Related
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
They have a Dopod housing here for $53 US
http://cnn.cn/shop/htc-c-277.html
I'm looking for a LCD hehe
EDIT: ended up getting http://cgi.ebay.com.au/ws/eBayISAPI.dll?ViewItem&item=260108396462&ssPageName=ADME:B:EOIBSA:AU:11
Comes with instructions and the LCD and a tool kit.
sjbale said:
Hi,
Does anyone know where I can get spare parts for the TyTn. I've managed to crush the plastic cover over the camera If anyone would be willing to sell me the spare part from a bricked device then I would be very grateful.
Click to expand...
Click to collapse
Anyone know of any UK suppliers of parts?
Softbank 2MP Camera Part
I am looking for a camera replacement part for my Softbank. I was the part that caused my Softbank to display totally WHITE SCREEN.
Here is the story:
Last five months I accidentally dropped my Hermes on the floor carpet and when I turned it on, it displayed all WHITE SCREEN. I tot the LCD screen was the culprit and bought some LCD for replacement from eBay. I dismantled everything and tried to replace the LCD but it resulted the same WHITE SCREEN. Then I dismantled the Jog Dial and the Camera and reattached part by part. The jog dial caused no problem but the Camera showed positive result on WHITE SCREEN behavior. Now I dismantled the Camera and my SOftbank X01HT works like a charm... Well almost like a charm with no 2MP Camera... LOL...
So I am looking for the part also to put it back on my TyTn...
Hi guys,
Do you know where can I get the TyTN VGA front camera?
Regards
i have a new refurbed TyTN...looks immaculate but is unfortunately suffering from a hybrid brick (corrup CID, no KITL and SPL 1.09)
I have all accessories and original packaging if anyone wants to make me a good offer?? (PM me if you are interested)
should also point out that it has a qwertz keyboard
tytn (spv m3100)
hi guys..
i'm desperate..I can't hear any sound from my pda..I think that my audio hardware broke down..do you know where I can find any spare parts for this?thanx in advance..
first post^^
been looking for these for a long time now and i've never seen the actual 8525 housing at this site, only the tytn/dopod versions, but they're are now in stock!!
just a heads up b/c i read a while back a few people are looking for 8525 housing.
now my 8525 wont be battle-scarred and garish looking <.<;
http://cnn.cn/shop/8525-grey-housing-cingular-p-1852.html
two 8525 phone
i have two 8525 spare part phone. if interested pm me
spare parts for tytn/m3100
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
punkzilla2k said:
I have a m3100 orange that i needs a display and ribbon replacement email me if you have any spare parts or if you know where i can get any from.
my email is [email protected]
PunkZiLLA2k
Click to expand...
Click to collapse
You can find spare parts and accessories here:
http://www.phoneystore.com
8525 front cover and Mail/Explorer rocker needed
Got the phone with these two dented and although it works okay, would like to replace them one day.... anyone have these parts for a few bucks? I can do PayPal real easy....
Thanks,
Ted
Dpad for Cingular 8500
I'm looking for the circuit board behind the dpad of a cingular 8500, if anyone has one left, pm me please.
I am looking for the little cover above the mirror on the back side of the device that is usually part of the battery cover or alternativly the entier battery cover.
If you have them please PM me.
Broken ATT 8525, Touch screen totaled
I was taking photos and drop it right on the face. I was using it as a iPod with a unregistered go phone sim card till I did a Master Reset and now it's a paper weight because I can't do the start up BS. Touch screen is totaled but the rest of the internal parts and battery are good, front cover don't look bad, back is great, have 2 stylus and a hard metal case for it too. PM me here and we'll work something out, Paypal OK. Vince
It's a paper weight to me, I'm not going to put money other than shipping is someone wants to send me a screen for the joy of it, if I fix it I'd just give it to my sister anyway. I'm happy with my Tilt and I'm ready to move on to the Fuse soon, thanks for the replies!!
I travel building Cellular sites a lot and I've been happy with my current Tilt ROM so I haven't logged on and seen all these replies till now. I Love HTC phones and the chefs that put the long hours and headacks into them, They get the big thumbs up from me! Thanks to all also that add and beta test too.
Also I live in the midwest in the US and BASE Jump my towers mostly, if anyone interested in jumping with me let me know and I'll let you know if I'm in the area, I got combo's!!! IF you want to Skydive I live in the Indianapolis area also. --> www.skycircus.com , My DZ 8 miles from home. I'm a Parachute rigger also.
Hebrew keyboard?
I have a TyTN II (T-Mobile UK Vario II) that I'm setting up for a friend in Israel; does anybody have or know where I can get hold of a keyboard with Hebrew lettering?
Thanks
Need a replacement motherboard (main) for HTC TYTN
Friends,
My HTC TyTN has problems with some connectors right on the main motherboard..... I would like to know if anyone has any spare HTC TyTN which is completely broken and can be usable for its spares......
Also, if any one is aware of any site where I can get the mani motherboard...it would be really helpful.
thanks
Milind
I am interested too in a motherboard of Tytn. I have problem that a connector (for a screen flex cable) on my motherboard is damaged. Is it possible to fix it (for example to change that connector with a new one)? Does anyone know how to do so? I really need help...
thanks in advance
Hi,
Has anyone purchased one of the HTC 8525 OEM housings from cnn.cn. If so what was the quality like and are they new housings? None of the re-branded TyTn's seem to use this housing so I'm wondering if they are manufacured specifically for, or by, cnn.cn?
Also, what are the service and delivery charges like from cnn.cn.
http://cnn.cn/shop/8525-full-housing-pi-198.html?osCsid=ee042fbf3e01db3c5bad7913ecdb4a44http://cnn.cn/shop/8525-full-housing-pi-198.html osCsid=ee042fbf3e01db3c5bad7913ecdb4a44
Thanks in advance.
I bought a blackberry case from them and it arrived in 8 days. Great service for 5 USD in my opinion.
I'm curious about that tytn housing unit too.
They have taken it down for some reason.
O was gonna try it.
sjbale said:
Hi,
Has anyone purchased one of the HTC 8525 OEM housings from cnn.cn. If so what was the quality like and are they new housings? None of the re-branded TyTn's seem to use this housing so I'm wondering if they are manufacured specifically for, or by, cnn.cn?
Also, what are the service and delivery charges like from cnn.cn.
http://cnn.cn/shop/8525-full-housing-pi-198.html?osCsid=ee042fbf3e01db3c5bad7913ecdb4a44http://cnn.cn/shop/8525-full-housing-pi-198.html osCsid=ee042fbf3e01db3c5bad7913ecdb4a44
Thanks in advance.
Click to expand...
Click to collapse
Dude you got a TyTN or an 8525?Because are very different..
I havent heard many bad things about them, havent used them personally yet
8525 Housing
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
g35driver said:
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
That'd look great on the 8525. You may want to check this out for a step-by-step guide.
http://www.howardforums.com/showthread.php?t=1152710&page=1&pp=15
Judging by it's looks, it only works with Hern100 devices (8525, m3100, etc) and wont work with the TyTN. (herm200)
I could be wrong though.
The D-Pad layout is a bit different, but if you get the D-Pad
http://cnn.cn/shop/cingular-8525htc-hermes-outside-keypad-p-1610.html
and what goes under the D-Pad, you might be able to get it to work.
But that's kind of not worth the effort though.
I am yet to find a stylish housing for my tytn. It's all scratched out but I hate that Dopod housing.
Since there is no flipping way, HTC is going to make the original housing available to anyone, it would have been nice if someone came out with a more stylish design.
g35driver said:
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I'd love to pick up an all black housing like that but it has one thing that keeps me from doing it.. the front facing camera hole. since i have an 8525.. it would just be an open hole on the front of my phone which would look dumb and get lots of dust inside.
g35driver said:
I might as well just add to this thread
You guys think this is worth a shot? The last owner of my phone jacked up a couple parts of the current housing.
http://cgi.ebay.com/HTC-Magician-qt...yZ108649QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
I have one on the way..
is it really hard to get the original HTC grey version? I've seen loads of the dopod versions, some with some without the video button.
http://cgi.ebay.co.uk/ws/eBayISAPI....m=290143857315&ssPageName=STRK:MEWA:IT&ih=019
is htc but dont know if button configuration is right for hermes 200 (Anyone confirm this?) does that have video button??
http://cgi.ebay.co.uk/ws/eBayISAPI....PageName=STRK:MEWA:IT&ih=015#ebayphotohosting
Its the closest one ive seen to mine but branded CHT DOPOD
Ive seen people ask htc to replace it but had no sucess. Its really annoying considering we all dont keep the phones forever and selling them off is harder when you cant get the original housing replaced.
that black htc housing DOES have the video button but the layout is different than the herm200.
the red hangup button and the green phone button are not on the right place on that case.
I have taken my tytn apart. What goes under the D-Pad in herme200 looks different than the ones in herm100. Even if you did get that case and the right d-pad, your buttons wont fall on the right spot. therefore the phone button and the hangup button wont work.
I wonder if HTC repair center would replace the housing.
check this post
http://forum.xda-developers.com/showthread.php?t=323520
Ok, so as the title suggests, i'm looking at replacing the housing of my vario (cause its scratched to hell - keys in pockets, and the odd drop )
After looking at http://cnn.cn/shop/8525-blacksilver-full-housing-p-198.html was wondering whether these were suitable for straight swap? as obviously the keypads are different between the herm100/200/300 but i'd keep the original in as its in good condition, and wouldnt mean i'd need to swap the pcb underneath either?
Or am I barking up the completely wrong tree so to speak?
Any help appreciated...especially for you Vario owners who have changed their housings...any problems you came across etc.
Cheers!
bump surely someone must have done this already?? all these reads, and no replies
SEARCH THE FORUMS BEFORE POSTING THREADS
kthxbye =p
i've already searched....n yeh it mentions swapping with an orange 3100 housing...but thats something i'd haveto find on ebay etc...doesnt mention the 8525 housing on cnn..... so was wondering if the keypad fits or not, as the front faceplate is scratched to hell so would need to swap the whole casing...not just the middle/rear panels.
Try this: http://cgi.ebay.co.uk/OEM-Housing-f...oryZ3728QQrdZ1QQssPageNameZWD1VQQcmdZViewItem
Cheers for the link Paul. That listing seems to claim that you can replace a vario with that housing, so might aswell just bite the bullet and go for it I'll probably look at getting it from CNN still, as they will work out slightly cheaper (~£32 compared to ~£45)
marcparker said:
replace a vario with that housing
Click to expand...
Click to collapse
Vario II to be more precise. The Vario is a HTC Wizard.
Any success with replacing? Is it hard to do? I have some scratches myself, and would like to change the housing. Have a TYTN
I havnt had chance to order the new housing yet, as i was skint until payday I'm going to hopefully get it ordered within the next couple of days.... I'll keep you posted on how it goes!
Still no one with experiences?
On this site there is a GPS antena available for TyTn... can we then enable GPS on the TyTn??
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
I've seen an HTC Hermes Case on this site:
http://www.cellphonepartszone.com/Products.asp?shopxpbe_id=64&id=281
but it's not completely clear to me on how to order and pay... (i'm Italian)
Hope this will be useful and you'll understand how to order the case...
Still no one with experiences on changing the housing?
Sei semplicemente un grande..la cover originale è impossibile da trovare!!
However no succesfully experience to swap the housing because in order to be able to change them (Cingular/HTC 8525 and also from Orange but i can't remember the name) with a TyTN, because the internal keypad membrane of the buttons at the top of the phone are (hope for now) impossible to find anywhere. I'm still looking for..
Churchill said:
On this site there is a GPS antena available for TyTn... can we then enable GPS on the TyTn??
http://cnn.cn/shop/8525tytnhermes-antenna-p-1615.html
Click to expand...
Click to collapse
I think enabling GPS is a little more complex than that - there were some required connections on the chipset that are not connected - try searching this forum...
Before post remember the topic of the thread: HOUSING
not gps
After I had changed the housing the screen doesn´t change into landscape mode
Hi!
After I had changed the housing the landscape mode isn´t activate itself while openning the keyboard. It did only once. It seems like the problem is of physical matter but I checket out all again and it seems to be all as it was. I don´t have another complains about functionality.
For those who wants to change the housing I have to say that that takes alot of time. And before you will waist money for a new housing make the following steps:
1. Look a this one verry carefully and be sure you have all tools you need.
ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
2. Think that you will need some stuff that you will put between new housing and touchscreen. (I took the old one but it isn´t a good idea).
3. You will need some glue to glue the old parts to the new housing (obviously the housing is more than just this plastic case).
If somone could give me an good advice related to the screenmode while opening I will aprecciate that.
ecor said:
Hi!
After I had changed the housing the landscape mode isn´t activate itself while openning the keyboard. It did only once. It seems like the problem is of physical matter but I checket out all again and it seems to be all as it was. I don´t have another complains about functionality.
For those who wants to change the housing I have to say that that takes alot of time. And before you will waist money for a new housing make the following steps:
1. Look a this one verry carefully and be sure you have all tools you need.
ftp://ftp.xda-developers.com/Wizard/Docs_Tutorials/Wizard_Service_Manual.pdf
2. Think that you will need some stuff that you will put between new housing and touchscreen. (I took the old one but it isn´t a good idea).
3. You will need some glue to glue the old parts to the new housing (obviously the housing is more than just this plastic case).
If somone could give me an good advice related to the screenmode while opening I will aprecciate that.
Click to expand...
Click to collapse
Your device does not rotate anymore because you have not moved the magnet from the old casing to the new one. The magnet operates the rotate switch. See here:
http://forum.xda-developers.com/showthread.php?p=2686388
Mike
Oh and you gave a link to the Wizard Manual, but you can get one for the Hermes here www.mikechannon.net
Anyone have any experience with this? I was thinking about trying it because the replacement housings for the HTC Wizard are crazy pricey IMO. heres a link
http://www.dummyphones.com/product_p/mda-tmobile.htm
I mainly need a new volume spring thing and the outer housing. Will this work? The site says no but i have a feeling they're dirty lairs.
Waiting for your impute peoplez!
capn out!
I recently bought a dummy 8125 with hopes of using its case as a replacement for mine. When I take the dummy phone apart, I will let you know if the volume key is a real functional key. My belief is it must be, but who knows. I only paid $6.00 US dollars so not big loss if I am wrong.
Jeff
awsome to hear that Jeff, ill be watchin this thread. Let me know if the case works too please.
Well I have good news and bad news. Here is what I did. I took my recently acquired HTC P4300 dummy phone (identical layout in every way to a 8125) and completely dismantled it. Of course there was no screen, motherboard, or working keyboard. What there was:
Complete outer housing
Complete inner housing & keyboard assembly
Buttons: Power, voice record, camera, all front keys (ie/inbox, talk/end, navigation, two softkeys)
The com manager/volume slider buttons are attached to the keyboard, they are functional keys. But you can not use the keyboard assembly as the keyboard is fake. You could pry them out and put them in your old keyboard assembly.
I disassembled both the dummy phone and my 8125. Swapped everything except the keyboard. The dummy phone camera cover does not have an antenna. So you carefully peel up the antenna and glue it down to the new dummy camera cover. The other modification is you peel up the keyboard keys and put them on the 8125 keyboard. (hard to explain) They keys are one big skin glued down.
Here are some pictures. ( I apparently can't hold the camera still)
http://tonyandjeff.spaces.live.com/...ntExpand=0&addCommentFocus=0&pauseSlideshow=0
The phone I bought:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=330195843696&ssPageName=STRK:MEWN:IT&ih=014
help!!!
jeffla said:
Well I have good news and bad news. Here is what I did. I took my recently acquired HTC P4300 dummy phone (identical layout in every way to a 8125) and completely dismantled it. Of course there was no screen, motherboard, or working keyboard. What there was:
Complete outer housing
Complete inner housing & keyboard assembly
Buttons: Power, voice record, camera, all front keys (ie/inbox, talk/end, navigation, two softkeys)
The com manager/volume slider buttons are attached to the keyboard, they are functional keys. But you can not use the keyboard assembly as the keyboard is fake. You could pry them out and put them in your old keyboard assembly.
I disassembled both the dummy phone and my 8125. Swapped everything except the keyboard. The dummy phone camera cover does not have an antenna. So you carefully peel up the antenna and glue it down to the new dummy camera cover. The other modification is you peel up the keyboard keys and put them on the 8125 keyboard. (hard to explain) They keys are one big skin glued down.
Here are some pictures. ( I apparently can't hold the camera still)
http://tonyandjeff.spaces.live.com/...ntExpand=0&addCommentFocus=0&pauseSlideshow=0
The phone I bought:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&rd=1&item=330195843696&ssPageName=STRK:MEWN:IT&ih=014
Click to expand...
Click to collapse
Hey Jeffla!!! i noticed you changed your HTC p4300/wizard casing for a another one, and i was hoping if you could tell me where i can buy a new/use full body housing for my wizard!!!!!!! i"ve been looking for an original all black housing but all i can come across is the silver housing and i don't want that!!!!! if you could help me out i would be in great debt to you!!!!!! THNX in advance!!!!!!
Heys guys, i was recently asking myself the same question. I posted it on Xperia subroum, but really no good answer came up. So i'm gonna ask here.
Would be possible to disassemble this dummy phone: http://cnn.cn/shop/sonyericsson-xperia-dummy-phone-p-6107.html
I would like the use the battery cover, front buttons and "maybe" faceplate.
Thanks in advance.
Nah, I have dismantled some of the dummies in order to obtain parts.
They really are different, almost nothing can be reused
EqX
On my tg01 my screen does not work on the right upper corner, about 20% of the screen size. If i bend the phone, dragging the corners upwards or downwards, the screen start to work as i should for a small period of time. I must bend it very often, I'm afraid to brake it.
Does anyone know how to safe open the tg01?
What type of screwdriver should I buy?
Is there any tutorial with pictures?
Can I fix by myself the digitizer or I must replace the whole LCD?
Any tested suggestion will be hardly appreciated! Thank you!
Our TG01 has 4 Triwing screwdrivers under the battery cover, i bought a full set of these (sizes 1 - 4) but found none of them to fit so before we can open it up we need to find a triwing screwdriver or bit that fits. I think the best bet is to try one of those nintendo ds or wii triwing screwdrivers to see if those fit, i've seen loads on ebay. Keep meaning to buy one myself to try. If you manage to get those triwings off im guessing you'll next need a torx set usually sizes 5 - 10 will do for phones but you may be better off getting a full set. As for guides / tutorials on dissasembling i had a look myself but couldnt find anything.
Best of luck to you and if you manage to find a triwing that fits please share with the rest of us ;-).
Orange service is the answer
my tg01 got a new imei. the problem was the mother board, not the digitizer. they changed it in orange service. now i test the device to see if it works ok. my old dragon was network free, this one is orange locked.