Related
What I have now:
OS: Black 2.0 Cingular edition
Boot Loader: 1.01
Radio BL: 108
Radio: 1.38.10
what I want:
OS: WM 5 from the 1.34 cingular release
Boot Loader: Loader from the 1.34 cingular release
Radio BL: AFAIK you can't downgrade these so staying at 108
Radio: 1.16.00.00
How I plan to get there:
take the .nbh form the 1.34 cingular package and use RUU to flash the device.
Questions and concersion:
I'm looking for input on possible incompatabilities and hang-ups with varios BL versions and what not.
comments / feedback on my plan would be greatly appreciated and I will build a monument in your name if you help .
This has been covered before...
But, since you're well on your way to brick-ville, I'll buy your phone off you for, say, $100? It'll be worth less after you brick it...
Read up on the W*I*K*I and Oli's 1.40.Olipro bootloader before you do something dumb.
I did read it.
And thats the plan I came up with.
I was looking more for a confirmation.
The wiki has a ton of great info but its laid out reall crappy and not very cohesive. So I figured I'd post what I've came up with after reading it to see if I missed something. And from there maybe get more specific input on where the issues/dependencies are..... or maybe not.
spicer said:
I did read it.
And thats the plan I came up with.
I was looking more for a confirmation.
The wiki has a ton of great info but its laid out reall crappy and not very cohesive. So I figured I'd post what I've came up with after reading it to see if I missed something. And from there maybe get more specific input on where the issues/dependencies are..... or maybe not.
Click to expand...
Click to collapse
From your plan it is obvious that, even IF you read the wiki, you didn't understand it. Re-read the THREADS about 1.40 SPL and also search for MRVANX and read his TUTORIALS...
---New plan
What I have now:
OS: Black 2.0 Cingular edition
Boot Loader: 1.01
Radio BL: 108
Radio: 1.38.10
what I want:
OS: WM 5 from the 1.34 cingular release
Boot Loader: Loader from the 1.34 cingular release
Radio BL: AFAIK you can't downgrade these so staying at 108
Radio: 1.16.00.00
How I plan to get there:
Flash to hardSPL-v6
Fash Radio to 1.16
flash OS i get out of the 1.134 package. (the os.nb file i believe it is named)
last flash the boot loader.
Questions and concersion:
I'm looking for input on possible incompatabilities and hang-ups with varios BL versions and what not.
comments / feedback on my plan would be greatly appreciated and I will build a monument in your name if you help .
LegolasTheElf said:
From your plan it is obvious that, even IF you read the wiki, you didn't understand it. Re-read the THREADS about 1.40 SPL and also search for MRVANX and read his TUTORIALS...
Click to expand...
Click to collapse
I really appreciate the feedback. At least you're letting me know my plan wont work. Which will prevent me from trying it. But it would be kick ass if you could be more specific about what in the wiki i missed like :
-you can't flash the entire .nbh file cause it will try to replace your boot load and break it.
or
- Re-read the THREADS about 1.40 SPL because *something useful here*
Either way I'm still thankful cause I know my plan is a **** sandwich.
Very good.. You're getting there! It's nice to see someone read some directions..
You have it mostly right.. Flash the HardSPLv6 first. Then, grab the .nbh from the cingular rom and combine it with CustomRUU. Choose 'Autodetect' (we're looking for a hard-spl flash)..
Then, once that's done, you'll have the right radio, OS, splash, etc.. The only thing left would be to down-grade the bootloader, which I would advise against.. But, you can do it.. There is a seperate thread on HOW to do that, as it isn't just a one-step process.. Search and ye shall find.
Thank MAn!!! That kicks ass.
I need to send my phone back because the radio dies every 5 mintes.
So I want to get it as close to factory as possible.
So after I downgrade the BL i won't be doing anymore flashing to that phone.
Sometimes when I soft reset the phone is says "No GSM" even when sim is there. Soft reset it again and the radio is detected.
Very irritating.
Check out:
http://www.mrvanx.org/hermes_guide/
Flash HardSPL-1.40
Create NBH containing your provider's 2xSplashScreen + ExtROM + OS & flash it
Flash 1.16 radio
Flash-HardSPL-1.10
Flash your original IPL & SPL versions.
F-ya! That last part about down grading the BL is the part I was having trouble pinning down.
One last question:
Can I use the cingular NBH or will it try to flash the RBL and crash because you can't down grade the RBL
the the new mrvanx page is dope. found the donwgrade guide.
Bricked using this method
pof said:
Flash HardSPL-1.40
Create NBH containing your provider's 2xSplashScreen + ExtROM + OS & flash it
Flash 1.16 radio
Flash-HardSPL-1.10
Flash your original IPL & SPL versions.
Click to expand...
Click to collapse
Pof,
I did it this way but after flashing the radio rom I get no GSM and then I'm stuck in the Windows Mobile Screen.
I have looked in the Wiki but how can I actually unbrick?
My SPL is still 1.40 Oli. But I can't get activesync to work.
Should I flash the new radio via SD card or any other way (mtty?)
I would be very gratefull for any help,
Cheers,
HJ
P.S. Found a solution; http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#problem5
I will try to do this trick.
Thanks
@hellejoep: Try flashing your latest working radio again in NBH format.
pof said:
@hellejoep: Try flashing your latest working radio again in NBH format.
Click to expand...
Click to collapse
Pof,
One question, Can I upgrade radio rom via mtty?
Or otherwise?
Cheers,
HJ
P.S. How can I Flash any radio in NBH format? While stuck in bootloader?
hellejoep said:
Can I upgrade radio rom via mtty?
Click to expand...
Click to collapse
no
hellejoep said:
How can I Flash any radio in NBH format? While stuck in bootloader?
Click to expand...
Click to collapse
Disable activesync, and use CustomRUU.
pof said:
Disable activesync, and use CustomRUU.
Click to expand...
Click to collapse
Done that but then I get a Error 260.....
Any suggestions?
Or is there a way to bypass this? I have IPL 1.01 and SPL 1.40 Olipro.
I now got a Connection Error 264 but the bootloader gives usb and I can reach the hermes bij MTTY.exe.....
What is going wrong?
@hellejoep: close all programs including mtty before u run ruuwraper. Make sure you're using the latest version (v4.2) and activesync is not enabled.
pof said:
@hellejoep: close all programs including mtty before u run ruuwraper. Make sure you're using the latest version (v4.2) and activesync is not enabled.
Click to expand...
Click to collapse
It worked, cheers!!!!!
LegolasTheElf said:
Very good.. You're getting there! It's nice to see someone read some directions..
You have it mostly right.. Flash the HardSPLv6 first. Then, grab the .nbh from the cingular rom and combine it with CustomRUU. Choose 'Autodetect' (we're looking for a hard-spl flash)..
Then, once that's done, you'll have the right radio, OS, splash, etc.. The only thing left would be to down-grade the bootloader, which I would advise against.. But, you can do it.. There is a seperate thread on HOW to do that, as it isn't just a one-step process.. Search and ye shall find.
Click to expand...
Click to collapse
@LegolasTheElf,
This was great example on how to get people to read the wiki. I like your approach and I will try to use it in the future.
hi, i just got the XV6800 from verizon today because my Moto Q9m died after only 7 months. so they gave me this for it. now after reading the forum and many other sites and tutorials. i am ready to flash my phone. is this the easiest "[Tutorial] Verizon xv6800 Custom ROM Flashing" to follow? i read it and it didn't seem that bad. just wanted to know and make sure if the names of the files he speaks of are the most recent one's. and i take it i should back up my factory setting file off the phone before i attempt to do this. a few of my friends at work has this phone and i liked the fact they have it doing somethings the iphone does. like you can scroll through contacts by just sliding your finger and all. i would like to do this stuff as well. is that all then included in the flash or must i install other apps.
Phone has
Software Version: 2.09.605.8 (ROM version)
Firmware Version: 1.30.60 (radio version)
please help, really appreciate it
thanks
His guide is pretty good. Everything is up to date except for the SPL. I would recommend using the latest bootloader put out by No2Chem - version 2.47, but that's my only change from his guide. It installs via an SD card only, whereas his guide uses the computer to get Olipro's 2.4. You should be able to find a guide to using SD cards to flash as well as links to 2.47 throughout this forum and ppcgeeks.
Or you can certainly follow his guide as written and you'll be just fine.
Ivan
Keep in mind that using No2chems SPL you cannot go back to stock Verizon radio and ROM..... So if your phone breaks, you have to bring it in as is and chance they don't notice the difference.....
ok on the fact that once you go new flash you can't go back to factory. so before i do this i should back up my contacts. since the phone is new i don't have anything else on it. is there anything else i should back up either? so after its flashed then how do i get the programs on to scroll by just sliding? is that stuff that can be put on with out flashing this. but from what i read on here flash makes the phone run much better anyway
azclown said:
Keep in mind that using No2chems SPL you cannot go back to stock Verizon radio and ROM..... So if your phone breaks, you have to bring it in as is and chance they don't notice the difference.....
Click to expand...
Click to collapse
You can flash the old bootloader back on the phone after upgrading to 2.47 though then go back to the original ROM and radio, you just cant flash provider ROM from 2.47 just like you cannot from 2.40.
Am I missing something about what you are saying?
so i can flash to newer rom and be able to go back.. now i'm confused
if you i install themes must it be a new roM
serfboreds said:
You can flash the old bootloader back on the phone after upgrading to 2.47 though then go back to the original ROM and radio, you just cant flash provider ROM from 2.47 just like you cannot from 2.40.
Am I missing something about what you are saying?
Click to expand...
Click to collapse
I'm pretty sure he's simply saying: if you use No2Chem's 2.47, you can't directly flash back to Verizon's stock firmware, but if you flash back to the old bootloader (factory bootloader), you can.
and LilSnoop40, as far as I know, all of those files are the most up-to-date that I could find. I may update the guide because I am noticing (from other people's experience) that after the 3.42.02 firmware (which I flashed to, not 3.42.30), that you need to use a Low-density MicroSD (not MicroSDHC) card to flash on the new radios.
If you need help with any of this in more detail, feel free to contact me.
serfboreds said:
You can flash the old bootloader back on the phone after upgrading to 2.47 though then go back to the original ROM and radio, you just cant flash provider ROM from 2.47 just like you cannot from 2.40.
Am I missing something about what you are saying?
Click to expand...
Click to collapse
serfs - As I understand it, once you flash to No2chems SPL, you cannot go back to a non GPS rom. I asked this in his thread and it was confirmed. Now, they didn't say whether you could flash Olli Pro and then use his re-locker and then flash the stock ROM.... Look at this post....
http://forum.ppcgeeks.com/showthread.php?t=30561&page=4
Anyone please confirm I am thinking right?
Here’s what I did:
1.From T-mobile.cz I got the factory Czech T-Mobile Rom (*.exe)
2. I extracted the *.exe with WinRar and got a bunch of files.
3. I took out RUU_Signed and extracted it with NBHtool and got 4 *.NB files:
769.nb
PrimarySplash.nb
SPL.nb
Windows.nb
4. In the meanwhile I extracted my original reconstructed Dutch T-Mobile RUU_Signed.nbh (confirmed working) and took the Windows.nb
5. From the Czech *.nb files I deleted the windows.nb and replaced it with my Dutch windows.nb
6. With htcRIE 0.5.0.12 I put the three Czech NB’s:769.nb (suppose radio), PrimarySplash.nb and SPL.nb together with The Dutch windows.nb together in New RUU_signed.nbh.
7. I put the newly created RUU_Signed back into the folder with files from step 2.
8. Using Winrar I stuffed ala these files together in an *.sfx file that has an instruction saying that after extracting the sfx it should start RomUpdateUtility.
9. So far so good! I clicked the sfx and it would nicely extract and start the Czech RomUpdateUtility. The utility being Czech is no problem as I/we have been using it probably a sillion times and don’t read it.
10. Now I don’t have the guts to test it on my Dutch MDA Vario IV JJ but want to know wether this would work in case of RMA.
I remember that the Dutch factory ROM-upgrade for T-Mobile Vario III (Kaiser) would restore everything: SPL, Splash etc) By doing the above I somehow think I have re-created sort of a Dutch “factory” ROM upgrade that will restore everything back to stock.
Suppose this works, will I be able to go back to Hard SPL a second time? (heard some rumors...)
I want you guys to know that I don’t have any education in ICT but consider myself smart enough to figure things like this out . However… I am not too sure about what I have created.
Thnx. For any kind of feedback.
Am willing to upload this for people who want to try.
Free Rapidshare (10 downloads) if needed I will put it in my FTP.
Was it not in The raphael original shipped ROM wiki?
Also if it would help, I think I still have the files backed up at home somewhere. If you want I could look for it.
haaibaa2 said:
Was it not in The raphael original shipped ROM wiki?
Click to expand...
Click to collapse
It was but when reading the thread that goes with it I get serious doubts about that one working well
I have them backed up as well but I never dumped the splash, radio and more important the SPL. and everyone is talking about SPL's lately but no one can answer me wether one of the offered solutions is a working one.
So I was thinking to sort of creating a oneclick solution for whenever a RMA occures to me again
Was this a dumb question?
Dust2Dust said:
Was this a dumb question?
Click to expand...
Click to collapse
If you were able to download a factory ROM directly from your Carrier's website, then it would include everything you need to return your device to stock.
Then, all you would have to do is follow the instructions in the Hard-SPL thread to install the stock SPL (if you've flashed Hard-SPL), and then re-flash the factory ROM you downloaded to restore the original SPL.
Captain_Throwback said:
If you were able to download a factory ROM directly from your Carrier's website, then it would include everything you need to return your device to stock.
Then, all you would have to do is follow the instructions in the Hard-SPL thread to install the stock SPL (if you've flashed Hard-SPL), and then re-flash the factory ROM you downloaded to restore the original SPL.
Click to expand...
Click to collapse
There is no Dutch T-Mobile factoryrom.. that is the first thing I checked of course even before I had my first Vario IV at home.
And I still think somehow to remember that flashing the stock T-Mobile to my old Kaiser did flash the stock SPL as well... however I am starting to have doubts now..
Besides I haven't found anyone yet confirming that the Stock T-Mobile SPL from the Stock SPL thread actually works...
And the thingy I created should flash back stock radio and splash.. would you know of any safe way to test this Captain_Throwback??
Dust2Dust said:
There is no Dutch T-Mobile factoryrom.. that is the first thing I checked of course even before I had my first Vario IV at home.
And I still think somehow to remember that flashing the stock T-Mobile to my old Kaiser did flash the stock SPL as well... however I am starting to have doubts now..
Besides I haven't found anyone yet confirming that the Stock T-Mobile SPL from the Stock SPL thread actually works...
And the thingy I created should flash back stock radio and splash.. would you know of any safe way to test this Captain_Throwback??
Click to expand...
Click to collapse
I don't know of any "safe" way, no. I have no confidence that the Stock SPL from the stock SPL thread will work, either - that's why I had that thread closed. After you flash the stock SPL from the Hard-SPL thread, you risk bricking your phone if you try flashing a created ROM to it (even if it is created from parts of stock ROMs).
If you have a stock SPL on the phone, its possible that the extracted SPLs from that thread will actually work; but I'm already on my second phone, so I'm not willing to risk trying it.
Captain_Throwback said:
If you have a stock SPL on the phone, its possible that the extracted SPLs from that thread will actually work; but I'm already on my second phone, so I'm not willing to risk trying it.
Click to expand...
Click to collapse
That's my issue since tuesday I am dealing with my second raph as well the other one was only a couple of weeks old. The mobo burned and they were not able yet to recover anything. But I have set my goals on a working recoverymethod.
Too bad you had your thread closed as it was going somewhere good. and people not reading or trying unconfirmed things take their own risks as this is a development area.
Would you reconsider asking NATF to reopen it and change the topicname?
Dust2Dust said:
That's my issue since tuesday I am dealing with my second raph as well the other one was only a couple of weeks old. The mobo burned and they were not able yet to recover anything. But I have set my goals on a working recoverymethod.
Too bad you had your thread closed as it was going somewhere good. and people not reading or trying unconfirmed things take their own risks as this is a development area.
Would you reconsider asking NATF to reopen it and change the topicname?
Click to expand...
Click to collapse
Well, I think any future conversation on the whole "flashing back to stock" can be carried on in JZ SmartMort's thread with the instructions on how to do that. He also explains in there why none of the SPLs that I extracted will ever overwrite Hard-SPL. Unless Olipro or cmonex enlighten us on how they were able to modify that 1.90 SPL to overwrite the Hard-SPL, that's the only one that'll ever work.
I did see you posted in that thread, but I think if you really NEED a different SPL than one that's in an existing stock ROM, that if you PM Olipro or cmonex, one of them may be able to help you.
Dust2Dust said:
There is no Dutch T-Mobile factoryrom.. that is the first thing I checked of course even before I had my first Vario IV at home.
And I still think somehow to remember that flashing the stock T-Mobile to my old Kaiser did flash the stock SPL as well... however I am starting to have doubts now..
Besides I haven't found anyone yet confirming that the Stock T-Mobile SPL from the Stock SPL thread actually works...
And the thingy I created should flash back stock radio and splash.. would you know of any safe way to test this Captain_Throwback??
Click to expand...
Click to collapse
http://www.t-mobile.nl/persoonlijk/...are-updates/mda/mda-compact-iv-winupdate.aspx ???
I thought this includes a complete WM6.1 package.
gdekeijzer said:
http://www.t-mobile.nl/persoonlijk/...are-updates/mda/mda-compact-iv-winupdate.aspx ???
I thought this includes a complete WM6.1 package.
Click to expand...
Click to collapse
It does but it's for MDA Compact IV, aka Touch Diamond... but still am going to look what's inside
edit: cewl it had the splash I wanted inside.
Had the guts to flash...
...and it works. Exept from SPL...
Next step will be flashing this after OLi en cmonex' only for warranty SPL 1.90..
Just wonder wether I will be able to flash back to Hard SPL after this....
Anuone has an idea??
Dust2Dust said:
...and it works. Exept from SPL...
Next step will be flashing this after OLi en cmonex' only for warranty SPL 1.90..
Just wonder wether I will be able to flash back to Hard SPL after this....
Anuone has an idea??
Click to expand...
Click to collapse
If you're able to successfully flash your Franken-ROM w/stock SPL to your phone after flashing the 1.90 warranty SPL, your phone still works, and you can connect to a computer using Activesync or Mobile Device Center, there's no reason you shouldn't be able to re-flash Hard-SPL onto your device. The key words in that sentence are "if" and "successfully" . . .
Captain_Throwback said:
The key words in that sentence are "if" and "successfully" . . .
Click to expand...
Click to collapse
Yep...
those are the keywords
Due to display flickering issue which is worse and worse from day to day. I decided to restore stock rom for my T-Mobile MDA Vario IV to make a complain.
My device is Security Unlocked, with different Radio and ROM so i would like to know if my steps for reverting is ok. I do not want to make my device bricked!!
I have EXE file with ROM from T-Mobile www which includes all like SPL, RADIO, ROM etc.
So my conclusion what i have read is that i have to:
1) restore stock Radio
2) remove security lock
3) remove Hard-SPL
4) flash stock ROM from EXE file i have already downloaded. It will overwrite 1.90 SPL to 1.69 which was my default and overwrite ROM too.
Can anyone experienced with this stuff tell me if i am right? thank a lot.
With the steps you have listed you will be good to go. Just follow your steps and you are good.
tvaril said:
Due to display flickering issue which is worse and worse from day to day. I decided to restore stock rom for my T-Mobile MDA Vario IV to make a complain.
My device is Security Unlocked, with different Radio and ROM so i would like to know if my steps for reverting is ok. I do not want to make my device bricked!!
I have EXE file with ROM from T-Mobile www which includes all like SPL, RADIO, ROM etc.
So my conclusion what i have read is that i have to:
1) restore stock Radio
2) remove security lock
3) remove Hard-SPL
4) flash stock ROM from EXE file i have already downloaded. It will overwrite 1.90 SPL to 1.69 which was my default and overwrite ROM too.
Can anyone experienced with this stuff tell me if i am right? thank a lot.
Click to expand...
Click to collapse
Noo i think this is wrong. Flash the stock rom first, then the stock radio, and lastly the stock SPL.....
Jdilla said:
Noo i think this is wrong. Flash the stock rom first, then the stock radio, and lastly the stock SPL.....
Click to expand...
Click to collapse
the last thing you flash should be the spl
read this before doing anything
http://forum.xda-developers.com/showthread.php?t=410150
Noo i think this is wrong. Flash the stock rom first, then the stock radio, and lastly the stock SPL.....
Click to expand...
Click to collapse
the last thing you flash should be the spl
read this before doing anything
http://forum.xda-developers.com/showthread.php?t=410150
Click to expand...
Click to collapse
I am not a noob i have read this many times, so i know what is the "official" routine. But this (official) routine was, i think made, for people who had no choice (as me with original exe) and they had to dump their ROM first, and than reconstruct part by part. And because the dumped ROM will never be CID safe, they had this tutorial 1. Radio, 2. OS, 3. SPL and it rally does make sense for me.
But i am lucky, because my operator (T-Mobile) shipped the device with EXE, which contains all the stuff (Radio, SPL, OS, RUU) and it is directly for my CID. So that is why i think my tutorial in the first post will work. And i think it should work though if i only remove Security unlock and Hard-SPL. Because it will overwrite all partitions in device even restored Radio, OS etc.
So am i right ?
your right and to save you step dont worry bout radio removal since its in the stock rom pack like u said just load the 1.90 for warrenty in the hard spl thread and relock your phone as an extra precation(some carriers care some dont) the run the exe and ure golden
ps. PimBackup is your friend (just in case u forgot)
m0nkeyf00t said:
your right and to save you step dont worry bout radio removal since its in the stock rom pack like u said just load the 1.90 for warrenty in the hard spl thread and relock your phone as an extra precation(some carriers care some dont) the run the exe and ure golden
ps. PimBackup is your friend (just in case u forgot)
Click to expand...
Click to collapse
Maybe SPB Backup is my better friend than PIM Backup. But i always use both and Microsoft My Phone too Thanks
tvaril said:
I am not a noob i have read this many times, so i know what is the "official" routine. But this (official) routine was, i think made, for people who had no choice (as me with original exe) and they had to dump their ROM first, and than reconstruct part by part. And because the dumped ROM will never be CID safe, they had this tutorial 1. Radio, 2. OS, 3. SPL and it rally does make sense for me.
But i am lucky, because my operator (T-Mobile) shipped the device with EXE, which contains all the stuff (Radio, SPL, OS, RUU) and it is directly for my CID. So that is why i think my tutorial in the first post will work. And i think it should work though if i only remove Security unlock and Hard-SPL. Because it will overwrite all partitions in device even restored Radio, OS etc.
So am i right ?
Click to expand...
Click to collapse
Dear not a noob,
You asked a question, and you were given the "official" routine. If you knew the "official" routine, and you were going to do it your way anyway, it kinda makes your question unnecessary. I remind you that you are not the only person who reads these forums. In fact more than a hundred have read this thread. Some of these people "noobs" or not may want to know the "official" routine.
I personally don't care what you do or where you put your phone. But if anyone reading this thread follows the official routine they will not have any problems.
I understand why people don't like answering questions in these forums. No good deed etc etc......
Ray
rayrayinfla said:
Dear not a noob,
You asked a question, and you were given the "official" routine. If you knew the "official" routine, and you were going to do it your way anyway, it kinda makes your question unnecessary. I remind you that you are not the only person who reads these forums. In fact more than a hundred have read this thread. Some of these people "noobs" or not may want to know the "official" routine.
I personally don't care what you do or where you put your phone. But if anyone reading this thread follows the official routine they will not have any problems.
I understand why people don't like answering questions in these forums. No good deed etc etc......
Ray
Click to expand...
Click to collapse
Dear Ray,
you did not understand my question. That is all that i can say about it. I know about official routine to restoring stock defaults, but i was asking if my routine could lead me to same result. Because as from what i have learned in this forum this routine should lead me to the same result more easier way because i have RUU with stock ROM direct for my CID.
Your way i have to first extract nbh image from exe. Second i have to extract each nb from nbh. Third i have to make nbh from each nb, radio is not necessary, because it is already here. And for fourth my SPL is 1.69.0000 which is different from SPL contained in the Hard-SPL removing pack and it does not work for me just to replace the SPLs. And until now i did not find out why. Someone few months ago told me that i can use the SPL from Hard-SPL removing pack (1.90.0000 i think) and then overwrite it with my stock ROM package, which will restore my stock SPL and Radio, OS again as well. So official routine works for those who had to dump their ROM to backup their stock ROM, those who were not as lucky as me to have stock ROM with RUU for their CID. This procedure, i personaly think is OK, is not covered here on the forum, and that is why i was aking for blessing from someone more involved in this problmes...is it ok now?
PS: anything i can flash after removing Security Lock and Hard-SPL is my stock ROM and that is what i have. So it should work if there are not some any other things which i have missed somewhere!
Tom
bah dont worry bout them crackheads say i can speak from experience that your way work since thats exactly what i did last week only att exe pack and it did overite the 1.90 stock spl,changed to 1.95 in my case,like u say along with the radio and os. only diferance is i never security unlocked my phone sincei was happy with the raphel radios . now im happy with my new(well refurblished ) fuze.
p.s. i had defective screen too incase you were wondering
Everybody play nice
Ok, that being said, since you have the "official" exe from your Carrier, all you really have to do is:
Run the .exe from your Carrier - this will replace the stock Radio, ROM, and boot splash.
Install the warranty stock SPL 1.90 from the Hard-SPL thread (using the Hard-SPL RUU, of course).
Re-run the .exe from your Carrier, which will overwrite the 1.90 SPL with the stock version.
Other methods will likely work too, but IMHO, that's the easiest .
Captain_Throwback said:
Ok, that being said, since you have the "official" exe from your Carrier, all you really have to do is:
Run the .exe from your Carrier - this will replace the stock Radio, ROM, and boot splash.
Install the warranty stock SPL 1.90 from the Hard-SPL thread (using the Hard-SPL RUU, of course).
Re-run the .exe from your Carrier, which will overwrite the 1.90 SPL with the stock version.
Other methods will likely work too, but IMHO, that's the easiest .
Click to expand...
Click to collapse
Are you sure that running EXE for the first time, before removing Hard-SPL, will not corupt the device ?
tvaril said:
Are you sure that running EXE for the first time, before removing Hard-SPL, will not corupt the device ?
Click to expand...
Click to collapse
Positive. That's actually how I used to "flash to stock" in between custom ROM flashes.
The flashing can now begin (without fear of not being able to return it to stock form)! And for those who need a way to return to stock form, HTC has come through!
http://www.htc.com/us/support/pure-att/downloads/
HTC PURE (AT&T) Original Ship ROM | 02.05.2010
This software is the actual ROM that the HTC PURE (AT&T) shipped with. less
In the event that the device has a fatal error and cannot be recovered by Soft Resetting or Hard Resetting the device, it may be recovered by reloading the original ROM. Please note that during this recovery process, the device will be Hard Reset and anything that is NOT part of the Operating System (contacts, calendar, music, etc) will be permanently deleted; always make a point of backing up your devices data on a regular basis!
Instructions:
1. Download and save the HTC PURE (AT&T) Original Ship ROM to your PC.
2. Power your device off.
3. Connect your device to your PC via the data USB cable.
4. On the device, press and hold the Volume Down and Power Button until you get the bootloader screen (tri-colored).
5. Once it bootloader mode, wait for "serial" which shows at the bottom of the screen to change to "USB".
6. Once USB shows on the device, on your PC double click on the HTC PURE (AT&T) Original Ship ROM to launch the RUU Wizard.
7. Follow all of the RUU Wizard instructions shown on your PC.
8. Once the update is complete, click Finish in the RUU Wizard and the device will reboot.
9. Once the device reboots it will run through the Customization Process; this must be allowed to complete.
10. Once the Customization process is complete, the device is then ready for use.
http://member.america.htc.com/download/RomCode/HTC Pure/HTCPUREATTOriginalShipROM.exe
A BIG THANK YOU to HTC!
will it change spl
for flashing we use hard spl 1.83olineix
will it change back to stock spl after the flash
Good eye dynamius; I've been hoping that this would show up at some point.
Is this with 2.1 manila?
manila 2.1
chikoo said:
Is this with 2.1 manila?
Click to expand...
Click to collapse
Unfortunately this is with manilla 2.1.
Does this mean we should expect to see a new official ROM in the near future though?
mizzikedamosher said:
Does this mean we should expect to see a new official ROM in the near future though?
Click to expand...
Click to collapse
There is already a new leaked rom but needed to a new hspl to flash it.
Cant Download
Hi
I can't download this rom.
I click in the link and it redirect me to another page, and I keep looping.
Now I'm in Costa Rica and maybe I need to be in USA to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
Thanks
blancofran said:
hi
i can't download this rom.
I click in the link and it redirect me to another page, and i keep looping.
Now i'm in costa rica and maybe i need to be in usa to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
thanks
Click to expand...
Click to collapse
MEGAUPLOAD: http://www.megaupload.com/?d=E01IBRNN
opensea said:
There is already a new leaked rom but needed to a new hspl to flash it.
Click to expand...
Click to collapse
Where is this official leaked ROM you speak of for the pure?
Only ROMs I see out is 3rd party cooked ROMs. Not anywhere close to the quality of official ROMs. And only ROMs that I've seen out that makes a huge difference in anything is the ones with Manila 2.5. Which are horrible in the sense that MMS doesn't work on them, because there is no way of opening it unless you do a registry hack and add a cab for it to open in windows messaging client.
finally! i've been looking forward to this
Thanks
Hey. Thank you very much
Hi
Hello How can I change the band to the following:
Network Type : GSM
Band Frequency: GSM (900+1800+UMTS(2100+900)
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
PURE dialer canvas
Great find! Any chance that someone could / has extract(ed) the phone canvas out of this rom to see if it addresses the delay issues associated with the topaz and leo roms?
great find buddy
naplesbill said:
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
Click to expand...
Click to collapse
that was a awesome work buddy ..
perhaps someone can re package the relocker with spl found from the download
Sucess
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
So that confirms you have to relock the spl before it will replace the hardspl with the original spl. That is good to know.
relocker replaces the spl to stock spl version 1.33
flashing again flashes the spl to 1.83
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
which rom ? ive downloaded the exe and notcied there were 2 nbh files, just wasnt sure