hi, i ve got a XDA1 and am trying to watch tv on internet but most of them need wmp 9 or java plugin what can i do for this. thanks
is there any program for ppc like real1 at nokias
check this:
http://www.pockettv.com/
if you upgrade to 2003 then you get mp9
but i'm not sure if it works with streeming as i've never tried it
nor would i ever try it using something as slow as grps
if you upgrade to 2003 then you get mp9
but i'm not sure if it works with streeming as i've never tried it
nor would i ever try it using something as slow as grps
Click to expand...
Click to collapse
Actually I am using 2003 and use Windows media encoder 9 on a computer at home to broadcast my tv at a very watchable bit rate. I wouldn't suggest using it to watch anything with lots of action but for news or your typical sitcom it is great.
does the tv get streemed to the pda using GRPS ?
if so then wow
Yeah it is streamed through GPRS. Don't get me wrong... it's by no means perfect, but I have no problems watching it. Sometimes when there is not a real good signal it my buffer a few times but other than that I have had no probs.
I use microsoft enconder too, but use on my bluetooth network and it works quite well at 109kb and 148kb. Will be buying a wifi card soon should be able to get it to stream at least at 548kb.
I have a serious problem with orb/wmp
when I try to stream a video over 3g I recieve an error from orb saying that windows media audio and video are not supported by the Player!
when I use WMP it simply gets stuck and says paused.
I REALLY love Wm6 but I also REALLY love orb.
does anyone have any ideas? more importantly has anyone been able to get this combo working?
when Im off this week I will pull the registry from my wizard and try to compare the entries for WMv and windows media audio but some of those entries are cryptic.
I CAN get orb to work over WiFi
if you have this working over 3g please PM me a copy of your registry if possible.
TCPMP version .71 and .72 rc2 have this problem,.
Also I tried going through the source code for tcpmp, but there is no notation in the source so I gave up on that end plus I dont have the WM6 sdk anyways.
/** I can also confirm that Conduits pocket player simply hangs when attempting to stream 3-3-07
3 - 5 - 06
I have been able to get Orb working with both WiFi and 3G and EDGE. I am sorry I do not know how to copy my registry. here is what I have been able to figure out. I have Cingular, so I have switched my connection to isp.cingular from wap.cingular and I have enabled the network on Windows Media Player for WiFI/Lan 1.0 mbps or more, those are the only changes I have made and it is working really well. I have Core Player but have never been able to get it to work with Orb.
thank you cvbesq post # 15
if anyone else can please confirm this, I have an ANR line and do not have access to isp.cingular
3 - 9 - 07
I am able to confirm that WMP under XDA Live .20 will play both audio and video through orb. The Proxy must be disabled and a udp port seems to be required under options.TCPMP is still giving the same error as before.
thank you all who contributed. the next thing that needs to be corrected is tcpmp.
3-10-07
a possible fix for Slingplayer is here
http://forum.xda-developers.com/showthread.php?p=1164695&posted=1#post1164695
please let me know if it works
3-11-07
the above fix seems to work for sling player but not for TCPMP.
I'm baffled by this too, however I can't say that I'm terribly disappointed as I've pretty much given up on trying to watch videos on the Hermes crab a long time ago.
you know I didnt really have a huge problem with TCPmp with 1.34 or 1.06 just a little lag which I corrected by changing a setting in TCPMP, however not being able to watch orb is a big minus which is almost made up by HTML email.
I (and others) are having a very similar problem with Slingplayer. Looks like some of the codecs have changed?
If I have time over the weekend, I was going to try cookng up a ROM with the older WM6 codecs that were in the Wizard's ROM, 'cause they seem to be ok.
Don't know if it'll work though....
Great idea! Let us know how that comes along
Maybe stupid question, but have you added the plugins to play other format files? If you haven't.. get them here: http://picard.exceed.hu/tcpmp/test/
this behavior exists in wm6 vanilla also but not in the wizard, I was able to use it on the wizard, u have to remember that the hermes uses an ati gpu so the wizard drivers may not work but try anyways! I personally think that the api must have changed.
This may be the same problem area as the SlingPlayer om WM6. If I understand correctly someone here has a Wizard with this working, could you be so kind and test out SlingPlayer on that same Wizard and see if it works. I am thinking the codecs may be here but not mapped correctly in the WM6 we have for Hermes since it was a beta after all.
Also incase anyone is looking for TCPMP in only a CAB install (I could only find the exe on google):
I do find it curious that it works with wifi, thats why I went through the networking source code but there is no notation and I am still a new code writer (it was probably above my head any way). I think its written in C++ if anyone wants to go through it the code is available at the link earlier in this thread. or the codecs may simply not be registered, which is why I think we should look at the roms from the wizard.
This is also the same problem in sling player.
I have posted this in many other places but it seems like no one uses orb WTF? how can you have a 3g Wm phone and not use orb!
spiritofseth said:
I do find it curious that it works with wifi, thats why I went through the networking source code but there is no notation and I am still a new code writer (it was probably above my head any way). I think its written in C++ if anyone wants to go through it the code is available at the link earlier in this thread. or the codecs may simply not be registered, which is why I think we should look at the roms from the wizard.
This is also the same problem in sling player.
I have posted this in many other places but it seems like no one uses orb WTF? how can you have a 3g Wm phone and not use orb!
Click to expand...
Click to collapse
So you are confirming the WM6 on the Wizard runs slingbox?
it worked with Orb, im afraid im not in the slingbox club lol.
Ok, I managed to find a few minutes to cook up a Hermes ROM with the Wizard's WMP files in it. Didn't work.
Tried to do the same using the WMP files from a Universal WM6 ROM (which I know worked with Orb and SlingPlayer). That didn't work either.
Next, I'll have to compare all the registry settings...I may wait until Kyphur's next release though, 'cause if it's already working with the newer base ROM, then I'll just be wasting my time by fiddling around with this one (and I have precious little spare time at the moment).
My ORB works but I can only get sound to play.. i've yet to see video on my wm6
g.baltazar said:
My ORB works but I can only get sound to play.. i've yet to see video on my wm6
Click to expand...
Click to collapse
which Wm6 rom are you using? Vanilla or XDA live? I cannot even get sound to work over 3g.
I have been able to get Orb working with both WiFi and 3G and EDGE. I am sorry I do not know how to copy my registry. here is what I have been able to figure out. I have Cingular, so I have switched my connection to isp.cingular from wap.cingular and I have enabled the network on Windows Media Player for WiFI/Lan 1.0 mbps or more, those are the only changes I have made and it is working really well. I have Core Player but have never been able to get it to work with Orb.
Watch out, if your not subscribed to PDAConnect plan and you change your apn from wap.cingular to isp.cingular then you will be charged per kb
As for orb, I have it working fine on WMP and XDALive. I think all I did was disable the medianet proxies and change the UDP port on WMP. It does go through Locating, connecting, paused for a brief setting then buffering and voila.
Ty Fone,
I know all about the PDA connect and do have that, but thx, what you did was essentially what I did to get it working.
I have had no problem using orb, as long as the proxy has been disabled.(using either vanilla or wxdl). But I can not get Sling player to work at all. The sling log shows an error with the audio codec....Man, I really miss my sling player....orb is just not the same
fone_fanatic said:
Watch out, if your not subscribed to PDAConnect plan and you change your apn from wap.cingular to isp.cingular then you will be charged per kb
As for orb, I have it working fine on WMP and XDALive. I think all I did was disable the medianet proxies and change the UDP port on WMP. It does go through Locating, connecting, paused for a brief setting then buffering and voila.
Click to expand...
Click to collapse
I never had the proxie on my connection, what port did u change UDP to?
spiritofseth said:
I never had the proxie on my connection, what port did u change UDP to?
Click to expand...
Click to collapse
I just randomly chose port 1024 and disabled the auto speed detect process and set it to wi-fi/Lan.
Also forward the ports on your home router for orb so it will have a better upstream. Head over to portforward.com for help with that.
Hi all,
This is probably a British only question! I have been trying to watch ITV on line (British TV on line) on my Athena using AP 4.0 ROM. It uses an embedded video player and works great on the laptop as you would expect, however when trying on the Athena it tells me I don't have flash player installed. Now on my PDA I do have the mobile version running, but it fails to use this. Ive been having a play with it but I'm beginning to think its a lost cause. to save further strife does anyone know if I'm wasting my time on this one? I got you tube running a treat, but I'm to tight to subscribe to a pay for TV viewer
All the best
Jay
responderman said:
Hi all,
This is probably a British only question! I have been trying to watch ITV on line (British TV on line) on my Athena using AP 4.0 ROM. It uses an embedded video player and works great on the laptop as you would expect, however when trying on the Athena it tells me I don't have flash player installed. Now on my PDA I do have the mobile version running, but it fails to use this. Ive been having a play with it but I'm beginning to think its a lost cause. to save further strife does anyone know if I'm wasting my time on this one? I got you tube running a treat, but I'm to tight to subscribe to a pay for TV viewer
All the best
Jay
Click to expand...
Click to collapse
The flash we have in WM6 is version 7. They probably use version 8 or higher, so no joy.
Tadeusz said:
The flash we have in WM6 is version 7. They probably use version 8 or higher, so no joy.
Click to expand...
Click to collapse
I was thinking along the same lines that our flash player is not advanced enough to play this kind of video. I will have to get a shift. maybe the new Opera will work when its finished on a final.
Jay
Hey everyone,
I got a Redfly and it is pretty cool on most applications, even over bluetooth stuff runs good. The problem comes when I try to run Garmin XT or Tom Tom I get errors saying the program will not support the resolution, but Yahoo Maps works great. I guess I was surprised that the individual programs handle video res and not the OS. Anyone know how I can fix it ????
Cool, never heard of it until now.
The applications do detect the resolution so they can use the proper skin... The apps adjust and use the appropriate skin images for portrait and landscape.. also there are the square screen smart phones. On my dell Axim x50v I have trouble with some applications because they do not support VGA. So this is expected.
Did you search the knowledgebase on their site?
I would assume that the redfly would be capable of running in a magnified version of the native res for compatibility.. if not, you will have many applications that will have problems.
I got a chuckle out of this message on their site.
"Please read all the safety information in this guide before using the REDFLY to avoid injury."
There is no video capability. Program compatibility is hit or miss. No drivers for the Diamond yet.
Anyone know where in Garmin Mobile XT the video driver is ?
Maybe if I knew which file controlled that I could make it work ??
Hi All,
I searched the net but couldn't really find much on this. Is there a way to do screen mirrioring to a pc over wifi? I have my pc connected to the big screen tv and it would be awesome to share my evo3d's screen on the tv.
Cheers
Here you go, pal
http://www.agoraquest.com/viewtopic.php?topic=35037&forum=70
Go through all these steps, connect your PC and EVO 3D to the same network.
Adiost said:
Here you go, pal
http://www.agoraquest.com/viewtopic.php?topic=35037&forum=70
Go through all these steps, connect your PC and EVO 3D to the same network.
Click to expand...
Click to collapse
dnla doesnt do screen mirroring on the 3d does it? ive only been able share media like a server.
Hey bud,
Thanks for ur reply, dlna is an option and would work well for sharing media files. But from wat i understand it will not support screen mirroring so far the only way to mirror the evo3d on big screen that i've found is a device by xbounds but i dont really wana spend $139 just to be able to do this. There has to be another way or server/client app to mirror the screen on pc.
I've recently seen the light and made the switch to android from iphone ios actually does screen mirrioring with apple tv very well so i am sure android should be able to do this as well (and better)
Anyone?
Cheers