Related
i saw lot of people have dead prophet problem, so i am here now to make a new thread to all this people and i hope to make it useful.
now we start
** FIRST : lets know names of prophet :
I mate Jamin, O2 XDA Neo, Qtek S200, Dopod 818 pro, Dopod 830, SPV M600, VPA Compact S.
** SECOND : we must know that before we trying to do any updating or change roms on my prophet i just need to do which called unlock for the prophet and then we after that been able to change any rom on my ( jamin ) and of course u need to be careful about Your device is it G4 or G3 ,
# and how we know its G4 Or G3 ?
# when u start Your Device u will see some numbers on left,
---------------------
IPL: 1.00.000
SPL: 2.20.000
GSM: 02.61.21
OS: 3.0.0.0
--------------------
and may be changed and that goes to the rom which You have, now we look for the last number on ( IPL and SPL ) , if we found it ( 0 ) it means You r G3 and if it ( 1 ) so You r G4 .
** THIRD : lets go to unlock , i will put programs in this thread it will help u in unlock.
-- Sync your device with computer and open the file u download it called HardSpl you will find two files one one foe G3 and G4 open your kind then you'll find a file called (( hardspl.bat )) okay, be sure your device is connected to computer then open the file and follow instruction and it will reset your device ,
now u ready to change rom.
TO BE CONTINUED
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
hey guys
i tried to attachment the file now put it gives me database problem, so i will be after it to attach don't worry pals. see you later.
if any one can help please contact me.
hello
my device is jamin g4
it stopsat the boot loader and dono thing
can u help me please?
my e-mail is [email protected]
and suddenly after trying to update the spl been 1.01
please help me
can i fix it?
waiting for ur help
What is the IPL and SPL?
If the wiki where up, I'd suggest looking at that, but as it is I'll explain it now...
What ROM where you attempting to upgrade to?
To get the device back, I would say "Read the wiki" but it's down!!!
Download this ROM.
In ActiveSync, disable "connect through USB" (File->Connection Settings).
Put the device into bootloader (the three coloured screen) and connect it to the computer using the USB cable.
Run the file you downloaded earlier. This should then install a new ROM.
From there, just wait for it to finish.
Now, it should work!
From there, you could re install the Orange WM5 ROM, or try upgrading to WM6. Make sure you read all the relevant guides first!
thanks alot i did as u said but it stops at 80% or 88%
then show this message (error 326 invalid command )
please help me
i'm feeling bad
my mail is [email protected]
What brand the device? Has it been SIM unlocked?
hi again brothers, pal zerocool. first u must unlock ur device to be able to accept any rom after that and solve pproblems.
first flash this rom its offecial and it solve dead prophet problems.
then make hard spl by program open file called hardspl.bat.
make hard reset.
flash ur rom u want.
make hard reset again.
then enjoy.
i uploaded the hardspl program but i couldnt upload the rom its so big so u can look in ur mail u will find the solution.
u can extract file by any program for zip.and tell me the news
dont forget to look to ur mail. see all of u later
Dead prophet
Hi guys,
I have been using a sh... Nokia sine I broke my prophet G4 in december by upgrading the OS.
I had downgraded first to NVID and then I tried to upgrade and it fails at 95%.
Sine this day, my prophet seem totally dead, no light when plug on both charger or computer, windows do not recognize at all the device because it is turned off. And it really do not seem to charge...
I am living in China now and a guy told me I had to change the PB board...The ost is 100Euros, but I am almost sure I an find another solution...
The weird thing is I cannot charge it at all ( I mean no lights but does it charge a little?).
The guy tested my prophet with another battery and in that ase, it is stuck on the bootloader.
We tried several roms and it always fails at 95% and the error is 200 something, maybe 245 or 243, I do not remember sorry...
Is my phone hardware is dead? or it is just a software problem and I did not see the right guy?
Do I need to buy a new battery? I have read that sometimes the device is not able to recognize it even if it the offiial one and even if it is working on another device...
PLease help me I don't want to loose this phone that I've been using for almost 3 years...
Otherwise I will switch to an iphone but I am not sure to be as happy than I was with my prophet.
Xie Xie for your advice and answers.
Guilh1
Can it enter bootloader at all?
If yes, what are the IPL and SPL?
If not, it will be a hardware problem (may just be connectors to the battery but may be something more).
the only way of recovery is using jtag
but 1st we must discover the location of jtag pins on motherboard
I just do not know because with my actual battery, anything is possible....
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
I may be right about the battery onnectors though, but the problems seem to be from the phone connectors or the battery it self???
Thank you anyway for your very quick reply
when I tried with the guy and a new battery it was blocked on the bootloader, but don't remember the IPL and SPL...sorry
Click to expand...
Click to collapse
If it can enter bootloader, it is almost certainly your battery at fault!
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/B] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Ok so i burnt my battery during the upgrade...
But why is it still blocking at 95% when he tried to put a rom?
With his battery, it was stuck on the bootloader and not possible to install a rom, even a NVID WM5...
I really do not know what to do...
Thanks again for your help
Click to expand...
Click to collapse
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
My iMate JAMin is dead; I was in the middle of flashing it when it froze, now when I turn it on, I get the Tri-color screen with the following ...
IPL: 2.13.0001
SPL: 2.13.0001
No [BUSB[/b] is detected. So now I need a way to flash it from the SD Card. I can not even see the HTC startup screen anymore, it just jumps directly into the tri-color screen.
Click to expand...
Click to collapse
Please look at this if you want more help, post here...
thanks alot dear samuraititio
but i can't flash it
it writes (no vender id)
help me please i tried another tool with the same nbf file it stops at 80%
and it automatically enter the boot loader
and i can't do ant thing
its information
jamin/g4
ipl 2.13.0001
spl 1.01
i think my problem is in the spl coz it was 2.13.0001
and now it's 1.01
how can i fix it please i still starter in this way so i'm trying;
help soon please
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
l3v5y said:
Do you know which ROM? Is your device branded, and is it SIM locked?
Do you know the IPL/SPL? Did they end with the same numbers?
Please look at this if you want more help, post here...
Click to expand...
Click to collapse
hello pal i3v5y
i have the same problem
idid what u said the flashing stops at 80%
i need ur help please
i'm online at the moment and u too help me soon if u can please
my e-mail is [email protected]
waiting for u i don't have any other device to use and i need it
l3v5y said:
You now have a G3 SPL on a G4 Device.
What did you flash exactly?
Click to expand...
Click to collapse
now i flashed the official rom of jamin but it stopped at 80%
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
dahdout said:
So i wanted to flash my cingular 8125 to windows mobile 6, so i downloaded this:
(BIG MISTAKE)
http://www.tradebit.com/filedetail.php/2559279-Software-Programs-Cell-Phone-Programs
and i followed the instructions and after i hard reseted my phone, it booted to a white screen. I have tryed reflashing, going into bootloader mode and reflashing, and i nothing helps.
can one of the experts on this forum please help me???!!!
thanks
i need help assap!! lol
i dont care even if i flash back to winmo5, I JUST WANNA UNBRICK
Click to expand...
Click to collapse
What IPL/SPL it displays now ? ,Does it get into Bootloaders ? if it still does than download and flash 'wizard_love_rom' hope it'll recover back.
RE:
It just boots into a white screen. If i hold the camera and power buttons together it boots into bootloader mode, and says USB in the bottom corner. (when i am conncected via usb) but the problem is that active sync doesnt recognize it in bootloader mode. I have tried flashing it in many different ways and i have had no success.
When i go home i will try wizard_love_rom.
and as for the IPL/SPL, i will also check that when i get home.
Where can i download the wizard_love_rom?
Thanks for the help !
RE:2
Hello,
Mr IPL and SPL are both 2.25.0001
My GSM: 02.25.11
My OS: 2.18.0.0
Good News
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
dahdout said:
So, I flashed my phone with the "Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar"
which i found the download for over a quick google search, and now i want to update to winmo6 or 6.1.
Can you send me the link for the easiest way to do it on a G4 cingular 8125 (HTC Wizard.)
I have never CID unlocked, which was probably why i got the white screen earlier. but do i need to do it know that i am on the wizard love rom?
please help,
thanks
Click to expand...
Click to collapse
Glade its working again !
You got a G4 device,it cannot be CID unlocked,but however,it can be upgraded to wm6 or 6.1,read the methods 'HardSPL' or 'SoftSPL' posted as stickies in the G4 forum for upgrading to wm6 or 6.1.
re:3
thanks, you really saved me with your help!
dahdout said:
thanks, you really saved me with your help!
Click to expand...
Click to collapse
Thanks !
Glade you got it working
sorry, but i need help... again
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
dahdout said:
Ok,
I know that this may be getting a little annoying for you and im sorry for that, but i need your help on this. I am currently running the wizard love rom. And I have Hard SCP'd.
I have to problems:
1. My EDGE doesn't work, i only get GPRS speed data.
2. I can't upgrade to any new rom..... i always get "ERROR [300] Get a newer update utility!"
How can I fix both of these problems?
I have searched forums and google and nothing has come up.
Click to expand...
Click to collapse
ok,for error (300)you can use the RUU MUNS already posted in the 'HardSPL' thread,download the RUU_MUNS application extract it to a folder and copy and paste all the files of this extracted to the folder of the Rom replacing all the RUU files in that folder or copy the nk.nbf folder in the Rom to the extracted folder of the RUU_MUNS and then run the RUU,it will start to flash and complete and hopefully fully boot up.
For edge or gprs,you'll have to get network settings of your network carrier or check out the thread from where you downloaded the rom,its uaually posted there or check out the 'Network' thread.
Aquestion to Zabardast_1 ?
294 error , invalid vender ID
what does that means & asolution to it during rom update
ERROR [294] : INVALID VENDER ID
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Hi guys,
I need your help. You'd make me amazingly happy if you could solve my problem.
I have an Orange SPV C100 (french one) and I keep trying to flash wm6.1 (the one Blackdragon_860 has released).
My problem is : I can't flash that rom. The updating process crash at 4% and I get an error saying that the ROM is corrupted.
Do you have any ideas to help me ?
Here are some additional information taken from the Hard-SPL And Soft-Spl walktrough :
1. Copy spl.nb, spl.lnk and jumpspl.exe to the root of device
Click to expand...
Click to collapse
I've done that alright
, hold camera and launch spl.lnk -
Click to expand...
Click to collapse
I've done that too.
you`ll see the white screen
Click to expand...
Click to collapse
I have no white screen. Instead a file named JumpSPL.txt is generated... Here is what is inside :
-----------------------
Comandline is: 0x10000000 \SPL.nb
SPL File: \SPL.nb
Jump Address: 0x10000000
kmode is 0
SPL file size: 524288 bytes
3. From the flasher folder run ROMUpdateUtility.exe and follow instructions to flash the Hard-SPL if needed. or you can flash *ANY* oxygen rom
Click to expand...
Click to collapse
I've done that too. I put RUU_Signed.nbh from wm61OxygenUpdate1.rar in the same directory than ROMUpdateUtility.exe
Before the flashing process itself, ROMUpdateUtility.exe tell me I going to flash the image version from 1.7.74.1 to : 1.01
Then I have a rainbow screen which says :
ONBL : 1.07.0000
SPL : 1.07.0000
Oxygen : IU
The flashing process start, then crash and 4%... Saying that image file corrupted.
One last information :
I got the same error with other ROMS. Here the list of what I already tried :
Blackdragon_860's rom, released the 11-05-2008
Standard rom, the one that comes with Soft and Hard SPL (weight about 641Ko)
A Russian rom, taken today from zfree (here)
I didn't tried the chinese one. But as edgeofthestring has eventually the same problem than mine, I not will go for this rom.
I tried to be as complete as possible... I truely need some help.
Plz plz plz hrlp.
Thx
Guigoui
Try first flashing this rom:
http://www.megaupload.com/nl/?d=6B0FDY24
After this hard-spl and than flash any rom you like
Always use rom loader from hard-spl and before flashing rename rom to RUU_Signed.nbh
i also tried to flash the file posted by you but after 4 % the phone reboots and the setup gives me the: " invaliv vendor id " message
Default
ok. may it works when you do it like this:
1. restart your phone
2. Copy spl.nb, spl.lnk and jumpspl.exe to the root of device
3. restart phone, don't connect to your PC!
4. open total commander, hold camera button and launch spl.lnk
5. Do you see a white screen? if yes proceed if not it has no
point proceeding, flashing will fail anyway!
6. Now connect your phone to your pc using the usb cable
7. From the flasher folder run ROMUpdateUtility.exe and follow
instructions to flash the Hard-SPL
8. After flashing Hard-Spl, to avoid reflashing, use always use
flasher from hard spl and rename the desired rom to flash to
RUU_signed.nbh
Hope this will finaly work for you!
i have tried it, i have the wm6.1 chinese version rom and the hard spl is not working at all in this rom, i have tried it with total commander and after the white screen appears and i connect the phone to the pc it is nor recognized by the pc...
thx nemphis for helping me... but it just don't work.
Believe me I'm not numb. I can read and use my little brain... I think I tried everything (including throwing my device to the other side of my room). There is something that keep my device from displaying this f*****g white screen.
Just for the record, I repeat, I have a french blocked orange C100...
If someone has got in the same problem and finally sorted it out, plz share how.
Nemphis, thx again but I doubt I will ever have wm6.1... Anyway I give up, so I guess I will never have wm6.1...
By the way, I also tried the rom you advised but as you so rightly said "if not it has no point proceeding, flashing will fail anyway!".
Thx you all...
c u...
by by
Is your phone sim unlocked also?
When reading through these forums there also are people saying you still need this: http://www.imei-check.co.uk/
Or ask your operator for the sim unlock code, they should give it when your phone is more than 1 year old.....
Phone simunlocked today... gonna try again tonight... Hope it will eventually work this time... Last hope anyway...
guigoui said:
Phone simunlocked today... gonna try again tonight... Hope it will eventually work this time... Last hope anyway...
Click to expand...
Click to collapse
Was your phone "app unlocked" before begining ? I would assume it is necessary, but won't pretend I'm a guru...
Christophe - Lyon - France
@guigoui :
I had this same, white screen didnt appeared .. but after unlocking using this way: http://rapidshare.com/files/105133496/Unlock_HTC.rar.html you'll see it (after runing SPL.lnk with camera button pressed) all is working !!!
I've WM6.1 !!!
Thanks!
This sounds pretty good vovakk... I'll test your file tonight (because I had no white screen after having my device simunlocked)
I can't to stand waiting until tonight...
It WORKED !!!! Now I have WM6.1 !!!
Ok so here are some additional information that could be useful.
Be sure you have .net framework 2.0 or newer before starting the unlocking process (the file shared shared by vovakk) otherwise you would be stuck at the second step.
When at step 5, I'm not sure which profile is required but, for me, it worked with "No security".
Once you've done step 5, you'll get THE white screen when laucnhing SPL.Ink (I confirm). You can start flashing.
I've flashed several rom as nemphis told me to, and it worked. Here is the list in the right order, with some notes :
1. http://www.megaupload.com/nl/?d=6B0FDY24 (given by nemhpis) : takes about 2-3 minutes, when done, I believed that my device was dead because it took a while before the PIN screen showed. Don't panic, just wait.
2. http://rapidshare.com/files/65732449/hspl.7z.html (the original Hard-Soft SPL - created by sp3dev) : extract, don't change anything, just launch RomUpdateUtility.exe. Flashing process takes less than 1 second
3. http://rapidshare.com/files/114457795/wm61OxygenUpdate1.rar (THE Windows Mobile 6.1) : In the RomUpdateUtility.exe folder, just replace the original NUU_signed.nbh by the one inside wm61OxygenUpdate1.rar. Launch RomUpdateUtility.exe. Eveything else is like 1. except that my device rebooted fast without being stuck a while on the windows mobile logo screen. The device reboot, you enter your PIN and then welcome to WM6.1 !
Hope someone would find interesting to read my so long posts...
I thank you all for your patience and help... I wouldn't be able to do it by myself.
C you
hey GuiGoui can you upload this file here or Rapidshare please. Megaupload is way tooooo slow. RUU_OxygenWM5_1.5.401.2_R3_4.1.13.28_02.67.90_HTC_EUR_Test.exe
thanks
I can't.... 8Mo limited...
guigoui said:
It WORKED !!!! Now I have WM6.1 !!!
Ok so here are some additional information that could be useful.
Be sure you have .net framework 2.0 or newer before starting the unlocking process (the file shared shared by vovakk) otherwise you would be stuck at the second step.
When at step 5, I'm not sure which profile is required but, for me, it worked with "No security".
Once you've done step 5, you'll get THE white screen when laucnhing SPL.Ink (I confirm). You can start flashing.
I've flashed several rom as nemphis told me to, and it worked. Here is the list in the right order, with some notes :
1. http://www.megaupload.com/nl/?d=6B0FDY24 (given by nemhpis) : takes about 2-3 minutes, when done, I believed that my device was dead because it took a while before the PIN screen showed. Don't panic, just wait.
2. http://rapidshare.com/files/65732449/hspl.7z.html (the original Hard-Soft SPL - created by sp3dev) : extract, don't change anything, just launch RomUpdateUtility.exe. Flashing process takes less than 1 second
3. http://rapidshare.com/files/114457795/wm61OxygenUpdate1.rar (THE Windows Mobile 6.1) : In the RomUpdateUtility.exe folder, just replace the original NUU_signed.nbh by the one inside wm61OxygenUpdate1.rar. Launch RomUpdateUtility.exe. Eveything else is like 1. except that my device rebooted fast without being stuck a while on the windows mobile logo screen. The device reboot, you enter your PIN and then welcome to WM6.1 !
Hope someone would find interesting to read my so long posts...
I thank you all for your patience and help... I wouldn't be able to do it by myself.
C you
Click to expand...
Click to collapse
How did it work............ i ended up lockin my phone it was unlocked before... now no application works... anymore it say this application is not have signed certificates..... PLZ ANY1 HELP I DONT EVEN KNOW HOW TO HARD BOOT THIS HANDSET..... I NEED URGENT HELP PLZZZZZZZZZZZZZ...
anyone know what rom is compatible with athe100 SPL 1.10 ?
i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?
cowballz69 said:
anyone know what rom is compatible with athe100 SPL 1.10 ?
i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?
Click to expand...
Click to collapse
Have you took the sim card and memory card out?????
Jay
yes they are both out when tryign to flash, been over a week with out a working athena
cowballz69 said:
yes they are both out when tryign to flash, been over a week with out a working athena
Click to expand...
Click to collapse
try flashing your original ROM which should be found in the wiki section.
ignore what I said below and report back if you were able to load your original ROM
***Ignore this read above**Once your phone is working , do the athena wrapper which should load SPL 1.2
Also read this
http://forum.xda-developers.com/showthread.php?t=429013
yes I tryed to flash the original rom (its a wm5 i beleive to), still gets error after 1%,, downloaded both on the wiki and the ftp site, =\ been over a week so far no clues on why i cant flash, i even tryed to change the mac address using mtty, but instead of going into level = 0 , i get level = FF witch means the phone is locked out from flashing anything threw mtty,
thank u guys so much for responding on my issue
I also tryed doing the unlocker and its a no go
If the error when it stops at 1% is "invalid model id" the solution is here http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
cowballz69 said:
yes I tryed to flash the original rom (its a wm5 i beleive to), still gets error after 1%,, downloaded both on the wiki and the ftp site, =\ been over a week so far no clues on why i cant flash, i even tryed to change the mac address using mtty, but instead of going into level = 0 , i get level = FF witch means the phone is locked out from flashing anything threw mtty,
thank u guys so much for responding on my issue
I also tryed doing the unlocker and its a no go
Click to expand...
Click to collapse
I think this means your phone is not unlocked
with respect to sergiopi , you cant do the mtty script.
I would suggest you msg cmonex or try to talk to her on IRC on the
dxa-devs channel
addendum
seeing that you have nothing to lose, why dont you try flashing the original rom from the sd card using the method in the wiki
cowballz69 said:
anyone know what rom is compatible with athe100 SPL 1.10 ?
i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?
Click to expand...
Click to collapse
I have the same problem.
what I do...
I have ameo t-mobile...windows mobile 5.0
run AthenaUnlocker
Step 1 make all finish noc problem
Step 2 hung up on 60 %
bootloader no problem....but can´t flash original flash always stuck at 1% and reboot...
flashing the original rom from the sd card using the method in the wiki ...
make it, but no do...on screen see
cheking...
loading....
than come on screen
0002802
ching...
loading...
not allowed
sergiopi said:
If the error when it stops at 1% is "invalid model id" the solution is here http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
Click to expand...
Click to collapse
My error when it stops at 1% is "invalid vender id"
my image version is demaged
Re: Ameo from t-Mobile german - repair
________________________________________
hi
what is your CID? use mtty command "info 2" to find out.
for example, if it is TMOB_007, you have to find a shipped athena rom with that CID.
if you cannot find a matching rom, let me know, i can still help,
cmonex
HTCS Þ?ÒtHTCE
please need halp
thx
felix999
read this post http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM
lakeman said:
read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM
Click to expand...
Click to collapse
in mtty this can read:
when type task 32
become LEVEL: FF
when type info 2:
HTCS Þ?ÒtHTCE
my CID is 1.1
on bootscreen can see this:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.10.RP00
what I do before...
Ameo WM 5.0 >>>>my mistake not update to WM6.0
run AthenaUnlocker
STEP1>>>OK
STEP2>>>by 60 % hang and stopped....
and now have the big problems.....Image ROM of t-Mobile 5.0 german demaged
can´t flash any rom´s
thx for hel or I want to pay bucks for service, when ma ameo live again...
felix999
lakeman said:
read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM
Click to expand...
Click to collapse
this is my CID
Cmd>info 2
info 2
Wait interpreter timeout
HTCS Þ?ÒtHTCE
????????
don´t know
felix999
Athena mobile 6 > SPL 1.10
become today a answer from crazy cat, that olipro say must take an rom in athena forum....
I flaswh with so many roms...anytime same error: error 294 - invalid vendor ID.....
My SPL 1.10 >>> can´t find a rom with SPL 1.10
what rom can repair my demaged ameo?????
thx for help
felix999
problem solved with ONLINEHELP from>>>>>cmonex>>>><<:::::>><<:::E:::>><<:::R:::>><<:::F:::>><<:::E:::>><<:::C:::>><<:::T:::>>
thx
felix999
lakeman said:
try flashing your original ROM which should be found in the wiki section.
Click to expand...
Click to collapse
Is this how you solved your problem?
Hye
After use HardSPl
I try to flash my Diamond Pro
and I have Eoor 244 : Invalid Device ID
and the flash stop
So what is the problem
thanks
lilive10 said:
Error 244 : Invalid Device ID
Click to expand...
Click to collapse
u wont get that error is hardSPL is installed properly. check ur spl by putting ur device in bootloader mode. if ur hardspl is correctly installed, continue to flash rom using raphael ruuwrapper by cmonex.
thanks
but how i go in bootloader mode and then see if hardspl is well install?
Next time pls read the thread thoroughly especially when u r upgrading ur device. u can get more info from where u get the correct HardSPL for raphael.
Just an advise from friend to a friend. U can go to the main thread to get more info. For entering bootloader, just press voldown + reset hole when device is on.
Hi
I use the correct hardspl for raphael
when I go in boot mode, I see 1.90 Olinex I think is it the good one
But nothing change
Sorry, but what can I do now?
Thanks