flashing rom question - HTC Startrek

hello, i have a cingular 3125, and i'm trying to flash with the qtek rom, it get to 4% and then it stops and says errer (294) invalid vender id, anyone know why it does this.
thanks

Have you gone through the process to application (not carrier) unlock the phone?
http://wiki.xda-developers.com/index.php?pagename=HTC_StrTrk_ROM_Update
Make sure you do everything on this page and then try again.

yeah you need to get it CID unlocked

Related

Invalid vendor warning while flashing rom

I have a Orange SPV M3100 unlocked using imei-check. I flashed the phone with the Dopod rom recently without a hitch but wanted to try the I-Mate rom.
However upon flashing I get the warning 'Invalid vendor' & something like 'this rom is not intended for use on this device'. Then the phone freezes on the white screen.
I thought that my phone was already Unlocked? What do I need to do to get the I mate rom to flash?
There is no problem just run the ROM updater, it will give you the warning and your phone will stick on the white screen?? without disconnecting the phone run the ROM updater again and it should work fine.
All this info is on the wiki page....give the WHOLE thing a read and you will find the answers to most common questions about the Hermes devices.
Cool thankx for that. I should have looked at the wiki first but was too lazy. I'll have another go after I get home tonight.

Does anyone have the Orange UK rom ?

Does anyone have the Orange UK rom ?
Not the : HER_ORRO_123702_1060400_WWE_SHIP.exe
I have a UK preproduction unit and need the rom for this device.
Thanks,
P
What's the problem with your prepro version? older bootloader and not flashing from sd-card?
PrePro TyTn
I updated it with a Imat rom.. no problem (it's a unlocked PDA).
A couple of weeks later i was updating it with the HTC rom and my laptop went in standby mode during the update
Now my pda starts up in de bootloader screen (1.06).
No reset option will work, mtty1[1].42.exe (set 14 0) does not work eighter.
If it try to update it again it gives a "Vendor ID error".
It's a Orange UK device, and it think i need the Orange UK rom.
I tried HER_ORRO_123702_1060400_WWE_SHIP.exe...no succes.
It's the only Orange Rom i can find.
Need some help... can't use the PDA anymore
Thanks for your help..
Pim
If it's a preproduction device it should be SuperCID, but I guess your CID got corrupted during the bad flash, so no Orange upgrade will fix it. Too bad you flashed a rom with bootloader 1.06
Can you attach a usb monitor capture of the flashing process until you get the invalid vender id to confrm that?
I saved the Basic and Complete capture
Yes, it was what I said: your CID is corrupted. Bootloader 1.06 enforces CID checking and yours won't match any ROMs CID, it's just junk characters.
There are many of you with this same problem (search the upgrading forum), I hope someone comes with a fix for this soon...
ok, thx for the help.
indeed i really hope someone has a fix soon....
where to get UK Rom
Is there any way to get the UK Orange Rom anyway?

athena without ROM, what to do?

Hello, I am a rookie in equipment from HTC, as well buy a HTC X7500, and then tried to put a 6.1 ROM, however some unknown parameters with the SPL, and tried to install a ROM with SPL 3.5, not anything wrong with the equipment when they turn opens a black screen with white and blue list and some red letters ....
Then I tried to access the bootloader, and everything well, he accessed without problems, but when I try to install a ROM it comes to 1% and equipment shuts down, already researched and I am very tired of trying things and nothing result, someone can help me?
When the ROM update process shuts down at 1%, you should be receiving an error message, either an Invalid Device ID error or a communications error. It is possible that your device is not yet properly SIM/CID unlocked. In any event, try to download and install a original OEM ROM (not a custom ROM) and you should be able to recover your device.
If you want to try again to unlock and load custom ROMs, a bit more reading is recommended.
Thanks but managed to solve my problem with this post:
http://forum.xda-developers.com/showthread.php?t=405814
who has the same problem that you can do this work.

Flashing problem....

Hello. I have a HTC dual and when i was in half way of a hard spl process, the bar progress stoped and a after a hard reset, the screen displays:
RUUNBH
NIKI100
SPL-1.16.0000
CPLD-4
i tried to flash all kinds of roms, but i have several errors: invalid vendor, invalid update, etc....
i think that i need an original rom to restore mobile phone. the phone is from SFR, but i cant get the french rom...WHat can i do? does it need the original rom? is there an alternative process?
Please, someone, help me!
regards
I have the same problem!
Try flashing the official french shipped ROM, even if I think you'll need the shipped SFR one (which is not available AFAIK...). That's the only solution for you to unbrick the phone since you didn't CIDunlocked it by flashing a hardSPL.
Try to search it on the forum, I can't exactly remember where it is, but I know it's available...
AND NEVER FORGET YOU ALWAYS HAVE TO CORRECTLY FLASH A HARDSPL BEFORE ANY OTHER FLASH !!!!!!​

Htc niki error [294] invalid vender id

Hi Everyone, HTC TOUCH DUAL Splash screen is frozen and has 1% hardSPL and installing the original rom and the update Util'de OFF ERROR [294] INVALID error vender ID What do you suggest?
Invalid vendor ID tends to mean that you haven't CID unlocked it.if your trying to flash the official HTC ROM then you need to have bought the phone from HTC (rather than a carrier).
Try and use MTTY to boot up your device and then follow the guide for CID maybe?
Invalid vendor ID tends to mean that you haven't CID unlocked it.if your trying to flash the official HTC ROM then you need to have bought the phone from HTC (rather than a carrier).
Try and use MTTY to boot up your device and then follow the guide for CID maybe?

Categories

Resources