Im sorry guys i have searched around and use different ways but dont know what to do.
Ok firstly tried to give NBD v8.3 a try using the shell flash rom program. Everything was ok until i hard reset and its now stuck on the splash screen. It was on WM6Titanium_Version2 with no problems, i just wanted to try something else out. It is a G4 cid unlocked that is running on ipl 2.21.001 spl 2.21.001. I can get into the bootloader screen but stuck what to do there.
I tried installing wizard love rom again but nothing, i tried splash screen unfreezing but nothing. i tried using tmobile original rom but nothing. Am i doing this wrong. Please help im just frustrated i own a hermes and upgrading its rom is far more easy compared to the wizard.
Thanks for any advice.
If have searched for it ( or even just flipped through the reccent postings in the sub-forums) you would have found:
http://forum.xda-developers.com/showthread.php?t=276963
sorted out now i re-installed wizard love rom. Forgot to take the sd card out. Wizard back to life again Phewwwww
Related
The problem I'm having is pretty severe!!!
My HTC 8525 was working fine until I tried unlocking it via Hermes unlocking tool,
It started off well, booted to the progress screen, but did not move...
When i tried resetting it, it went back to the 4 color screen, red blue green, white...
At this point I tried a hard reset, which did nothing but go back to the same screen.
I then went to htc'a website to see if I upgraded my rom to WM2006 to see if I can get back into my phone, but it goes to %12 in progress, then just freezes up...
When looking at image version its being upgraded too, it shows blank, as the upgraded image shows something, whatever it may be...
I have tried other upgraded roms, as well, but to no avail...
I know their is something that can get done, due to the fact that i can get to my boot screen!
Some help would be appreciated!
THANKS!!!!
What version of SPL are you using on your device?
Try SPL V7
http://forum.xda-developers.com/showthread.php?t=296722
When I tried doing that my phone doesnt even detect anything..
Is their a way that could go ahead and just install the orirginal rom that came with it and the radio...
Isnt just like installing a new OS like Win XP Or vista?
I had a similar issue. Just flash back to an original ROM and you should be fine. It worked for me.
I know their may be a thread about this already, but I honestly have no idea how to flash back my rom!
The problem is with most of these rom upgrades etc is that you need to use activesync, but that would not be possible to do in my situation....
Please some simple basic instructions would be great!!!
Thanks
http://wiki.xda-developers.com/index.php?pagename=Hermes_SDCardFlashing
ruff_ryder_v12 said:
I had a similar issue. Just flash back to an original ROM and you should be fine. It worked for me.
Click to expand...
Click to collapse
Um? How? I didn't think I could 'go back' ??
see this thread:
http://forum.xda-developers.com/showthread.php?t=356231
I upgraded my I-Mate Jamin yesterday to Profit Shadow 1.0 after following the upgrade guides, doing a Hard SPL, etc. All worked very well. Then I noticed that the volume wasn't as high as I liked, so this morning I flashed it again to Crystal 5.0 (not 5.1) and the volume was no better. Then I looked around and found an older version (dumb me I didn't realize it was a WM5 version) by LVSW (RUU_Prophet_220734_2207114_024721_NVID ). This ROM had an extended ROM apparently. All installed OK, then I realized it was a WM5 program (volume still lower than I was looking for), so I decided to flash back to Profit Shadow 1.0 (no errors during the flash, but at the end when I got the HTC screen it went into Bootloader!). That's brings me to my PROBLEM! NO MATTER WHAT I TRY TO FLASH BACK TO, I JUST END UP IN THE BOOT MODE. I can flash LVSW ROM and it works, but NOT for any other ROM!! I have tried everything, read the forums for 6 or 7 hours and I tried everything suggested, but I'm unable to find a solution so I can Flash Back To Profit Shadow 1.0 OR Crystal 5.0. This seems like such a NOOB problem, that's why I searched for hours for a solution (hate to ask for help until I try to help myself first[/I])! I've flashed other HTC phones without problems… just never seen a ROM ( LVSW's RUU_Prophet_220734_2207114_024721_NVID ) that just refuses to be flashed over!!!
You guys are always great and helpful. If someone could help me out of this mess, I would really appreciate it!!!
Try..
-If you installed ShadoW etc. rom, your SPL is 2.G4.4PDA..
-If you back to WM5, your SPL is 2.20.0001..
-If you want to install again ShadoW, first install HardSPL for increase your SPL to 2.G4.4PDA again, after you can install ShadoW
I did all that you suggested before I made a post for help... even tried it again, all except using the G4 method HardSPL (as my Jamin is a G3 - that's what I did the HardSPL for). Nothing I've read so far works... yes I've been all over the upgrade guides, etc. My hair is already gray, but it's going white fast!
Here's the information off the bootloader screen:
SPL 2.20.0000
IPL 1.0
GSM 02.47.21
OS 2.20.7.34
The ( LVSW's RUU_Prophet_220734_2207114_024721_NVID ) just refuses to be flashed over!!! I'm not kidding! Try to flash ANY other ROM and it reverts to the boot loader screen, BUT I can flash LVSW's ROM above without errors!
There are a LOT of brilliant people out there... Does ANYBODY have a FIX for this? I'm tired, blurry eyed, pissed off, frustrated and feeling awfully stupid at the moment! HELP!!!!!!! PLEASE!!!!!!!!!!
How about this?
dnitram said:
I did all that you suggested before I made a post for help... even tried it again, all except using the G4 method HardSPL (as my Jamin is a G3 - that's what I did the HardSPL for). Nothing I've read so far works... yes I've been all over the upgrade guides, etc. My hair is already gray, but it's going white fast!
Here's the information off the bootloader screen:
SPL 2.20.0000
IPL 1.0
GSM 02.47.21
OS 2.20.7.34
The ( LVSW's RUU_Prophet_220734_2207114_024721_NVID ) just refuses to be flashed over!!! I'm not kidding! Try to flash ANY other ROM and it reverts to the boot loader screen, BUT I can flash LVSW's ROM above without errors!
There are a LOT of brilliant people out there... Does ANYBODY have a FIX for this? I'm tired, blurry eyed, pissed off, frustrated and feeling awfully stupid at the moment! HELP!!!!!!! PLEASE!!!!!!!!!!
Click to expand...
Click to collapse
you really did gone through this????
http://forum.xda-developers.com/showthread.php?t=353547
dnitram said:
I upgraded my I-Mate Jamin yesterday to Profit Shadow 1.0 after following the upgrade guides, doing a Hard SPL, etc. All worked very well. Then I noticed that the volume wasn't as high as I liked, so this morning I flashed it again to Crystal 5.0 (not 5.1) and the volume was no better. Then I looked around and found an older version (dumb me I didn't realize it was a WM5 version) by LVSW (RUU_Prophet_220734_2207114_024721_NVID ). This ROM had an extended ROM apparently. All installed OK, then I realized it was a WM5 program (volume still lower than I was looking for), so I decided to flash back to Profit Shadow 1.0 (no errors during the flash, but at the end when I got the HTC screen it went into Bootloader!). That's brings me to my PROBLEM! NO MATTER WHAT I TRY TO FLASH BACK TO, I JUST END UP IN THE BOOT MODE. I can flash LVSW ROM and it works, but NOT for any other ROM!! I have tried everything, read the forums for 6 or 7 hours and I tried everything suggested, but I'm unable to find a solution so I can Flash Back To Profit Shadow 1.0 OR Crystal 5.0. This seems like such a NOOB problem, that's why I searched for hours for a solution (hate to ask for help until I try to help myself first[/I])! I've flashed other HTC phones without problems… just never seen a ROM ( LVSW's RUU_Prophet_220734_2207114_024721_NVID ) that just refuses to be flashed over!!!
You guys are always great and helpful. If someone could help me out of this mess, I would really appreciate it!!!
Click to expand...
Click to collapse
THANK YOU SO MUCH dioxda2!!!!!!!!!! I've got my Jamin back on WM6!!! You don't know how much I appreciate it!!! There should be a STICKY on the link you gave me!! http://forum.xda-developers.com/showthread.php?t=353547
I had tried the TRADITIONAL Method last night, but it didn't work for me, but this DID work!!! IT SHOULD BE A STICKY STICKY STICKY!!!
you've better.... ( FOR NEW METHOD)
1. After flashing hardSPL for g3 ( step 1) all went ok.
then BEFORE flashing/upgrading your Prophet to WM6,
please copy the 3 files from the jumpspl.zip to the root directory of
your G3 Prophet ( JUST NEXT TO THE " \WINDOWS" FOLDER,
(attachached, pease unzip and copy then paste)
2. UNPLUG YOUR DEVICE from PC,
3. Execute the SPL shortcut IN THE DEVICE, then you see a all bright or white screen,
Then plug back the USB port ( connect to computer) the device, THEN use the Rom Upgrade Utility (RUU) to the rom you like ( all activities can only be seen in the PC screen, nothing will be shown on the prophet....
4. Finally, after 100% ( at 85% may take to wait a bit longer, just be
patient, as it may look like hang for about 2 minutes) just wait, all will went
ok AND OF COURSE, after it auto-restart, ALL will be OKOKOK !!!
( better hard-reset for once more )
You're FANTASTIC and I appreciate YOUR HELP!!! See, you can teach old dogs new tricks!! LOL!!! This is such a GREAT FORUM!! Thanks to everyone that took a look at my posting (or rather my dilemma) and considered a solution! Again MANY THANKS!!!!!!!!!
I posted this in the Titan forum by mistake. Sorry for the duplication
I need some help...I'm freaking out...
I cooked a ROM with dcd's version 1.6.9 for BELL a few days ago and it was wonderful and worked great.
Today, I tried to upgrade to version 1.6.10 and I f___ed something up.
It starts the htc boot up screen as usual, then the Bell screen comes up as usual, then a Sprint screen comes up briefly and then the Windows Mobile screen comes on and HANGS........
I have tried cold reboots, and nothing. I cant connect to it with USB.
I can kick myself for making an error because I was rushing......
Can anyone please help............................
Edit/Delete Message
koilmaker said:
I posted this in the Titan forum by mistake. Sorry for the duplication
I need some help...I'm freaking out...
I cooked a ROM with dcd's version 1.6.9 for BELL a few days ago and it was wonderful and worked great.
Today, I tried to upgrade to version 1.6.10 and I f___ed something up.
It starts the htc boot up screen as usual, then the Bell screen comes up as usual, then a Sprint screen comes up briefly and then the Windows Mobile screen comes on and HANGS........
I have tried cold reboots, and nothing. I cant connect to it with USB.
I can kick myself for making an error because I was rushing......
Can anyone please help............................
Edit/Delete Message
Click to expand...
Click to collapse
Try the hard reset.
If that doesn't work then try the bootloader mode and reflash it.
Hard reset
Hard reset did not help, it hangs on windows mobile screen.
Can u give me a bit more detail on how to get into the bootloader mode?
I figured it out. You have to but it into bootloader mode by pressing the POWER and CAMERA buttons at the same time and then reboot.
Then load ROM as usual'
Thankyou
You are the fing master. OMG mine was in the EXACT situation and i was freaking out. its currently reloading the ROM back on. Thank you soooooo much.
it probably happenned because modules overlapped, run g'reloc before building to avoid this.
I installed the hard=spl-mgf than i installed dcd 2.2, i read that I should install the radio afterwards. when the dcd2.2 rom finished installing the device when to the htc smart mobility screen and has been stuck there ever since. Dont know what to do! can anyone please help!!
Put your phone into bootloader mode (Hold Power Button + Camera Button + push in Reset hole with stylus) and try to flash new radio version. That should get you past the boot screen after the radio flash.
thanks! Now installing the new radio? You guys are awesome!
Glad I could help
so i tried this and the phone still sits at 0%. i dont know what to do
EDIT:i have been trying to find the original VZW ROM but i cant find it anywhere
EDIT 2:i found the vzw rom, and i am about to test it..
damnit to hell. no luck
The screen says
TITA100
SPL-1.06.0000
CPLD-9
it seems you did not unlock your phone, load the unlocker and then flash the rom
i tried Titan Unlocker and that sat at 0% too
have u guys made sure u have the 2.4 oli-pro bootloader???
if So...then flash the new rom...then put the phone in bootloader mode and flash the new radio...do a hard reset and it should work fine...thats exactly what i did. mine was stuck on htc screen as well...but now it works.
if that doesnt work, you might have to go to stock rom...download from htc website...then do the whole procedure again...Bootloader...Rom...Radio...Hard Reset
My phone's boot loader says SPL 1.42.0000XE. I have not upgraded to any custom rom since I bought the phone in Feb this year.
I decided to do a hard reset since the screen was frozen and soft reset did no good.
Hard reset was successful, but after that it landed on white screen and would not proceed.
I read some articles and downloaded a stock rom RUU_signed_0409.nbh from one of the links. I even copied it to the 8gb sd card that came with my phone. It does say that it is formatted as FAT 32. I renamed the file as leoimg.nbh, reset the phone and pressed the vol down key.
Now it shows the boot loader screen, then says "loading..." forever.
Please help! - By the way, I could never find a WWE version of 1.42.0000 SPL link to download.
i've got the same prob right now.
~ updated my phone with HSPL3 < all went well and finished OK
Phone is rebooting and working
~ now I want to try a different ROM and while installing it via
Active Sync it's giving an USB Error or this LOADING...
When trying to put the new ROM onto the SD Card with leoimg.nbh
it starts with LOADING...
....
I can reboot via removing battery and after that the phone boots up normal.
It's also working. But i can't do any flashes anymore.
*ADD! Error MSG
My PHONE DETAILS:
OS: 5.2.23134 (23134.5.3.9)
Manila: 2.4.20161332.0
ROM: ChuckyROM WWE 30/08/2010
Radio: 2.07.50.27_2
Protocol: 15.33.50.07u
HSPL before error: L2_RUN
HSPL during error: L3_PKG
no ideas?
I have the same problem... I just wanna update with the stock rom (latest). (no customs) . When trying via the pc, i get connection error. when i try via SD i stays on Loading. is there a solution for this ? thanks in advance
thejippen said:
I have the same problem... I just wanna update with the stock rom (latest). (no customs) . When trying via the pc, i get connection error. when i try via SD i stays on Loading. is there a solution for this ? thanks in advance
Click to expand...
Click to collapse
Yes; using the right stock ROM (the one from your aria)
or using GoldCard technique.
Put the HD2 into bootloader and then connect via usb. Run the flash file. This will only work if you are using a rom that your carrier supports as you have said you don't have HSPL...
have you solved the problem?
I cant solve this problem either, i´ve been looking for information on the internet the whole day.
Yesterday, i tried to flash my htc hd2 following a tutorial, and I used HSPL3(although I dont know if it really work, because my htc still says 2.08.0000 without the hspl, can somebody clarify this for me, please?), and after that I tried MTTY(Here starts my problem) just as the tutorial says, and then my htc restart, so I tried to flash it via the MicroSD card, but it stays stuck on a white screen which says "loading...", after that I tried to turn it up without the bootloader, but it stayed stuck on the logo screen.
Could somebody please help me???
I would really appreciate it.
denni2727 said:
I cant solve this problem either, i´ve been looking for information on the internet the whole day.
Yesterday, i tried to flash my htc hd2 following a tutorial, and I used HSPL3(although I dont know if it really work, because my htc still says 2.08.0000 without the hspl, can somebody clarify this for me, please?), and after that I tried MTTY(Here starts my problem) just as the tutorial says, and then my htc restart, so I tried to flash it via the MicroSD card, but it stays stuck on a white screen which says "loading...", after that I tried to turn it up without the bootloader, but it stayed stuck on the logo screen.
Could somebody please help me???
I would really appreciate it.
Click to expand...
Click to collapse
Two things I have learn;
If you install stock ROM over SD it will remove your HSPL.
And if you see 2.08.0000 spl on your bootscreen than the installation of HSPL was unsuccessful.
OMG...!
Thanks for the reply...
Soo what do you think i can do?
denni2727 said:
OMG...!
Thanks for the reply...
Soo what do you think i can do?
Click to expand...
Click to collapse
Hi,
Did you manage to fix the issue? Is your phone a branded one? The best way to go about is to find the stock ROM for your device and then flash it using the SD card method. This will update your ROM and SLP to stock. From there, you should be able to install HSPL and any custom ROMs.
Tazeem