Related
All rite here we go, in advanced i thank u guys for trying to help me out here.
First, i'm a n00bie compared with the most of u guys.
My Device:
Tytn Herm 300
OS: Schaps Purple 3.30c
SPL: Hard-Spl 2.10 oli
Radio: 1.16.00.00 !Hmzz...that's the problem!
My phone functionallity sucks...some how it keep loosing connection while i see the phone indication bar up to 3 bars. So i decided to do something about it.
Beeing a noob i thought it got to do something with the OS. So i upgrade it to Schaps's wonderfull purple WM6 Hermes 3.30c and loaded the Hard SPL 2.10 oil V7. All went great, and my Hermes never looked so cool before.
But now i'm trying to upgrade my radio, which is still version 1.16.00.00, to what ever better version. I tried every radio upgrade possible from this list:
http://wiki.xda-developers.com/index...actedRadioRoms
Every single one starts well. passed the information retrieving from my phone. Confirmed the update, and then there was the installation progress bar....
All versions of the radio roms i downloaden get stuck in here. It doesn't even start..0% and error... And really i dun have any idea why.
So after re-flashing a gazillion times, i decided to ask help to the allmighty XDA community. So pls, if anybody there got a suggestion or the solution...i would be so thankfull and will slaughter a goat to worship you
If you've got schaps Rom and HardSPL on your phone then you obviously don't have problems flashing or with PC/phone comms.
When you try flashing the radio, how long do you wait before deciding it doesn't work? I've found that some of them can take what seems like a really long time and I'm tempted to unplug and start again.
Maybe try again, then go make yourself a cup of tee/coffee or get a beer then come back 10 minutes later. If the upgrade still hasn't worked we'll have to look a bit deeper
RaDeNRFX said:
- I am so sorry posting this twice in the wrong sections, it seems that i'm a really noobie forum user - But i finally found the rite section. So my humble excuses.
All rite here we go, in advanced i thank u guys for trying to help me out here.
First, i'm a n00bie compared with the most of u guys.
My Device:
Tytn Herm 300
OS: Schaps Purple 3.30c
SPL: Hard-Spl 2.10 oli
Radio: 1.16.00.00 !Hmzz...that's the problem!
My phone functionallity sucks...some how it keep loosing connection while i see the phone indication bar up to 3 bars. So i decided to do something about it.
Beeing a noob i thought it got to do something with the OS. So i upgrade it to Schaps's wonderfull purple WM6 Hermes 3.30c and loaded the Hard SPL 2.10 oil V7. All went great, and my Hermes never looked so cool before.
But now i'm trying to upgrade my radio, which is still version 1.16.00.00, to what ever better version. I tried every radio upgrade possible from this list:
http://wiki.xda-developers.com/index...actedRadioRoms
Every single one starts well. passed the information retrieving from my phone. Confirmed the update, and then there was the installation progress bar....
All versions of the radio roms i downloaden get stuck in here. It doesn't even start..0% and error... And really i dun have any idea why.
So after re-flashing a gazillion times, i decided to ask help to the allmighty XDA community. So pls, if anybody there got a suggestion or the solution...i would be so thankfull and will slaughter a goat to worship you
Click to expand...
Click to collapse
ach2 said:
If you've got schaps Rom and HardSPL on your phone then you obviously don't have problems flashing or with PC/phone comms.
When you try flashing the radio, how long do you wait before deciding it doesn't work? I've found that some of them can take what seems like a really long time and I'm tempted to unplug and start again.
Maybe try again, then go make yourself a cup of tee/coffee or get a beer then come back 10 minutes later. If the upgrade still hasn't worked we'll have to look a bit deeper
Click to expand...
Click to collapse
I waited till the Program says connection error...and send me to recovery proces. And i've been making hella tons of coffee after trying to flash that many Radio Roms. Any other suggestions? I'm so desperate
Ok, maybe some more info...
Do you see 'NO GSM' during the phone boot process?
Do you have no radio at all or just intermittent reception?
Are you running Vista?
What is the connection error number?
If you've lost the radio but have hard SPL it may just be a case of re-flashing an original manufacturers ROM (which will include the radio) then start your upgrading again afterwards. Don't forget to back-up data before flashing.
If you do flash a manufacturers shipped rom - check that you still have HardSPL afterwards.
ach2 said:
Ok, maybe some more info...
Do you see 'NO GSM' during the phone boot process?
Do you have no radio at all or just intermittent reception?
Are you running Vista?
What is the connection error number?
If you've lost the radio but have hard SPL it may just be a case of re-flashing an original manufacturers ROM (which will include the radio) then start your upgrading again afterwards. Don't forget to back-up data before flashing.
If you do flash a manufacturers shipped rom - check that you still have HardSPL afterwards.
Click to expand...
Click to collapse
Well the weird part is "No GSM" appeared occasionally...some times it shows it sometimes it's not showing it.
No...i'm a Vista hater. And dun have the original manufacturers ROM. I've got the "T-Mobile Vario II" from The Netherlands..so if anybody got a link for the original version i'd be thankfull.
The Radio it self is intermittent and very inpredictable...for example:
Radio indicator says i got full recieve:...but i can't call or recieve any.
Connection error: 262 (which is, if i'm not mistake a connection error.) Which is bull cuz i'm re-running every other ROM's upload with the same way and succeded/
Radio indicator says no reception and shows an exclamation mark:...and my GF just called me to hurry up and pick her up :/
But the weird part is...it seems that my radio ROM is locked somehow. I can upgrade or downgrade SPL's and OS ROM's but not the Radio ROM.
I've tried to use MTTY by now and followed the manual bellow: (Problem 5)
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
But it began with invalid password. Procede as written and it didn't helped.
More suggestions are welcome
My bad...i didn't looked well enough. It is saying No GSM the whole time.
More information:
I've checked the Device information on the Hermes now some information are blank:
Radio: Blank
Protocol version: Blank
IMEI: Blank
All other information field are filled. Been spending hours reading tutorials and manuals...and nothing. HELP!
OK,
This isn't a problem I've had myself, but loads of other people have and there are quite a few threads on how to unbrick from here... you're going to have to do a bit of reading.
This page shows the different combinations of OS/radio/brick type etc and should point you in the right direction for the correct course of action http://wiki.xda-developers.com/index.php?pagename=Hermes_Unbrick
Then read through this thread http://forum.xda-developers.com/showthread.php?t=286755 . It's got really long but read the beginning where POF describes the types of problem and also the solutions. Then it's probably best to jump to somewhere near the end and pick someone who has a similar problem.
It sounds to me as though you need to just flash a radio in nbh format, but please do some more reading before you do this to check my advice - as I said at the beginning, I haven't had this problem so I'm only giving advice from what others have written.
ach2 said:
It sounds to me as though you need to just flash a radio in nbh format, but please do some more reading before you do this to check my advice - as I said at the beginning, I haven't had this problem so I'm only giving advice from what others have written.
Click to expand...
Click to collapse
I am really thankfull of ur post. Unfortunately, i've been doing some reading. Including the link u gave me. The problem is that i can't upload/flash Radio in nhb format.
As i described in the first place, i can't load a nhb format radio in RUUWrapper.exe properly. It can start the proces..but it always end up with a connection error code 260/262 during the installation progres bar (0%).
The solutions some ppl tried in ur link is often not my case. And the similar cases i have tried where i end up with the same grumpfy situation.
have you tried to flash the radio using the SD card method? I too have a cable connection problem but I fear mine may be hardware failure.
Yap...and no luck
Please help me. I recently upgraded to the Black satin rom and everything was fine. However the touchscreen on my M3100 has started to go haywire.
After being on for about 5 minutes the touchscreen doesn't work. It seems like the top right hand corner is faulty as the close button keeps being pressed again and again. I think it is probably the phone that is faulty rather than the ROM.
Anyway I need to revert back to the original Orange ROM (WM5) so I can send it back to orange. I've only had the phone about 3 weeks so its still under warranty.
I tried to load the ROM off the orange business website but it errors when trying to load the rom on. I assume I need to downgrade the bootloader thingy.
Any help much appreciated!
www.mrvanx.org
Look for "downgrade guides"
I'm in a similar boat mdavix!
I've just tried flashing an original T-Mobile WM5 ROM using MrVanx's guide but it doesn't progress beyond the bootloader page. Instead the update times-out and gives Error 260 - "Cannot connect to PDA"
Getting late (that's when Bad Mistakes Happen lol!) so will come back to it at the w/e I hope. Let us know if you have any luck!
sim
--
T-Mobile MDA Vario II / schaps 3.57a / Radio 1.41 / HardSPL
interestingly, I put black satin on my new M3100, and the screen started going. So I put it back to the latest Orange release (from the website) 2.11.61.1, but it was still screwy. Sent it back to Orange, and got a different recodnitioned phone back. They said the ROM was the issue, and the one they gave me had 2.11.61.3 on it. This version is not available for download... has anyone else seen it?
Do orange know what is happening to the screens? Is something getting burnt out? does 2.11.61.3 have a fix?
Well... I'm too scared to put WM6 back on, now, although I really want to. I at least want to wait till I can get hold of the update for 2.11.61.3, and even then, I'm not sure.
I have looked at the downgrade guide but don't really fancy the re-compiling the nbh business.
The strange thing is that if I take the battery out for a couple of minutes, then replace and boot up, the screen works for a while!
Is it worth trying a different rom?
mdavix said:
Is it worth trying a different rom?
Click to expand...
Click to collapse
No, it's a hardware problem, I assure you.
Ok, thanks vp3G.
So I still need to get back to WM5.
I'll have to give mrvanx's downgrade guide a go!
Is this still current? Is this the correct one to try?
I carried out the steps in the downgrade guide and attempted to flash the resultant rom onto my M3100. It started to update got to 1% and failed with a transfer error!
Now when I turn the phone on it just comes up with the three colour screen!
Have a broke it forever? The screen reads:
HERM100
IPL-1.01
HERM100
SPL-2.10.Olipro
Please help!
Phew! Panic over, I've managed to get the Black Satin rom back onto my phone.
I'm stuck at the screen alignment screen again but at least its got an OS on now!
I still need to load WM5 on tho. I think I'll try re-doing the downgrade guide and see if that helps.
I'm looking at duttys nbh tool and notice that the device id is HERM200. My phone is an M3100 so a HERM100. I'm going to change the value to be HERM 100 and re-compile. Hopefully that was the problem last time!
Hi everyone,my name's Larry and I just registered to the forums. Please forgive my newness but I am in a bit of a pickle here.
I have a MDA Vario II, aka Hermes 300, that I bought s/h off ebay. Works fine,no worries, but I upgraded to WM6 because i felt browsing was a little slow and the screen graphics werent as good as I expected. The upgrade was from the T-mobile site itself and all went fine. Only thing is I dont believe this phone can handle it(needs more RAM really) and after being online a while it gets really slow,like steerig a cow through treacle at times so I came to the conclusiong it was a bad move! Now I've noticed a link on here about downgrading to WM5 but is it that easy for one with no specialised tools or knowledge(tho i did build my own PC, or should I say ahem WE did)
Also a problem the phone has developed since the upgrade is it keep deleting my email settings, even tho on the 'desktop' screen it tells me i have so many unread emails in each account! So now i cant check emails from it either!
I do hope I can sort this out cos it is really frustrating having a PDA and not being able to browse properly!
Many thanks
Larry
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
scousemartin said:
Welcome to XDA-Developers larry. Well Firstly i would start with CID unlocking your device so that you can flash any rom you can do that by downloading hard spl from here
http://forum.xda-developers.com/showthread.php?t=296722
then once you have flashed that you can basically download and install any rom for the hermes. I have an mda vario ii and hate the t-mobile rom as it installs quite a bit of useless crap. I never use and it is also so damn ugly. if after installing a new rom you find you have internet connection problems and/or mms settings then download and run this http://rapidshare.com/files/92547562/UK_Setup.exe that will install the settings for internet and mms for all uk networks, the majority of the cooked roms on here though ,already have a network wizard to set it up for you, but better to be safe than sorry
P.S. I forgot to add if you are looking for speed and extra ram i would look for a vanilla(clean) rom, install that and then add the apps you want via cab files, you will find them scattered about all over this site
Click to expand...
Click to collapse
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Hermes300 said:
Ah thanks for that but I have no idea what CID unlocking is(do you mean like unlocking the phone to other networks?) Also what's hard spl?? Totally in the dark about this!
Click to expand...
Click to collapse
all your question answered here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Hermes
I have looked thru the wiki and cannot find the advice I need.
My device has the following on it and what I would like to know is if I can actually drowngrade the device back to WM5.
The rom version is 3.60.110.4 (T-mobile UK)
The radio version is 1.50.00.00 so I assume that it is boot 0108.
The IPL is 1.04 and the SPL 2.03.
The protocol reads as follows 32.83.7020.20H
I have come across a guide that states if the radio is above 1.27.00.00 then downgrading may not be possible.
"(NOTE: If your radio version is currently HIGHER than 1.27.00.00 then it is very likely the radio bootloader is version 0108, this WILL NOT allow the radio to be downgraded to a radio containing BL 0106 and will result in a "NO GSM" error.)" -http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=41&Itemid=27
The other question I would like to ask is this - it is possible to put another verion of WM6 on with this radio version?
Thanks for any advice!
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Hermes300 said:
Can anyone help me here!
Do I need to SIM unlock my PDA to update the ROM to a custom ROM, for example Schaps_WM6Pro_Hermes_4.30 which I recently downloaded from here.
At the moment it is locked to T-mobile. I have also updated the SPL to 2.10 olipro and the radio is at 1.50.00.00 and the HTC boot is 0108.
Thanks guys
Larry
Click to expand...
Click to collapse
I think you might not have gotten help 'cause it doesn't look like you've read what people pointed for you to read. Hopefully this'll help you get over the jargon hump and make progress. Having upgraded from the Offical T-Moble rom and swapped ROMs, it's definitely worth taking the time to learn how to do.
SIM unlock & CID unlock aren't the same.
If you've had you phone with T-Mobile for at least 3 month they will let Unlock you SIM (at least they do in the US). Contact them directly, you'll need an active account & phone number with them. This is free.
CID unlocking allows flashing ROMs onto your PDA. For some reason the folks at T-mobile, etc want you to have to look at their stuff every time you use a machine you bought through them. Using a cooked rom is like reinstalling XP without having AOL on your computer, makes life much better.
(flashing = installing to a PDA's Read Only Memory)
(ROM = OS + Radio + other stuff = basically everything thats on the PDA after a hard reset)
Flashing can be a dangerous thing, you don't want to 'brick' your PDA so you install an escape hatch. Hard SPL is that escape hatch.
(Brick = peice of baked clay = your PDA if a ROM install fails and you didn't install Hard SPL first)
The Hard SPL protects you if the ROM you installs fails 'cause power went out, ROM was bad, you bumped the cable, etc
http://forum.xda-developers.com/showthread.php?t=296722
Read & Follow the directions.
Select a ROM from here
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs
I have the same model & just installed Custel V2.5, seems to work well so far (day 2).
http://forum.xda-developers.com/showthread.php?t=364617
Good Luck
Thanks gt, and we have read advice on here but a lot of seems to be conflicting plus we seem to be just going round and round. Yep, ben there, yep read that etc.
I know the diff. between SIM and CID unlock but all I want to know is is it necessary to SIM unlock the phone to update a ROM?
I wont be using another network but will be staying with T-mobile W n W.
I did it!
Well I did it. flashed the phone with Schaps WM6 4.30 WWE.
Have noticed it runs faster than the previous T-Mobile WM6 and has some really neat features-you can adjust a lot more settings on the phone than before,quite impresed! Thanks for everyones help!
Okay.. I got a brand new touch dual last week, and off course, it seems to be sim locked.. It IS nice and shiny though. A silver version actually..!
Anyways, I did try the SuperSID and security unlocker.. But i'm kinda stuck at one of the first steps in the manual.. Checking your original radio version and downloading it.. It seems my Niki has radio version 1.58.21.24.. And that isn't available for download.. Anywhere.. :')
So.. I've got this phone on my desk, which i can look at, but can't use.. All brand new, nice and shiny..
I've been searching the forum to see if there's any way to dump my original radio, biut i guess to achieve that, the phone needs to be unlocked on forehand, right..? Any suggestions on how to go about this?
You can try with another radio, like the 1.58.21.23S, but first of all, be sure that you have a NIKI100, not a Neon or similar.
Well, the battery says NIKI160. But fortunately for me, underneath the battery on the phone itself, it says NIKI100.
So, according to the Niki SuperCID thread i can just skip installing original radio (step 8) and flash v. 23s..? Without consequences..?
Hi xxxneoxxx!
I know it's a while ago you were wondering if you could use the .23 radio.. But I'm still curious if you have tried it! And if you did, how does the dual perform?
Thanks!
I had to do that either, one of the two niki100 had a 1.64 radio, and when doing "step 1", it always crashed at 99%. So whay I did was first downgrade the radio to a 1.56, then run step 1, and finally flash back to another radio (random one), it worked perfectly...
Just remember to use spl 1.15 or the unlocker won't give you results...
Duplicated post, sorry...
Hi biktor_gj!
I've already installed spl 1.15. So that's one step in the right direction =)
But how is it possible you can use different types of radio's without any problems? Because several threads warn you for the damage a wrong radio can cause...
Well, after a while of reading up, i kinda gave up on it.. Found all kinds of info, none mentioning this radio version.
So i figured; i saved over 150 euros buying it locked, why not pay something to get it unlocked in return. I mean, unlocking isn't that expensive after all.
One of the infos i found was actually that over here in the Netherlands, unlocking your phone using an unlock code doesn't void your warranty, but using software to do it, does. So this was an extra reason find an alternative way. Eventuelly bought an unlock code. Went over to www.htccode.com and bought an unlocking code over there. Works like a charm.
I know, it might be the easy way to out, and if my radio version was mentioned in the unlocking thread i would have been more sure of the fact it WAS actually going to work properly, without the battery draining and stuff, but it wasn't mentioned, so i figured i was better off playing safe on this one..
Hi guys,
Mods - first time post and im not a regular user so if im breaking the rules i apologise. I have spent hours already trawling the forums, but i am now admitting defeat and I need your help!
My Problem:
I have an x7501 SPL 1.06 0000, WM 5.0, GERMAN OS
I want to upgrade this to WM6.1 ENGLISH
I dont care what the SPL is, as long as it works, is reliable, and wont disable any standard WM functionality
I am not interested in tweaks, hulks, or other (non standard) tricks, i just want to get the device running a stock WM 6.1 rom
That said - if you guys think that going to 6.5 is the best (non beta, no risk) option, then im quite happy to go that route.
$50 reward to the first person who provides the following info IN A FORMAT THAT I CAN UNDERSTAND. im good with computers for a non pro (and can follow instructions , but this is just over my head!
I Need:
1) Link to an unlocker and instructions how to use, that will give me the required SPL (note my SPL is 1.06 - will this require two SPL flash steps??)
2) Link to a stable ROM that retains all windows functionality, and instructions how to use it.
If i find that i used two or more peoples help i will split the reward accordingly!
thanks in advance and keep up the good work!
Alan K
First you need to download the unlocker from this thread and follow instructions... http://forum.xda-developers.com/showthread.php?t=315831
This will give you SPL 1.2
Here is a handy thread with step by step instructions on upgrading your roms you should read through before beginning to flash...http://forum.xda-developers.com/showthread.php?t=429013
Unfortunately, the stock-like wm6.5 roms made by michy-prima that ran on spl1.2 are no longer hosted on any sites anymore. I can try to contact him for you and see if I can get a copy directly from him. I will see if I can do that.
Otherwise, you can change your spl to 3.5, which you might as well do anyways, as there are more roms for that spl and even the stock-like michy-prima roms were made in spl3.5 also, so if I can get those, I will get the spl 3.5 versions.
So to then change your spl to 3.5, you must have first used unlocker to make spl 1.2, then the only way that was made to change spl to 3.5 was to flash the Athena Project 4 rom, so go to this thread... http://forum.xda-developers.com/showthread.php?t=387409 and download the AP ROM V.4, unzip it, and run the flasher while your phone is connected with active-sync to your computer. This will install the spl3.5 and the AP4 Rom.
Now that that is done, you can choose any SPL3.5 ROM to flash... (make sure to only flash SPL3.5 Roms now... if need be, there is a way to go back to SPL1.2 if you need to, but there really is no reason you would need to.)
Probably the most modern rom with the most features would be the AGB Version 3.00 ROM, The Hulk one (I know you said you didn't want that, but it is the most current rom, and you can easily change the theme and wallpaper on it. This is the ROM I have on my Athena... its a nice ROM.) Here is the thread for that ROM... http://forum.xda-developers.com/showthread.php?t=614158
Just unzip the rom after you download it, and like before, hook phone up to computer and let it sync, then run the installer. You can also use the ealier AGB roms, too, if they look better to you, or any rom you come across as long as it is a spl3.5 rom.
And I will try to contact michy-prima to see if I can get one of his old clean wm6.5 roms or his stock wm6.1 roms, but I wouldn't count on me being able to get one from him. Personally I think the newer AGB ROMs are alot better and more recent and updated and would recommend using them.
Also, here is a convenient thread I just found that has links to many different builds and useful tools and guides... http://forum.xda-developers.com/showthread.php?t=397518 ... so if you want to try out a couple wm6.1 while you have spl1.2 or even after flashing spl3.5, as a lot of roms are made for both spls. Just make sure you only flash roms made for the spl that you have on your phone.
I hope this helps... if you have any more questions, feel free to pm me and I'll be glad to help. Happy flashing!
Hi Zarathustrax,
Thanks for the extensive instructions. I will be checking it this week so hopefully ill be sending you some greenbacks by Friday!
Thanks again!
Al
bigalk said:
Hi Zarathustrax,
Thanks for the extensive instructions. I will be checking it this week so hopefully ill be sending you some greenbacks by Friday!
Thanks again!
Al
Click to expand...
Click to collapse
Like I said, if you have any more questions or problems, feel free to ask here or pm me.
Sent from my HTC HD2 using XDA App
Also, if you prefer to have a winmo 6.1 ROM over the 6.5 ROM I suggested, there are links to many 6.1 ROMs in that last thread I linked. Here's the link again... http://forum.xda-developers.com/showthread.php?t=397518
MichyPrima's roms are no longer hosted, but I have heard good things about Taxists and Sogarths ROMs. You can easily try a rom and then flash another if you don't like it. Just remember, make sure to flash roms for the spl that you have. If you have SPL3.5 and want a spl1.2 rom, there are links to the tool to change back to spl1.2. The only way to go from spl 1.2 to spl 3.5 is to flash the Athena Project 4 ROM, then after that you can flash any spl3.5 you want. Let me know if you have any other questions or concerns.
Hi Zarathustrax,
just to let you know - i still havent managed to allocate time to this yet.
I havent forgotten about you, and im not pulling a fast one!
thanks again for your time and effort!
Al
Hi Zarathustrax,
In the very first step (unlocker link) Olipro says "follow the steps...."
I cant see the steps he mentions anywhere? This is one of the reasons for my original post
any ideas?
Al
Forget my last question - unlocker has the steps!
Hi Zarathustrax,
tried twice and i keep getting error 202 - "check cables....... cannot connect to phone"
I have:
1) connected and synced via active sync
2) set active sync not to sync any items except for files
any ideas?
thanks
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
bigalk said:
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
Click to expand...
Click to collapse
Hmmm... might be. I'll look into this and see if I can figure anything out.
Oh, by the way, sorry I missed your messages until now. I don't check these forums daily, so if you need to contact me quicker, send a private message to me.
bigalk said:
Hi Zarathustrax,
tried twice and i keep getting error 202 - "check cables....... cannot connect to phone"
I have:
1) connected and synced via active sync
2) set active sync not to sync any items except for files
any ideas?
thanks
Click to expand...
Click to collapse
I've been reading through the forums trying to find an answer... at what point does it show this error? Is it right away? Does the x7501 change screen at all or do anything? I think I remember having problems like this when I unlocked it years ago... but can't remember exactly what I did. Does the x7501 go to it's tricolored bootloader screen at all? It maybe is having problems installing usb drivers while it's in bootloader mode if it changes into bootloader mode when you get that error. Let me know asap so we can get this solved. Also, have you tried using another cable at all?
Putting phone in usb Mode
Try installing Enablerapi.cab before using the olipro unlocker.
Are you still on this
When you run the unlocker there are 3 steps - these are three separate buttons that appear on the flasher each time.
Can you indicate at which step you get this error? Go to this link
http://forum.xda-developers.com/showthread.php?t=378216
...IT IS IN GERMAN...but it gives very nice pics of the process...using google translate you can get some idea. BUT if you can indicate which step you were able to complete.....we can help better !
Also, what windows operating system?
bigalk said:
Ive tried everything i can. ALL windows updates installed (along with .net 2.0)
AV disabled
Athenaunlocker added to firewall exceptions - im on a work network so firewall is controlled through group policy - so i cant completely disable. do you think this might be the problem?
Click to expand...
Click to collapse
chappatti said:
When you run the unlocker there are 3 steps - these are three separate buttons that appear on the flasher each time.
Can you indicate at which step you get this error? Go to this link
http://forum.xda-developers.com/showthread.php?t=378216
...IT IS IN GERMAN...but it gives very nice pics of the process...using google translate you can get some idea. BUT if you can indicate which step you were able to complete.....we can help better !
Also, what windows operating system?
Click to expand...
Click to collapse
I'm kinda thinking he gave up or something.... I've pm'ed him and have been trying to get more info on his problem for a couple weeks. I think he was having the problem on the first step... and the enablerapi will probably solve his problem.
But doing all this reading and trying to solve this problem has got me to pull out my old athena and start playing with it again... it's been a couple years since I've used it... I'm on the HD2 now, dualbooting WP7 and android.... but I've gotten an interest in getting my athena set-up and working again. The athena was way ahead of it's time.... if we could get devs interested in it again and get a good android build ported over, it would make an awesome tablet/phone. I think I'm gonna try to play around with getting android booting on it, but my knowledge of linux and low-level kernel work is limited to none. The best I can do is try to put together a build with what kernels/tools are already out and working on the athena, which isn't much. I think they had it booting and got touch screen working, but not much past that.
Hi zarathustrax,
no i havent given up . was checking in regularly to see if i had any response from you but never even looked at the pms. sorry.
i have a few hours to crack into this now so ive set up on a new machine (different av and firewall) and im going to have a go.
will report back - thanks for all the additional info my man!
al
ok - so i unlocked successfully but i think i may have fcked up. when i read olipros unlocker thread its says that only step 1 is necessary, ("but if you do step 2 you must also do step 3")
as i was trying to get to spl 3.5 i presumed that i didnt need to do step 2 or 3. this might have been a bad choice.
heres what happened:
ran unlocker step 1, it worked, phone rebooted. i finished there as i wasnt sure if i needed step 2 or 3
loaded bootloader screen to check spl. spl said olipro 1.2. i though cool - rebooted phone and now its a black screen. i can get into the bootloader screen whish says:
ATHE100
IPL-V1.00
ATHE100
SPL-V1.20. Olipro
have been reading up on next steps, or how to get rid of blackscreen but no conclusive answer.
its friday so im off home - battle lost but the war aint over!
Well. I'm not an expert (my Ameo was unlocked as I bought it) but if I understand, the black screen is because the ROM on your device dont match the new SPL you have. Try to flash a new ROM (SPL 1.2, right?) should help.
bigalk said:
ok - so i unlocked successfully but i think i may have fcked up. when i read olipros unlocker thread its says that only step 1 is necessary, ("but if you do step 2 you must also do step 3")
as i was trying to get to spl 3.5 i presumed that i didnt need to do step 2 or 3. this might have been a bad choice.
heres what happened:
ran unlocker step 1, it worked, phone rebooted. i finished there as i wasnt sure if i needed step 2 or 3
loaded bootloader screen to check spl. spl said olipro 1.2. i though cool - rebooted phone and now its a black screen. i can get into the bootloader screen whish says:
ATHE100
IPL-V1.00
ATHE100
SPL-V1.20. Olipro
have been reading up on next steps, or how to get rid of blackscreen but no conclusive answer.
its friday so im off home - battle lost but the war aint over!
Click to expand...
Click to collapse
Just replied to your pm before checking this thread, so I see that you can still get to SPL bootloader screen. So, what you should be able to do now is get your phone to bootloader screen and hook it up to pc like that. Then let any drivers that are installing finish, and where it says "serial" at the bottom should change to "USB".
At this point, you can now run a custom rom installer and flash a new rom. Since you want to change to SPL3.5, you should install the Athena Project 4 ROM.
Or if you want to leave it at this SPL for a while and test out a couple WM6.1 ROMS that use this SPL, just flash one of these. Here's a good thread that lists almost every ROM available with links and says what SPL they're for... http://forum.xda-developers.com/showthread.php?t=397518
I'll do a little more research also about the screen not coming on to make sure it's not some other problem, but it probably is just the current rom isn't compatible with the new SPL.
I'm sending this post to your pm too.
Also, make sure you have the SD card and sim card removed when doing flashing. And check what radio you have on your phone... you must have atleast radio 1.50 or higher to use Athena Project 4 or most WM6.1 or WM6.5 ROMS.