since ipl spl are programs which let os start could we insert dual boot line since wm5 gives a good battery life ,i know this has been possible on my ipod mini 4gb to boot into apple os or linux , may be apple people are more deeper in their thinking ,or else could there be some way to may task bars or wm5 look round stylish like wm6 by replaceing some dll's
use wisbar ?
no i had to upgrade to wm6 touch VII (by gullum) there is no solution for dual boot i guess.
Related
Hi people,
I'm Luca from Italy, and I'm writing here hoping that You can help me to recover my dead PPC.
My PPC, when living, had Windows Mobile 5 like O.S.
So, As i've some problems with the phone I've decided to downgrade the radio version from 1.17 (people say that it is buggy) to 1.08.
So i run the HimaUpgradeUt_noID (I've also HimaUpgradeUt), but i've forgotten to delete the NK.nbf file from the directory.
I put the PPC in bootloader mode (SERIAL on top and ver. 1.06 on bottom) and then to the cradle directly to the motherboard USB connector
The sofware begin to update upgrading even ROM CE file, but when it arrived at 31% himaUpgrade stopped its work, showing that I need to reset (only normal reset and not soft reset) the PPC From this time until now my PPC show always and only the bootloader view.
When I try to upgrade again, the himalaya soft don't show what my PPC has like rom or radio version. It shows only the Ce rom and Radio that I'm going to ugrade.
It seems that software isn't able to erase ROM IMAGE
Active sync can't identify the device (some time it is indentified as unknown device).
When i start the software for ugrade the Active sync tray icon disappear.
I'm only able to ugrade radio stack or ExtRom.
PLEASE PLEASE PLEASE, HELP ME.
P.S. The device is unlocked
2 hits
http://www.expansys-kr.com/ft.aspx?k=21161
"Edited:- Problem solved, I loaded the upgrade from a different PC. I don't know why my main PC would not work as that is the one I regularly sinc the pocket PC to, but it just kept aborting the upgrade. Anyone else having this problem, try another PC."
if you're lucky
http://forum.xda-developers.com/sho...t=Failing+ROM+Update+Jam.+Error+112+CE+Failed
"it was stoping with an upgrade error at the very beggining of the extended ROM flashing no matter which ROM you were flashing to it! At the end they exchanged it for a new one, probably the ROM chip was faulty!"
if you're unlocky
Hi Rudegar,
first MANY MANY MANY THANKS for Your support.
I'm very unlucky.
I'm not able to upgrade my PPC.
The strange thing is that i can upgrade Radio Stack and even Extended Rom!
Only CE ROM wont' update.
Previous CE ROM installed was AKU 3.5 and Windows Mobile 5.0
Everythings worked fine.
Non other way?
I've seen that after launched del himaupgradeUt_noID the Activesync tray icon ho away.
My PPC sometimes ins't "seen" by my XP while other times it is "unknown device"
Why Can I only update RADIO and Extended Rom, while CE Rom not?
... P.S.
evey kind of button that I push the PPC is always in Bootloader Mode!
I'ev tryed: POWER + CAMERA + REC + STYLUS over the hole.
When I put the PPC to battery charger, red led is on until nothing is on the display, while when there is the written over the display, led is off.
No way to help me?
No news? I'm so sad
hello. i have the same problem but i have some suspections: i have 3 wersions of wm6 roms. one weight is 64 mb and others 32. and i tkink we are trying install rom from htc, dell or ipaq to our mda or other... so- **** this wrong rom and search for normal rom for himalaya ->
take this one :
"
mirror in china ,but very rapid downloading
http://exs.mail.qq.com/cgi-bin/downl...3f0dd183418032
enter the code e506cd02 then go
thx to c_shekhar
"
screenshots: wm6 pro. : http://www.engadget.com/photos/windows-mobile-6-professional/
cheers
i have updated my rom to Khoa-ha ROM PDAViet.net 6.5 but my touch screen now does not work.it was working ok earlier with 21014 sonblack 6.1. so went back to wm5.0 then again 6.5 then to sonblack 6.1 but my screen gets stuck at align screen everytime. i have reset my phone hard and soft many times but i am stuck for good.i love my atom very much and am very sad to see it crippled.
i searched and found the touch screen registry values but could anybody guide me as how to update them to phone.
thanks.
I got an iMate JASJAM from my father awhile back - a great hand-me-down if you ask me!
It's currently running Windows Mobile 5 w/ default just about everything.
HERM100
IPL-1.01
HERM100
SPL-1.11
Anyway, onto my problem.
I'm using the Hard SPL upgrade files found in Olipro's thread.
I run it and it works up until I select "Yes" on my device.
It then reboots into the bootloader and just sits there and does nothing until finally the installer throws an error 260.
Anyone else had this problem?
Is there a simple fix?
If it makes any difference, I've got a Mini-SD card in it. 512mb.
Go to the Hard SPL thread, page 116, post 1160. It tells you (and gives all apps needed) how to install using the SD card... Gets rid of those pesky sync problems.
You can use the sad card method to upgrade your os too, just drop the steps using sspl.exe....
Cheers...
wonderbreadz said:
I got an iMate JASJAM from my father awhile back - a great hand-me-down if you ask me!
It's currently running Windows Mobile 5 w/ default just about everything.
HERM100
IPL-1.01
HERM100
SPL-1.11
Anyway, onto my problem.
I'm using the Hard SPL upgrade files found in Olipro's thread.
I run it and it works up until I select "Yes" on my device.
It then reboots into the bootloader and just sits there and does nothing until finally the installer throws an error 260.
Anyone else had this problem?
Is there a simple fix?
If it makes any difference, I've got a Mini-SD card in it. 512mb.
Click to expand...
Click to collapse
i got your problem on my i-mate jasjam too,
have u solve the problem yet?
i face the same problem
Well I flashed maybe 30 HTC Tytn PDA`s (I work in service) and never bricked any... I never putted cooked roms,bcs this roms are stupid.And a lot of cooked roms use much more ram and many of them have simple appcliations,which you can to install alone... So,my advice for peoples : Use official Win Mobile 6 rom from HTC ftp server.You can find links in this forum also...And yeah I dont need HARD SPL for official... never bricked.
Depends slaki85 if the Hermes has been Branded... For example, I have the Telstra rom on my Jasjam, if I tried to put the HTC official rom onto it, I'd have a brick... The carrier rom prevents me putting any other rom on it other than theirs.... And it ALWAYS has a heap of bloatware.
You also can't put wm6.5 on...
Hard SPL allows me to put other roms, cooke or official, that I can't put on without ending up with a brick.
As for the guys who can't put Hard SPL on, use the sd card method as I said before. Its easier, means there's less chance of a brick and takes 2 secs...
ultramag69 said:
Depends slaki85 if the Hermes has been Branded... For example, I have the Telstra rom on my Jasjam, if I tried to put the HTC official rom onto it, I'd have a brick... The carrier rom prevents me putting any other rom on it other than theirs.... And it ALWAYS has a heap of bloatware.
You also can't put wm6.5 on...
Hard SPL allows me to put other roms, cooke or official, that I can't put on without ending up with a brick.
As for the guys who can't put Hard SPL on, use the sd card method as I said before. Its easier, means there's less chance of a brick and takes 2 secs...
Click to expand...
Click to collapse
Yeah,you are in right with 6.5 WinMo...I really tryed before Win 6.5,and expect few visual changes,he dont have anything new..With 6.5 or 6.5 + Manilla-TouchFLo,TyTN is very slow...what to say about ram memory...sometimes and 15 MB more busy...I understand that peoples always will put new rooms,I only dont understand why peoples risk...Expect if some win dont have some big changes.byw if someone want to put official HTC 6.0 rom,I tryed many times with 100% sucess in HTC TyTN and SPV M3100 (also TyTN but from postpaid Operators)..
I also agree that is HARD SPL good sometimes.I only dont understand why peoples change roms... : P especially custom roms...(few apps more and speed,ram slower...).But probablly I am subjective : )
Again, if you have a carrier rom they tend to overload it with bloatware, software and apps that use their sites. It tends to slow down the hermes and, truth be told, I've started with less than 15Mb ram using the stock rom... When you have that happen, cooked roms are a much better alternative. Also, if you use the apps cooked in it means you don't have to hunt down the cabs yourself....
Much easier....
Hello, this is my first post.
I have bought an SPV M3100 (HTC Tytn). It is my second WinMo phone with touchscreen (first was Eten x500). I've unlocked it (SIM and SuperCID). I've seen here some WM6.5 roms, but they ware moded. I want a CLEAN (original) version of WinMo 6.5 (to customize it myself how i like). I want the WWE version (Romania).
Also, I want to know if WinMo 6.5 have Mass Storage option for card, or i will need a 3rd party program (becouse i don't like ActiveSync) ?
...
Great comunity here
georgik ce faci tata...nu-ti raspunde lumea?
w3b3r said:
georgik ce faci tata...nu-ti raspunde lumea?
Click to expand...
Click to collapse
NU
ooo fratsilor!!!! romania? moldova?
help please
Hi all of you!
I have a Hermes (HTC Tytn/ Orange SPV M3100) and i succesfully tried a lot of ROM’s until these days..
But, this happened:
During upgrade of a ROM, i made the mistake to disconect the device from the PC..
And, now the problem is that i can’t boot ANY OTHER ROM!
I can enter to BootLoader , where i see
HERM100
I PL – 1.04
HERM100
SPL – 2.03
ALSO, i CAN connect to PC (it displays „usb” & i see it on Device manager)
(PC run Vista Ultimate 64 bit).
But, when i try to upgrade ANY ROM , the process starts, BUT STOPS at 0% ? .
I searched & read 4 days for a SOLUTION to make my phone alive again..
Can anyone tell me what to do?
Is a REAL solution for this issue?
Please reply.
Thanks!
I've had many WM phones in recent years. The HD2 is good in every respect except it still runs WM6.5. Its time to look at Andriod where (alegedly) everything works as it should.
Problem is I am a tech numpty compared to most on here.
So I'm after some advice:
I need a reliable phone, with sat nav, which can manage my diary, pick up push mail from my work MS Exchange account, and take photos etc. WM 6.5 with CoPilot does all of these things unreliably.
So I want to laod an Android ROM and Google Nav Beta
So far I've downloaded HSPL3 and loaded it successfully onto my phone, I have a Sprite Backup of the WM6.5 instance running today, and I have a standard Voda Leo WM 6.5 ROM.
So booting my device since loading HSPL3 makes no difference, and if I press and hold the vol down button to get to the bootstrapper I get the stripy screen whihc niow shows SPL-2.08.HSPL 8G XE
What I do not undertsand is how I point this to the ROM I want to load - can someone give me some simple acroymn free instructions on this?
I presume the ROM's need to be on my storage card. Can they go in any directory or must they be in the root?
I have not yet downloaded an Android ROM and I would like to gety one which is more corporate themed than scifi if you know what I mean... I've been running CoOkies home tab which makes usability better as its a bit more Iphone like as an indication of what I like. Any Recommendations please??
Android does not require bootloaded (stripes screen) , it boots from windows mobile itself , meanwhile Android cannot be booted from the Nand ( phone internal memory) , you have to copy the " Android " folder to your sd card and run clrcad.exe then haret.exe from within Windows Mobile file explorer. hope that is what you mean, if not reply back
And for the Android build, there is a thread which lists you the most fancy and stable builds so u can choose from hope this helped
Some people can't boot Android from 16 GB cards. Just in case you have one.
OK, Thanks for your replies.
One final question before I bite the bullet - I'm really nervous about "Bricking" my HD2. If I load Android and hate it, how do I reload the original WM6.5 ROM?
fatarnie said:
OK, Thanks for your replies.
One final question before I bite the bullet - I'm really nervous about "Bricking" my HD2. If I load Android and hate it, how do I reload the original WM6.5 ROM?
Click to expand...
Click to collapse
By installing/using Android you don't remove/over wright Windows Mobile.
Android runs from your SD card not internal memory
This means concretely you don't need to worry you.
PS, I don't know if it is mention before but you need minimum radio version 2.08 but preferable is using radio 2.12.50 ore even the latest one 2.15.50 !
fatarnie said:
OK, Thanks for your replies.
One final question before I bite the bullet - I'm really nervous about "Bricking" my HD2. If I load Android and hate it, how do I reload the original WM6.5 ROM?
Click to expand...
Click to collapse
and to add to what kurt said, to get back from android simply turn your phone off and on (assuming you don't have a dual boot program that will push you into android) and you will be back to windows mobile. tis easy.
Hmm, So I need to keep the 1.5Gb Android folder on my SD card permanently??
I havenot been able to get it to boot anyway.
If I run the haret.exe, I get a botting from Linux progress bar then a blank screen with an inital few lines of very small text which fade after about 15 secs, the screen goes blank and nothing happens. What can I be doing wrong??
Ive tried with haret.exe and all the files from the Android forlder are in the root of the SD card and with teh Android folder in the root. Neither works.
Help!
Hi I had the same problem; after updating my HD2 with the new official ROM I got the new radio (with .50) and now I have Darkstone 3.2 Froyo running on my HD2 My HD2 thinks he is a Desire HD now hehehe; I'm writing you this running Android.
Sent from my HTC Desire using XDA App
after updating my HD2 with the new official ROM I got the new radio (with .50) and now I have Darkstone 3.2 Froyo running on my HD2 "
Sorry Murat you may as well have written that in Dutch for all I understood.
Bottom line is I cannot get Android to boot. I see the Linux bootstrapper text then just a blank screen.
Also are all Andoriod roms IRO 1.5Gb???
Any ideas?
Also is there a simple way to make the phone boot natively into Android - i.e. no need for WM at all?
you need to wait at least 20 mins for the first boot, screen might be blank but its creating your data.img file.. .
start fresh and give it time....
and no, you need winmo......
Want to load Android but
I have been doing some research on loading my HTC HD2 with Andriod. The information I have found says my SPL should be:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
My SPL is 3.03.0000 XE.
I note the documentation on the software I down loaded was Jun 10, so was kinda wondering if it is out of date. Could someone point me to some later version software?
Thanks
JOhn
fatarnie said:
Also is there a simple way to make the phone boot natively into Android - i.e. no need for WM at all?
Click to expand...
Click to collapse
they've made an android program that can run directly from your nand and you wont have the wm 6.5 os anymore
Johnc_uk said:
I have been doing some research on loading my HTC HD2 with Andriod. The information I have found says my SPL should be:
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
My SPL is 3.03.0000 XE.
I note the documentation on the software I down loaded was Jun 10, so was kinda wondering if it is out of date. Could someone point me to some later version software?
Thanks
JOhn
Click to expand...
Click to collapse
To have android you must have SPL 2.08 HSPL.
For SD Android, you need to boot into winmo.
To have NAND Android, you need MAGLDR 1.11 above (latest is v.1.13)
You have firstly to downgrade your SPL.
Try this Link: http://forum.xda-developers.com/showthread.php?t=609477
Goodluck