please anyone in here help me for my x01ht
1. i flash with HER_DopodAsia_AUS_1[1].30.707.4_1.20.31.10_WWE_Ship.exe
2. when it flash until 14% , it stop
3. i plug out cable and restart phone , now phone only can go into bootloader mode
4. in bootloader mode , it show
HERM IPL-1.01
HERM SPL-1.06
5. now i flash whatever file into this phone , it will show invalid vender id
6. please teach me how to do now all master
thanks !
file i try to flash
-RUU_X01HT_1.33.761.4_1.14.00.10.exe
-RUU_Hermes_DopodAsia_AUS_1.30.707.8_1.27.30.10_WWE_SHIP.exe
-HER_DopodAsia_1237074_1060010_WWE_SHIP.exe
all not work , will show invalid vender id
check the two stickies in this forum - bricked device and free unlocker. If you can run the unlocker, it will SuperCID your phone, if you can get that far.
If not, check out the bricked device thread - lot's going on in there.
Also, have you tried putting the ROM back on that was there to start with? Inalid Vendor ID is a failed check by the phone to match Phone CID with ROM CID. If you didn't fry it out, then you whould be able to put the OLD ROM back on. If so, you have a little more work ahead of you.
no unlocker not work for me , please teach me step by step what should i do ... thanks for your help
hanyean1 said:
no unlocker not work for me , please teach me step by step what should i do ... thanks for your help
Click to expand...
Click to collapse
Shamelessly stolen from one of pof's recent posts but still applicable...
10 READ(wiki)
20 READ(Hermes->forums->stickies)
30 READ(Hermes->forums)
40 IF (Questions?) GOTO 10
50 FLASH(Hermes)
LOL
Closing this thread as he already posted here:
http://forum.xda-developers.com/showthread.php?t=286755
i saw lot of people have dead prophet problem, so i am here now to make a new thread to all this people and i hope to make it useful.
now we start
** FIRST : lets know names of prophet :
I mate Jamin, O2 XDA Neo, Qtek S200, Dopod 818 pro, Dopod 830, SPV M600, VPA Compact S.
** SECOND : we must know that before we trying to do any updating or change roms on my prophet i just need to do which called unlock for the prophet and then we after that been able to change any rom on my ( jamin ) and of course u need to be careful about Your device is it G4 or G3 ,
# and how we know its G4 Or G3 ?
# when u start Your Device u will see some numbers on left,
---------------------
IPL: 1.00.000
SPL: 2.20.000
GSM: 02.61.21
OS: 3.0.0.0
--------------------
and may be changed and that goes to the rom which You have, now we look for the last number on ( IPL and SPL ) , if we found it ( 0 ) it means You r G3 and if it ( 1 ) so You r G4 .
** THIRD : lets go to unlock , i will put programs in this thread it will help u in unlock.
-- Sync your device with computer and open the file u download it called HardSpl you will find two files one one foe G3 and G4 open your kind then you'll find a file called (( hardspl.bat )) okay, be sure your device is connected to computer then open the file and follow instruction and it will reset your device ,
now u ready to change rom.
TO BE CONTINUED
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
if any one can help please contact me.
hello
my device is jamin g4
it stopsat the boot loader and dono thing
can u help me please?
my e-mail is [email protected]
and suddenly after trying to update the spl been 1.01
please help me
can i fix it?
waiting for ur help
What is the IPL and SPL?
If the wiki where up, I'd suggest looking at that, but as it is I'll explain it now...
What ROM where you attempting to upgrade to?
To get the device back, I would say "Read the wiki" but it's down!!!
Download this ROM.
In ActiveSync, disable "connect through USB" (File->Connection Settings).
Put the device into bootloader (the three coloured screen) and connect it to the computer using the USB cable.
Run the file you downloaded earlier. This should then install a new ROM.
From there, just wait for it to finish.
Now, it should work!
From there, you could re install the Orange WM5 ROM, or try upgrading to WM6. Make sure you read all the relevant guides first!
thanks alot i did as u said but it stops at 80% or 88%
then show this message (error 326 invalid command )
please help me
i'm feeling bad
my mail is [email protected]
What brand the device? Has it been SIM unlocked?
hi again brothers, pal zerocool. first u must unlock ur device to be able to accept any rom after that and solve pproblems.
first flash this rom its offecial and it solve dead prophet problems.
then make hard spl by program open file called hardspl.bat.
make hard reset.
flash ur rom u want.
make hard reset again.
then enjoy.
i uploaded the hardspl program but i couldnt upload the rom its so big so u can look in ur mail u will find the solution.
u can extract file by any program for zip.and tell me the news
dont forget to look to ur mail. see all of u later
Dead prophet
Hi guys,
I have been using a sh... Nokia sine I broke my prophet G4 in december by upgrading the OS.
I had downgraded first to NVID and then I tried to upgrade and it fails at 95%.
Sine this day, my prophet seem totally dead, no light when plug on both charger or computer, windows do not recognize at all the device because it is turned off. And it really do not seem to charge...
I am living in China now and a guy told me I had to change the PB board...The ost is 100Euros, but I am almost sure I an find another solution...
The weird thing is I cannot charge it at all ( I mean no lights but does it charge a little?).
The guy tested my prophet with another battery and in that ase, it is stuck on the bootloader.
We tried several roms and it always fails at 95% and the error is 200 something, maybe 245 or 243, I do not remember sorry...
Is my phone hardware is dead? or it is just a software problem and I did not see the right guy?
Do I need to buy a new battery? I have read that sometimes the device is not able to recognize it even if it the offiial one and even if it is working on another device...
PLease help me I don't want to loose this phone that I've been using for almost 3 years...
Otherwise I will switch to an iphone but I am not sure to be as happy than I was with my prophet.
Xie Xie for your advice and answers.
Guilh1
Can it enter bootloader at all?
If yes, what are the IPL and SPL?
If not, it will be a hardware problem (may just be connectors to the battery but may be something more).
the only way of recovery is using jtag
but 1st we must discover the location of jtag pins on motherboard
I just do not know because with my actual battery, anything is possible....
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
I may be right about the battery onnectors though, but the problems seem to be from the phone connectors or the battery it self???
Thank you anyway for your very quick reply
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
Click to expand...
Click to collapse
If it can enter bootloader, it is almost certainly your battery at fault!
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/B] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
Click to expand...
Click to collapse
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/b] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Click to expand...
Click to collapse
Please look at this if you want more help, post here...
thanks alot dear samuraititio
but i can't flash it
it writes (no vender id)
help me please i tried another tool with the same nbf file it stops at 80%
and it automatically enter the boot loader
and i can't do ant thing
its information
jamin/g4
ipl 2.13.0001
spl 1.01
i think my problem is in the spl coz it was 2.13.0001
and now it's 1.01
how can i fix it please i still starter in this way so i'm trying;
help soon please
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
l3v5y said:
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
Please look at this if you want more help, post here...
Click to expand...
Click to collapse
hello pal i3v5y
i have the same problem
idid what u said the flashing stops at 80%
i need ur help please
i'm online at the moment and u too help me soon if u can please
my e-mail is [email protected]
waiting for u i don't have any other device to use and i need it
l3v5y said:
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
Click to expand...
Click to collapse
now i flashed the official rom of jamin but it stopped at 80%
i tried to flash rom and now goes only in boodloader mode, nowhere else
now the ONBL is 1.07.0000 and SPL is 1.07.0000
S/N : SZ7************* A
so is my phone dead?
can anyone pls advise wat i should do?
Thanks in advance.. your help is very much appreciated
ps: i still can enter bootloader
^^ Read this:
http://forum.xda-developers.com/showthread.php?t=472169
thanks, but ive already done this and at the final step, when i try to flash the rom i take "ERROR [300] - Get a newer rom update utility."
is there any newer rom update utility???
where can I find that?
thanks for helping!
any body please help e j have flash my gene with ruu_gene_htc_asia_india_1.17.720.1_4.1.13.34_02.7.9.90 ship exe and after100% my phone is not getting on
any bodyplease helpme how can i enter in boot mode
Did you read this
To enter boot loader mode, press and hold the camera key and press reset.
sir thanks for repy i have never read your post before that and did the same mistake i have flashed with the wrong file and now my habdset in not going in boot mode too
thank you
please help me out what shopuld i do
kripalu said:
sir thanks for repy i have never read your post before that and did the same mistake i have flashed with the wrong file and now my habdset in not going in boot mode too
thank you
please help me out what shopuld i do
Click to expand...
Click to collapse
HTC SERVICE CENTER
if it is in warranty period ..no BUCKS!!!
kripalu said:
sir thanks for repy i have never read your post before that and did the same mistake i have flashed with the wrong file and now my habdset in not going in boot mode too
thank you
please help me out what shopuld i do
Click to expand...
Click to collapse
Before taking it to service center, you may give a last try by pressing and holding camera and power buttons and then using stylus to reset the phone. That had worked for me.
Gene100 problem
Hi Member's...
Having Gene 100
In boot Loader Mode is showing
ONBL 1.07.0000
SPL 1.07.0000
while starting in soft reset mode It shows Htc spash screen with
ONBL 1.07.0000
SPL 1.07.0000
GSM 02.71.90
i goes blink...
well tried to update the rom with "P3400 - 24 March 2007.exe(HTC_wwe)
getting update successfully, but still in same problem..
nothing get changes...
pls help me out...
thanks a lot....
I will try to explian what i did , and if u can hlp me pls .. I buy htc evo 3d from some guy on internet , phone was perfect evrything was wokring till 2 monts after i try to start wifi he write error , then i try to put new android rom on phone .. And i must say i am noob in all of this , so i try this thing 1st
1. Through fastboot. Open the command prompt, connect your device by USB cable, check USB debugging is enabled. and enter the following code
Code:
adb reboot bootloader
wait till your device enters bootloader and shows fastboot USB, now enter the following code.
a. For unbranded devices.
Code:
fastboot oem writecid HTC__001
fastboot oem lock
fastboot oem reboot bootloader
Please note that in the cid there are 2 underscores before 001.
b. For branded devices such as Vodafone.
Code:
fastboot oem writecid VODAP001
fastboot oem lock
fastboot reboot bootloader
You can even change that CID to HTC__001.
Once you have achieved S-OFF you can change your cid back to original.
Click to expand...
Click to collapse
After this from ****Unlocked***** now i have this *****RELOCAKED****** Security Warning !!!
Now i can't use recovery , but before i was easly in recovery with one click (clockwordmod) , now i can't join in recovery!
On my screen i have this :
****RELOCATED*****
****Security Warning****
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.007
Radio-11.25.3504.06_m
OpenDSP-v02.6.0.2226.00.0202
eMMC-boot
May 22.2012.01:06:07
Click to expand...
Click to collapse
Before all this i tryed to install http://forum.xda-developers.com/showthread.php?t=1277431 so i wipe evrything and format evrything so now i dont have backup or some other os , now i am stuck at bootloader and i can't fix , PLS HLP ME TO FIX THIS I DONT HAVE money to pay in service .. Pls hlp , sry for my crapy eng. i am trying rly hard!
TNX
saky90 said:
I will try to explian what i did , and if u can hlp me pls .. I buy htc evo 3d from some guy on internet , phone was perfect evrything was wokring till 2 monts after i try to start wifi he write error , then i try to put new android rom on phone .. And i must say i am noob in all of this , so i try this thing 1st
After this from ****Unlocked***** now i have this *****RELOCAKED****** Security Warning !!!
Now i can't use recovery , but before i was easly in recovery with one click (clockwordmod) , now i can't join in recovery!
On my screen i have this :
Before all this i tryed to install http://forum.xda-developers.com/showthread.php?t=1277431 so i wipe evrything and format evrything so now i dont have backup or some other os , now i am stuck at bootloader and i can't fix , PLS HLP ME TO FIX THIS I DONT HAVE money to pay in service .. Pls hlp , sry for my crapy eng. i am trying rly hard!
TNX
Click to expand...
Click to collapse
Guys can some1 hlp me with this problem? Can i install any normal android right now? Some simple way , just to turn on phone so i can use !?
saky90 said:
Guys can some1 hlp me with this problem? Can i install any normal android right now? Some simple way , just to turn on phone so i can use !?
Click to expand...
Click to collapse
Hey just calm down, I had the same problem. And i cant return to stock etc. So were stuck with rooted evos
Firstly to solve your recovery problem you'll have to re unlock your bootloader. NOTE you might have to reflash recovery
That's it really, I take it you'll know what to do from there... Such as the possibility of flashing a rom
Say thanks if I helped at all
Just send me a message if you ever need anymore help
saky90 said:
Guys can some1 hlp me with this problem? Can i install any normal android right now? Some simple way , just to turn on phone so i can use !?
Click to expand...
Click to collapse
Just simply flash original ICS ruu file from here http://www.androidfiles.org/ruu/?dir=Shooter
run on pc and folow steps.