error with hardsplv7 - 8525, TyTN, MDA Vario II, JasJam Software Upgradin

I have got an custel rom and hardspl 2.10 but when i select autodect it gives me an error and tells me to use SSPL option.
Anyone know y??

maybe you have a older RUU utility. what rea you trying to flash? download the latest RUU, put it in the same folder as the .nbh you wanna flash, and you shouldnt have to check autodetect, there will be a box for you to check 2.10.

Yes there is a box for 2.10 im using latest ruu.
But in mrvanx guide it was said u should use autodetect that is y im concerned. Anyways i have flashed the OS only with selecting SSPL option.

from my undserstanding hardSPL forces sspl so you dont have to click it. but if that works for you then great.

peezy said:
from my undserstanding hardSPL forces sspl
Click to expand...
Click to collapse
That is just in the custom RUUWrapper which is shipped with HardSPL.
I believe there is far more functionality in HardSPL (including preventing flashing SPL, which is why the above)

You'll probably find your phone is asking you to confirm an action when it tries to check; it uses the RAPI interface which is a privileged function, when this happens then you'll find your phone hasn't been set to auto-allow RAPI.

Thanks Olipro,
So should i select manually "2.10" and "Is it hard spl" to flash?
Or there is a registry setting to allow "auto rapi",
I have a cab to enable rapi which mun used in his shelltool for wizard, if this helps??

Related

Custom RUU V5.2

new custom RUU is complete;
ROM Cookers, the good news is that this is now a single file, simply provide it with an NBH and you have compatibility with all SPL versions.
Fifth edition... with detection of all SPL versions, plus a very special selection of two soft-load options, including an "Unsafe" SPL which can be used to flash your device back to any SPL you desire.
5.2 is a small patch to fix an error with the unsafe SSPL not allowing you to overwrite the bootloader
Good Work Olipro One Question When Will It Be Available?
Cheers
fantastic Oli,
Great work, guy! (as usual )
Great works.
ok, Custom RUU is released, enjoy
uhm... minor bug in the old release... replaced
Thanks. You make life a lot easier....
Olipro, I can't flash using your new RUU and Hard 1.11SPL.
I got installed your Hard SPL 1.11. Start the RUU and selected "SPL-1.11 Bootloader" and mark "Is it Hard-SPL?", Everithing goes well but, when it tries to start the upgrade, the machine hibernates and, after some seconds an error 260 appears.
IMHO the RUU can't start the Hard-SPL 1.11.
Any clue?
EDIT: It doesn't leave a RUU.log in C:\ like previous version (?)
Thanks and best regards.
@VivaErBetis: put your phone in bootloader mode manually, then start the upgrade.
@VivaErBetis
Do you realy have SPL 1.11 on your phone? I think it means "Olipro SPL 1.11" is not SPL 1.11.
"Olipro SPL 1.11" can also be "SPL 1.04" and "Is it Hard-SPL"
So you must choose your original SPL and "Is it Hard-SPL".
brmm0016 said:
@VivaErBetis
Do you realy have SPL 1.11 on your phone? I think it means "Olipro SPL 1.11" is not SPL 1.11.
"Olipro SPL 1.11" can also be "SPL 1.04" and "Is it Hard-SPL"
So you must choose your original SPL and "Is it Hard-SPL".
Click to expand...
Click to collapse
no, you're horribly wrong.
1.11.Oli is based on SPL-1.11, 1.10.Oli is based on SPL-1.04
pof said:
@VivaErBetis: put your phone in bootloader mode manually, then start the upgrade.
Click to expand...
Click to collapse
Ok, done and it runs well. Thanks pof.
OK, sorry my mistake.
Now i read a lot of more thread, and the most is clear.
Thanks
ok, Custom RUU 3.5 released, enjoy
Olipro said:
ok, Custom RUU 3.5 released, enjoy
Click to expand...
Click to collapse
Thanks mate! This is how I wanted it
Olipro said:
ok, Custom RUU 3.5 released, enjoy
Click to expand...
Click to collapse
So quickly, thanks.....
Great stuff Oli
So, let me get this straight: just stick an nbh in the same location as this and run yeah?
Genius and simple!
So, do I run this instead of romupgradeut.exe that comes with, for example, the WM6 roms, if I have hard-spl 1.11 installed?
petes said:
So, do I run this instead of romupgradeut.exe that comes with, for example, the WM6 roms, if I have hard-spl 1.11 installed?
Click to expand...
Click to collapse
yes, put it in an empty folder along with the NBH you want to flash, that's all.

What version SPL neede to do Radio Rom upgrade?

I just got a HERMES, with tha radio rom
1.16.00.00
32.53.7018.01H
and my spl is 1.10.Oli
I want to upgrade the radio. Some post in this forum say I should have a 1.04 spl for a safe operation.
Is that neccessary? Because I think since 1.10.Oli is based on 1.04. But I am not sure about this. Is there anyone upgrade radio using 1.10.Oli without downgrade? And how?
thanks!
Use the latest 1.40.Oli
Use always the latest version of HardSPL and upgrade the radio in NBH format using the latest CustomRUU.
I installed the 1.38.00.10 but the battery life drops!
It's still the 1.27 the best radio rom for hermes or the last 1.40 is better? TNX
pof said:
Use always the latest version of HardSPL and upgrade the radio in NBH format using the latest CustomRUU.
Click to expand...
Click to collapse
Got it!
Thank you!
And also thanks to ghz.
Done!
Have upgraded the 1.40.Oli Hard SPL from 1.10.Oli, And also upgraded Radio Rom to 1.38.00.11.
But there is still some accident happened.
When I use the RUU, which is from the wiki, and I am sure I use the RUU ONLY.
But when I run it, and choose autodetect spl, I got a wrong warning.(see the pic attached)
I choose force sspl, and follow the steps, and failed. (feel lucky no bricking happened.)
Again I did not use autodetect, choose spl-1.11/1.13/1.30/1.35/1.40, it's done in less than 15 minites.
So, maybe the second time I was doing right?
Arethusas said:
Done!
Have upgraded the 1.40.Oli Hard SPL from 1.10.Oli, And also upgraded Radio Rom to 1.38.00.11.
But there is still some accident happened.
When I use the RUU, which is from the wiki, and I am sure I use the RUU ONLY.
But when I run it, and choose autodetect spl, I got a wrong warning.(see the pic attached)
I choose force sspl, and follow the steps, and failed. (feel lucky no bricking happened.)
Again I did not use autodetect, choose spl-1.11/1.13/1.30/1.35/1.40, it's done in less than 15 minites.
So, maybe the second time I was doing right?
Click to expand...
Click to collapse
are you sure your phone isn't asking for comfirmation when you use autodetect? this feature uses the RAPI of the phone and polls a memory area to check the version... if the phone is rejecting the request then you're likely to get this error.
Olipro said:
are you sure your phone isn't asking for comfirmation when you use autodetect? this feature uses the RAPI of the phone and polls a memory area to check the version... if the phone is rejecting the request then you're likely to get this error.
Click to expand...
Click to collapse
I did not get any infom from the phone screen. Keep my eyes open widely to watch.

Cannot use AUTODETECT when upgrade

Actually I have already flashed Hard SPL v7 in my device. I have done couple times upgrade (from WM5 to WM6 and changed differenet version of Radio)
But everytime when I run the RUUWrapper.exe, I can't use "autodetect" option, the "next" button doesn't show up and "error" message comes, and ask me to use "force SSPL" instead of "autodetect".
I do click "yes" during the process, when it ask me to allow a file to run on my device.(during click on the "autodetect")
Anyway, using force SSPL method works for me, but I just wondering I fully follow all steps from mrvanx guide already, so what is the problem?
And could anyone tell me what's the difference between follow 3 options:
1. SPL 2.02/2.1 new bootloader
2. Force using SSPL
3. Autodetect
during upgrade process?
Sorry that I post this question, Coz' even I have searched this forum, but still a bit confused abt them.
Appreciated.
with that version of spl auto detect does not work....it is a feature.
check the hard spl forum to find more about it.
faria said:
with that version of spl auto detect does not work....it is a feature.
check the hard spl forum to find more about it.
Click to expand...
Click to collapse
Do u mean if we have flashed hardspl v7 already ,the auto detect will not work?
And must use force SSPL?
Thanks again!
kinghung said:
Do u mean if we have flashed hardspl v7 already ,the auto detect will not work?
And must use force SSPL?
Thanks again!
Click to expand...
Click to collapse
No need,
you could always choose "SPL 2.02/2.1 new bootloader" and check "Is it Hard-SPL?" when you flash a new ROM.
AikonCN said:
No need,
you could always choose "SPL 2.02/2.1 new bootloader" and check "Is it Hard-SPL?" when you flash a new ROM.
Click to expand...
Click to collapse
Thanks, by the way, what is SSPL?
and what if I choose Force SSPL?
Since I have done couple times of upgrades, everytime I choose force using SSPL and this method works.
So I would like to clarify what the difference between them!
kinghung said:
Thanks, by the way, what is SSPL?
and what if I choose Force SSPL?
Since I have done couple times of upgrades, everytime I choose force using SSPL and this method works.
So I would like to clarify what the difference between them!
Click to expand...
Click to collapse
You have to use SSPL When you update a new version Hard-SPL,
Because Hard-SPL can only update by SSPL,
If your new ROM include a SPL but you don't know and you check "Force SSPL" and then your Hard-SPL will be covered with the SPL which include in your new ROM,
It's dangerous for your Hermes to lose Hard-SPL,
That's all.
AikonCN said:
You have to use SSPL When you update a new version Hard-SPL,
Because Hard-SPL can only update by SSPL,
If your new ROM include a SPL but you don't know and you check "Force SSPL" and then your Hard-SPL will be covered with the SPL which include in your new ROM,
It's dangerous for your Hermes to lose Hard-SPL,
That's all.
Click to expand...
Click to collapse
Thanks very much Aikon!
After your explaination and reading lots of articles from web.
I have figured out couple of points, I hope it helps people who are also confused or do not understand what they are doing when flashing radio or ROM.
1. HardSPL v7 could be overwrite when Force using SSPL only. So Force using SSPL only use when u want to flash SPL or new version of HardSPL released. Otherwise, do not use this option
2. Although force using SSPL overwrites IPL/SPL, we do not have IPL/SPL in radio ROM or OS (because we have repackaged the OS). That's why nothing happened even using force using SSPL option
3. Therefore basically after we have HardSPL v7 in our device, we should use "SPL2.02/2.1 new bootloader" and check the "is it hard spl " box everytime when we use RUUWrapper to flash radio or OS ROM
4. That's why using SSPL_HERM.exe method could overwrite SPL, and those people needed to reflash again HardSPL after OS upgrade.
Pls correct me if anything I mislead or wrong.
BTW, I still don't understand why I can't use "Autodetect" option. Since I follow all step from mrvanx guide already.
What I thought is after we have hardspl and using the latest RUUWrapper.exe , everything should be exactly same as what mrvanx guide tells. We should be able to use AUTODETECT instead of "using force SSPL"or "SPL2.02/2.1"
Pls help if anyone knows why!?
Hi kinghung,
I had the same problem and I found out, that you can use "Auto-Detect" when you click first on "is it hard spl". After you activated "is it hard spl" and a click on "Autodetect" you get the right setting marked.
Don't know why it's so, but it works!?
Greets
komodor
kinghung said:
Thanks very much Aikon!
After your explaination and reading lots of articles from web.
I have figured out couple of points, I hope it helps people who are also confused or do not understand what they are doing when flashing radio or ROM.
1. HardSPL v7 could be overwrite when Force using SSPL only. So Force using SSPL only use when u want to flash SPL or new version of HardSPL released. Otherwise, do not use this option
2. Although force using SSPL overwrites IPL/SPL, we do not have IPL/SPL in radio ROM or OS (because we have repackaged the OS). That's why nothing happened even using force using SSPL option
3. Therefore basically after we have HardSPL v7 in our device, we should use "SPL2.02/2.1 new bootloader" and check the "is it hard spl " box everytime when we use RUUWrapper to flash radio or OS ROM
4. That's why using SSPL_HERM.exe method could overwrite SPL, and those people needed to reflash again HardSPL after OS upgrade.
Pls correct me if anything I mislead or wrong.
BTW, I still don't understand why I can't use "Autodetect" option. Since I follow all step from mrvanx guide already.
What I thought is after we have hardspl and using the latest RUUWrapper.exe , everything should be exactly same as what mrvanx guide tells. We should be able to use AUTODETECT instead of "using force SSPL"or "SPL2.02/2.1"
Pls help if anyone knows why!?
Click to expand...
Click to collapse
Yes, your viewpoints from 1 to 4 are right,
I don't know the reason why I can't use "Auto Detect",
I always choose manually.
I have lately found the same issue.
But I checked my device and oli 2.10 was there. So I just went ahead and forced the flash. and all was OK.
Ticking off hard SPL and oli 2.10 also worked fine.
The main thing to do is to ensure that you have oli 2.10 on you device before flashing any RUU file.
komodor86 said:
Hi kinghung,
I had the same problem and I found out, that you can use "Auto-Detect" when you click first on "is it hard spl". After you activated "is it hard spl" and a click on "Autodetect" you get the right setting marked.
Don't know why it's so, but it works!?
Greets
komodor
Click to expand...
Click to collapse
First of all, thanks a lot!
I have just tried your method, but it still doesn't work,the "error" message still comes out and asks me to use force using SSPL.
AikonCN said:
Yes, your viewpoints from 1 to 4 are right,
I don't know the reason why I can't use "Auto Detect",
I always choose manually.
Click to expand...
Click to collapse
Hi Aikom, appreciated!
I still don't understand why the"AUTODECT" doesn't work for me and some other Hermes users.
basilrsa said:
I have lately found the same issue.
But I checked my device and oli 2.10 was there. So I just went ahead and forced the flash. and all was OK.
Ticking off hard SPL and oli 2.10 also worked fine.
The main thing to do is to ensure that you have oli 2.10 on you device before flashing any RUU file.
Click to expand...
Click to collapse
From my understanding, your points are partial correct.
If there is no IPL/SPL inside the ROM u are going to flash, either using force SSPL or pick 2.02/2.1 SPL , both method work and safe!
But if unfortunately someone flashing a ROM with IPL/SPL inside, the current hardSPL would be overwrote if u using force SSPL!!
It's dangerous!
kinghung said:
From my understanding, your points are partial correct.
If there is no IPL/SPL inside the ROM u are going to flash, either using force SSPL or pick 2.02/2.1 SPL , both method work and safe!
But if unfortunately someone flashing a ROM with IPL/SPL inside, the current hardSPL would be overwrote if u using force SSPL!!
It's dangerous!
Click to expand...
Click to collapse
Thanks for your explanation!! Right now I have a much clear concept about flashing!!
And I just notice why the bootloader has changed after I flashed my hermes from WM5 to WM6? Thanks again!!^^
This thread helped me a lot
I was experiencing the same error but thanks to your explanation i could install the rom!!!! Thanks a lot.
kinghung said:
From my understanding, your points are partial correct.
If there is no IPL/SPL inside the ROM u are going to flash, either using force SSPL or pick 2.02/2.1 SPL , both method work and safe!
But if unfortunately someone flashing a ROM with IPL/SPL inside, the current hardSPL would be overwrote if u using force SSPL!!
It's dangerous!
Click to expand...
Click to collapse
That's make much more sense to me.
I had the same problem, chose the "Force" option, and now when I check the bootloader option it says SPL-2.Olipr, meaning it hasn't changed, even though I chose the "Force" option.
Wrong tread - moved
AUTODETECT doesn't work for me too. I have HERM100.
By the way - if I choose "SPL-2.02/2.10 New Bootloader" and tick "Is it Hard-SPL?", after clicking "Next", there is a red text saying that this flasher is intended solely for SPL 1.11 and I must have 1.11 Hard-SPL installed. But I have 2.10... should I ignore this? ;/
mrbabcia said:
AUTODETECT doesn't work for me too. I have HERM100.
Click to expand...
Click to collapse
The same with my HERM300.
If you have correctly checked the options for Bootloader version, then yes, ignore the warning.

Athena Unlocker

Hello all. How do I use athenaunlocker? I have download it, and unrar it, and on PC it gives me an error. Should I copy it on memory card, and run it from pda? thank you.
ady_uaic said:
Hello all. How do I use athenaunlocker? I have download it, and unrar it, and on PC it gives me an error. Should I copy it on memory card, and run it from pda? thank you.
Click to expand...
Click to collapse
Hi ady
before we go further I need to know 2 things.
Do you have a HTC athena or variant.
Did you use the wrapper and follow the instructions from here
http://forum.xda-developers.com/showthread.php?t=316846
hello, i have htc x7500 advantage and i want to install the english wm 6 rom, wwe. first i have to unlock it, right?
I didn't used that. if i will, i don't need anymore athenaunlocker? what's the difference between athenaunlocker and hard-spl from that link?
You have to explain WHAT HTC wm6 ROM you want to install First
If you have and old WM5 x7500 just register on www.htc.com and download the HTC OFFICIAL WM6 update for YOUR language!!
ONLY
If your X7500 is SIM LOCKED you need to UNLOCK it first(wrapper isn't for SIM Unlock) and ATHENA UNLOCKER meets your needs
i wanna install this rom: AP Dual 3.0.
ady_uaic said:
hello, i have htc x7500 advantage and i want to install the english wm 6 rom, wwe. first i have to unlock it, right?
I didn't used that. if i will, i don't need anymore athenaunlocker? what's the difference between athenaunlocker and hard-spl from that link?
Click to expand...
Click to collapse
If you want the AP3 0r other roms in the sticky made for SPL 1.2 http://forum.xda-developers.com/showthread.php?t=397518
then you should run the athena wrapper that Olipro has made to be as much foolproof as possible
As he says "your device MUST BE RUNNING WINDOWS MOBLE and MUST BE SYNCED WITH THE PC.
to recap: IF YOU ALREADY HAVE 1.20/1.25, DO NOT USE THIS."
It seems that you must use the same USB port as well.
i have allready downloaded that rom, all i need to know is the difference between that 2 files: activeunlocker and hard-SPL. And, as I saw on a post of that link, i can use one or other from that files. now, tell me, activeunlocker should I copy on PPC? (i will receive it tomorrow, and i want to know what i have to do) Because from PC doesn't work, it gives me an error.
ATHENA UNLOCKER is needed ONLY if you have to unlock the SIM too.
E.G. If your phone, WITH ORIGINAL ROM, can use ANY SIM, you don't need to run ATHENA UNLOCKER
As CMONEX said here
http://forum.xda-developers.com/showpost.php?p=2030747&postcount=81
wrapper is hardspl + customruu
unlocker is hardspl + sim unlocker
SPL means a part of "bios" used ALSO for defining your device language and vendor (HTC, T-Mobile, DOPOD,...) and avodi flashing a "non original" ROM
To flash ANY rom you need to overcome those informations. You can do this running an application, but if something goes wrong during the FLASH and your device doesn't start anymore... you are lost. You can't run the application again, because you haven't the OS!
HARD SPL has been developed to avoid this problem. It is a NEW SPL (1.2 or 3.x) developed from OLIPRO (and CMONEX too for 3.xx) flashed into your device. it is IN the "BIOS" so, even if your OS doesn't start, you can flash ANY ROM
Both, WRAPPER and UNLOCKER will flash HARDSPL. You need only the WRAPPER if your phone can use any SIM!
When you choose the ROM some are build for the SPL 3.x and other using the 1.2 SPL.
With WRAPPER or UNLOCKER you have the 1.2 SPL release, if you want to test a 3.x ROM you need to flash the AP4 rom.
The only differences between SPL 1.2 and 3.x are the "partitioning" of the device. AP4 needs more space for the system files, then the 3.x SPL was developed to increase the System Partition. SPL 3.x flashing IS ONE WAY ONLY, (since Cmonex relase the tool to go back): if you flash AP4 you CAN'T flash any origninal HTC ROM
ady_uaic said:
i have allready downloaded that rom, all i need to know is the difference between that 2 files: activeunlocker and hard-SPL. And, as I saw on a post of that link, i can use one or other from that files. now, tell me, activeunlocker should I copy on PPC? (i will receive it tomorrow, and i want to know what i have to do) Because from PC doesn't work, it gives me an error.
Click to expand...
Click to collapse
Listen to what Sergiopi said.
You will always get an error running these programs unless you have an activesync connection to the ppc when you run the program.
The way you were talking I thought you had already tried to run it on your PPC
sergiopi thank you soo much. you are so kind. thank you.

WM 6.1 on Hermes?

Hi guys.
I was wondering if there is a way to get WM 6.1 for Hermes.
I would also pay for it.
Thx
Meow90 said:
Hi guys.
I was wondering if there is a way to get WM 6.1 for Hermes.
I would also pay for it.
Thx
Click to expand...
Click to collapse
It's actually simply possible Mate. I had my Hermes guarantee left, and that's time to do lot of things.
I'm a newbie either, all You need is read as much as info about flashing, how to do it safely. I state simple steps :
- Backup Your Data
- Do HardSPL (to get flashing safely)
- Starting flashing WM6.1 ROM.
There are lots of ROM, some compulated here : http://forum.xda-developers.com/showthread.php?t=408984
Thx!
Data Backup is done.
My SPL is "SPL-2.03".
When I started "CRCs Release 11.2 - Stable", it asks, which SPL I use.
Can I choose "SPL-2.02/2.10/2.30 New Bootloader"??
if you have installed hard spl then it should be 1.40 olipro, if you havent installed hardspl i would do it now
Alright.
I have installed Olipro now.
Have I got to choose SPL-1.04? (Thats what Autodetect says)
Or just force using safe SSPL?
Meow90 said:
Alright.
I have installed Olipro now.
Have I got to choose SPL-1.04? (Thats what Autodetect says)
Or just force using safe SSPL?
Click to expand...
Click to collapse
MAKE SURE you have installed HardSPL dude.
Once you have use autodetect and it will choose the correct SPL, otherwise choose "SPL 2.02/2.10/2.30" and tick the "Is it HardSPL?" box.
Sorry, i forgot to say that I made sure.
I pushed Power+Cam+Reset and then i got that screen with "SPL-1.40 Olipro" or whatever. I am sure it's Olipro 1.40.
I ticked the "Is it Hard SPL Box" and it always chooses SPL 1.04.
When i try to flash with this setting, i get a connection error, even when i am synced with activesync.
After i got the Connection error, active sync also gets an error. (It's not connected)
Edit: Btw. I used this one: 1.10 - Olipro SPL - based on 1.04 and unlocked - use for rtask commands.
I tried again...
and guess what?
It worked! Thanks guys
Go to the top of this forum, there is a thread called "Hard-SPL, Or How to Not Brick Your PDA Ever Again And Fix Bad Blocks". Install Hard SPL ver 7. When you go to the boot loader it should say SPL : 2.10 olipro.
Anything else you have a good chance of bricking your Hermes and NOT being able to recover.
Ver 9 is for developers and isn't needed by the layperson. It can cause confusion s it tends to throw up an error message after flashing a rom using the pc.
Please remember though, Hard SPL ISN'T A GUARANTEE, ITS A SAFETY NET.
Cheers...
Can't flash the windows mobile 6.1
For some reason everytime I try to flash my hermes with the wm6.1 rom it always says, "the update utility cannot open the requested file" I've run the hard spl flash and it says it was successful. But I still get this error message.

Categories

Resources