idea for help me?
Many thanks to all
don't have any idea for help me?
i can use my niki for stop my door?
thanks
Works very well
This really helps me out!!!! Thanks to NetrunnerAT.
but the site is in thai language
Hi,
I have a big problem.
Sorry, but i already search in this forum but no success.
I upgraded a ATH100 with a SPL 3.65 ATH400 Rom
Now, i try to back to ATH100 but i cant. With PC and RomUtility, i get MODEL ID 244 error.
With SDCard i get 00058002 error while Loading...
Anybody can help me.?
Thanks
athena400back to 100
i was in too, now if you cant downgrade yet,sent me an Email ,to [email protected] and sending to me alot of pic from thet and information about your rom.
hi guys,
I had the same issue too....can not flash from SD card with 00058002 loading ...
any solution yet ??
hi guys,
I had the same issue too....can not flash from SD card with 00058002 loading ...
any solution yet ??
I have same problem. Please anybody can help me?
Try out This>>>>>
ERROR [244] : INVALID MODEL ID
from cmonex @xda-dev
This is good for both corrupt modelid and corrupt wifi, and fixes both at the same time.
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
NOTE, the command starts with a lowercase "L", not "I"!
WARNING: PLEASE DO NOT MIX UP THESE TWO DIFFERENT COMMANDS!!!
if this info helps: most people will have SPL 3.xx, and if you have AP4 (not vanilla) already running then you're definitely 3.xx
13. mtty will popup a window asking "OK", you press OK!
if you get "Fail to synchronize with the host (1)", then make sure you did follow step by step. if still same error, try placing mtty and the bin file under C:\.
14. now the file downloads, if mtty reports it flashed the file, and at the end "code entrypoint unknown", then that's it, now boot back to WM and see if wifi works.
Download: Mac1.zip mtty_0513_Test.zip
But where atachment ?
For me....WORK...THANKS again CMONEX
but i not do to repair wifi i want to flash my wm........
help me please ,,,
i make hard spl for athe400 in athe100
"ERROR [244] : INVALID MODEL ID
from cmonex @xda-dev
This is good for both corrupt modelid and corrupt wifi, and fixes both at the same time"
as it says it fixes corrupt modelid
It is worth a try
ERROR[244] :Invalid model ID ATHE100
Hi,where do i find the MAC adress for my ATHE100 as i cannot get forward from the bootloader?I am using SPL-v1.20.Olipro.Thanks to any1.
Yes, where is the MAC ADDR
As above, would be grateful if anyone would help us find where the MAC address and thanks for this thread this is the bane of most new owners and newbies. Cheers!!
Mac addr found, but......
Yes found the MAC address - it's under the battery cover, but having gone thru the whole process I got the following 3 errors at the end-
ERROR: no header matched
Transfer CERT error
Flash Programming Error
Thanx buddies!
3 ERROR Messages!!!
Hi Lakeman, could you help decipher these mysterious errors which I had after I have gone through the process twice
ERROR: no header matched
Transfer CERT error
Flash Programming Error
Thank you!
invalid Command
command error
whats wrong???
Cmd>lnb ameo.bin 76508000
lnb ameo.bin 76508000
Command error !!!
here you go >> http://xacsx.de
german ameo-site, roms, repair, and other helpful things
command error
whats wrong???
Cmd>lnb ameo.bin 76508000
lnb ameo.bin 76508000
Command error !!!
if you get notice
-> ERROR [242] : INVALID LANGUAGE
-> ERROR [244] : INVALID MODEL ID
-> ERROR [294] : INVALID VENDER ID
-> ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
stuck in bootloader. Help needed.
I have a HTC Athena x7500.
accidentally upgraded my htc x7500 WITH SSPL-Manual-x7510.zip of HTC X7510
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10.0000
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I have explored ruu_signeg.nbh in spanish rom with notepad jai entered the signer spl 1.10 I know if is sure or not
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
with mtty : task 32 level=ff
is what I can fix this problem with mtty
so if possible please guide me
I board on my pda (cid locked)on the Spanish language HTC_304
sorry for my bad Englis
thank you in advance
My email: [email protected]
http://forum.xda-developers.com/showpost.php?p=5205291&postcount=8
I think there is another thread somewhere about this but you could try the incorrect ID fix in the post above
and try to do the lower SPL
after unlock my athena is dead, go only in bootloader mode with this write:
ATHE100
IPL-1.00
ATHE100
SPL-v1.10.RP00
ALL ROM NOT RUN, CAN NOT CHANGE SPL,
I HAVE TRIED AND ORIGINAL ROM version hangs 1% WITH THE WRITTEN "INVALID ID .."
PLEASE HELP ME
GORGOMED
Don't worry, it happens all the time. Just follow the procedure of "How to fix the invalid model ID after bad flashing" step by step as described in the following page:
http://forum.xda-developers.com/showthread.php?t=405814
Good luck!
hi,i make this procedure ,but replay of the athena is this:
Cmd>task 32
Wait interpreter timeout
Level = FF
have read in some post ,when reply is FF is because SPL is original ,in fact my SPL is 1.10.RP00 not 1.12 olinex or olipro ,i needed how do I change only SPL and make open to Athena for upgrade rom.
tnx
RE HELP
I'm trying to put the original ROM, 1% BUT STOPS AND WRITE ERROR VENDOR ID "mtty DO THE PROCEDURE, BUT I DO NOT TO" LEVEL 0 "MA" LEVEL FF "AND I CAN NOT PUT THE MAC LIKE GOING FORWARD?
TNX
please help me
who is help me!!
tnx
nessuno parla italiano e mi fa capire che devo fare
giusto ,chi sa che devo fare?
Maybe this?
gorgomed said:
after unlock my athena is dead, go only in bootloader mode with this write:
ATHE100
IPL-1.00
ATHE100
SPL-v1.10.RP00
ALL ROM NOT RUN, CAN NOT CHANGE SPL,
I HAVE TRIED AND ORIGINAL ROM version hangs 1% WITH THE WRITTEN "INVALID ID .."
PLEASE HELP ME
GORGOMED
Click to expand...
Click to collapse
Try this...I do not know if you need to reset your MAC address...
http://forum.xda-developers.com/showthread.php?t=387454&highlight=mtty&page=4
I had this once and I needed a new MAC address....you can get it from any unused wireless device.
i make this procedure 100 times,but also write up :
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0 - MY RETURN NOT LEVEL 00 BUT LEVEL FF
BECAUSE I DO NOT SPL 1.20 OR 3.XX NOT PACHED,THIS MY PROBLEM
I DO NOT CHANGE SPL ,SAY YOU MAKE A SOLUTION?
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
When you try to unlock did you use HARDSPL from cmonex? Is the SPL SPL-v1.10.RP00 the ORIGINAL spl of the phone?
** If you DID NOT use HARDSPL YOU WILL GET Level=FF.
** HARDSPL is available here: http://forum.xda-developers.com/showthread.php?t=316846
Just retry HARDSPL. When you gst to boot loader you should see olipro SPL.
If I understand correctly, you made a mistake by not changing SPL in first case. It is not clear what you did to 'unlock" the phone...like you said in the first post what did you do for unlocking? How did you unlock?
The best unlock is HARDSPL>>>
yes,i make procedure but in the end athena is blocked,with up writing,now not run ,only reset and bootloader,do not have SPL 1.20 olipro ,not have MAC ,if i writing new ROM also original ,reply "invalid vendor".
Now i make AthenaWrapper but end write this"
ERROR 300 INVALID UPDATE TOOL.
tnx
What ROM are you trying to flash? I think since it still has the ORIGINAL SPL it will take only the original HTC ROM? Did you try that?
Try this other unlocker also ....it is here: http://forum.xda-developers.com/showthread.php?t=315831
Also, I need some way to text you better than this .....otherwise I can only give one suggestion per day !!!!
x7500
please i have the same problem.
but when a type this Inbs filename.bin 75108000 what must i do after that?
my athena caracteristic are:
ATHE100
IPL-v2.02
ATHE100
SPL-v1.20.Olipro
thank you
try flashing an spl 1.2 rom
readthe guide
http://forum.xda-developers.com/showthread.php?t=429013