Hello all,
Well stupid me decided to upgrade my Rogers branded Hermes200 (TtYN) to wm6 without knowing everything I needed to. Installed HardSPL and then the HK English rom.
Phone portion works great
After searching and reading, I found the settings for connecting to the Internet for Rogers. Great.
Tried setting up active synce and it gave me the certificate not vailid error.... installed the cert on the new rom and with the h200 hooked up via usb to the computer it syncs up with my exchange server perfectly.
When I disconnect from the PC, direct push stops working....
When I force a send/receive.... it sits at 'connecting...' for a few minutes and if I'm lucking enough to be watching, it comes back with a 'connection error' message on the status bar before it flips back to number of messages in the inbox display...
The one BIG thing (not sure if it is big) is with the original ROM I'd get a 3G connection with serfing the net, doing data transfers, now I get an H connection, not sure if that is the issue, but it is the only thing I can see right now....
Any suggestions?
obiwan05 said:
The one BIG thing (not sure if it is big) is with the original ROM I'd get a 3G connection with serfing the net, doing data transfers, now I get an H connection, not sure if that is the issue, but it is the only thing I can see right now....
Any suggestions?
Click to expand...
Click to collapse
I can't really comment on the others, but your H vs. 3G issue isn't an issue at all. The fact that your device shows H just means that you have access to Rogers' new Vision network (HSPDA). Cooked ROMs use an H to differentiate HSDPA (3.5 generations technology, faster) from the 3G for UMTS (3rd generation technology, fast but not the fastest). Because HSPDA is an enhancement of UMTS and is built on top of it, a lot of Windows Mobile 5 ROMS (like the stock Rogers ROM) don't differentiate the fact that it's an HSDPA connection, even though it is, and just show a generic "3G". So... rest assured, the H thing is not a bad thing.
I bought a 8525 off ebay and the wi-fi is not talking to my local network. Essentially it will connect to a secured network but you cant pull anything up from IE. You can see unsecured networks and can sometimes connect to them but pull up nothing in IE. I have tested it every which a way from home and out at a friends business location and not getting any good results..
Here is the version info:
rom 3.57.502.1
rom date 7-10-07
radio 1.48.00.00
proto ver 32.81.7020.20h
I see links on here for different versions but I am not sure which one will get me to WM5. I am experienced with a lot of Internet things but this is not one of them. I just want to have a regular phone that can get wi-fi access and all the normal extras.
Also, should I go to WM6 after I get 5 working?
thanks
found 1 fix....I disabled the proxy which seemed to allow the internet to work.
since the bluetooth and usb are acting weird i had to email myself a file to show the extended ROM.....
not sure where to go from here to get back to wm5 or even 6.
Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
I've also tried a few registry edits, and used all variations of modem scripts, and got all the dialup info from verizon directly (so I know it was right ) but could not get dialup to work either. Usually not detecting a carrier, other times lockups.
I truely want to get the bluetooth-PAN working again as it did on my tilt. Anyone have this working on the MAc with a XV6800 on verizon?
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Cycomachead said:
i did have it working before. I'm wondering if you might be more successful with a custom rom. Verizon installs software (at least previous roms, I haven't tested the MR1 rom) that reverts reg edits and keeps it working like VzW wants it to. This could be causing problems. First check after a soft-reset to make sure your reg edits still exist.
Also I'm sure you've tried this be in Leopard's bluetooth setup delete the phone and try again. You need to select the type of device as any device in order for leopard to see it. Can you connect the device to your mac? Try that first. If you get a BT connection non-internet connection and you change your settings delete the phone and try again. I forget some of the setting I used. Also Engadget had a how to article for BT pan using the xv6700 and Tiger most of the information is still useful. It's a couple years old so you might have a hard time finding it.
Hope some of that helps.
Click to expand...
Click to collapse
As mentioned, I have tried a ton of different methods to try and use the data connection, from using dialup settings, to trying to get the Bluetooth Pan working. I've removed and re-paired the device from my mac, flashed roms, hacked away at the registry a ton of times. Nothing seems to give so far.
I've got one more suggestion, found here: http://forum.xda-developers.com/showpost.php?p=1794133&postcount=29
I'm going to give this a shot tomorrow and will let you know how it goes.
Eponymous069 said:
Hey all,
So I've got a small issue. I've got a Verizon XV6800 with the MR1 Rom WM6.1, Valhalla GPS server, 3.42.50 Radio.
Internet connection sharing is not working at this point. I've gone through the winmodem and internet connection sharing cab installs, registry edits, etc. None seem to help.
I previously had a ATT tilt 8925 and had no issues whatsoever tethering it to my mac by just pairing the phone, selecting to "Using a direct Higher speed connection to reach your ISP". Starting Internet Sharing on the phone, selecting Bluetooth PAN & the default data connection, then selecting connect. Then selecting "Connect to network" On the mac through the my phone listed in the bluetooth connections. That simple.
Having installed the "Internet Sharing" cab onto the phone. Internet sharing appears to work, but the phone does not advertise this service, like the ATT tilt did on ATT's network.
Click to expand...
Click to collapse
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
thetaz01 said:
I was wondering if you be gracious enough to share the Internet sharing CAB i only need to get it to work thought the USB cable and on a windows box, and from what im getting you got that far... JUST not working on a mac...
if thats the case, i would be ever so greatful..
Thanks
Click to expand...
Click to collapse
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Eponymous069 said:
You can use the link from the previous post here, and just copy the dll's and exe to the Windows directory, and place teh shortcut into the Device\Windows\Start Menu\Programs\ directory.
Click to expand...
Click to collapse
hey, ok great, i just downloaded the file, Just one question..
The file i downloaded has about a page of Reg Key changes, you didnt mention that in your "thngs to do"
Just want to see if i am to make all those changes or not.
thanks
So, your problem is in getting the internet connection to work and not connecting it to the mac, right? Does your mac recognize the phone as a modem?
If you're using MR1 I think you might need to hard reset and the soft reset right before the Verizon customizations run. You won't be able to run their apps but there won't be software to cripple the phone.
i have the same exact issue i have a new macbook pro and the bluetooth connects however the speed is slower then dial up it works perfectly however on bootcamp apple has to change the drivers
So more results.
I tried all the registry edits, (much easier with CD-Regedit so you can make the changes on your desktop) and now internet sharing does not even allow me to select a connection type, it had worked previously.
The only thing that was missing before I made the registry changes was that when I pair the phone, in the services listed, "Network Access Point" is not one of the listed services. My old phone has this service listed, and this is how I used it, where I started internet sharing on the phone, then selected the bluetooth device (phone) on the mac and selected: "Connect to Network) and it worked flawless.
Back to the drawing board. I'm going to try next to re-flash the MR1 rom and do as Cycomachead suggested and stop verizons customizations from happening.
bryanw17, what were the exact settings you used for dialup on the mac. The modem script used is probably the most important piece.
Number: #777
Username: Phonenumber (or [email protected]????)
Password: (We know this one, not sure if it's legal to post though)
Darn, I wish I could provide more help. It is indeed possible in Leopard, I had it going before I began flashing my phone - and I no longer have a data plan to test, otherwise I'd be using it a lot more!
aparently no one with a new macbook pro can get bluetooth pan to work. I have it connected however the drivers for the new macbook pro do not provide a good connection if you search the mac forums theyve been talking about it on there. I dont use a username n password however because i use the internet sharing app for the moment i am using wmwifirouter to connect online however my xv6800 doesnt charge at the same time for some reason so u can only use it till the battery dies
So some more results.
I installed ICS and all the registry edits. Then the internet Connection Sharing did not function at all. I verified the registry settings, all were fine. So no dice with me.
So back to the drawing board.
I installed a previous rom. DCD 3.2.6, and guess what? From initial flash of the phone and initial setup, no apps installed, no hacking, ICS runs and provides a network connection to my mac perfect. I also instantly notice when I pair it through bluetooth, it allows the option of "Access this device as a network port". And "Network Access point" is listed as an offered service.
I installed newer rom DCD 3.3.4, and the MR1 Rom. Neither have ICS installed initially. I can install the two files: intshare.dll and IntShrUI.exe into the windows directory without any reg edits, and then ICS works on the phone, but then pairing the phone to the Mac, and attempting to discover teh PAN service is unsuccessful. It only is discovered as a Dialup Access device, and not a "Network Access Point".
So, It appears I can get internet Sharing via Bluetooth PAN to function on the phone no matter which rom, but have not figure out how to tell the mac, or trick the mac, into thinking the "Network Access Point" service is available.
I have pulled completed registry dumps with CE-Regedit and compared the differences between the two, which there are quite a few, but not sure how to export these differences with the program so I can apply them to the other roms registry. I guess I might try a fukll backup and then restore to the new(er) rom and cross my fingers.
I'd stay with the 3.2.6 rom. and 3.42.50 Radio, with PRI 2.03, but I can only seem to make the GPS function successfully with the MR1 stock verizon rom.
Anybody want to take the two regs files compare, and see if they can find out where we can make the change to have the phone advertise the service "Network Access Point" when being paired to the mac or PC?
On one last note. I also tried the method of restoring the MR1 official rom, and then not allowing the customizations. ICS will function, but again, not advertising the service: "Network Access Point" when pairing, so it's not recognized as a valid networking method.
Where did you get those files (intshare.dll and IntShrUI.exe) to allow ICS via bluetooth?
Nevermind, I found it on PPCGeeks.
Don't know why DCD disabled the BT DUN on ICS.
I use Missing sync, and I turned on PAN then added my phone and it shoed it as a modem when I added it, but my BT connection is fairly Unrealible compared to the USB teather on Bootcamp
i was under the impression that bt pan has been whacked on macbook pro models starting from early 2008 on. anything earlier than that and it seems to work great. does anyone know why bt pan doesnt work on the newer machines and how to get it to work?
I'm sorry if this is an obvious question, but I've spent a good portion of the afternoon trying to find an answer using the various search functions on the XDA site with no luck.
Today I flashed my ROM on my Sprint Mogul for the first time (because I finally got tired of the standard package...) with the following steps...
1. Used Hard-SPL 2.40 via USB connection to unlock
2. Installed Titan Radio ROM 3.42.50 from SD card
3. Installed Titan WM6.5 21139 CR2 via USB connection
4. Rebooted at completion, and Windows Mobile 6.5 started up perfectly!
5. Found that phone would not connect to Data Connection (#777)
6. Downloaded and installed DCD Sprint Carrier CAB from dcd's website
However, I don't know if my phone connects to Sprint via #777. My wireless connection is working fine, but when I disable wireless and try to open IE or similar programs, my "Connectivity" icon at the top of my phone will indicate a connection has been established, but it says "Sprint PCS (Dial-up)" is connected. Does this mean that I have connected via #777 to my Sprint Data Plan, or is this some other function I am not familiar with? This could be the simplest answer in the history of questions, but it just looks different than it did before I flashed the ROM.
Thanks for your answers!
#777 will be your your data plan. if you dont have a data plan you will be charged
No, one of the tweaks with that is that it does not display the connection dialog (balloon that pops down saying "Dialing #777...", etc.). It only says 'Dial-up' because of the way DCD constructed the carrier CAB at the time. It is no different from your standard Sprint Data Plan.
yes it does look different. but bottom line is you are still connecting like you were before with 777. it is just different. there is NO other way to connect.
Hi All
I have an ex T-Mobile HTC HD2 running windows 6.5 and connected to O2.
Mostly everything works fine except . . . . .
When I try to download an MMS message the phone tries to use the T-Mobile network and as this is not set up, it doesn;t work.
It tries to use t-Mobile even when connected to wifi
I have tried getting onto the network manager but all the T-Mobile settings are greyed out. and there is no option to delete the entry (edit, press and hold gives no options).
Network manager is set to use O2 (Connect to internet and Private network)
So, please, how do I get rig of T-Mobile and default to O2.
I presume it some registry hack?
TFAI
Try downloading & install this connection settings tool by HTC >
http://forum.xda-developers.com/attachment.php?attachmentid=565785&d=1302516709
Once installed it will have a shortcut link in Settings, Connections, Connection Setup
Run it & choose country 'UK' & network provider 'O2' *be sure choose postpay or prepay*
It should load all setting including MMS.
If have issues post back for more help.
Another good option would be debranding your HD2 with either standard generic HTC ROM or Custom ROM such as Energy, links can be found in HD2 Wiki > http://forum.xda-developers.com/wiki/HTC_HD2#ROM_Development
Thanks for that.
Sadly not a huge success. cab downloaded and installed.
Run, reset, set up connection, reset etc
Eventually Settings, Connections, Connection Setup select O2 postpay and another restart just in case
Then
Wireless Controls, Data Connection, but it wont conect. (Slider wont go green)
Wifi Conection greyed out.
Total mess.
Back to Conection Setup and check but its set to UK, O2 postpay
I have Data Controller installed but that allows all O2 (MMS postpay and mobile web)
At least I could access the www before
How do I get out of this mess
TFAI
I would try removing data controller as that has some known issues of messing up the connection settings in registry.
I use GB-SOFT GPRS UMTS tweak which auto disconnects gprs when not used (set time to zero).
So in review >
remove Data controller & soft reset
Go into Settings>Connections>Connections>select 'manage existing connections' & delete any settings remaining
re-run Connection Setup & see if works !
I've never had trouble on provider roms such as T-Mobile so assume will be messy registry problem.
If no joy, post again & I will try dig up a guide & settings for O2 for manually trying input GPRS & MMS.
Good fix would be Custom WM6.5.5 such as one in my signature.
hhhmmm struggling. I can find no sensible way of uninstalling the Data controller. There is no entry on the list of programs to uninstall and I cant identify a directory.
There is a shortcut that points to \Windows\DataController.exe but is removing the program enough?
Good news is that I can Wireless stuff now works (My fault, I had forgotten they dont work when usb is connected to PC) So the only problem is MMS. Mor efiddling around, reran the HTC thing. Deleted an old connection and reboote a couple of times and eventually it worked.
And they call this a science!!
Thanks for you help
^ So is MMS now working !
If not I will post a manual MMS settings guide I have for WM6.5 somewhere.
Just removing the datacontroller.exe wouldn't be enough really, what really wanted is registry for it removed.
From your comments sounds like was mainly dirty connection settings in registry.
Data & MMS connections can be bit of a pain in WM6.5 but once learned manually or if the htc connections settings tool works perfectly they are better than android or iphone for flexibility & control.