Hi brothers, i have downloaded the Atom WM6 from the link. there is only one *.NBO file in it. i do not know how to flash it. which rom i can use to replace and flash? Atom Life Wm6? or...............
thanks brothers!
Here you go.. Watchout Aku 3.3.3 post for more details.. Remember this is for ATOM Only
UPGRADE PROCEDURE:
Your device battery must be at least 80% charged.
Enter into boot loader mode: POWER+DPAD(center)+RESET (simultaneous)
Connect device to PC using USB
Run the original ROM update Xda-Atom-ENG-20060426-MOT0822.exe
On the Welcome window, click <next>
Unzip attached nb0 file into C:\Windows\Temp Folder (overwrite existing file)
Proceed upgrading and follow on screen instructions.
Who can teach me how to port this Rom into T.Chinese?
p.s:I have got the t.chinese atom life Wm6 from Seeo2.com
that means we still use WM5 rom, replace the .NBO file, then flash it ?
thank!
liudileo said:
that means we still use WM5 rom, replace the .NBO file, then flash it ?
thank!
Click to expand...
Click to collapse
YES!
ok, got it, thanks brother
Related
ok guys......i am sure there is a post some where bout this....but i did search alot before postin a new thread here.....basically the problem i have is just obvious ERROR 101 : CONNECTION ERROR, ive got a XDA II with wm2003se by mysteryman......as i am selling this XDA II in a day or two i wanted to downgrade to the official rom thats been released by o2 thats 1.7 something so i started the downgrade process....but i didnt notice and realize.....that i was not suppose to take out the adaptor's cable from the cradle......as i did that the process failed and now after tryin many times to downgrade after resetting hard resetting.....i have only been unsuccessful.....
just to let you guys know after alllll this i tried hard reset no use......screen is stuck at bootloader, where the bootloader is sayin version 1.72.00WWE (thats the official rom release)......
same result after a soft reset toooo
NEEEEEED HELP ASAP......URGENT !!
regards
jeetz
mate,
did you try reinstalling the upgrade / downgrade after the reset?
cheers
I am sure the "launch rom" was posted by O2 for this purpose, I cant remember the link for it but O2 hosts it. It was posted to give a recovery solution when an upgrade go's awry.
Robson said:
mate,
did you try reinstalling the upgrade / downgrade after the reset?
cheers
Click to expand...
Click to collapse
yeppp
tried reinstalllllin the upgrade thats wm2003se also tried the official released v1.7 but no luck....tried both.....soft and hard resets.....
any other suggestions...?
cruisin-thru said:
I am sure the "launch rom" was posted by O2 for this purpose, I cant remember the link for it but O2 hosts it. It was posted to give a recovery solution when an upgrade go's awry.
Click to expand...
Click to collapse
can you plz try to get the link for me
or is this the link you are talkin bout http://www.my-xda.com/xda2_soft3.html
http://www.my-xda.com/xda2_soft3rom.html
http://music.o2.co.uk/xrange/download.asp?f=Xda_II_172181_Final.exe
if these are the links then ive tried the final release of an official rom from here and its givin same error 101......and cant find any page or link where it says if the upgrade process goes wacko follow these links.....
regards
jeetz
O2
Ensure that your battery has juice. Remove it and charge separately via cradle battery slot. Once full pop it back in and confirm that the red limit switch is properly closed.
Hit Green+DPad+Red+Power+Reset to get into BootLoader mode. Shove it back into the cradle and flash with the ROM linked below. In case after flashing soft reset does not work attempt hard reset that should do the trick.
After that you can flash your Xda II to your heart's content.
:arrow: Default
Re: O2
[Krueger said:
Dr.Stein]Ensure that your battery has juice. Remove it and charge separately via cradle battery slot. Once full pop it back in and confirm that the red limit switch is properly closed.
Hit Green+DPad+Red+Power+Reset to get into BootLoader mode. Shove it back into the cradle and flash with the ROM linked below. In case after flashing soft reset does not work attempt hard reset that should do the trick.
After that you can flash your Xda II to your heart's content.
:arrow: Default
Click to expand...
Click to collapse
you da man (Y)......
entered bootloader mode.....but didnt download the link (rom you posted) directly goin for the official rom......and so far so good...its upgrading rom image......says 2% thanks alot mate.....
regards
jeetz
Hi,
I have a G3 Prophet, I did flash it with WM6 before & it worked but now every time i try to flash with [pdaviet] 4.0.0.0.4s_pv or other WM6 roms i get the same freakin error " Could not update itsutils.dll to the current version, maybe its in use?"
I tried restarting my activesync & rebooted the pc (winxp), The funny thing is when i try to flash with the NOID WM5 flash it works great.
I also flashed a G4 Prophet & it worked.
Before reflashing...
U need to downgrade to WM5 OEM with e.g : RUU_Prophet_220734_2207114_024721_NVID
(Look for on this board )
I had the same problem.
+
0pal said:
U need to downgrade to WM5 OEM with e.g : RUU_Prophet_220734_2207114_024721_NVID
(Look for on this board )
I had the same problem.
+
Click to expand...
Click to collapse
I did that already using the same file "sharebigfile.com_RUU_Prophet_220734_2207114_024721_NVID" & i understand that once i get to the boot screen, i need to flash to WM6 but it just doesnt work.
Any other suggestions ??
naser404 said:
I did that already using the same file "sharebigfile.com_RUU_Prophet_220734_2207114_024721_NVID" & i understand that once i get to the boot screen, i need to flash to WM6 but it just doesnt work.
Any other suggestions ??
Click to expand...
Click to collapse
1.When you get to the boot screen, let WM5 start, tap once and do a hard reset.
2.Load WM6.
I just tried that, still no go. ANy other suggestions ?
naser404 said:
Hi,
I have a G3 Prophet, I did flash it with WM6 before & it worked but now every time i try to flash with [pdaviet] 4.0.0.0.4s_pv or other WM6 roms i get the same freakin error " Could not update itsutils.dll to the current version, maybe its in use?"
I tried restarting my activesync & rebooted the pc (winxp), The funny thing is when i try to flash with the NOID WM5 flash it works great.
I also flashed a G4 Prophet & it worked.
Click to expand...
Click to collapse
If you followed exactly what others suggested, it should be okay. Read the Sticky notes on top of the forum and follow EXACTLY word by word.
If you think you have done so but still failed, there is another way to get around the "itsutils.dll in use" problem -- just copy the 2 .cabs (Cert_SPCS.cab and EnableRapi.cab) in the folder of the new ROM, into the PPC phone any directory and run them. then repeat the 2nd step. It will go away. But that is not a clean method.
Hope it helps. Good luck.
SeaPea said:
If you followed exactly what others suggested, it should be okay. Read the Sticky notes on top of the forum and follow EXACTLY word by word.
If you think you have done so but still failed, there is another way to get around the "itsutils.dll in use" problem -- just copy the 2 .cabs (Cert_SPCS.cab and EnableRapi.cab) in the folder of the new ROM, into the PPC phone any directory and run them. then repeat the 2nd step. It will go away. But that is not a clean method.
Hope it helps. Good luck.
Click to expand...
Click to collapse
and remember to use the correct G3 ROMUpdateUtility.exe file in the first step!
SeaPea said:
If you think you have done so but still failed, there is another way to get around the "itsutils.dll in use" problem -- just copy the 2 .cabs (Cert_SPCS.cab and EnableRapi.cab) in the folder of the new ROM, into the PPC phone any directory and run them. then repeat the 2nd step. It will go away. But that is not a clean method.
Hope it helps. Good luck.
Click to expand...
Click to collapse
Just wanted to thank you SeaPea, it "Finally" worked & i hope i can pay you back.
1 question though, what do you mean by not a clean method ?
Thanx again
hi naser404,
i also got same problem when upgrading wm6
1.Finished step1 (downgrade to wm5nvid)
2.Restart ppc, show welcome screen and .....
3.Windows will inform you to do setting (activesync)<---don't do this part
4.click cancel and windows will use "Guest" to link with ppc
5.run upgrade.bat
hope it can help you
P.S.my english is not good, just try to give you some advise
Hang83 said:
hi naser404,
i also got same problem when upgrading wm6
1.Finished step1 (downgrade to wm5nvid)
2.Restart ppc, show welcome screen and .....
3.Windows will inform you to do setting (activesync)<---don't do this part
4.click cancel and windows will use "Guest" to link with ppc
5.run upgrade.bat
hope it can help you
P.S.my english is not good, just try to give you some advise
Click to expand...
Click to collapse
Thanx a lot Hang83, I'll give that also a go & see how things work. I am greatfull to all you guys for the help.
Naser
Hi.
During upgrade to Crystal V3, I get this error at the end:
Please look at attached image...
Anyone knows what the fault is?
PS. This is the new Prophet that I got as a replacement for the old, bricked one...
Regards.
Try to move the install folder to C:/
I'm not sure if it is the same error message, but months ago I had the same prob and after this it worked.
Good luck
Tried, no luck...
hifiasylum said:
Tried, no luck...
Click to expand...
Click to collapse
reset phone and restart PC.. after that install aku 2.2 and retry..
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
hifiasylum said:
Done, no luck...
Will try with another PC. Maybe this phone is locked?
Will go on a search in the forum later tonight.
Thanks for all help.
Will make it in the end!
Regards, Lars
Click to expand...
Click to collapse
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Did you perform step1 before running Crystal upgrade?
I had the same problem... It worked successfully on a different computer.
panda88 said:
Did you perform step1 before running Crystal upgrade?
Click to expand...
Click to collapse
Yes, I allways downgrade before I upgrade.
Really, I do.
l3v5y said:
I had the same problem... It worked successfully on a different computer.
Click to expand...
Click to collapse
I have now tried 6 different computers, no luck. Believe that the fault is that I must unlock the phone or something. Donno, maybe the easiest thing is to sell the whole phone and get one a little more "programming friendly"?
dkleuven said:
In the WM6 install folder ou will find 2 .cab files.
Bring them to the mobile and install them.
After that try again.
Should work.
Click to expand...
Click to collapse
You dont think this will in some way or the other f_ _k up my Prophet?
hifiasylum said:
You dont think this will in some way or the other f_ _k up my Prophet?
Click to expand...
Click to collapse
It shouln't!
I saw from one of the thread, somebody also has the same exact problem, this is caused by the path is too long. It is suggested to put it in C:\, which you said you have done. The other person reported that it's working after he moved the installation file. I dun understand why it wouldn't work with yours.
Here is the post, finally found it:
http://forum.xda-developers.com/showthread.php?p=1549150#post1549150
User reported the problem was solved in #318
did u unlock CID yet?
Hi again. Found the problem. It seems that I was using a somewhat corrupt downloaded rom. The rom was ok, but it must have been destroyed during the downloadprocess.
Now the phone has Gullum Touch IX installed and works like a charm.
Thank for all your help, great forum!
Regards, Lars
818pro problem during upgrade to wm6
hai..
during upgrade my dopod 818pro to wm6, suddenly blackout and my upgrading was disrupted.. i reset back my dopod 818pro to continue back my upgrading..
but, I'm facing a problem which it's just hanging at start up screen..
i already try hard reset many time, but still can't to operate..
i just want to synchronize back to my pc to continue back my upgrading...
could somebody help me to this matter.. i don't know what to do now..
if it can enter bootloader, check the wiki for recovery, and follow it through.
how to flashing the XDA O2 Atom..
satunusa said:
how to flashing the XDA O2 Atom..
Click to expand...
Click to collapse
Pick one from my signature
dolphinxda said:
Pick one from my signature
Click to expand...
Click to collapse
step by step please how to flash my xda O2..
couse i don't know how to do that...
if u got files like .nb0 u'll have to copy the files into ur SD card n press the "On/off button + Camera Button + Reset Button" than it'll go into bootloader mode. After that u'll just have to wait for it to flash. make sure ur battery is full though or else u might "kill" ur PPC ;-)
I suggest you do a bit more threading before attempting........read all threads and understand what is involved as a simple mistake will cause your Atom to brick.....
Hi,
I've installed HSPL and wanted to go back to SPL, so I downloaded any random ROM (Salvatiion) and put the LEOIMG.nbh in the root of my sd card. Rebooted and ran the nbh. But instead of going back to the original SPL, I still have the salvatiion stuff and I've still got HSPL. How do I go back to my old version of SPL and the original Windows Mobile 6.5?
I can't read my ROM version since it now reads Salvatiion WWE :S
tnx in advance
2 Ways to remove HSPL.
- install stock ROM over SD.
- Using HSPL2_RUN.exe and select a spl value.
kurt-willems said:
2 Ways to remove HSPL.
- install stock ROM over SD.
- Using HSPL2_RUN.exe and select a spl value.
Click to expand...
Click to collapse
There is one strange problem. I am unable to connect my HD2 with my pc using activesync. I have to use the diskdrive function. I will try to find out what a stock rom is and try to fix the problem this way.
mwestra726 said:
There is one strange problem. I am unable to connect my HD2 with my pc using activesync. I have to use the diskdrive function. I will try to find out what a stock rom is and try to fix the problem this way.
Click to expand...
Click to collapse
Yes it worked!
Downloaded official ROM, copied a LEOIMGnbh and the RUUSIGNED.nbh to SD card and now everything is back to normal
mwestra726 said:
Yes it worked!
Downloaded official ROM, copied a LEOIMGnbh and the RUUSIGNED.nbh to SD card and now everything is back to normal
Click to expand...
Click to collapse
You're welcome sir.