Related
I'm hoping someone can help me with this.
I woke up yesturday morning looked at my phone and noticed that the little icon you see when you plug in a headset was appearing.
I thought that it was quite strange condering i never use a headset so i did the obvious thing and plugged a headset in and removed it, yet it stayed there.
I've tried everything, cleaning it, moving the jack around, i even installed a new rom and it's still stuck in headset mode.
I'm guessing it must be hardware related due to the fact that i did reinstall the rom.
If i slowly insert the jack of my headset into the 3.5mm port, there is a point where the icon changes to display just headphones.
Anyone have any ideas because it's really bugging me having to use a headset to make calls all the time?
Unfortunately, it may mean that your Hero is soon for repair.
I had this problem - instead of using the headset, you can also use it set to speakerphone as a work around for now.
For me, a week later the mini USB port only allowed charging, not USB disk or sync and was told it was a circuit problem. Sent it away and all problems have disappeared with change of the mini-usb "flex" inside the handset.
The first tech support guy said this indicated that there was an electrical contact inside the 3.5mm jack which may have got some dirt or water that was completing the circuit and making the phone think there was a jack in there the whole time. Try visually inspecting it and ?remove any dirt with high pressure air? Just an idea.
Good luck.
Did you try one of the toggleheadset apps yet? (http://code.google.com/p/toggleheadset2/ or http://code.google.com/p/toggleheadset/)
It's a far shot, as you already changed your ROM, but you might want to try it nevertheless.
I have contacted HTC but haven't heard anything yet.
The second app you posted allows me to turn it off, however for it to work properly during phone calls i have to make sure i answer the call and then turn headset mode off.
Thanks for showing me the that app as it will help me use the phone whilst wating for HTC to reply haha.
Thank you very much elmicha. Toggleheadset is a life saver app.
My HTC Hero always stucked up in headset mode if I ever plug in the headset unless it is restarted. For a long time I had been scared to plug in the headset to ever listen music coz I'll have to restart it to bring it out of headset mode.
I tried the toggleheadset2 which is available in market but it didn't work for HTC hero. Fortunately, the toggleheadset widget worked.
Thank you very much guys. XDA rocks!!!
elmicha said:
Did you try one of the toggleheadset apps yet?
It's a far shot, as you already changed your ROM, but you might want to try it nevertheless.
Click to expand...
Click to collapse
Is there anything for a more recent build? Having a similar issue on DLEV 2.3.4 on an Infuse...
Reinstall with RUU should fix this
Hi,
I had similar issue, headset not working and device not recognised by usb. The installation of ice cream sandwich had screwed my phones drivers such that even older roms that used to work never worked again. Please install an original HTC RUU after a complete wipe, solves all problems.
http://forum.xda-developers.com/showthread.php?t=559622
Regards,
Kiran
Tonight I try to listen some music on my Tg01 and I discovered the head phone is not working, the answer button on the lead is not functioning either. I dont think is the lead because I keep it very safely and very careful not to damage it, I suspect is the micro usb jack is faulty but I can sync with PC with no problem. Have any one have this problem before?
If I can`t solve it I just return it to Orange for a new phone Phone just 6 months old. Hate to buy a new lead because I just can`t find it and I don`t think that`s the problem, not to mention waste of money.
I am using FFboy WM 6.5.5 Sense 2.5 Beta3 rom BTW.
Problem solved by new micro usb headphone lead. Toshiba one is broken ........
elder T said:
Problem solved by new micro usb headphone lead. Toshiba one is broken ........
Click to expand...
Click to collapse
Where did you buy it from?
I got it from local market for £5, I am looking in to LG micro usb headphone adaptor too, I think it might work as well.
http://cgi.ebay.co.uk/Micro-USB-hea...ting_LaptopAccessories_RL&hash=item53e173cc8a
i think there's a nokia phone that uses the same adaptor too....
elder T said:
Tonight I try to listen some music on my Tg01 and I discovered the head phone is not working, the answer button on the lead is not functioning either. I dont think is the lead because I keep it very safely and very careful not to damage it, I suspect is the micro usb jack is faulty but I can sync with PC with no problem. Have any one have this problem before?
If I can`t solve it I just return it to Orange for a new phone Phone just 6 months old. Hate to buy a new lead because I just can`t find it and I don`t think that`s the problem, not to mention waste of money.
I am using FFboy WM 6.5.5 Sense 2.5 Beta3 rom BTW.
Click to expand...
Click to collapse
i know you fixed this...
but in case it helps anyone, my headphone somethimes doesn't work - the sound goes to the external speaker instead, but if i quickly dial a call (any #) & then hang up (before it rings at the other end) then the sound is diverted back to the headphones
Hi adzman808, I thing that this question was brilliantly explained in Modaco's forum by Kevin, some months ago....
http://www.modaco.com/content/toshiba-tg01-tg01-modaco-com/298887/headphone-amplified-sound-output/
I modified a couple of speakers (following the Kevin's instructions) with success. I had exactly the same issue, speakers worked perfectly but, sometimes, sound source changed randomly to device's speaker.
I just soldered a couple of resistors between left /right line and ground, as Kevin said, and problem has been definitively solved.
I'm sure that you have he same problem. By the way, in Modaco I was(am) Xdalover. Nice to hear from you in Xda dev as well.
Hope this help you
Cheers
adzman808 said:
i know you fixed this...
but in case it helps anyone, my headphone somethimes doesn't work - the sound goes to the external speaker instead, but if i quickly dial a call (any #) & then hang up (before it rings at the other end) then the sound is diverted back to the headphones
Click to expand...
Click to collapse
I think it`s the same problem as my faulty toshiba lead, just yours is on the way out. Get a new lead and try it.
adzman808 said:
i know you fixed this...
but in case it helps anyone, my headphone somethimes doesn't work - the sound goes to the external speaker instead, but if i quickly dial a call (any #) & then hang up (before it rings at the other end) then the sound is diverted back to the headphones
Click to expand...
Click to collapse
I believe this is a uUSB control software (driver) issue - have also experienced on occasion.
Typical scenario is when the TG01 has been on charge via the uUSB; unplug the charger and then plug in the external audio connector (eg. one of my home-brew cables used to feed an external 5.1 sound setup - see the Modaco post Pere has just flagged) - device refuses to put audioout to the uUSB and will only play via the speaker.
I have previously resorted to a S/R which evidently reset the uUSB controller to respond correctly to insertion of a B plug wired for audio.
Adzman808's solution is evidently achieveing the same result but by forcing a change of function call by initiating the phone call - hadn't thought of that trick !
I'm still looking unsuccessfully for source of the relevant chip that I identified in the previous post about the uUSB which is supposed to be able to support external charging and audio out and some other functions at the same time....
I plugged my headphones in for the first time today and i realized that the left side was quieter than the right. And I unplugged it and replugged it in and it was fine. Then I tried it again and the left side was lower again. I'm not sure what's causing this or if my tablet is defective. But it seems like a hit or miss on getting even volume from both sides.
Anyone else having this problem or can test it out?
I have te same issue and it happens every time I plug in headphones and its annoying.
For me this only happened when I use my SGS2 headphones on Nook.
Actually, I found that SGS2 headphones only work well on the SGS2. With my laptop they have tons of noise, on nook sometimes I have uneven volume.
Although on SGS2 they have the best sound I've ever heard in headphones..
Have you guys tried other headphones?
I only have the one pair of head phones and they are a generic brand from dollar general and they dont have any issues when i use them with either my pc or psp or phone for that matter
Montisaquadeis said:
I only have the one pair of head phones and they are a generic brand from dollar general and they dont have any issues when i use them with either my pc or psp or phone for that matter
Click to expand...
Click to collapse
My 5$ noise isolation headphones work just fine? O_O
Montisaquadeis said:
I have te same issue and it happens every time I plug in headphones and its annoying.
Click to expand...
Click to collapse
This.
Every single time.
no issues here.
No issues here.
Headphone bug
Yes I too have that problem. Glad to see that it's not just me & mine.
Stupid question - for those having issues, have you tried wiggling or rotating the plug once it is plugged in? Sometimes I find if I have a spot of oxidization on the plug it will cause said uneven volume. It could explain the difference that occurs when you unplug/plug back in.
Another thing to try would be to plug them in when the device is asleep to see if that helps. If there is anything that tries to reduce the "pop" of the sound of plugging in the headphones it *might* affect how they sound after the fact.
Just grasping at straws here based on my experience with other devices.
I was having this problem until I realized I only had my headphones plugged in half way. Don't mean to be a jerk, but have you tried plugging your headphones in just a little further?
Sent from my DROID BIONIC using Tapatalk
no amount of fiddling with the plug helped me at all still have the issue and its annoying since the speaker isnt loud enough when I am out and about.
Another thing to consider - another issue I've had with certain device/headphone combos is that some headphone jacks either don't have a long enough plug or the plastic jacket of the jack interferes just enough with the plug in the device to affect sound (essentially related to downsay's comment). Try a cheap pair of 'phones from the dollar store with a simple jack and see if the problem persists. If so, perhaps the device is defective...
These are a cheap pair of head phones from dollar general lol.
Edit: Plugging the headphones in while the device was asleep seems to have fixed the issue for me for now. Sound is equal in both cans now
I have tried 4 different earphones, they have been plugged in all the way. Some people have no problem, so I'm beginning to think this is a hardware defect. I'm going to exchange mine and will let you guys know if there is a difference. I'll also try out the display model and see if it suffers from this problem.
Glad to hear you got them to work. Please do let us know how it goes with returning the nook tablet.
Sent from my DROID BIONIC using Tapatalk
I replaced my Nook twice partially due to this issue. Same problem on all three and it's always the left channel that is not connecting properly. I have found that I can get a good connection by plugging the jack in slowly. I think this is more a software issue than a hardware issue.
Yea just exchanged my tablet as well and the same issue is there as well as the one at the store. Plugging in slowly does help. Just before it engages the last click, if you hear both channels you're golden. Hopefully this is a software issue because it seems to be random. Unfortunately the one I exchanged has a creaking case, so now back to exchange again.
I stopped by Radio Shack this afternoon and purchased a $5 female to male 1/4" stereo connector. It seems to have solved the problem. I had similar problem years back with an iPaq PocketPC. Due to the shape of the hole on the iPaq/Nook, the headphone/earphone connector isn't inserting deeply enough.
Another solution would be to use something like a Dremel Mototool and shave away some of the excess material on the headphone/earphone adapter, so it can insert a little bit deeper.
ibgap said:
I think this is more a software issue than a hardware issue.
Click to expand...
Click to collapse
What is everyone testing their audio on? The stock media player? Video (what program)? Is it on every application you try?
I haven't had any issues with audio in games, websites or MX player at all other than a loudish pop when some programs start up, but I'm using a set of Denon stereo headphones (so, good (large/long, gold) headphone plugs on it, jiggling the connection does nothing).
So figured I'd go ahead and add a thread about this here for us Sprint users that are experiencing the problem with the Aux cable. Its a known issue and I'd link to a couple other posts, but I'm still a "noob"
I was a little upset to find that I wasn't able to use my phone to Pandora in the car.
However....
Today I got it to work, and here is how: I had the stereo set to the CD player when i plugged the AUX cable in and the icon stayed in the notification bar. Then I launched Pandora and let it start playing. THEN I switched the stereo to AUX mode, and it played fine my entire trip to work. Still experienced the "hot plug" sound between tracks, but I think I can deal with it.
geetee360 said:
So figured I'd go ahead and add a thread about this here for us Sprint users that are experiencing the problem with the Aux cable. Its a known issue and I'd link to a couple other posts, but I'm still a "noob"
I was a little upset to find that I wasn't able to use my phone to Pandora in the car.
However....
Today I got it to work, and here is how: I had the stereo set to the CD player when i plugged the AUX cable in and the icon stayed in the notification bar. Then I launched Pandora and let it start playing. THEN I switched the stereo to AUX mode, and it played fine my entire trip to work. Still experienced the "hot plug" sound between tracks, but I think I can deal with it.
Click to expand...
Click to collapse
I recall having an issue with my samsung headphones. They didn't work at one point, I rebooted and they were fine. The phone didn't even detect them for some reason. I've had no issues with aux in my car (aside from needing a new cable), however I thought it would be worth mentioning that my Note 2 had an issue with aux when it is on any AOSP ROMs. Selecting any app, even swiping the notification window down, sometimes even just leaving the music app and going back will stop the music from playing. The only solution for this was to go to the home screen unplug the aux start music playing and plug the cable back in and touch no other app. Again, it never did this with stock. I even went back to stock briefly because of this. AOSP seems to throw a fit with the aux cables.
I had issues with AUX today as well. Thought it was my specific phone but I'm relieved to know it's common....and perhaps a software issue.
infernosoft said:
I had issues with AUX today as well. Thought it was my specific phone but I'm relieved to know it's common....and perhaps a software issue.
Click to expand...
Click to collapse
Yeah I have it as well...I've found if I start Spotify, then plug in the AUX cord from my car, it works fine.
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Something like this:
http://www.amazon.com/Apollo23-3-3-Volume-Control-Samsung-Smartphones/dp/B00COXA8Y4
wolfhelm said:
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Click to expand...
Click to collapse
I just want my G3 to work as it should for such a simple function as the headphone jack/aux port.
I want to listen to music in my car without fannying around with different cables etc etc.
I had a Galaxy Note and S4, both played fine in the same car with the same cabling.
Shame on LG for releasing us a substandard product that cannot perform the most basic of tasks correctly.
I will say, i was extremely dissapointed when i plugged my shinny new phone into my stereo and the audio continued to come through the phone speakers. All other phones/devices work just fine in my car and there is no reason why my G3 shouldn't either.
R2DeeTard said:
I will say, i was extremely dissapointed when i plugged my shinny new phone into my stereo and the audio continued to come through the phone speakers. All other phones/devices work just fine in my car and there is no reason why my G3 shouldn't either.
Click to expand...
Click to collapse
My first feeling was confusion. I was also worried my headphones wouldn't work. But I was able to watch a beautiful high def video on my phone last night with my headphones on
Sent from my LGLS990
I just got this phone too, and although I love it, I was very sad to have this issue! I haven't had it on any other phone I have owned, so I certainly hope it is fixed in a future update. That and the video force close bug, but that is for another thread!
Guys, there is nothing wrong with the AUX port on your cars -- and they don't trigger via sound. They trigger via either conductive circuitry or via ohm load. Can you test if you are still seeing these problems when *not* charging? This issue is typically related to bad grounds. This happens to me at work when my phone is charging and I plug my headphones directly into my G3. If I pass the audio to my PC first (to the line-in,) and THEN to my headphones, the static is mostly gone.
So try unplugging the power source, and using different aux cables. Another factor is try plugging the power source into the same feed as the stereo. Sometimes this isn't that easy though.
What's happening on the back end with the sound changing between songs, etc, is that the audio codec, (the chipset,) is turning off to conserve battery. For me, when the chip turns on, it grounds the 3.5mm port just fine, and when it's off, AND I have power connected with headphones, I can get that whine -- depending on the scenario. So basically, this is by design -- an energy conservation tactic. I would be okay with them leaving the audio chip on the entire time headphones are connected.
Had this problem too and found that as long as I was charging the phone it would play like it should.
Yep, grounding issue. At work, routing the aux signal through my PC works just fine WHILE charging -- if I unplug, then I get all the machine noise.
In general, though, the headphone output is pretty crappy on this device. Even when it's "working great," there is still a faint amount of white noise that can be heard. Much higher than my HTC M7. The S5 had similar performance as the G3 though.
I just bought:
http://www.amazon.com/gp/product/B00ANDHBNS/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
And plugged it into:
http://www.amazon.com/gp/product/B00F474DVG/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
So when I get in my car, it connects to the dongle for music and the car's blue tooth for phone.
It's not perfect, but gets the job done.
wolfhelm said:
So I think I know the answer to this one.
It seems to have to do with how cars and some other devices treat aux inputs. For the most part it appears (at least in the case of my Prius) that with the input switched to aux the phone would not consistantly stay aux mode. What it seems like was happening is that the car doesnt actually 'activate' the aux port unless it senses a completed circuit (ie: audio playing). I have to believe this has to do with preventing feedback.
Unfortunately it seems the phone does the exact same thing. The headphone or aux symbol appears on insert of the cable because the phone senses the initial connection but then finds no load on the circuit thus assuming it is not connected and disables the port. You end up with basically an electronic stalemate. Neither one engaging cause they sense nothing from the other side. No load on the circuit.
Bear in mind this is completely dependent on the device you are connecting to your phone, as to whether it does what I'm talking about. Likewise, those experiencing popping or similar during song or track changes would basically be experiencing the same issue as during the song change the phone stops playing audio and your car kills the port. When the car kills the port, the phone kills the port, or is in the process of it when the next song starts.
To counteract this I bought an audio cable with a ground loop circuit built in. It is designed to remove the buzz from car aux audio due to the phone or other device being charged through the car's power system. But the added benefit is that it creates an artificial load on the line that the phone senses. Same idea as plugging in headphones as the earphone on the headphones creates a load on the line in the same way.
This is the audio cable I bought. Works like a charm every time, although one warning. I did experience one case of very loud static when unplugging it through the speakers in my car because of the fact that the car and the phone believe the circuit constantly is active and thus do not kill the connection to save your hearing. So be careful to only plug or unplug it when the input is not active or the car is off.
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/
It does appear that Amazon has put the item under review for now, though I'm not sure why as mine works flawlessly, but any similar car aux noise reducing cable would work, assuming its decent quality.
An aux cable with an in-line volume control should peform similarly due to the load created by the potentiometer, although it wouldnt remove the charger buzz.
Something like this:
http://www.amazon.com/Apollo23-3-3-Volume-Control-Samsung-Smartphones/dp/B00COXA8Y4
Click to expand...
Click to collapse
I just purchased this:
http://www.amazon.com/Kensington-Reducing-SmartPhone-including-iPhone/dp/B0031U1ATQ/ref=sr_1_1?ie=UTF8&qid=1406313911&sr=8-1&keywords=kensington+noise+reducing+car+audio+aux+cable
Working pretty well. Mainly solves the connectivity issues.
Still have the pop between tracks but it's much better.
Still have the "computer talk" garbage noise related to the display coming through the left channel.
I can live with this until LG or Android comes up with a fix.
aux problem
I guess I lucked out with my phone but then again maybe not. First off I will describe my setup, I have a 05 Subaru WRX with stock 6cd changer head unit ( no aux port ) I installed a Harmon Kardon Drive + Play iPod dock. This allows me to remote control my iPod and comes with a display that shows tracks and such. It works by FM transmitter but has an optional wire which I have that connects directly between the antenna and the stereo so you get little to no loss of signal. Between the AUX and my phone I connected a PAC SNI-1/3.5 3.5-mm Ground Loop Noise device. My previous phone was an LG Optimus G which I loved, when I hooked this phone up I could listen to Pandora/TuneinRadio through my car speakers and upon making/receiving a call I would hear the call through the car speakers and when I talked the phone mic. would pick up my voice. When I attempt this with the G3 I get no popping between tracks but the phone mutes the mic and when I say mute I don't mean the mute button comes on I mean the other person can't hear me. I found if I unplug and plug the phone in during the call eventually the mic works again, but to do this while driving defeats the purpose of hands free calling. Does anyone else have this problem? (or a solution).
Click to open expanded view
gorillaz1 said:
Yeah I have it as well...I've found if I start Spotify, then plug in the AUX cord from my car, it works fine.
Click to expand...
Click to collapse
Works for me, thank you.
Mines does not work at all, with headphones or aux Jack, now I have to get Bluetooth headphones and bluetooth radio for car
Sent from my LGLS990 using XDA Free mobile app
Do we know if LG is working on this issue? Or if it is something that can even be fixed with an update? I'm getting tired of messing with the cable just to play music in my car, and I don't want to have to buy extra accessories to get the job done.
Sent from my LGLS990 using XDA Free mobile app
Bumping this thread because I just started having issues. Last night I was listen to music with headphones and my device kept turning itself down. I thought it was Tasker at first but it kept happening. Today at work I wanted to listen to music on headphones again and the sound would only come through my device. I'm going to try an aux and other headphones when I get off work, but does anyone know if a system restore will fix this? I'm rooted with TWRP, I just don't want to wipe it for nothing.
Srambo217 said:
Bumping this thread because I just started having issues. Last night I was listen to music with headphones and my device kept turning itself down. I thought it was Tasker at first but it kept happening. Today at work I wanted to listen to music on headphones again and the sound would only come through my device. I'm going to try an aux and other headphones when I get off work, but does anyone know if a system restore will fix this? I'm rooted with TWRP, I just don't want to wipe it for nothing.
Click to expand...
Click to collapse
They fixed it with ZV6. If you're already on ZV6 then I have no idea.
Sent from my LGLS990 using XDA Free mobile app
Hi guys.
I have had this issue for awhile and have put it off thinking it was a headphone cable issue but it's not.
I have already tried cleaning with contact cleaner and rubbing alcohol.
My issue is that my phone will trigger "Google voice" search just by slight movement at the cable /jack junction. This is insanely annoying considering I bought this phone due to its audio prowess.
It will also automatically pause or change tracks with the same jack/cable movement.
I am Canadian and bought this from HK via ebay. I am one of those who almost never bother with warranties but obviously would seeing as I spend near a grand on this thing. How would I begin on a warranty claim?
Thanks.
Seems to be a common issue, unfortunately. I haven't really found a way to fix it yet.
How new is your device?
What type of finish is on the end of the cables ends?
I use this cable with almost no issue. Once in a while it will trigger voice when I plug in. But that's all.
https://www.amazon.com/gp/aw/d/B00F9KUF7O/ref=yo_ii_img?ie=UTF8&psc=1
I've also got a phone from HK prior to release in my country and have been struggling with this.
It looks to me that this is because of the way the phone detects your device. I've that the headphones that comes with the device and other earbuds works with no problems, but my bigger M40X for example have this.
The best solution I've found so far is this: plug it and leave it (not moving it at all) for about 10 seconds. After this the problem seems solved most of the time.
Unplugging and re plugging it several times also worked sometimes at the begging, but it was very frustrating and probably not so good for the longevity of the jack.
I'm actually about to make a factory reset for other reasons, but I'll post here if it makes any difference.
UPDATE: The factory reset did not fix the issue, but I have the impression it's triggering the high gain with my m40x as now I've noticed increased volume and no difference to when doing that trick of plugging the detachable cable first to the phone and then to the headset. Don't ask...
I had this issue a few times on my previous phone (Droid Maxx) when in the car, as I was plugging it in (usually when there was turbulence). I thought it was due to the tip of the plug contacting one of the other contacts in the jack. See this link for what the different parts of a headphone/mic combo plug or jack are. I'm not sure if your cable has all of those, but if the wrong ones touch maybe it triggers the mic to listen. Or internally your cable may be shorting between the different signals. Just spitballing ideas.
You know what guys, a friend of mine really liked my phone and got one as well. So when he got it I asked to him to test the jack problem with my headphones and it was simply not there. I do suspect this is a problem with the device. I'll try to get in touch with LG a second time for support (as the first time they asked me to get back to the country where I got it, the Philippines, and this is not really an option).
MrCogito said:
I've also got a phone from HK prior to release in my country and have been struggling with this.
It looks to me that this is because of the way the phone detects your device. I've that the headphones that comes with the device and other earbuds works with no problems, but my bigger M40X for example have this.
The best solution I've found so far is this: plug it and leave it (not moving it at all) for about 10 seconds. After this the problem seems solved most of the time.
Unplugging and re plugging it several times also worked sometimes at the begging, but it was very frustrating and probably not so good for the longevity of the jack.
I'm actually about to make a factory reset for other reasons, but I'll post here if it makes any difference.
UPDATE: The factory reset did not fix the issue, but I have the impression it's triggering the high gain with my m40x as now I've noticed increased volume and no difference to when doing that trick of plugging the detachable cable first to the phone and then to the headset. Don't ask...
Click to expand...
Click to collapse
Funny you mentioned the volume increase. That is a trick I learned from someone in another thread as the standard gain setting for low impedance headphones was too weak. That made a vast improvement in volume and was a life saver because I bought this phone specifically for its audio abilities.
As for the Google voice thing the only thing I found that worked was going under apps and disabling the Google app which is ridiculous considering it kills Google on tap which is a big feature of android.
I am pretty sure this is being trigggered by the jack somehow engaging a contact. Explains why it's triggered when I move.
Drives me nuts. Read somewhere that MM fixed this but not for me. I will try enabling Google app and uncheck all the voice options and see if this helps.
You know what, after struggling long with this I've finally gathered the balls to buy a headphone jack part and replace it myself. I've done it with my old Nexus 4 (the jack actually broke there).
It takes a while to arrive, but I'll perform the change and post the result here.
Where I got it from:
http://www.ebay.com/itm/122034019463
I sometimes have the voice recognition and volume issue, but for me it appears to be an issue with my headphones (Bose MIE2i). I don't have the issue with any other headphone or cable. I have this issue when I fiddle with the in-line controls of the Bose (both this and the 1st pair of Bose). My belief was that it was due to poor shielding of conductors in the controller or shoddy wiring connections.
Did u ever solve the problem with replacement? Im having issues with left and right volume. Like a shorted cable, but bought new phones & still doing that.
Just in case anyone is still suffering from this problem, I made a discovery today. I've replaced the headphone jack in my v10 3 times thinking that they're just ****ty headphone jacks that break all the time, but in my case at least the fault wasn't the contacts inside the jack itself. I found that my problem was actually related to the push-down connector that clips to the motherboard. I had a hunch that keeping the phone in my pocket with headphones connected was slowly rocking it back and forth and would eventually disconnect it. In order to add more clamping pressure to the connector, I put 3 small slices of electrical tape on top of it before screwing the back down. On my walk home today, the left earphone would disconnect with literally every step that I made. After putting the electrical tape in the problem was solved.