Hi,
I have a G3 Prophet, I did flash it with WM6 before & it worked but now every time i try to flash with [pdaviet] 4.0.0.0.4s_pv or other WM6 roms i get the same freakin error " Could not update itsutils.dll to the current version, maybe its in use?"
I tried restarting my activesync & rebooted the pc (winxp), The funny thing is when i try to flash with the NOID WM5 flash it works great.
I also flashed a G4 Prophet & it worked.
Before reflashing...
U need to downgrade to WM5 OEM with e.g : RUU_Prophet_220734_2207114_024721_NVID
(Look for on this board )
I had the same problem.
+
0pal said:
U need to downgrade to WM5 OEM with e.g : RUU_Prophet_220734_2207114_024721_NVID
(Look for on this board )
I had the same problem.
+
Click to expand...
Click to collapse
I did that already using the same file "sharebigfile.com_RUU_Prophet_220734_2207114_024721_NVID" & i understand that once i get to the boot screen, i need to flash to WM6 but it just doesnt work.
Any other suggestions ??
naser404 said:
I did that already using the same file "sharebigfile.com_RUU_Prophet_220734_2207114_024721_NVID" & i understand that once i get to the boot screen, i need to flash to WM6 but it just doesnt work.
Any other suggestions ??
Click to expand...
Click to collapse
1.When you get to the boot screen, let WM5 start, tap once and do a hard reset.
2.Load WM6.
I just tried that, still no go. ANy other suggestions ?
naser404 said:
Hi,
I have a G3 Prophet, I did flash it with WM6 before & it worked but now every time i try to flash with [pdaviet] 4.0.0.0.4s_pv or other WM6 roms i get the same freakin error " Could not update itsutils.dll to the current version, maybe its in use?"
I tried restarting my activesync & rebooted the pc (winxp), The funny thing is when i try to flash with the NOID WM5 flash it works great.
I also flashed a G4 Prophet & it worked.
Click to expand...
Click to collapse
If you followed exactly what others suggested, it should be okay. Read the Sticky notes on top of the forum and follow EXACTLY word by word.
If you think you have done so but still failed, there is another way to get around the "itsutils.dll in use" problem -- just copy the 2 .cabs (Cert_SPCS.cab and EnableRapi.cab) in the folder of the new ROM, into the PPC phone any directory and run them. then repeat the 2nd step. It will go away. But that is not a clean method.
Hope it helps. Good luck.
SeaPea said:
If you followed exactly what others suggested, it should be okay. Read the Sticky notes on top of the forum and follow EXACTLY word by word.
If you think you have done so but still failed, there is another way to get around the "itsutils.dll in use" problem -- just copy the 2 .cabs (Cert_SPCS.cab and EnableRapi.cab) in the folder of the new ROM, into the PPC phone any directory and run them. then repeat the 2nd step. It will go away. But that is not a clean method.
Hope it helps. Good luck.
Click to expand...
Click to collapse
and remember to use the correct G3 ROMUpdateUtility.exe file in the first step!
SeaPea said:
If you think you have done so but still failed, there is another way to get around the "itsutils.dll in use" problem -- just copy the 2 .cabs (Cert_SPCS.cab and EnableRapi.cab) in the folder of the new ROM, into the PPC phone any directory and run them. then repeat the 2nd step. It will go away. But that is not a clean method.
Hope it helps. Good luck.
Click to expand...
Click to collapse
Just wanted to thank you SeaPea, it "Finally" worked & i hope i can pay you back.
1 question though, what do you mean by not a clean method ?
Thanx again
hi naser404,
i also got same problem when upgrading wm6
1.Finished step1 (downgrade to wm5nvid)
2.Restart ppc, show welcome screen and .....
3.Windows will inform you to do setting (activesync)<---don't do this part
4.click cancel and windows will use "Guest" to link with ppc
5.run upgrade.bat
hope it can help you
P.S.my english is not good, just try to give you some advise
Hang83 said:
hi naser404,
i also got same problem when upgrading wm6
1.Finished step1 (downgrade to wm5nvid)
2.Restart ppc, show welcome screen and .....
3.Windows will inform you to do setting (activesync)<---don't do this part
4.click cancel and windows will use "Guest" to link with ppc
5.run upgrade.bat
hope it can help you
P.S.my english is not good, just try to give you some advise
Click to expand...
Click to collapse
Thanx a lot Hang83, I'll give that also a go & see how things work. I am greatfull to all you guys for the help.
Naser
Related
Hey.. i use this new Fantastic Mobiz v2.0b4! rom (amazing rom)
But i get this error that i posted in the topic from time to time..
Any idea what it might be and how to fix it? i searched for it on the forum but i dident find any topics
Thanks for answers
Error again:
cannot execute \windows\nrdwakeup.exe
after flashing the rom,hard reset your phone.
tonydeli7 said:
after flashing the rom,hard reset your phone.
Click to expand...
Click to collapse
Yep. Did that .. :S
this is because you use novii remote right? this happens if you execute the program without preinstalling it after phone main memory format.
install Memmaid(or Pocket mechanic),and find the notification "\windows\nrdwakeup.exe".Delete it,and it should be ok...
zeroed said:
this is because you use novii remote right? this happens if you execute the program without preinstalling it after phone main memory format.
Click to expand...
Click to collapse
Hi Zeroed,
Thanks for the tips.
I was having the same problem too after flashing with new ROM.
Problem solved after reinstalling the software.
Hi.
During upgrade to Crystal V3, I get this error at the end:
Please look at attached image...
Anyone knows what the fault is?
PS. This is the new Prophet that I got as a replacement for the old, bricked one...
Regards.
Try to move the install folder to C:/
I'm not sure if it is the same error message, but months ago I had the same prob and after this it worked.
Good luck
Tried, no luck...
hifiasylum said:
Tried, no luck...
Click to expand...
Click to collapse
reset phone and restart PC.. after that install aku 2.2 and retry..
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
hifiasylum said:
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
Click to expand...
Click to collapse
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Did you perform step1 before running Crystal upgrade?
I had the same problem... It worked successfully on a different computer.
panda88 said:
Did you perform step1 before running Crystal upgrade?
Click to expand...
Click to collapse
Yes, I allways downgrade before I upgrade.
Really, I do.
l3v5y said:
I had the same problem... It worked successfully on a different computer.
Click to expand...
Click to collapse
I have now tried 6 different computers, no luck. Believe that the fault is that I must unlock the phone or something. Donno, maybe the easiest thing is to sell the whole phone and get one a little more "programming friendly"?
dkleuven said:
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Click to expand...
Click to collapse
You dont think this will in some way or the other f_ _k up my Prophet?
hifiasylum said:
You dont think this will in some way or the other f_ _k up my Prophet?
Click to expand...
Click to collapse
It shouln't!
I saw from one of the thread, somebody also has the same exact problem, this is caused by the path is too long. It is suggested to put it in C:\, which you said you have done. The other person reported that it's working after he moved the installation file. I dun understand why it wouldn't work with yours.
Here is the post, finally found it:
http://forum.xda-developers.com/showthread.php?p=1549150#post1549150
User reported the problem was solved in #318
did u unlock CID yet?
Hi again. Found the problem. It seems that I was using a somewhat corrupt downloaded rom. The rom was ok, but it must have been destroyed during the downloadprocess.
Now the phone has Gullum Touch IX installed and works like a charm.
Thank for all your help, great forum!
Regards, Lars
818pro problem during upgrade to wm6
hai..
during upgrade my dopod 818pro to wm6, suddenly blackout and my upgrading was disrupted.. i reset back my dopod 818pro to continue back my upgrading..
but, I'm facing a problem which it's just hanging at start up screen..
i already try hard reset many time, but still can't to operate..
i just want to synchronize back to my pc to continue back my upgrading...
could somebody help me to this matter.. i don't know what to do now..
if it can enter bootloader, check the wiki for recovery, and follow it through.
Hi guys,
Today I tried to upgade my prohet to wm6. I used crystal v4 rom and followed the instructions from the sticky topic:
http://forum.xda-developers.com/showthread.php?t=350033
Everything went well and the process ended with 100% upload. However after flashing the screed went red,green blue and the only things on the display are:
"IPL 2.10.001
SPL 2.10.001"
I tried to restart the phone and to hard reset it but the screen is always the same.
What can I do about it?
I managed to upload RUU_Prophet_220734_2207114_024721_NVID rom and my prophet works again. Subject to be closed.
kordi666 said:
I managed to upload RUU_Prophet_220734_2207114_024721_NVID rom and my prophet works again. Subject to be closed.
Click to expand...
Click to collapse
If you flash using the "NEW" method, be sure that your SPL is 2.GX.4PDA before flashing the ROM (you have a G4 device, so 2.G4.4PDA.).
kordi666 said:
Hi guys,
Today I tried to upgade my prohet to wm6. I used crystal v4 rom and followed the instructions from the sticky topic:
http://forum.xda-developers.com/showthread.php?t=350033
Everything went well and the process ended with 100% upload. However after flashing the screed went red,green blue and the only things on the display are:
"IPL 2.10.001
SPL 2.10.001"
I tried to restart the phone and to hard reset it but the screen is always the same.
What can I do about it?
Click to expand...
Click to collapse
it normal. i suppose everyone has done the same.
but there is the solution but at first it is suggested:
DON'T PANIC
give a look to my old post here.
http://forum.xda-developers.com/showthread.php?p=1739879#post1739879
i found useful the guide of gullum that i'll never stop to thank.
don't warry you can restore everything.
jork
jork said:
it normal. i suppose everyone has done the same.
but there is the solution but at first it is suggested:
DON'T PANIC
..
Click to expand...
Click to collapse
also you can have a look to the link @ my signature ^_^, simple and helpful .....
Hello guys, i own a stock vodafone TP. I've tried several rom updates however all of them stuck at the beginning where it shows the % bar, it starts and stuck at 0 %.
the latest rom i've tried was "EnergyROM 2.0 40509" i did it through the "EnergyROM Upgrade.exe".
is there anything i'm missing here??
help me please..
if u can extract the *.nbh file (assuming it is inside the EnergyROM Upgrade.exe), then u can try flash using microSD. And u should post in EnergyROM thread.
krot84 said:
Hello guys, i own a stock vodafone TP. I've tried several rom updates however all of them stuck at the beginning where it shows the % bar, it starts and stuck at 0 %.
the latest rom i've tried was "EnergyROM 2.0 40509" i did it through the "EnergyROM Upgrade.exe".
is there anything i'm missing here??
help me please..
Click to expand...
Click to collapse
Hard SPL maybe
Shazad.K said:
Hard SPL maybe
Click to expand...
Click to collapse
Oh yeah, he said he did several rom updates but didnt mention custom or stock rom
monx® said:
Oh yeah, he said he did several rom updates but didnt mention custom or stock rom
Click to expand...
Click to collapse
indeed they were custom rom
ok i'll try the flash trough my SDHC. hopefully
krot84 said:
indeed they were custom rom
ok i'll try the flash trough my SDHC. hopefully
Click to expand...
Click to collapse
if i am reading your post correctly, you've never been able to flash a custom rom. If this is the case, have you "hard spl" your phone as yet?
Yes you're right. maybe i mixed up with the whole process of the hard spl even though i had read the guide several times .
First HSPL your phone...
Then Flash the ROM of your choice...
And READ, READ, READ, READ a lot, before...
thanks man!!! i'll try
pbmestre said:
First HSPL your phone...
Then Flash the ROM of your choice...
And READ, READ, READ, READ a lot, before...
Click to expand...
Click to collapse
So i have tried to Hspl my phone using http://forum.xda-developers.com/showthread.php?t=448008 guide, but no luck.
first i tried to run the RaphaelHardSPL-Unsigned_190_1_3.exe but it said that there was an error, then i used the SSPLManual.exe the phone turned black and an icon appeared on my pc's task bar saying there's a new "something" - (can't remember the actual name) found. And that was it.
what should i do next because i saw at the bootloader that the spl remained the same..
krot84 said:
So i have tried to Hspl my phone using http://forum.xda-developers.com/showthread.php?t=448008 guide, but no luck.
first i tried to run the RaphaelHardSPL-Unsigned_190_1_3.exe but it said that there was an error, then i used the SSPLManual.exe the phone turned black and an icon appeared on my pc's task bar saying there's a new "something" - (can't remember the actual name) found. And that was it.
what should i do next because i saw at the bootloader that the spl remained the same..
Click to expand...
Click to collapse
leave the phone plugged in when it says installing "something." even if it takes 5 minutes...let it sit until the computer installs the driver.
then run the spl again. this happens to me every now and then. just give it time to install the driver.
you ment to run the RaphaelHardSPL-Unsigned_190_1_3.exe from my computer ??
yes...
it needs to install the driver for flashing the device.. on the pc.. when it done the hardwarewizard tell you that it works.. after that start the hardspl prog
thanks, i'll give it a try later on this day 'cause i'm at work now
that would be the best option
i doubt ur systemcommander let you install anything like drivers and tools to withstand his authority lol
LOL i don't think anybody minds what i do on my computer here at work..
then whats the wait ? hehe
mmm the data cable i guess... don't have it here
lmao
oke oke u got me there
(they're like 3 bucks in most local stores (not that im an addict or anything (a)))
not at all )
by the way, i've tried yesterday to do exactly as you told but no luck.
after i used the SSPLManual and pressed the RaphaelHardSPL-Unsigned_190_1_3.exe it said " error - there's a problem operating or something like that"
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
A.Calamita said:
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
Click to expand...
Click to collapse
No sir; Stock ROM don't need HSPL, (and certainly not in combination with 3.14 stock ROM)
Error 266 is a connection problem; are you well connected over active sync? did you disconnect AntiVirus temporary?
From where do you get start Home-screen or Boot-screen?
Witch stock rom are you trying to install?
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
A.Calamita said:
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
Click to expand...
Click to collapse
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
kurt-willems said:
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
Click to expand...
Click to collapse
I've tried it from the homescreen (I think) Whats the difference? I plugged in the usb cable and selected activesync mode. Then as it starts to gather information it changes to the bootloader.
I've tried different usb ports. Also tried a hub. I've rebooted my laptop and phone many times.
And I've also tried running as an administrator.
I don't suppose that you can unpack the .exe and transfer it to the memory card and run it from there?
And I don't suppose having HTC Sense disabled would cause any issue.
I could try a hard reset. Although it would restore it (would do once its updated ROM anyway) but I don't want to have to set it all up again if the update doesn't work.
Any more idea's?
Thanks,
Al
Okay; strange.
Try than to flash over SD.
- Take your "RUU_Leo_S_HTC_..." file and extract the "RUU_signed.nbh" file from the ROM, rename it to "leoimg.nbh" without ""
- Place the "leoimg.nbh" on the root of ur SD.
- Reset the device while pressing the volume down button.
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
A.Calamita said:
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
Click to expand...
Click to collapse
PS, don't forget to use a SD < 8 GB (a 2GB SD would be perfect) and format it by FAT32
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Software update failed. Please try again :O
Will it have bricked it?
A.Calamita said:
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Click to expand...
Click to collapse
Because 8GB SD cards or bigger caused problems.
A.Calamita said:
Software update failed. Please try again :O
Will it have bricked it?
Click to expand...
Click to collapse
Did you use a <8GB SD?
when you downloaded the stock ROM from the HTC webpage you used your S/N?
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
A.Calamita said:
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
Click to expand...
Click to collapse
Fine to see it's working now. Have fun.