Related
Hi, All
I have been having problem flashing my HTC Touch HD2 back to stock.
I have followed the instructions on Bepe's Thread but I am still having problem.
This is what I have done:-
1) Formatted my MicroSD with FAT32
2) Copied the NBH from stock rom, renamed to LEOIMG.NBH & copied to route of memory card.
3) Inserted memory card into phone, held down Volume down button for 3 Seconds & pressed power button.
I get the multi coloured screen but no instruction to flash rom. It just stays on that screen & nothing happens.
I have tried different roms & different memory cards just to test it, but still no luck.
My HD2 is running HSPL & Topix Custom rom.
I would appreciate the help as I am selling my HD2 with Warranty & don't want void Warranty.
Please Help
Thanks
JAW$
not totally sure, but you might need a gold card to do this....
Sihaz said:
not totally sure, but you might need a gold card to do this....
Click to expand...
Click to collapse
Hi,
Do you think I should try HARDSPL ing the phone again
Thanks
JAW$
does it come up as HSPL on bootloader screen?
Tbh you might as well re-install HSPL as administrator.
Then re-download and checksum the leoimg.nbh.
Also check if the device sees the SD card and can read it in normal use in the ROM.
If in doubt, you can always install the stock ROM via the RUU app which HTC provide. that should overwrite HSPL.
chris_ah1 said:
does it come up as HSPL on bootloader screen?
Tbh you might as well re-install HSPL as administrator.
Then re-download and checksum the leoimg.nbh.
Also check if the device sees the SD card and can read it in normal use in the ROM.
If in doubt, you can always install the stock ROM via the RUU app which HTC provide. that should overwrite HSPL.
Click to expand...
Click to collapse
I have flash my HD" with Stock HTC RUU ROM, but the SPL version has not changed
yeah re install hspl....did you back-up your official stock rom?
JAW$ said:
I have flash my HD" with Stock HTC RUU ROM, but the SPL version has not changed
Click to expand...
Click to collapse
did you flash it via sdcard then? if you did it should have overwritten..
if you are still struggling to get the file recognised flashing via the sdcard, then try another sdcard, such as the original 2gb one it came with..
Try plugging the device in to the mains. Sometimes does weird things for me... If it is, then unplug it and try again.
It also may work better with FAT (FAT16) rather than FAT32, but I have flashed ROMs from FAT32.
i sucessfully put my o2 ROM back on, ! i checked the SPL and even that went back to stock. flashed as you did, from the storage card! mmm!
JAW$ said:
1) Formatted my MicroSD with FAT32
[...]
I get the multi coloured screen but no instruction to flash rom. It just stays on that screen & nothing happens.
JAW$
Click to expand...
Click to collapse
I had the same thing. I eventually succeed after formatting my microSD INSIDE the device. Before I formated it in my notebook.
Try this way.
Segoy
Segoy said:
I had the same thing. I eventually succeed after formatting my microSD INSIDE the device. Before I formated it in my notebook.
Try this way.
Segoy
Click to expand...
Click to collapse
I followed Segoy's way.
It works!
THX mate
Segoy said:
I had the same thing. I eventually succeed after formatting my microSD INSIDE the device. Before I formated it in my notebook.
Try this way.
Segoy
Click to expand...
Click to collapse
What was your problem & what exactly did you do.
I have tried what you said but still can't get it to work.
Thanks
JAW$
Hi,
Could you tell what you exactly done & what rom you used. I really need to get this done for tomorrow as I have to send the phone off as I have sold it.
Please please explain in detail as I will do exactly what you done.
This has been lingering for a few days now & I have contacted numerous people without success.
Appreciate your help
JAW$
jaws
1 are you sure you are using the correct rom.you haven't said whether your phone is htc unlocked or provider rom locked.
2 you never answered the question as to how you were flashing, because you said that you flashed the wwe but hspl was still there, which can only mean you used usb, plus if your phone is provider locked then you need a different rom.
confirm you have the correct rom , format your sd card through the phone, copy over the ruu signed.nbh rename leoimg.nbh
reboot your phone holding down volume.
anything?
Hi
Does this procedure of getting back the spl makes HARD RESET ?
Thanks
kikoj said:
Hi
Does this procedure of getting back the spl makes HARD RESET ?
Thanks
Click to expand...
Click to collapse
yes
.....
samsamuel said:
jaws
1 are you sure you are using the correct rom.you haven't said whether your phone is htc unlocked or provider rom locked.
2 you never answered the question as to how you were flashing, because you said that you flashed the wwe but hspl was still there, which can only mean you used usb, plus if your phone is provider locked then you need a different rom.
confirm you have the correct rom , format your sd card through the phone, copy over the ruu signed.nbh rename leoimg.nbh
reboot your phone holding down volume.
anything?
Click to expand...
Click to collapse
The phone is unlocked & Simfree. When I flashed it with the WWE rom via USB.
Also I renamed the stock rom to leoimg.NBH & copied to root of memory card. I held down the Volume down button for three seconds & then pressed & held the power button. When I had it formatted as FAT32 nothing would happen, but when I flashed it with FAT16 I got a White loading screen & nothing happened after that.
I can get into the Hard Reset Screen.
What am I suppose to see on the screen.
Thanks
JAW$
JAW$ said:
The phone is unlocked & Simfree. When I flashed it with the WWE rom via USB.
Also I renamed the stock rom to leoimg.NBH & copied to root of memory card.
Thanks
JAW$
Click to expand...
Click to collapse
OK, just to confirm, you downloaded the wwe .exe file, you opened the exe with a zip program, extracted RUU_Signed.nhb, moved ruu-Signed.nbh to your sd card, which you had formatted IN THE PHONE and then you renamed ruu_sugned.nbh to leoimg.nbh
Then, phone off, , , press and hold vol down, tap power but contiune to hold vol down.
phone SHOULD boot into bootloader, and it should automatically discover there is a leoimg.nbh file on your sd card.
If it is the wrong image, you should get a failed instal, but if you phone does nothing at all then either the sd card is faulty, or teh sd card reader, or the nbh file.
just a thought, when you are renaming the ruu_signed.nbh to leoimg.nbh, you do have file extensions shown? becaue if you don't, then you could be renaming the nbh file to leoimg.nbh.nbh , , , you wouldn't be the first.
itoYo how did you do it?
Hi itoYo i have the same problem have to return it to o2 and need to change it back to ROM 1.4 how did you do it? in very simple language please?
Mate, hold volume down and power buttons a bit longer
It will go from that tri-color screen to a procedure of installing
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
IndigoHD said:
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
Click to expand...
Click to collapse
Who the f*ck claimed that you should install an official update via SD?
Do you don't know, that you will lose your HSPL and there is still no HSPL for 3.03?
Please follow this thread, maybe we can solve your problems...
is there actually a way to fix this?
maybe with goldcard and official 1.48 rom?
IndigoHD said:
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
Click to expand...
Click to collapse
Flash Stock Rom 1.66 ore 1.47 from SD; (hope you can downgrade your spl version)
when this is done correctly flash Stock Rom 3.14 by using your RUU_Leo_S_HTC_xxx_3.14.xxx.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
then you can start to flash custom Rom by using SSPL.
I don't get it way you did this on this way when in the same time on the Artemis Rom thread there is a full instruction on how to do it.
post #26465
How can i do that?
EDIT: i just shed a tear of joy.
My HD2 has been reborn.
For some beautiful, yet unknown, Reason it let me flash 1.48 not.
Not using SD-card method, but regular usb cable method.
i now have SPL-1.4.2.0000 again and a phone in working condition.
IndigoHD said:
How can i do that?
EDIT: i just shed a tear of joy.
My HD2 has been reborn.
For some beautiful, yet unknown, Reason it let me flash 1.48 not.
Not using SD-card method, but regular usb cable method.
i now have SPL-1.4.2.0000 again and a phone in working condition.
Click to expand...
Click to collapse
Yeah!!!!
Crusoe86 said:
Yeah!!!!
Click to expand...
Click to collapse
Thank you so much Crusoe. So very, very, very much... you and everyone who tried to help me.
It doesnt matter that i ended up getting it to work again differently..... i owe you one.
All of you.
and Crusoe... if you have some time to teach me the things i OBVIOUSLY dont know..... id love to just talk to you.
I guess i have a LOT to learn.
Some kind of isntant messenger? perhaps?
htc hd2 softwared update failed
please help me.. i have a htc hd2 with screen update failed...
[email protected]
please help me..
813-369-3081
ricotreo700p said:
please help me.. i have a htc hd2 with screen update failed...
[email protected]
please help me..
813-369-3081
Click to expand...
Click to collapse
Tried this and solved same error :
http://forum.xda-developers.com/showthread.php?t=668347
please tell me how did you fixed it?
kurt-willems said:
Flash Stock Rom 1.66 ore 1.47 from SD; (hope you can downgrade your spl version)
when this is done correctly flash Stock Rom 3.14 by using your RUU_Leo_S_HTC_xxx_3.14.xxx.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
then you can start to flash custom Rom by using SSPL.
I don't get it way you did this on this way when in the same time on the Artemis Rom thread there is a full instruction on how to do it.
post #26465
Click to expand...
Click to collapse
wow,
really nice help,
hope i can fix my hd2
thanks cruise for all the nice tips and tricks...
Can anyone point me in the direction of flashing a ROM with an SD card?
Can this be a custom rom?
I flashed via sync (cable) a zillion times, but latest chuckydroidrom I flashed, my phone can't be recognised anymore, so no active synch. but the phone does work. only I can't sync which is obviously a problem..
can anyone help me?
Thanks for the support
edit: I downloaded an older version of windows mobile device center and that did the trick!
1) Prepares your SD (<8GB SD Card)
a) Format your SD by FAT32
2) Take the "RUU_signed.nbh" from your ship ROM and copy it to the SD card.
3) Rename the "RUU_signed.nbh" to "leoimg.nbh".
4) Reset the device while pressing the volume down button.
5) Follow the instructions on your screen.
thanks kurt
Version of OS: 5.2.21869
Manila: 2.5.19211619.0
ROM: 1.66.404.1 (76641) NLD
RADIO: 2.06.51.07
this was my rom, where can I find this stock rom? And does the install of this rom erases HSPL?
will this one be good: RUU_Leo_HTC_NLD_1.66.404.1_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
Here you have the 1.66 NLD stock ROM and yes, flashing over SD will remove HSPL.
thank you for the advice.
I will wait for the dev and if he answers (I really hope so) to help, and if not this is my only way out. so thanks for your advice kurt! really strange that the phone won't sync.
HectiQ said:
thank you for the advice.
I will wait for the dev and if he answers (I really hope so) to help, and if not this is my only way out. so thanks for your advice kurt! really strange that the phone won't sync.
Click to expand...
Click to collapse
Can you get into Bootloader? if you can, and connect from there to your PC; it will mention "USB" at the bottom. If this is the case you can also flash.
kurt-willems
Can you please tell me,why my hd2,not flashing from SD.J tried billion times,with 8 sd cards.
Boot,shows loading for a millisecond,and boot again.Its brand new phone,last one was same hd2,but none of those problems.
Please help,or any suggestion.
kurt-willems said:
Can you get into Bootloader? if you can, and connect from there to your PC; it will mention "USB" at the bottom. If this is the case you can also flash.
Click to expand...
Click to collapse
yes, I can get into bootloader, but then I get the message that the qualcomm driver is not found, and before it always found it. very strange! and I tried on all my pc's, not one can recognise it
msg: qualcomm cdma technologies msm driver not found.
HectiQ said:
edit: I downloaded an older version of windows mobile device center and that did the trick!
Click to expand...
Click to collapse
Nice to see it's bean solved.
iannius said:
kurt-willems
Can you please tell me,why my hd2,not flashing from SD.J tried billion times,with 8 sd cards.
Boot,shows loading for a millisecond,and boot again.Its brand new phone,last one was same hd2,but none of those problems.
Please help,or any suggestion.
Click to expand...
Click to collapse
Use a smaller SD card. 8GB SD cards caused lot of problems.
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
A.Calamita said:
Ok,
I've downloaded a stock ROM from the HTC site and want to install it. I keep getting error 266. Yes I've read the wiki, searched plenty. Tried most fixes.
Just want to know, if I'm flashing a stock ROM do I need to install HSPL first?
The tutorials I've found are mostly for custom ROMs and as far as I know for a custom ROM you need to install HSPL.
Do you need to install this for a stock ROM?
Thanks.
Al
Click to expand...
Click to collapse
No sir; Stock ROM don't need HSPL, (and certainly not in combination with 3.14 stock ROM)
Error 266 is a connection problem; are you well connected over active sync? did you disconnect AntiVirus temporary?
From where do you get start Home-screen or Boot-screen?
Witch stock rom are you trying to install?
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
A.Calamita said:
I didn't think that it needed HSPL.
Yes, I've double checked the connection in windows mobile device centre. (running windows 7)
I have turned off the realtime protection with macafee.
It gets to the bootloader (Multicoloured screen)
It says USB in the white section at the bottom. Installs drivers but then errors with 266.
The ROM I'm trying to install is 3.14 from the HTC support site (Cannot post link)
Would it be a good idea to try an older ROM first?
Thanks,
Al
Click to expand...
Click to collapse
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
kurt-willems said:
No, no need of a older ROM.
And about the link; no needed. I know it
A suggestion is to try to flash while you are on home screen instead of Bootloader; and try a otter usb port (if you have).
Ps; restart your pc and device firs.
PS 2; don't forget to run the RUU_Leo_S_HTC_... by administrator [right click on it and select Run as administrator]
Click to expand...
Click to collapse
I've tried it from the homescreen (I think) Whats the difference? I plugged in the usb cable and selected activesync mode. Then as it starts to gather information it changes to the bootloader.
I've tried different usb ports. Also tried a hub. I've rebooted my laptop and phone many times.
And I've also tried running as an administrator.
I don't suppose that you can unpack the .exe and transfer it to the memory card and run it from there?
And I don't suppose having HTC Sense disabled would cause any issue.
I could try a hard reset. Although it would restore it (would do once its updated ROM anyway) but I don't want to have to set it all up again if the update doesn't work.
Any more idea's?
Thanks,
Al
Okay; strange.
Try than to flash over SD.
- Take your "RUU_Leo_S_HTC_..." file and extract the "RUU_signed.nbh" file from the ROM, rename it to "leoimg.nbh" without ""
- Place the "leoimg.nbh" on the root of ur SD.
- Reset the device while pressing the volume down button.
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
A.Calamita said:
I'm just about to try that! Just watched a vid on youtube!
Thanks for your help! I'll see how it goes!
Click to expand...
Click to collapse
PS, don't forget to use a SD < 8 GB (a 2GB SD would be perfect) and format it by FAT32
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Software update failed. Please try again :O
Will it have bricked it?
A.Calamita said:
I've just thought about that. I only have an 8gb card I think! I had a spare but I can't find it!
Why can you only use a card < 8GB?
Click to expand...
Click to collapse
Because 8GB SD cards or bigger caused problems.
A.Calamita said:
Software update failed. Please try again :O
Will it have bricked it?
Click to expand...
Click to collapse
Did you use a <8GB SD?
when you downloaded the stock ROM from the HTC webpage you used your S/N?
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
A.Calamita said:
Yes, I found my old 2gb card.
And yes, I used my own S/N
Its ok, it's done it now. It restarted automatically and managed to do it this time!
Was a tense 5 minutes!
Thanks for your help! Much appreciated!
I also checked out some of your work in the meantime to keep me calm! Some good stuff Keep it up!!
Thanks, Al
Click to expand...
Click to collapse
Fine to see it's working now. Have fun.
After having problems with Android NAND i have decided to move back to win mobile 6.5, so i flash back to 3.14.xxx
every time when i turn off and on the phone its do everything that a first time boot do, after ages when the phone finally gets on all the settings are stock,
any solution for this ?
Did you run a Task 29 before flashing the Win Mo ROM?
T-Macgnolia said:
Did you run a Task 29 before flashing the Win Mo ROM?
Click to expand...
Click to collapse
yes, i did
Hmmm what ROM is it? Is it a official or custom ROM?
T-Macgnolia said:
Hmmm what ROM is it? Is it a official or custom ROM?
Click to expand...
Click to collapse
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Gihanfx said:
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship
tried another ROM but same results
Click to expand...
Click to collapse
Ok that is a official ROM. did you get it from HTC.com using your serial number to confirm it is for your HD2? Also have you thought about flashing it via SD card?
Oh and you don't have to hit the thanks button for every reply but thank you for the gesture.
T-Macgnolia said:
Ok that is a official ROM. did you get it from HTC.com using your serial number to comfirm it is for your HD2? Also have you thought about flashing it via SD card?
Click to expand...
Click to collapse
Ill try and it let you know, Thanks a lot
Gihanfx said:
Ill try and it let you know, Thanks a lot
Click to expand...
Click to collapse
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
T-Macgnolia said:
Thanks for adding that as I forgot to mention that. But there is very few custom ROMs that do not require HSPL.
Click to expand...
Click to collapse
imanh said:
Yes Flash through SD and the problem will be gone , keep that in mind that flashing through SD will DELETE HSPL and be carefull what you flash , Flash stock rom that you have downloaded from HTC for flashing through SD and before flashing any custom rom besure to have HSPL installed if requiered
tell us what happend
Click to expand...
Click to collapse
did everything as in the guide, but still the same problem
Gihanfx said:
did everything as in the guide, but still the same problem
Click to expand...
Click to collapse
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
T-Macgnolia said:
The only thing I can think may be causing your issue is if you have a bad block or twoin your NAND memory and it is not letting it save your your information and thefact that it has went through the set up. I would tell you how to check your blocks bit to be honest I really am not sure how you do it.I know you have to use some kind of softwarecto do it with your computer and have your HD2 connected to your computer. Sorry friend, maybe some other members here can help you further.
Click to expand...
Click to collapse
Thanks again for the Help, after installing the new ROM i got far too many errors, but i restarted the phone so many times and things are back to normal, still when i access google maps the phone restarts and cant access the market place cus the update always fails, i also feel there is something wrong with the memory, anyway thanks again