I wanted to update my imate jamin with gullum Prophet touch on this link http://forum.xda-developers.com/showthread.php?t=323013
Was doing my 1st step as described i got some error, so i use Shell tool to upgrade but after upgrade my phone got stuck on imate intro screen, then i tried to upgrade through Official rom but it even didnt worked please help me my phone is dead.
http://forum.xda-developers.com/showthread.php?t=328324
Happens frequently ...
Please, even in trouble, first check existing threads instead of creating a new one. Difficult to find anything anymore.
Related
Hi there, I have just upgraded or should i say tried to upgrade to the new WM6 coffie ROM and the Krystal ROM but with both of these I can flash, however upon reboot it stays at the 3 colour screen
I have followed the Hard SPL guide for a G3 ---- Check
So what have I done? please someone help - it's a mates phone
also I tried to go back to the original WM5 from the FTP site, but it fails because I have updated the SPL, I would appreciate a link to a WM5 that doesn't check and that is in english........ if that would fix the problem
One last thing - i tried to use the update tools again but it says there is no device connected so I did a hard reset and tried again but no go, after a hard reset i can flash the other roms though
cheers all
No Panic !!
andytof47;1862521 said:
Hi there, I have just upgraded or should i say tried to upgrade to the new WM6 coffie ROM and the Krystal ROM but with both of these I can flash, however upon reboot it stays at the 3 colour screen
I have followed the Hard SPL guide for a G3 ---- Check
So what have I done? please someone help - it's a mates phone
also I tried to go back to the original WM5 from the FTP site, but it fails because I have updated the SPL, I would appreciate a link to a WM5 that doesn't check and that is in english........ if that would fix the problem
cheers all
Click to expand...
Click to collapse
No Panic~~~
Pls try to have a look to the link at my signature
( HardSPL easier)
please reply if ok!
I thought The sticky on top of the forum covered this
Hey there, would this be the problem? I thought Jumpspl was included in the initial upgrade tools folder?
Is this the same? and also does this problem (tri color screen) happen when it hasn't been properly flashed with the hard spl?
cheers
andytof47 said:
Hey there, would this be the problem? I thought Jumpspl was included in the initial upgrade tools folder?
Is this the same? and also does this problem (tri color screen) happen when it hasn't been properly flashed with the hard spl?
cheers
Click to expand...
Click to collapse
that is good and for experience users, mine is mostly for juniors. Please read and nothing bad.
The jumpspl... 100% work, and follow the steps, never fail.
Will your method work when not booting?
Just read your method and I hope to try it soon, but will your method work if it is not booting --- the method sounds like it needs the system to boot is this correct?
I hope it will work on this system while it is not booting...... I will let you know
OK I just read the whole post -------- The only file I can see is the jump spl.zip --
is that the hard spl or what?
dioxda2 I see how helpfull you are and thanks so far but how do I get the phone out of recovery mode or whatever mode that is??? what is the file I need??? please
thanks heaps
Hi guys!
Apologies if this has been posted before, but I've scoured the forum in vain. Please point me to an existing thread if there is one!
I just tried upgrading my Wizard G4 to TNT5.0 TouchFlo and it didn't quite go to plan...
I was trying out this method and it got all the way through and told me it had finished, but there was some message on my device screen, I can't remember what it said - something about a file not being found or something. It wasn't the one mentioned in the instructions, so alas, it didn't twig and i reset my device
Now I can't get it to go past the screen with the O2 logo and the ipl/spl info. I downloaded Wizard_Love ROM but I can't get it to work. When I reset the phone, the computer does pick it up as a USB device, but as soon as the IPL/SPL text appears, it disconnects again (according to the tone from Windows) so I don't have a chance to run the app.
Any help would be greatly appreciated.
Thanks in advance.
J
Anyone? Should I just buy a new one?
The ShellTool method is deprecated and should not be used any more as there is high possibility to fail...
You should now get the Original O2 WM5 ROM to restore your original WM5, then use HardSPL or SoftSPL to flash WM6.
hi
I've a SPV C100 bought from orange france
I tryed to upgrade by another rom
when upgrading begin it's stoped at 13%
and restart i got a splash screen (start up orange logo)
I tryed most of rom but upgrading stops at 4% or i got invalid vendor ID
now i can't use my phone if someone can help me
Did my phone die?
I need orange rom fr original or another solution
I'm waiting for your answers
please help me!!!!
IMEI:359534005798165
S / N:SZ645F804879 A
P / N:99HCD060-00
HTC Innovation
Hello,
You should read before trying to flash your device. There is sticky post in the forum who contains a lot of important informations about Hard SPL.
About the original orange Rom i don't know where to find it.
fla242
after a lot of search, finally I got here and read this post...
I encountered the same problem, and I think my phone is 80% dead!
My phone was unlocked, but carelessly, I didn't complete the hard-SPL flash procedure and flash a new ROM directly, so it is dead...
I downloaded an original Orange ROM, but process stopped @4%, and returned "INVALID VENDER ID". Is there anyway that I can flash a new ROM?
Now my phone can enter the rainbow screen only, and it reads:
ONBL 1.08.0000
SPL 1.08.0000
Any experts here can offer a solution? Can I flash rom via SD card, and how? Really really appreciate your help.
SPV C100 was reborned!
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
how
how o make htc gold card for spv c100
l have not find any thing
imyels said:
I just can't hide the excitement when I finally flashed a ROM back to my phone.
This model is already quite old. Not sure if anyone still encounter the same problem. Anyway, I'd like to share how I did it, just in case it still helps you.
The key point is called "HTC Goldcard". It is made of a normal Mini-SD card, but it helps you to get a super-CID in tri-color mode.
Google it to find more details, and I am sure you guy can work it out yourselves. You could PM me as well, if you understand my Chinglish
Click to expand...
Click to collapse
The HTC GoldCard is a great way of rescuring a WM smart phone or ppc,it not only works on c100,but also other HTC mobile sevices
please tell me is there any way torecover spv c100
Here you can find a few Oxygen ROMs
Hi,
I just flashed my HTC 7500 with SPL 1.2 by installing AthenaWrapper which went through successfully. After upgradation , I flashed the ROM with SPL3.5_R6.5_B3_WM6.5_B21198.rar which also got installed successfully with no errors at all. However after installation , when the HTC was starting , it is just stuck at white screen and does not go ahead at all. I have tried all things including hard reset , but the phone does not come out of the white screen.
Can someone please help URGENTLY ? have I missed something during the installation ? How can I get the unit to boot atleast . In the bootloader screen , the SPL does show as 1.2.
Kindly help please ???
Thank you.
superlifer said:
Hi,
I just flashed my HTC 7500 with SPL 1.2 by installing AthenaWrapper which went through successfully. After upgradation , I flashed the ROM with SPL3.5_R6.5_B3_WM6.5_B21198.rar which also got installed successfully with no errors at all. However after installation , when the HTC was starting , it is just stuck at white screen and does not go ahead at all. I have tried all things including hard reset , but the phone does not come out of the white screen.
Can someone please help URGENTLY ? have I missed something during the installation ? How can I get the unit to boot atleast . In the bootloader screen , the SPL does show as 1.2.
Kindly help please ???
Thank you.
Click to expand...
Click to collapse
Hi there,
You have answered your own question. you up graded to spl1.2 and then flashed with an spl3.5 rom. you should have flashed an spl 1.2 rom. To use an spl 3.5 rom you need to upgrade again with AP4.0 rom that has the upgrade built in. there is no other way of doing it.
Now you will have to fix your athena with THIS HELPread from post 33onwards, and please read the athena WIKI.
Best of luck
Jay
Hello Jay,
Thanks for your quick reply. How do I get the Athena connected to my PC now ? I can't connect it through Activesync as it does not boot and is in white screen. Also I tried to put it in boot loader mode and then run the updater.exe but it displays a 'Timeout message ' whether the device is coonected and that Active sync is running ?
Can I install 1.2 ROM if that's possible ? If yes , can you let me know which ROM with SPL 1.2 ver can work ? I am just worried now as my Athena may be completely dead and I can't use it.
Can you help ? Thanks once again.
Hi Jay , Folks,
I am writing the codes that I see when I put Athena in bootloader mode :
[email protected])
IPL-v1.00
[email protected]$)
SPL-v1.20.Olipro
From this info , can it be fixed ? Please help
Thanks
Hi superlifer
welcome to the joys of flashing!
Jay has given you a solution to your problem.
Guess what!
You are not the first person to make the mistake you have made and it is documented in several places.
Jay pointed you to the specific post that will fix your problem but he also mentioned you should read the wiki.
i will add to this that you should also read the sticky threads at the top of this forum which include "the beginners guide to upgrading the ROM"
and another thread titled "How to FIX INVALID MODEL ID after bad flashing"
You have corrupted the radio by trying to flash an SPL3.5 ROM onto a phone formatted for SPL1.2.
These roms are different sizes and it wont fit, leading to the unintended consequence.
As I said in the beginners guide , you can flash from bootloader(the 3 coloured screen"
I hope all new owners read this thread and the others I mentioned as it will help prevent the angst you are feeling.
regards lakeman
Hello Jay, Lakeman, Cmonex,
Absolutely brilliant !!
My Athena is breathing again and is out of the dead white screen. I followed the steps to fix the model id and wifi (from CMonex ) and was able to overwrite the model id successfully. I then flashed it with ROM WM6.1 MULTILANG R6.1 MiChY which also got installed successfully. On bootloader screen it now shows as:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.20.Olipro
Many thanks first of all to you all and your timely reponses and perfect guidance.
I just want to know now which is the best stable SPL1.2 ROM now which i can install. I want to install 1.2 ROM with HTC Plugin and the big Digital clock and also which will have GPS. My previous ROM had QuickGPS which doesn't seem to be there now and is there way I could get it back. How can I use GPS on Athena.
Apologies as this device is completely new to me i am still getting used to its functions by reading lot of articles and WIKI for this model.
I am scared to put SPL3.5 as I might break something again. My donation is on its way.
Cheers
Just update to the 3.5 spl much much easier that way instead of waiting for anyone to backport their stuff to the 1.2 spl
I tried to flash rom wm 6.1 edition but suddenly when flashıng was %80, its broke and failure.
Now my phone broke only htc pic came.Please some one help.I read all the post about it.I cant master reset on my phone because when i push the 0 button htc pic came again.Only bootloader mode can works but ı try many than 10 roms it starts but when they are %5-4 ,they broke too.Then this type came "İmage file corrupted and please check update utiltiy"
I read at one blog if this situtaion came i must use smartflip stock rom to flash but i cant find imateclub's web site is broke too.
Here is the smartflip official rom http://rapid share.com/files/307222427/i-mate_smartflip_WWE_1.2.301.2_ship.exe
check my post about gold card method, and then you could flash with your official rom
Hello everyone
i got similar problem too. it can restart the phone but goes to all white screen.
i even tried over 15 Roms to reinstall it but it all got failed.
Here is my phone video below
http://www.youtube.com/watch?v=W9h91HWdkvA
Please give me some help.
Thank you so much
someone had told because i have IPL 1.02 & SPL 1.02 but with WM6 above system.
i need to re flash phone to IPL 2.00 & SPL 2.00, BUT .....How to do it ?
Please help!!
Thanks
read my post about gold card method. i had the same problem and recoverd my phone. good luck