Hello to all, they are Italian, I know little English, I hope makes to understand me.
My hurricane SDA 2 T/MOBILE after a download failed screen white man. even if I try to hold pressed the keys right and left under the screen and power for 1,5 second does not work, also has tried to press the key room with usb but it does not work I have read from some part that e' possible to install firmware in mini sd but I do not know like making.
me you can help
thanks
Related
i donwloaded something and putted it on my xda II, now it says serial and at the bottom vl.01 i can't use it it's tottaly black no hard reset works, HELP!
euh i really need uyrgent help i can't connect to theactive sync either, i just downloaded the new windows to my device clicked on something and then it went off and only black letters serial and v1.0. it's not my xda so HELP HELP HELP
don't panic...
you are in bootloader mode.
you've probably executed 'enterbl.exe', which is a part of every upgrade.
just connect your device with your pc and run normal upgrade/flash procedure.
buzz
but i can't use active sync anymyore, i unzipped the thing i downloaded and now it got 7 options to choose from but when i click it it opens a install program and in big red letters ROM IMAGE FILE NOT FOUND
it also says
the pocket pc software update cannot locate the ROM image file to update to your pocket pc. Download the correct rom update for your pocket pc and try again and i am a real noob in these thing
did you try a hard reset?
press the on/off button and the softreset button at the same time.
if that wont work
http://forum.xda-developers.com/viewtopic.php?t=18287
try putting that rom on your phone and dont forget to change the country id as described.
good luck friend!
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
bram said:
how can i change my country when i have a blanc screen on my pda? and what of the four should i download, i don't speak english so it's double hard to understand
Click to expand...
Click to collapse
if you understand my english thats ok.
i completly understand german but im not so good in speaking it.
normaly we can only speak english here but we can make an exeption so you can speak german to me and i will speak english back. OK? or try the translator (www.freetranslation.com)
did you perform the hardreset?
activesync won't work aslong as serial is replaced by the word usb when in the cradle it's ok carry on with the upgrade
try another pc to upgrade!
thats happen to me too.. but...
i also try to install the downloaded items from this website (which is the new windows version 2003 SE), and soon after i start installing it, my desktop computer says "error has occure during the installation process".
:shock: i was very shocked when i see my device completely blank with a word says "USB (on the top)" and "Ver. 1.03 (on the bottom)".. i really panic beacuse my active sync doesn't worked.. but then i start to hard reset my xda then reconnect my device and try to install it several times (bercause sometimes the error message still appear..) after waiting for 5 step of installation which takes abaout 2 hours
tadaaaaaaa now i have an XDA IIs application on my phone...
So in conclusion:
1. do't be panic :wink:
2. try to hard reset ur device
3. reconnect ur device (even if the activesync won't recognized ur device)
4. Install the downloaded files..
5. wait until ur computer says "deleting extended rom" (or something like that)
6. be patient..
7. Pray to GOD..
8. and here you go you got new look for ur beloved xda.
good luck..
oh it works!!!!
there are no words for it and the landscape and the themes, it's BEAUTIFULL!! thanks alot everyone!!!!!!
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
Similar but not same
Hi I have a similar problem.
While updating my Himalaya device to the XDA2jojo v3.2z5 (not the first time I have installed this version) it has gone completely blackscreen.
I have tried to soft, hard reboot the device. I have also tried to initiate a reinstall with connection error failure. I have tested the batttery and it is okay. No matter what I do I cannot get the device to come back to life.
If I plug the device into the cradle or attach power I get a red light where there is normally the green flashing or orange power light.
Anyone any ideas what this could be.
I have had a similar issue where I would get a blackscreen this problem has occured a few times but I have always managed to get the device back with hard reset.
pleeeeeaaase read/search the forum i know its fustrating when your phone apears to be dead but there are about 100000 topics about this problem and about 100000 times the solution!
greetings OMEGA_ReD
Hi all,
I've try to upgrade my 200i to WM6 and after that I get this problem.
First I try to find something looks like my problem, but most people can see the collored screen or bootloader.
I can get nothing on screen, only the light!
If I connect the device can read via Active Sync!
What to do!
I'll be gratefull for any halp!
Thank You
meshuggah said:
Hi all,
I've try to upgrade my 200i to WM6 and after that I get this problem.
First I try to find something looks like my problem, but most people can see the collored screen or bootloader.
I can get nothing on screen, only the light!
If I connect the device can read via Active Sync!
What to do!
I'll be gratefull for any halp!
Thank You
Click to expand...
Click to collapse
see my thread... in my signature
dioxda2 said:
see my thread... in my signature
Click to expand...
Click to collapse
Thank You VM for the quick answer, dioxda2!
Sorry but one more question. Because I still can't get the "three color screen" and want to feel not worry : Based only of these symptoms (I can PWR On/Off and read via Active Sync the device ) Am I kill it or not!?
.
BEst Regards
& Thanks
George
Hi dioxda2,
Just a quick thanks to your guide... My pc had crashed while i was flashing my Jamin at 95%
Thanks again!
meshuggah said:
Thank You VM for the quick answer, dioxda2!
Sorry but one more question. Because I still can't get the "three color screen" and want to feel not worry : Based only of these symptoms (I can PWR On/Off and read via Active Sync the device ) Am I kill it or not!?
.
BEst Regards
& Thanks
George
Click to expand...
Click to collapse
can't get the "three color screen" ????
read my post 1 to the link in my signature..............
dioxda2 said:
can't get the "three color screen" ????
read my post 1 to the link in my signature..............
Click to expand...
Click to collapse
Sorry to bother you again, dioxda2
but looks like i'm realy fool !!!
I memorize your post!!!!
I can light the screen using PWR and turn off holding it! ( blanc screen only the light) Do you mean I must use the "Tradition (OLD) method" , because I already done it without success! ( The flashing stops at ~70%).
.
I still trying!
Thanks!
meshuggah said:
Sorry to bother you again, dioxda2
but looks like i'm realy fool !!!
I memorize your post!!!!
I can light the screen using PWR and turn off holding it! ( blanc screen only the light) Do you mean I must use the "Tradition (OLD) method" , because I already done it without success! ( The flashing stops at ~70%).
.
I still trying!
Thanks!
Click to expand...
Click to collapse
1. you are NOT FOOL
2. better follow steps to the bootloader mode,
3. Plug to PC if you see the 'usb' @ left bottom of Prophet .... good.
4. Flash PVtemp and BE PATIENT ~~~~ IT TAKES SOME MINUTES ~~~~
5. when ready, after Prophet restarts, ONLY CONTINUE THE HARDSPL..... (no touch activesync....)
TRY
dioxda2 said:
1. you are NOT FOOL
2. better follow steps to the bootloader mode,
3. Plug to PC if you see the 'usb' @ left bottom of Prophet .... good.
4. Flash PVtemp and BE PATIENT ~~~~ IT TAKES SOME MINUTES ~~~~
5. when ready, after Prophet restarts, ONLY CONTINUE THE HARDSPL..... (no touch activesync....)
TRY
Click to expand...
Click to collapse
Thanks again!
But I think it must be HW problem!
Because I've flash successfully ( 100%) the prophet using ROMUpdateUtility_NT_G4 but still can't see something on the display!
even this "USB" at the bottom of the screen!
Could be display problem???
Sorry but how to be sure that the HW is O.K.??
I'll try to put the display in another Prophet to see what happens!
But if if works , than ...... ?????
If it's not working you can always try to remove your SIM card and hold Camera button and press ON button....
Now you can see "three colors" screen and USB then you have to flash with NVID(no vendor) AKU2.2 rom .
meshuggah;1902747 said:
Thanks again!
But I think it must be HW problem!
Because I've flash successfully ( 100%) the prophet using ROMUpdateUtility_NT_G4 but still can't see something on the display!
even this "USB" at the bottom of the screen!
Could be display problem???
Sorry but how to be sure that the HW is O.K.??
I'll try to put the display in another Prophet to see what happens!
But if if works , than ...... ?????
Click to expand...
Click to collapse
Hey~~~
1. if you can see your Prophet screen on your PC,
2. HW problem.... 20% of chance to win....
2.1 OPEN your prophet,
2.2 remove you screen, take care to the screen connector, that's a bit fragile, but
just make loose the pin, the screen may be detached very easily.
2.3 power on the Prophet, and put back the screen ( no power off), 20% you can get back the screen display properly.
4. power off,
5. make the Prophet back to one piece.
PS. hope it works for you.
dioxda2 said:
Hey~~~
1. if you can see your Prophet screen on your PC,
2. HW problem.... 20% of chance to win....
2.1 OPEN your prophet,
2.2 remove you screen, take care to the screen connector, that's a bit fragile, but
just make loose the pin, the screen may be detached very easily.
2.3 power on the Prophet, and put back the screen ( no power off), 20% you can get back the screen display properly.
4. power off,
5. make the Prophet back to one piece.
PS. hope it works for you.
Click to expand...
Click to collapse
Hi again,
1. I've removed the display veeeery easily (nothing happens with the pin )
2. Found other one prophet and put the display there and it works fine : the display is hale.
3. Follow your instruction I put very carefully the display back in the working prophet : nothing new ! The screen goes white and blanc :-(
4. Go outside and smoke a cigarete to drown my anger!
Is there any chance to find the problem!?
Thanks
Hello everyone
I flashed a rom on my Smartflip, after having unlocked the cid.
Everything worked well, but the first reboot has been fixed on the screen Win Mobile 6.1 and after a SR, not open more windows mobile screen. If I press the power button nothing happens, black screen. I put it in bootloader leaves the writing USB but the PC does not detect it, help please.
Sorry for my English, I'm Italian.
Francesco
check my post.... it's called gold card method, don't be afraid, i had the same problem many years ago and i could resolve it... good luck!!!
U have to boot in tri color mode and flash another rom. Search in the forum. (Is similar to "press the volume up button and the opposite button and power on the phone..) but i can't remember the exact sequence. Search in this forum good luck
Hi,
What is the most recent/best ROM that you use?
Thanks,
*
Hi there I’m even scared to write…
Newbie Noobie here. Greetings!
Got myself a birthday present a few days ago – HTC Desire.
If it helps, here are the details:
======
Firmware version: 2.2
i rooted my phone and then followed the steps to install custom rom
Anyway, here’s my problem (there were posts about it before as well).
Once I reach point 5 in Step 2 [i.e. Turn off your phone & turn it back on holding POWER + VOL DOWN then use vol up/down to scroll down to ‘Recovery‘ and power to select.] after I click ‘Recovery’ my screen either stays white with the green HTC logo or just goes black – in either case, that’s it… nothing happens and no buttons work.
The first time it happened I almost got a heart attack (well, which noobie didn’t?) because I thought I’d just bricked my baby… Right now it is still the only way for me to do ANYthing after getting the black screen…
Any suggestions/help will be more than welcome! Thanks in advance!!!
(And sorry for the long post… I always need long intros and all the details listed to make myself as clear as possible)
Please do help me
i am nearly crying while typing it
email me the response
cheers
Raj
rajverma3135 said:
*
Hi there I’m even scared to write…
Newbie Noobie here. Greetings!
Got myself a birthday present a few days ago – HTC Desire.
If it helps, here are the details:
======
Snip, snip
Raj
Click to expand...
Click to collapse
Have you tried this site?
My hd2 volume down button is totally stucked. As like I always hold dow, so just a little bit complicated method help me to not start the bootlogon screen or use the pda (I have to hold down the win button) And I cant tune up the wolume of course.
I used a windows phone seven op before this happend. After I put back the original rom because I thinked the phone7 is a problem. This rom can do this my machine? I totaly wipe the op.
Anybody ever has the same problem? There is any way to repair this vithout service? MY friend said this is a common problem. Is it true?
Thanks for any help.