Related
I wanted to create my own splash screen so followed the instructions on the WIKI page. I had OLIs hard-SPL installed and thought that I didn't need to SuperCID first (clever huh?!). I flashed 1.01 MFG and everything was fine.
Tried to issue the "lnb" command and kept getting "command error". Finally realised that if I wasn't superCID (my CID is HTCST-MOB005¼ôàŠHTCE) I wasn't going to get far.
I decided to run Pof's CID unlocker to make me SuperCID thinking it would be okay as it used the 'soft' SPL. Oh Dear. The flash halted at step 0% flashed and now my Hermes won't get beyond the boot screen. I can't flash anything standard as I've got MFG installed and I can't flas a naked nb because I'm not SuperCID.
HELP! Please
So I can't
mmm... I guess you're stuck because you can't boot OS, right?... so, which radio bootloader version do u have? if it's 107 it's easy to fix
pof said:
mmm... I guess you're stuck because you can't boot OS, right?... so, which radio bootloader version do u have? if it's 107 it's easy to fix
Click to expand...
Click to collapse
Even, if he got bootloader 0108 it may be "easy" to fix with newer Oli's bootloader. no?
in mtty do:
set 14 0
task 8
does it boot wm again?
If so you can flash any sspl rom or somebody can point you to a sspl loader for bl1.01.oli & you can flash that to remove 1.01MFG. Sorry that I can't give you a link right here, but I'm mobile now & can't access cross-ref threads here easily.
Sleuth255 said:
in mtty do:
set 14 0
task 8
does it boot wm again?
If so you can flash any sspl rom or somebody can point you to a sspl loader for bl1.01.oli & you can flash that to remove 1.01MFG. Sorry that I can't give you a link right here, but I'm mobile now & can't access cross-ref threads here easily.
Click to expand...
Click to collapse
Star!!!!
Yup booted fine. Thanks a lot.
Hi there. I need help to create a modified RUU for Herlad.
I know it is the Hermes forum but the Herald is nearly the same device.
And some people bricked their devices by flashing.
Now it stuck in bootloader.
And even with CID-unlocked by imei.check i cannot update another rom with RUU = Vender ID error.
Please help us creating a modified RUU.
Thanks
contact olipro.
is not the RUU but the bootloader what you need to hack, and no, hermes and herald are not similar in that way.
pof said:
is not the RUU but the bootloader what you need to hack, and no, hermes and herald are not similar in that way.
Click to expand...
Click to collapse
Yes - by hermes the modified RUU shows the device a SuperCID while flashing. SO the bootloader can by passed with any ROM.
And yes they are not similar. But we need signed nbh for flashing and we need a modified RUU.
WIzard didn´t have signed NBH so I posted in this forum
papamopps said:
Yes - by hermes the modified RUU shows the device a SuperCID while flashing. SO the bootloader can by passed with any ROM.
Click to expand...
Click to collapse
Because "EnterBootloader.exe" has been replaced by SSPL, which is indeed a hacked bootloader.
papamopps said:
And yes they are not similar. But we need signed nbh for flashing and we need a modified RUU.
Click to expand...
Click to collapse
Again, is not the RUU what you need. Read the SSPL thread.
pof said:
Because "EnterBootloader.exe" has been replaced by SSPL, which is indeed a hacked bootloader.
Again, is not the RUU what you need. Read the SSPL thread.
Click to expand...
Click to collapse
OK. Thanks BUt can we use this SSPL for flashing Herald?????
Or is there a way to get one for Herald.
I contacted Olipro.
Thanks
papamopps said:
OK. Thanks BUt can we use this SSPL for flashing Herald?????
Or is there a way to get one for Herald.
Click to expand...
Click to collapse
It is hermes specific, contains an hermes IPL & SPL.
BTW, if I recall correctly you can use pdocwrite to flash cooked OS roms on herald.
pof said:
It is hermes specific, contains an hermes IPL & SPL.
BTW, if I recall correctly you can use pdocwrite to flash cooked OS roms on herald.
Click to expand...
Click to collapse
There is a way for flashing by Aserg. But only when activesync is available. But fter bricking the device it stuck in bootloader. And so - No activesync - no flash. Just with RUU it works. But the RUU only works for the special language ROM.
And there is for exapmle no german RUU. And I cannot flash.
Thanks for helping.
Think I have to wait until official update.
pof said:
It is hermes specific, contains an hermes IPL & SPL.
BTW, if I recall correctly you can use pdocwrite to flash cooked OS roms on herald.
Click to expand...
Click to collapse
can you write the SPL area perhaps?
Olipro said:
can you write the SPL area perhaps?
Click to expand...
Click to collapse
Sorry. DOn´t understand. What is the SPL area? WHere can I find an Info about?
Thanks
My Wizard keeps starting up in the boot (rainbow) screen,
it says:
IPL 2.21.0001
SPL 2.21
Is it bricked? If i connect the phone "USB" appears in the down left corner, but activesync doesn't seem to react.
What to do?
As is in bootloader , not bricked
so reflash with new rom but be sure it is cid unlocked
lmd0990 said:
As is in bootloader , not bricked
so reflash with new rom but be sure it is cid unlocked
Click to expand...
Click to collapse
I've tried to update with the official MDA ROM, but i get an 294 error, invalid Vendor ID, what should i do now?
U may try another roms
It seems that i can't upgrade it with any rom, which one should i use?
I tried 2 different Roms, the program does the update and tells me it was a succes, but at restart i get the same rainbow screen....
CIDlocked?
kubek1334 said:
CIDlocked?
Click to expand...
Click to collapse
I Think so, i'd never removed it....
Soo...
Nothing you can do.. [except imei-check]
Maybe try to load an official rom or Wizard Love
And read about G4 version.
I see that you tried to load an SPL rom
I think that you are lucky.
You only have HalfBricked Wizard )
kubek1334 said:
Soo...
Nothing you can do.. [except imei-check]
Maybe try to load an official rom or Wizard Love
And read about G4 version.
I see that you tried to load an SPL rom
I think that you are lucky.
You only have HalfBricked Wizard )
Click to expand...
Click to collapse
If i try to load the official ROM i get Error 294 [Invalid Vendor ID] and the love ROM won't install, get error 300...
try the mun's ruu. [Read topic about HardSPL]
Tried it to, no luck either.
try wizard service tool v 4.2.2 (WST) , get it from wizard forum ,,,,,, good luck
lmd0990 said:
try wizard service tool v 4.2.2 (WST) , get it from wizard forum ,,,,,, good luck
Click to expand...
Click to collapse
downloaded it, but WST doesn't find my Wizard...big paperweight
Use another update tool... Search for: ROMUpdateUtility_Wizard_NoID.exe
yes download RomUpdateUtility_Wizard_NoID , then put .nbf rom file in folder
i think it will solve it ,,,,,,,,,,,,,, good luck
lmd0990 said:
yes download RomUpdateUtility_Wizard_NoID , then put .nbf rom file in folder
i think it will solve it ,,,,,,,,,,,,,, good luck
Click to expand...
Click to collapse
Tried above, but no luck. Now stands "RUU" in the upper right corner, what's up with that?
is there also USB in lower left conrner???
lmd0990 said:
is there also USB in lower left conrner???
Click to expand...
Click to collapse
Yes it is,
it has broken SPL (2.21 - its G3 not G4)
Cidlocked.
Only what's left is imei-check
Hi, I have been running Gollum's Prophet Touch VII on my M600 for ages now and fancied a change, I decided to dl varanusvincent's 'my diamind edition 2' and ran the g4 rom update that came with it, my m600 now is sat in the 3 colour bootloader screen with IPL 2.10.0001 and SPL 2.20.0001 and I cant get it to do anything, hard reset just puts it back to the bootloader screen, can ANYONE help me please or have I wrecked it by trying to install a new rom?
thanks
Mike
I've reset it again and it is now stuck on the 'qtek keep the world as one' screen with ipl and spl in the top left corners, the uodate programmes all say that is disconnected if i try and use them any ideas??
have you read how to upgrade it????
You haven't HARDSPL.
READ HERE to recovery your Prophet
I have already read over that entire post before I put this on, didnt want to look an idiot - no luck there then!
I have tried to use the hard spl folder upgrade and it still only gives me the 3 colours bootscreen after a hard reset, step 2 says use bootloader mode and flash pvtemp but I've looked everywhere for pvtemp and cant find it to dl
82mike said:
I have already read over that entire post before I put this on, didnt want to look an idiot - no luck there then!
I have tried to use the hard spl folder upgrade and it still only gives me the 3 colours bootscreen after a hard reset, step 2 says use bootloader mode and flash pvtemp but I've looked everywhere for pvtemp and cant find it to dl
Click to expand...
Click to collapse
with SPL information that you said. It said, that your Device is not HARDSPL already.
You have to succesfully HARDSPL your Device first.
And after that you wont face anyproblem again.
Download :
PDVIET Temp
Is your Device CID Lock?
So I dl PDAViet, flash with that, run HARDSPL with my new .nbf in that file and I should be ok? No idea about CID lock, thanks for helping
82mike said:
So I dl PDAViet, flash with that, run HARDSPL with my new .nbf in that file and I should be ok? No idea about CID lock, thanks for helping
Click to expand...
Click to collapse
So you have to Flash your ROM now with PDA Viet Temp first. This will bring your device to WM5 No Vendor.
You have to flash it through bootloader mode, since your device now stuck up.
After that , HARDSPL your Device.
Read better thread from animelover. Here
If your Device is a G3, SPL Information will be changed into 2.G3.4PDA or for a G4 is 2.G4.4PDA
And after your Device HARDSPL ready. Run the Upgrade tool from My ROM. So you wont stuck up again.
It should run.
thats great, im running pdaviet now, read the page about hardspl too so i'll install this, turn on my m600 and run hardspl g4 followed by your rom - thanks!!
82mike said:
thats great, im running pdaviet now, read the page about hardspl too so i'll install this, turn on my m600 and run hardspl g4 followed by your rom - thanks!!
Click to expand...
Click to collapse
I will update the ROM. A small registry failure. Not so important actually.
Just wait .
I am uploading this ROM now.
You can Hardspl your Device first anyway.
Done!!! Hard SPL'd now says 2.g4.4pda on booting! I'll hang on for the new rom to be uploaded, if i want to change roms again to I have to run pda viet or now that I have run hardspl can I just install over the top? sorry for all the q's and thanks for all your help
82mike said:
Done!!! Hard SPL'd now says 2.g4.4pda on booting! I'll hang on for the new rom to be uploaded, if i want to change roms again to I have to run pda viet or now that I have run hardspl can I just install over the top? sorry for all the q's and thanks for all your help
Click to expand...
Click to collapse
If you have HARDSPL.
And Your SPL Information changed into 2G4.4PDA .
No need to install PDAViet again.
Just run the installer from the cooker.
Ok so I just got my new device and I tried to update the bootloader from 1.04 to 2.47 with the new SPL with the .exe file form here. It restarted to flash and it froze. What do I do? I can't boot it to the OS and I can't update the bootloader. Please Hlep ASAP. I am stuck with SPL-104 and windows 6
Thanks.
if you can't get out of bootloader you may have to flash a stock non gps rom.
I am jsut flashing the bootloader. It had the original stock ROM on it.
lafester said:
if you can't get out of bootloader you may have to flash a stock non gps rom.
Click to expand...
Click to collapse
lafe is right.....flash a stock non-gps rom.......when you tried flashing the Nuespl 2.47 you did do it via SD card correct?
yes I did. I flashed it on a Non GPS stock VZW ROM
JukEboXAuDiO said:
yes I did. I flashed it on a Non GPS stock VZW ROM
Click to expand...
Click to collapse
try flashing another stock non gps rom and then try to upgrade the BL again....this time try Olipro 2.4.....somehow the BL didnt flash correctly the only way out is to flash the stock non-gps rom and the proceed...
I am using OliPro 2.4 from the DCD ROM thread. Is that the wrong one? Its stuck ont he loading screen
JukEboXAuDiO said:
I am using OliPro 2.4 from the DCD ROM thread. Is that the wrong one? Its stuck ont he loading screen
Click to expand...
Click to collapse
No....but above you posted 2.47.....you could try Nuespl 2.47 it is the latest and greatest...go over to PPCgeeks and grab it off my sig over there....it runs fom the SDcard....also what have you tried to get it back?.....if you have not already try a hard reset first.....
Here I will save you some time
http://forum.ppcgeeks.com/showthread.php?t=30561&highlight=hardspl+2.47
yes I have tried hard reset. It keeps going to hte bootloader. Ok i used Olipro 2.40 using hte cmd prompt and did what it told me to. When it restarted it got stuck on the updating page. Now its just stuck onthe loading page.
JukEboXAuDiO said:
yes I have tried hard reset. It keeps going to hte bootloader. Ok i used Olipro 2.40 using hte cmd prompt and did what it told me to. When it restarted it got stuck on the updating page. Now its just stuck onthe loading page.
Click to expand...
Click to collapse
Can you enter BL?
Yes. It loads to bootloader 1.04 and then goes to update from the SD Card and its stuck on the loading screen
JukEboXAuDiO said:
Yes. It loads to bootloader 1.04 and then goes to update from the SD Card and its stuck on the loading screen
Click to expand...
Click to collapse
ok let me make sure I understand.....you are in BL? which are trying to Un-lock with Olipro 2.4 or nuespl 2.47?
I am truing to unlock Olipro 2.4
I am a little confused also. Its been awhile since I flashed olipro 2.4... Aren't you supposed to pull usb at some point during the install?
you have to follow ALL of the instructions for the flash to work.
Nuespl 2.47 is much easier to use. I would still recommend reflashing the stock rom so you can put nuespl on your sd (providing it is 2gb or less).
if you are in bootloader you can just run the ruu and it will flash.
JukEboXAuDiO said:
I am truing to unlock Olipro 2.4
Click to expand...
Click to collapse
and you are trying to un-lock with Olipro 2.4 via sd.....if that is so then that is the problem....
flyers2114 said:
and you are trying to un-lock with Olipro 2.4 via sd.....if that is so then that is the problem....
Click to expand...
Click to collapse
Its stuck on the loading screen.
Can someone tell me where I can get the dman nbh file so I can re flash it back to what it should be so I can start over? All I have is a damn phone with no OS and bootloader 1.04.
JukEboXAuDiO said:
Can someone tell me where I can get the dman nbh file so I can re flash it back to what it should be so I can start over? All I have is a damn phone with no OS and bootloader 1.04.
Click to expand...
Click to collapse
1.04 is verizon's stock bootloader. Do these steps with an SD card. You can try using Verizon's stock OS/Radio... but it never works for me the first time.
1) Download the Sprint latest Rom Update. Right click the EXE file and extract the files.
2) Copy and rename Ruu_signed.nbh to TITAIMG.nbh on the storage card.
3) Put the card into the phone...Power+Camera+Reset. This will get into bootloader, and load the image.
When complete.... soft-reset.
DO NOT LET CUSTOMIZATIONS RUN!!!
When you get to the WM 6.1 screen and it asks for you to touch screen... DO NOTHING!!!
Remove SD card.
Connect your USB cable... get activesync to see it... Just tell it to cancel the syncronization.... Then run Olipro's Titan Unlocker 2.4.
When it's done getting 2.4 on it.... Copy the radio rom you want IE 3.42.50 to the SD card and flash away. Then the same for the new OS.
Thank you so much dude. I am gonna get this thing moving today. Thanks again!
JukEboXAuDiO said:
Thank you so much dude. I am gonna get this thing moving today. Thanks again!
Click to expand...
Click to collapse
No problem. It does get tricky, but once you get the hang of the concepts.... flashing back and forth is easy.