I have an imate ppc i some how wiped out my copy of windows 2003. I have another copy of the rom. but cant seem to get past the checking information on your pocket pc screen, from there it just falls over and wont go any futher than the ERROR 101: connection error, i have the ppc coneected via a usb connection. the pocket PC says USB at the top of the screen and v1.06 at the bottom.
I would appreciate any help.
Cheers
Sam
marsam said:
I have an imate ppc i some how wiped out my copy of windows 2003. I have another copy of the rom. but cant seem to get past the checking information on your pocket pc screen, from there it just falls over and wont go any futher than the ERROR 101: connection error, i have the ppc coneected via a usb connection. the pocket PC says USB at the top of the screen and v1.06 at the bottom.
I would appreciate any help.
Cheers
Sam
Click to expand...
Click to collapse
You are in the bootloader mode. just disable the usb connection, connect the device (in bootloader mode) and execute the upgrade utility. You are more likely to succeed when you upgrade in bootloader mode.
Related
Hi,
I have been upgrading to my 2.06.00WWE to 1.60a wm2k5 But when i connected and run bootloader mode and trying to run HimaUpgradeUt.exe or himaupgradeut_noID.exe was crashing or bootloader mode writings was dissappear so It says "101 communication error" so I put the HimaClearJumpCode.exe and run HimaUpgradeUt without bootloader mode when my Himalaya was runing it started and it run to just "removing your old rom" ad then it crashed again when I tried to restart my pocketpc It stuck to bootloader mode again and again.
I tried my old rom to upgrade but the same thing happens as bootloader screen writings disappear or crushings occur.I have an Tmobile mda.Thanks nad please help
I also tried to run himaupgradeut_noID.exe and when this bootloader writings disappear I disconnet it and open in bootloader mode to return writings and connect it to cradle again.Everything goes ok but when It comes to deleting and writing stage It gives me some error ocured and does not say which error is because there is blank
i would try using another pc
try using another pc that can be a error in windows
and do you have power aplied tothe xda when update?
I tried on my friends laptop win xp with sp2 and yes i applied the power to the cradle.. but it doesnt seem to work... bootloader mode shuts itself off when i start the HimaUpgradeUt.exe then it (the exe) crushes.
Zool said:
I tried on my friends laptop win xp with sp2 and yes i applied the power to the cradle.. but it doesnt seem to work... bootloader mode shuts itself off when i start the HimaUpgradeUt.exe then it (the exe) crushes.
Click to expand...
Click to collapse
The blank screen is normal. The display will return as soon as you confirm upgrade on PC screen prompt & it starts erasing the PPC ROM.
Have you tried waiting 'long enough' (at least 2 minutes) before the upgrade prompt confirmation displays in your PC?
When you said 'crashes' which one the PC or the PPC? Any message in your PC/Laptop? Have you installed Active Sync Version 4? Have you gone through with the Magneto Upgrade 'sticky' of XdaIIJojo & check for the prerequisites in upgrading?
Pls. check those 1st!
HimaUpgradeUt.exe crashes.Pc or PPC does not crash.I cant try it because of HimaUpgradeUt.exe crashes even ActiveSync 4.0 and says;
AppName: himaupgradeut.exe AppVer: 1.2.0.0 ModName: himaupgradeut.exe
ModVer: 1.2.0.0 Offset: 00010ed9
I have tried 3 different computer but the same HimaUpgradeUt.exe crashes.
I cant go on Magneto Upgrade 'sticky' of XdaIIJojo & because on this thread there is just a big picture.
Sorry to disappoint you Zool but, my setup is O2 Xda II & there could be some difference with your T.Mobile MDA.
Isnt there any other option ?
Apologies but have scoured all the threads and cannot seem to get to a straight answer!
Have a tocuh-dual which I attempted to update to the latest ROM from HTC and now I have the "tri-colour screen of death!) and can get no further,
The screen shows in thered band - RUUNBH | NIKI100 | SPL-1.16.0000 | CPLD-4. The white band shows "serial" and when I connect the USB lead it shows "USB".
But the PC does not recognise it at all and when I try to load a ROM or run MTTY nothing is found. How can I run a program on the touch if the PC will noit see it through the USB connection?
Any ideas?
Does your PC have active Sync installed? I had a similar problem when I installed a broken rom that would not boot up. I did a device reset using the stylus in the whole next to the USB, while holding the camera and power button to boot into the tri color screen. Once hear i plugged in my USB cable and ran a ROM install.
I hope this helps.
uncheck allow usb-connection in Active Sync
run mtty connect by USB
type "boot" without quotes.
same problem
i have got the same problem and can't get out of the tri-colour.
I try to connect with mtty and it says usb port cannot open. my pc can recognise it and in da phone it shows usb though, i don't really know why its not taking. if i type "boot" in mtty what will happen? cos when i click on com3 its opening but when i write "boot" nothing happening even with boot. any ideas guys? how to solve the problem????
Regards
u have to unckeck allow usb connection in active sync! then u can connect with mtty
Just one point - I am using Vista which does not use Activesync but Sync Centre and that does not give you the option to disable as far as I can see?
use xp
bodonline said:
Just one point - I am using Vista which does not use Activesync but Sync Centre and that does not give you the option to disable as far as I can see?
Click to expand...
Click to collapse
Use xp mate, cos vista has got some problems. normally for unlocking and upgrading i use xp. blow up the vista .
Regards
I will crank one up and let you know how it goes!
kill the task in the Task Manager... then u can connect with mtty
Tried killing the process but MTTY still says "USB port cannot open" - no idea what else to do?
If any Program use the USB Port ... no other Program can use the USB at the same time!
Today I decided to download the most recent ROM for my Mogul.
As the update for the ROM image started, it got to around 5% and then it told me there was an error (forgot which one it was). I followed the directions of doing the soft reset, and it was successful. Thought everything will run smoothly from there, then I got the Error 320: This Update Utility cannot be used for your PDA Phone.
Now i'm trying to do this
P: My device is stuck at the Red, Blue and Green Screen?
S: 1. To exit the bootloader, press the reset.
2. Connect your Titan to your PC's USB and then on your PC execute titan_excitbl.exe
3. You may need to reflash the Radio/Operating system ROM
When I run the .exe it says, "Cannot open USB port. Please make sure, that USB connection in ActiveSync is disabled. Also make sure, that your USB cable is properly connected."
I'm running Vista, so I went to disable USB connection on Windows Mobile Device Center, but still no luck..
The information on my Mogul's screen is:
RUUNBH on the top right hand corner.
and then..
TITA101
SPL-2.07.0000
CPLD-9
Help is much appreciated. Thanks
edit
Oddly, I clicked "run" instead of saving the .exe to my harddrive, and it successfully downloaded.
Now I have a problem with sending text messages... I get code 64.
I am trying to flash from the bootloader to recover from an installation error on my Fuze. I've entered into the tricolor bootloader screen by holding down Vol.down and reset. Now, when I plug the phone into the computer, the computer recognize the phone as a Qaulcomm CDMA Technologies MSM, and is trying to install a driver for it (which it cannot find.) When I run the Custom_RUU, it does not find my Fuze and is showing a ERROR[260]: Connection.
What am I doing wrong? Do I need to find a driver for Qualcomm first? I searched, and it seemed that when you enter bootloader to flash, it is suppose to say USB at the bottom. Mine says Serial. Does that matter?
If more information is needed to troubleshoot:
SPL is SPL-1.90.OliNex
Phone is unlocked by using Olinex's unlocker
Rom was EnergyRom 3.0 Phoenix 51909
Problem was caused because I tried to install Studio Kuma Traditional Chinese Fonts on it. That program works flawlessly on a WM6.1. Of course, Energy 3.0 are WM6.5, hence causing the problem.
Any assistance is very appreciated.
Try sd card flashing
You have connect your device to your USB port and let it find the drivers. In order for it to download the drivers, you must have Activesync or Windows Mobile Device Center.
Once you have one of those downloaded, launch it and connect the device while it is running normally. Opt to connect via Activesync on your phone. You don't have to have these running in the future but you need it to find the drivers and install them. Leave the Activesync connection intact while you run the Flash program.
Once the phone reboots in bootloader mode, the PC will probably download some more drivers. The Flasher will probably time out while the drivers are being downloaded and installed. Keep trying.
Once the bootloader drivers are downloaded and installed, try to run the Flasher program again. Sometimes you'll need a reboot if something is hung up.
You SHOULD be able to reboot, put the phone in bootloader mode (Down + Power + Reset) and it should change "SERIAL" into "USB". Once it displays "USB" you are good to go. Load up the Flasher program and it should go all the way through without the assistance of ActiveSync or Mobile Device Center.
I always flash in bootloader mode, I just know the initial pairing is rough.
Well, I flashed from sd card, and the phone is working now. Thanks for everyone's replies.
While trying to install HSPL/RSPL in Mozart (as described in http://www.htc-developers.de/viewtopic.php?f=275&t=6159) first there was an error message. After that the connection between the phone & computer was disrupted. Now the computer cannot recognize the phone in the bootloader mode - i.e. there is no USB connection displayed on the screen. So the ROMUpdateUtility cannot access the phone at all. Is there any way to restore the USB connection in the bootloader mode?
Thanks a lot in advance.