i tried to install wm6 for my device but the install failed and i was stuck with a red, green and blue screen that displays IPL 2.28.0001 and SPL 2.28.0001.... can anyone tell me how to fix this problem?
not really a problem, just flash back your official WM5 ROM.. That rainbow screen is called the bootloader screen.. Can you see usb at the bottom of the screen
I can not find the original rom for my phone
and yes i do see the usb sign on the bottom of the phone screen
Download Wizard Love Rom then... it should enable you to boot your mobile phone again!
do you want me to use the softSpl
softSPL requires you to have a working OS...
For you to be able to flash Wizard Love, you need RUU_NoID.
I'm new to this so what is the RUU_noid... my screen only has RUU on the top right of the screen
zellbz said:
I'm new to this so what is the RUU_noid... my screen only has RUU on the top right of the screen
Click to expand...
Click to collapse
If the device has RUU in the bootloader that is easy to fix:
Connect your phone to the usb
kill wcescomm.exe in taskmanager
open mtty.exe
connect throug: \.\\wces*** port
and in the white screen:
press [enter]
->now a CMD will pop up
@CMD type:
password XTC[enter]
ruurun 0[enter]
ResetDevice[enter]
The device will now reboot
If the OS is OK it will boot the OS, otherwise it will stop at either Bootloader or 3rd splash.
zellbz said:
I can not find the original rom for my phone
Click to expand...
Click to collapse
Hi there, bro I can find it for you, I must just know in which country you live and what operator. Like I live in South Africa and use the wwe rom from I-mate itself as original base rom, Netherlands is orange I think, so these details needs to be known as a wrong rom might render it useless. (Bricked, dead kapoot etc....)
Related
I was flashing my brothers phone for him, and I was using the CID Workaround, and it completed, and then after a hard reset the device wouldnt go past the first splash screen.. pllease help
If your able to get into bootloader mode then you should be able to flash another rom such as wizard love or your providers rom.
If you read the thread on unlocking G4 cid locked using shell tool you will see what i mean. I personally was stuck in a very similar situation and received help, so the info you need might be in that thread.
nstefanelli said:
I was flashing my brothers phone for him, and I was using the CID Workaround, and it completed, and then after a hard reset the device wouldnt go past the first splash screen.. pllease help
Click to expand...
Click to collapse
Check your PM's
bwesty said:
If your able to get into bootloader mode then you should be able to flash another rom such as wizard love or your providers rom.
If you read the thread on unlocking G4 cid locked using shell tool you will see what i mean. I personally was stuck in a very similar situation and received help, so the info you need might be in that thread.
Click to expand...
Click to collapse
i used the shell tool, but i just got stuck on the first splash after i did that.... here are device specs
Its a Cingular 8125, obivously g4
IPL 2.25.0001
SPL 2.25.0001
It doesnt get past bootloader, and I would really like to put WM6 on it.
At this point, I've tried various other ROMs and nothing is working. Any thoughts or ideas at all would be appreciated. Thanks.
jUST DO WHAT I SAY
gREETINGS,
Just follow this steps u will be out of it.
Press and hold the camera button and reset the phone, hold the camera button until you see the tri color screen (bootloader), when u are on tri color screen connect the USB with your phone(dont see for active sync it wont recognise but it will be connected), and then flash your phone with the rom your provider has given you i.e, the original rom and DONT flash it with shell tool use the exe file of the rom.
When you are at the original rom then try to flash the WM6 with shell tool and follow the instruction properly.
Thanks
samy.3660 said:
gREETINGS,
Just follow this steps u will be out of it.
Press and hold the camera button and reset the phone, hold the camera button until you see the tri color screen (bootloader), when u are on tri color screen connect the USB with your phone(dont see for active sync it wont recognise but it will be connected), and then flash your phone with the rom your provider has given you i.e, the original rom and DONT flash it with shell tool use the exe file of the rom.
When you are at the original rom then try to flash the WM6 with shell tool and follow the instruction properly.
Thanks
Click to expand...
Click to collapse
I cannot do that because the Carrier ROMs that I have aren't for G4, so they arent working. I have three different carrier ROMs for my phone.. and none of them work.
-Stefanelli-
nstefanelli said:
i used the shell tool, but i just got stuck on the first splash after i did that.... here are device specs
Its a Cingular 8125, obivously g4
IPL 2.25.0001
SPL 2.25.0001
It doesnt get past bootloader, and I would really like to put WM6 on it.
At this point, I've tried various other ROMs and nothing is working. Any thoughts or ideas at all would be appreciated. Thanks.
Click to expand...
Click to collapse
Check your email, I downloaded and zip works fine here.
i'm facing this problem right now , i will solve it with the original rom .
the problem started when i used shelltool to upgrade my G4 CID Locked to windows mobile 6 crossbow underground edition .
i will give it another try when i get my device alive again ,
any suggestions for the WM6 underground to make it work using shelltool on my wiza 200 ??
--------------------- Edit -----------------------
Finally i solved the problem and installed Crossbow WM6 underground edition .
all i did is to install the original rom from provider and then used shelltool to install WM6 .
i want to mention that my wiza200 is G4 and its CID Locked .
Huge thanx to mUn , you are da man
Mmm
I've tried underground wm6, but flashing till 96%, then error 302. I've searching for love rom few hours at night, then finally found, it is using the same flashing frontend (but in italian? language), flashed ok, phone's running. I've tried some few other wm6 roms, but always errors like "too old, get new one" or once it was probably fake, because it loaded exactly the same ROM as love one is. So, now I've probably stuck on WM5 at all
lobiik said:
I've tried underground wm6, but flashing till 96%, then error 302. I've searching for love rom few hours at night, then finally found, it is using the same flashing frontend (but in italian? language), flashed ok, phone's running. I've tried some few other wm6 roms, but always errors like "too old, get new one" or once it was probably fake, because it loaded exactly the same ROM as love one is. So, now I've probably stuck on WM5 at all
Click to expand...
Click to collapse
whats your device and is it G3 or G4 ?
try to do as i did and it worked for me , install the provider flash , then try shelltool to flash WM6 underground .
WBR
a-h-t1 said:
whats your device and is it G3 or G4 ?
Click to expand...
Click to collapse
Mine is G4, dunno if cid is locked or not. I've flashed it as I said with wizard love rom and working without problems. I've tried that again this morning, to flash from love rom, but the same. At 96% it hangs, error 302 Communication error, then starts recovery process, phone goes to bootloader mode. Then is possible to flash it with love rom again with no problem
g4
i have a g4 wizard using the shell tool i have chaged my rom on my phone sometimes 3 times a week just to test them out
the shell tool works if you cant download from the forum here is the link for it
http://rapidshare.com/files/17787647/ShellTool_bugfixed.zip
G4
yes, but when I run shelltool, and press get rom info, all fields states N/A
info from phone is:
ROM Version: 2.26.10.2 WWE
Radio: 2.25.11
ExtROM: 2.26.10.105
IPL/SPL: 2.17.0001
And anyway, dunno exactly which rom for WM6 I can put in (I've just 5.underground_edition_Crossbow_ROM.exe which stucks at 96% with 302 error)
well, I'm dumb, mislooked one stupid thing. Everything passed without errors, Windows Mobile 6 is up and running
happy to know that , the problem was installing rapi ha ??
WBR
No, not really, rapi and that second cab was in device, it was restarted, but I did a mistake - i didn't copied that desired rom into updater directory - that was why were all fields N/A... did that, flashed on first try, without problem
I had the same problem, orginal rom from the provider, and I can reflash it again.....
THX for the info......
ROM verion and link location
Hi lobiik,
which ROM did you use for your device, as you comments above:
"i didn't copied that desired rom into updater directory "
can you please point me to location where i can get the ROM, also proper steps to install the same.
Thanks,
Ajay
HELP!!!!!!!!
I tried flash my G3 with shelltools the program said it worked well i did hard reset then i turned it on it is stuck on 1st front screen bootloader mode is stuck i dont know what is is my device bricked
---------------------edit--------------------------
im a newbie
Mine is X01HT Japanese docomo ROM
When I try any flash activeSync disonnect and closes just after I click on the last screen RRU upgrade button.
True with any rom rru
Any idea ?
This is normal. The program used to flash the ROM will put the device into bootloader mode (colored bars on the screen) and this will cause activesync to disconnect. Just keep waiting and you will see the progress bar that shows the flash progress.
Yes but then the RRU ends in error telling that connexion to phone is not possible
I have seen an other thread saying that with Softbank Hermes RRU does not work
Same Problem Please HELP
athomelin said:
Mine is X01HT Japanese docomo ROM
When I try any flash activeSync disonnect and closes just after I click on the last screen RRU upgrade button.
True with any rom rru
Any idea ?
Click to expand...
Click to collapse
My Orange SPV 3100 was locked on orange and I SIM unlocked only with the help of HTC_Hermes_SIM_CID_Unlock_v3a it worked fine and I now I am using O2 on it
However, now I wish to upgrade it to official wm6 from Orange or HTC it does not work it say USB not connected...and gets stuck on 4 colour boot screen.
Please any suggestion. HELP!
Same Issue
After using the HTC_Hermes_SIM_CID_Unlock_v3a whenever I run a new RRU it goes to the bootloader screen, then disconnects as normal, however when it reconnects activesync doesn't start up
Any help?
Hi does anyone know if there are WM6 ROMs for the SPV C550 if not are there any good WM5 ones?
look topic about wm5 for hurricane, there are also links to wm6 for hurricane device
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
lazaj007 said:
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
Click to expand...
Click to collapse
Has anybody tried this ROM?
lazaj007 said:
hello again
here is latest, almost perfect rom for hurricane:
http://rapidshare.com/files/56833250/566.zip.html
and new SPL for this device:
http://rapidshare.com/files/56616745/spl566wm6_spfans2006.rar
Click to expand...
Click to collapse
Ideal thanks
So is the 566.zip the WM5 or WM6 rom and has it been tested?
Whats the new SPL?
hI ALL, can u tell me the mini guide how to install this rom? I did it once to my sda but I dont remember now, where is the nbfupdatetool and RUU and patched RUU..???
when I type l c:\wm6.bin it give me this:
clean up the image temp buffer at 0x8C080000 Length 0x01B00000 MTTYDownloadImageNot allow operation!
Error : DownloadImage return error (code = 0xFFFFFFFF)
cmd>
maybe damaged rom, or any idea?
Gang: Make sure you're CID unlocked. (Eg, when you issue "info 2", it says HTCSuperCID).
How can do that cid unlock? give me some working link to download that tool or something. thx
here you go
http//www.spv-developers.com/content/SPV-Services.zip
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-press and hold camera button, and put USB cable to your phone
-next check "Y"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\566.bin (localization of your rom)
after succeful installising reboot your phone and it will be end
rom is very good, baterry work better
hmm, thx for guide, I believe it will work, but I have little problem : now I cant even connect to activesync so I cant do cid unlock, any idea how to fix that
lazaj007 said:
here you go
http//www.spv-developers.com/content/SPV-Services.zip
you must check "CID Tool (Alpha)" and click set CID=11111111
after this restart your phone
and short solutions about wm6 installing:
* installation is the same like typhoon
-unlock Super CID
-upgrade new SPL (Patched ruu)
-disable USB connection in ActiveSync
-switch off your phone
-press and hold camera button, and put USB cable to your phone
-next check "Y"
-when your phone will be in bootloader mode (tri color screen) run mtty
- check USB connection in this program
and write: - info 2
- format BINFS
- l c:\566.bin (localization of your rom)
after succeful installising reboot your phone and it will be end
rom is very good, baterry work better
Click to expand...
Click to collapse
Thanks for helping out!
A few questions?
1. This link "http//www.spv-developers.com/content/SPV-Services.zip" takes me to Wikipedia.
2. Where can I find the patched ruu to update the spl. It wasn't in the zip file?
Thanks in advance!
to Mr MIAGY :
1. just write that link starting with www. (without http//, or type http://)
2. in ''wm6 for c550'' topic u will find patched RUU and all needed files, they are ziped together
gangstaunitg said:
to Mr MIAGY :
1. just write that link starting with www. (without http//, or type http://)
2. in ''wm6 for c550'' topic u will find patched RUU and all needed files, they are ziped together
Click to expand...
Click to collapse
DoH! I didn't notice the missing ":"
Cheers!
Anybody have idea why I cant connect to activesync after spl upgrade ? Before spl upgrade it all goes well. Can I do something with it?
if upgrade was complited succes then you must turn off USB connection in Active sync, then run bootloder mode and do everything with instructions.
I did it !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
THank u all, thankS
This rom is amazing, everything work perfect, and it looks beautiful,
one more time thank you. jUUHHHUUUUUUUUU
lazaj007 said:
if upgrade was complited succes then you must turn off USB connection in Active sync, then run bootloder mode and do everything with instructions.
Click to expand...
Click to collapse
Upgrade reported as success
However after reboot I see the WM6 boot screen - loverly ...
Then the Mobile Operator Splash screen ... THEN
After too long ... the phone switches itself off and I have to take the battery out to get reponse again.
Any ideas?
It's a C550 ....
MrMiyagi said:
Upgrade reported as success
However after reboot I see the WM6 boot screen - loverly ...
Then the Mobile Operator Splash screen ... THEN
After too long ... the phone switches itself off and I have to take the battery out to get reponse again.
Any ideas?
It's a C550 ....
Click to expand...
Click to collapse
Ok, so a report. The phone boots, goes through WM6 splash screen, then operator screen, then APPARENTLY dead black screen.
BUT I plugged in the USB cable and the screen came on! WM6 Setup screen! All good go through setup eveything looks GREAT!
Only problem is, if I leave the phone alone for a bout a minute, the screen goes black AGAIN. Then no amount of key pressing on the device will bring it back to life.
Plugging the USB cable in brings it instantly back to life! But This means I can't wander too far from my PC ;-)
ANY Ideas
BTW IT LOOKS FANTASTIC! If I can just get around this issue ;-)
MrMiyagi said:
Ok, so a report. The phone boots, goes through WM6 splash screen, then operator screen, then APPARENTLY dead black screen.
BUT I plugged in the USB cable and the screen came on! WM6 Setup screen! All good go through setup eveything looks GREAT!
Only problem is, if I leave the phone alone for a bout a minute, the screen goes black AGAIN. Then no amount of key pressing on the device will bring it back to life.
Plugging the USB cable in brings it instantly back to life! But This means I can't wander too far from my PC ;-)
ANY Ideas
BTW IT LOOKS FANTASTIC! If I can just get around this issue ;-)
Click to expand...
Click to collapse
Heh heh ... seems I'm posting to myself ... that's cool I like my own company ... So I reflashed the SPL and some of the problems have gone away.
Phone will boot OK now ... but it will still "go to blank screen" and require plugging into the USB cable to "wake it up"
I'm out of ideas now ...
hi friends,
i have one swisscom xpa s200.
i bought this phone with this problem-when i power on,on the screen is only firs splash screen with ipl/spl=2.20.0001
i tried every WIKI method to recovery this device but no luck.
i dont have one official swisscom xpa s200 rom.
what is the problem,can you help me ?
thanks in advance.
greetings from serbia.
MS
Tell me if it works
Go and try get the original rom then enter bootloader mode to flash.Flashing may only be done on xp computers.Get the original rom from this xda site go 4shared.com or the original phone brand site
how to:
1. charge your device
2. make sure you have activesync installed.. if installed you will see an ActiveSync icon on the lower right part of your desktop right click it click connection settings and UNCHECK allow USB connections then press comm+cam +soft reset button to force your device on bootloader, you should see USB on the lower left screen of your device.
3. Download the NVID_RUU.zip extract it and RUN ( it has only one RUU, so it doesnt matter if your device is G3 or G4 )
4. after flashing the RUU and its succesfull try allowing USB connection again on Active Sync..
5. if its still not working.. try downloading the PV_Temp NVID RUU, i dont have a copy of this so try searching for this in the forums..
goodluck!!
PS: you can also read stiky threads over Prophet Mobile 6 Forum
NVID RUU : http://www.mediafire.com/?0wilzm3vzeo
Hello!
My phone isn't working with windows mobile although the windows phone 7 and the android works good with my hd2.
The error is this:
MicropERROR:
Microp Version Mismatch
0x0
Please update lateset Microp
firmware
How can i fix it?
Run Hspl4 choose 3.03.0000
Get the correct 3.14 rom for your phone (example, a German o2 phone needs the German o2 rom, not just any rom)
Flash it from USB, if USB flash fails try it from SD. (Can go straight for SD if ya like, I just say USB first since its quicker and you already set the spl with Hspl4 in step 1, so no benefit from SD)
samsamuel said:
Run Hspl4 choose 3.03.0000
Get the correct 3.14 rom for your phone (example, a German o2 phone needs the German o2 rom, not just any rom)
Flash it from USB, if USB flash fails try it from SD. (Can go straight for SD if ya like, I just say USB first since its quicker and you already set the spl with Hspl4 in step 1, so no benefit from SD)
Click to expand...
Click to collapse
It didn't worked... but thanks for helping
up
Sounds unusual...
try another original wm rom or a custom rom & recommended spl hspl for the rom & see if works ...
Have you tried task29 or flashing via usb with no SD card loaded ...
White screen
Hy! Thanks for read this threat.
I got an hd2. Its software was broken and it cant boot up, just an white screen and happen nothing. I don't know which software was installed to it.
I want to install new ROM this one: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i put on bootlader mode the phone i plug the USB cabel and run the software (as administrator) it start setup and after 1% i get error massage ( error 270 ).
I tried to use task29 white this rom: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but it stuck 0%.
If you have any tip pls share me! Thanks!
jagyugyaerik said:
Hy! Thanks for read this threat.
I got an hd2. Its software was broken and it cant boot up, just an white screen and happen nothing. I don't know which software was installed to it.
I want to install new ROM this one: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
i put on bootlader mode the phone i plug the USB cabel and run the software (as administrator) it start setup and after 1% i get error massage ( error 270 ).
I tried to use task29 white this rom: RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
but it stuck 0%.
If you have any tip pls share me! Thanks!
Click to expand...
Click to collapse
What model TMOUS US or EU ?
If T-Mobile US (TMOUS) then it would be bricked by that ROM with 51 version Radio.
Hopefully it EU model & just an issue with SPL version !
Mister B said:
What model TMOUS US or EU ?
If T-Mobile US (TMOUS) then it would be bricked by that ROM with 51 version Radio.
Hopefully it EU model & just an issue with SPL version !
Click to expand...
Click to collapse
I dont know exactly, i guess it is unlocked. Thats why i dont know, where can i check it?
TMOUS US is easily identified by T-Mobile logo & green/red call/end keys ...
white screen
It has call keys, but its color are grey, but it dont have T-mobile logo
I had succesfully install a OS (Duttys_Leo_Sense_2.5_5.2.21907.5.0.93_1.80_ML_V4_Ship_PT) from SD card. But still happen the same, after i start the phone it has constant white screen.