since ipl spl are programs which let os start could we insert dual boot line since wm5 gives a good battery life ,i know this has been possible on my ipod mini 4gb to boot into apple os or linux , may be apple people are more deeper in their thinking ,or else could there be some way to may task bars or wm5 look round stylish like wm6 by replaceing some dll's
use wisbar ?
no i had to upgrade to wm6 touch VII (by gullum) there is no solution for dual boot i guess.
hi there, i have received a tytn from germany, it had wm5 in germany,i did sim and cid unlocker and flashed it with hardspl7 to put shaps portuguese rom.
the thing is, every time i put a wm6 rom the tytn freezes at htc splash screen.
to unbrick it, i have to put an wm5 rom with 1.04 spl and it freezes again at splash screen, this time saying "No GSM", have to flash a radio rom and it backs to normal.
i dont know what i can do to tytn loads a wm6 rom...
It is impossible to flash wm6 in this tytn??
thank you all
i'd say... it's definately wrecked... i got a german-tytn myself and it's working fine under wm6
sure u're not using a pre-branded device?
no, its a htc tytn - hermes 200... its working 100% with wm5.
but with wm6 it doesnt pass the splash screen...
its not the first time i upgrade a tytn, but this is happening for the first time, its really strange.... i dont what i can do more..... any help?
thank you
Any help please??
Thanks
Hi,
In Every ROM with WM6 and WM6.1 I got this trouble.
My QTEK S200 works fine with MW5 , when I install a WM6 ROM the sound dissapear.
First my QTEK S200 (HTC Prophet)
IPL: 2.20.0001
SPL: 2.20.0001
Radio: 2.47.21
OS: 2.20.7.35 WWE Korand 3.1 WM6.1
Protocol: 4.1.13.24
2 GB SD
Software Installed:
Coreplayer 1.1.0
SPB Weather 1.0
Oxios Memory 1.40
Battery Status 1.04.203 beta4
Windows Live for Mobile 10.6.0033.0600
How this happen...
1.- The Sound dont work, The Speaker.
2.- I can recibe call and call. But incomming call theres no sound only Vibration.
3.- When this happend I try to Open CorePlayer or any software for media and give a error " Wave Output: Devide Error !"
4.- Reset , the sound come back but...
5.- After this the ENDCALL Button works bad, after pressing this sound like a chime.
I got to rollback to WM5 and the trouble never come again.
I try a lot of things Reset, Flash , Reflash , Another ROM , bla bla...
And I confirm this only happen with WM6 and now WM6.1
I Think this is a software trouble , no hardware because when I turn the Volume down the weird Chime Sound go down too.
Please Gullum , HMA4 , Korand, Cloudyfa ... help me ... I dont know what to do ...
Seems only you have this problem, try to read step by step guide to upgrade again then flash to Korand 2.6 WWE, if the problem still happen, it must be your hardware problem.
IN your signature :
IPL: 2.20.0001
SPL: 2.20.0001
Radio: 2.47.21
OS: 2.20.7.35 WWE Korand 3.1 WM6.1
Protocol: 4.1.13.24
How can Korand 3.1 using SPL 2.20.0001 ??? when using korand 3.1 the SPL should be 2.g3.4pda.
To me it seems to be a software conflict. Try to keep your ROM clean after a reflash for some time. If you have this problem without any additional software installed, then the problem is with your Prophet (as you being the only one reporting) but I can't imaging because things work fine with WM5.
So give it a try and don't install anything exept your ROM.
@tb:
He probably used JumpSPL to flash, that utill don't change the SPL but bypasses it only once.
Looks like a radio Problem. change your radio, I think it will help just give it a shot ..
thanks guys
thanks for your comments ... since yesterdar I do a HardReset and work with the rom clean ...
Everything goes ok ... But lets see...
If the problem appears again I will notice you..
Thanks again..
PS HMA4 when you gonna bring to life a new Crystal ?
gzprophet said:
thanks for your comments ... since yesterdar I do a HardReset and work with the rom clean ...
Everything goes ok ... But lets see...
If the problem appears again I will notice you..
Thanks again..
PS HMA4 when you gonna bring to life a new Crystal ?
Click to expand...
Click to collapse
Hi, I can the same problem. I have korand 6.1 WW3. This problem is the same with Shadow (all version), Korand, etc. Do you find the problem? Im sorry for my poor english.
I have the same problem. It's not a big deal - happend only once or twice and after softreset the problem is no more. Using Konrad's 2.5.
Another problem that's more of a pain in the ass is that my prophet hangs once in a while. At times, when I press the power button to get it to standby mode it just won't turn back on - I have to soft reset it.
Problems such as not always working are something you must accept is going to happen when you put software on a device that it is not designed for. People like gullum and Cloudyfa try to remove as many problems as possible, but they will happen. Nothing can be done to prevent all problems, but the experts can sort most of them.
l3v5y said:
Problems such as not always working are something you must accept is going to happen when you put software on a device that it is not designed for. People like gullum and Cloudyfa try to remove as many problems as possible, but they will happen. Nothing can be done to prevent all problems, but the experts can sort most of them.
Click to expand...
Click to collapse
Yup, and we are pretty much aware of it But the guy was just pointing out the problem, so saying what you have said is quite pointless. Let's just try to work out the problems we can work out and try to "live" with the rest.
My comment was more about this:
Another problem that's more of a pain in the ass is that my prophet hangs once in a while.
Click to expand...
Click to collapse
me and my brother changed to WM6 and we both get the same problem that the sound goes off after some while and then i have to soft reset and then the sound comes back ,, this is a serious problem please try to find a solution
thank you
What ROM did you upgrade to?
Again ...
Hi , me again ...
I do a hard reset , work some days with a clean rom and the problem appears again ...
Clean ROM = No Sync, No Soft , No Apps , no Nothing !!!
A lots of tests ... So I Confirm that this problem is the ROM maybe the OS , some driver etc. WM 6 or WM 6.1.
I try to work some days without a SIM and the problem never come ... Maybe this can use as a clue for a solution.
I dont know what more I can do...
If HMA4 , Korand, Gullum or Cloudyfa need me as a tester for a solution to this problem I do it ..
Hi guys, I am experiecing the same problem.
Mine is a Dopod 818pro with SPL 2.20 and Radio ROM 2.69
Please advise your ROM versions to see if any clues.
Please Help !
Gullum, Cloudyfa, Korand, Hma4 and others developers ... please help us
I know of this problem with some builds and the workaround is to goto phone > menu > options and set kaypad of so no sound comes when pressing the numbers of the dial pad. some builds have the problem of disaparing sound after pressing in about 30 - 40 numbers on the phonepad.
Thanks Gollum
Thanks Friend...
So , you tell me if I turn Off the keypad tones the problem dont come back ?
But what about the Chime Sound when the Endcall button is preset ?
In my phone i Got the weird sound of the endcall button after the problem of the sound goes away ... a Soft Reset and the weird sound come ..
If you want in some solution for this I wanna help you as a tester..
Thanks again gollum
It sounds I was caught by the same problem, at least by looking. I got no sound from my phone speaker now. This happened after I try to play music through the Nokia BH801 BT headset. I installed a bunch of program but none works, and i lost sound after I installed BT 3900. Don't know if that's the reason, but I couldn't access bluetooth manager through BT 3900 indicating " insufficient memory". Plus, I got two BT icons in "connection" page now
I would like to remove BT 3900, but wasn't able to locate the file. I read the Enable_MS_BT.cab could do the job, but just can't find the file.
Please give me some clues to solve this frustrating problem. Thx a lot
...
I think that your problem is other ...
But why you dont try a Hard Reset, if the problem is Logical or Soft Driver , a Hard Reset maybe can be the solution ...
Try this ... and see if your Speaker come to life again.
so what is the solution ,,, now more than 10 people have the same problem but no solution????????????????? (((((
O2 Atom LIFE....
After the package file release (AL1_CB_0425_WWE_B1_DSUU.exe), he was copy all of file to MiniSD and reset Atom Life to bootloader mode and it was upgrade. So, upgrade to 99% it was notice error. He softs reset it after wait for minute. it can not power on and black screen.
My Atom is Blinking RED... & BLANK SCREEN.... ((((((((((((
I'm copy IPL.nb0 and EBOOT.nb0 to minisd card... & ... (((((((
PLZ HELP ME!
try to flash back the shipped rom from O2.
My atom Life is dead too
I just have got it yesterday andthen i flashed it today with the WM 6.1 rom from Medkid and then was working, then i wanted to get back to the original rom then i downloaded one from the wmg homepage and was not working, then i extracted the files and put on my minisd and it has flashed but then it was not working anymore... is just black screen... nothing works.. tried removing the baterry, reseting, hard reseting,.. no lights on.. just when i plug it to charge i see the charging light on.. Can someone please help me too.. pleaseeeee
thanks
My Atom
Last night i had update to WM 6.1 kumara final, but after stage bootloading on stage external room my atom is dead, Please help me
unplug MiniSD then Try to do hard reset...
you can rescue your devices (atom/Atom exec / Atom life/ HP 68xx/ O2 Flame) by JTAG
http://wiki.xda-developers.com/index.php?pagename=DeadBoot
rizalnasa said:
Last night i had update to WM 6.1 kumara final, but after stage bootloading on stage external room my atom is dead, Please help me
Click to expand...
Click to collapse
Can you still get the bootloader?
If you can boot it up to the boot loader. you can plug into your computer and flash another rom. I had the same problem a week ago. now my atom is working again with Homers WM6 rom
I have a problem when Upgrade WM 5 to WM 6.1
when i upgrade my atom pure from WM 5 to WM 6.1 is success, and than i downgrade from WM 6.1 to WM 6.0. after flashing the device reboot and than the atom only vibrate and blank on the screen.
I try to hard reset it's still vibrate only and cannot load bootloader screen...
so somebody please help me....
ps : sorry my english it's not good, i hope all of you understand what i mind...
thanks
If you still haven't solved you problem:
you can simply pull out the battery while pressing and holding down the camera button AND reinserting it while still holding the camera button down.
then once you release the camera button.
it should boot
This worked for me and my atom loaded to the bootloader and i was able to successfully flash it