Related
He Guys,
Just my luck I have bought an HTC Tytn with the original Dutch rom and sim unlocked second hand.
I wanted to put a new Dutch rom from HTC on it but I keep on getting the ERROR [244] : INVALID MODEL ID but what I don`t understand is I have used the original Dutch rom from HTC. So I checked the device information and under the tab identity it says;
Model No.: H
Platform: PocketPC
IMEI: xxxxxxxxxxxxxxxxxxx
Shouldn’t the Model No. be HERM200?
Has anyone any suggestions in how I can solve this problem so I can flash any rom I wish.
I have tried al the cid unlock programs I could find and in bootloader it says;
H
IPL-1.01
H
SPL-1.40.Olipro
Thanks in advanced.
Use RAR to unpack the Original Dutch ROM.
Take the NBH file that you get when you unpack the ROM.
Put it in a folder with CUSTOM_RUU from Olipro.
Run CUSTOM_RUU and it will load up the ROM from the NBH file, bypassing the CID check. Should work
Thanks for the reply,
I have tried what you suggested but I still get ERROR [244] : INVALID MODEL ID I have also read these posts http://forum.xda-developers.com/showthread.php?t=322231&highlight=CUSTOM_RUU+from+Olipro and http://forum.xda-developers.com/showthread.php?t=322119&highlight=CUSTOM_RUU+from+Olipro and http://forum.xda-developers.com/showthread.php?t=309707&highlight=CUSTOM_RUU+from+Olipro and tried these suggestions but every time I get the error message. The radio update process was the same for me it will go to 7% and then give the message ERROR [244] : INVALID MODEL ID.
I have also tried the HTC_Hermes_SIM_CID_Unlock_v3a and Hard-SPL-V7 but still get the error message.
I hope I’m doing something wrong if not then I hope you have a new suggestion.
Thanks in advance.
Please set your device in BOOTLOADER MODE and post here your IPL / SPL versions.
Junner2003 said:
Please set your device in BOOTLOADER MODE and post here your IPL / SPL versions.
Click to expand...
Click to collapse
Did you read first post?
VivaErBetis said:
Did you read first post?
Click to expand...
Click to collapse
Ups, missed the bottom - thought it is the signature already! Sorry, haven't had my coffee yet!
Well, looks like the device is CID unlocked!
How about trying to flash an entire cooked ROM?
i would suggest the following:
flash a cooked rom (any)
see if that makes any difference to your model id
then try and flash the native dutch rom
good luck
Hi Guys,
As you suggested I tried a cooked rom the Hermes_WM6_vanilla still get the same error message when I put my device manually in boot loader it shows;
H
IPL-1.01
H
SPL-1.40.Olipro
But as soon as I try an official or cooked rom it shows;
H
IPL-SSPL by des
H
SPL-1.09.ds
I’m now trying Schaps_WM6Pro_WWE_4.00_Full_Beta3.exe and choose for auto detect and it said 1.40 Olipro and in boot loader it shows;
H
IPL-1.01
H
SPL-1.40.Olipro
And after 1% I got the ERROR [244] : INVALID MODEL ID message again.
I think my options are getting slim.
Your ModelID is stored on NAND and can be edited quite trivially (mostly).
how it got corrupted I don't know, however, the important question is; can you get into the OS?
He Olipro,
The device it zelf works perfect I can go anywhere I want even in the OS.
Just lead the way.
Changing Model ID
I have a similar problem in that my Model ID got corrupted during a radio upgrade. I now get the same error (244) and am stuck on SPL2.10 and can't downgrade to fix it. Can anyone tell us how to manually change the model ID in the NAND?
Much appreciated.
Dumping NAND
Ok, I'm a relative newbie so appologies before I get flamed. Thanks Olipro for giving me a clue.
I have now got spl 2.60 on my device but am unsure how to dump the NAND. I've worked out how to dump the 3 partitions from the device to dump the OS but am still unclear which part of the device is the NAND. I've read the Wiki on the memory map but am still not too sure.
Anyone able to give me simple instructions to dump the NAND and once I've done that where abouts is the ModelID stored? Do I do this using mtty?
Thanks in advance.
http://forum.xda-developers.com/showthread.php?t=322225
NAND Dump
Thanks Drummer for pointing me in the right direction.
Ive done this bit:
BTW, if you want to do a full backup of you FULL eeprom nand at any time, connect as before and type these commands:
plink HERMES > full.nb (hit ENTER twice)
task 32 (hit ENTER once and only once from now on after every command)
password 0000000000000000 - My device password is BsaD5SeoA which I used instead.
set 1e 1
rbmc me.txt 50000000 7fff800
watch your file grow to 128 MB.
It creates a full.nb file but it stays at 1k!!
** Note I have copied the bootloader file for spl 2.60 on my Hermes and ran that so I can now use that versino instead of the 2.10 thats on my device if that makes a difference and have tried with no joy with either version. Yes I know it says to use 2.30 but I can't work out how to get that on my device due to the ModelID error.
The Model number is contained within the herm1.nb file that was posted by BusStop in that thread. No need for complete NAND reflashing, only that section. You'll see it using a Hex Editor. You should write down your WiFi MAC addess, so you can edit it before flashing the file with the corrected Model number. Now you just have to figure out how to get SPL 1.01 MFG on your device...
Thanks Drummer. I did try flashing the herm1.nb file but of course as I do not have SPL 1.01 MFG it gievs an error. I'll keep trawling through the site and see if I can work out how to get SPL 1.01 onto my device. I'm not going to let this damn device beat me.
Ok so I worked out how to get the ModelID using getdevicedata. Used nbhtool to create a vaild nbh using the ModelID I'd just got and used the spl from 2.30 and it updated that fine.
Excellent.
However did the same with the MFG1.01 and flashed it and......
I now have a dead brick, no power and no response form usb. Time to get a replacement device.
Thanks for all the help I've had. I'm sure it should have worked.
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
Thanks for the advice Drummer however:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber - Nope red light goes out!
Mne shows HHHHHHH
Hi all, i've upgraded my radio and after my model id changed to H.
So, reading some posts i've used NBHTOOL.
1.I've decompiled an original Italian ROM
2.i've obtained a custom nbh selecting only OS and EXTROM and changing my Model number.
3. after that i've flashed the nbh resulting into a write error at 84% and a bricked htc.
Luckily i was able to reflash roms and i processed to second experiment.
I've made a custom rom with only the os, and it WORKED!
so my questions are:
1. can i use my htc even if my external rom isn't flashed (it cames from an old Schaps 4.0 succesful flash)
2. It is safe to proceed installing bootloader SPL using the nbhtool like i did with the os?
In that case i will be able to fix the model id problem by flashinh spl 1.01 and using the wireless fixing method you posted..
Thanks in advance for your reply!
Hi
From my understanding the Ext rom is mainly used for carriers to install there specific addons and customizations so it shouldn't be a problem.
As you can see I did flash spl 2.30 using this method and it worked fine ti was only when something whent wrong flashing 1.01 that my problem happened but I think that may be that I used an nbs file instead of an nb file from what I've read since.
Good luck.
Edit: Just noticed someone on this thread has managed it by going straight ot 2.60 http://forum.xda-developers.com/showthread.php?t=322225
I get after 1% of the progress bar after all the rest of the questions an error 244 on the athena. Can anyone help. This apparently is a "INVALID MODEL ID " and I can't see why this would be. I have tried the 12 AP 3an and 4 as well as the michy rom. All do the same
And yes I have seen "How to FIX INVALID MODEL ID after bad flashing " post but when I follow the thread through the forun I get to the fixing wifi using mtty, is this really all that needs doing. Does the mac address and wifi sort also fix the vendor ID?
btbill said:
I get after 1% of the progress bar after all the rest of the questions an error 244 on the athena. Can anyone help. This apparently is a "INVALID MODEL ID " and I can't see why this would be. I have tried the 12 AP 3an and 4 as well as the michy rom. All do the same
And yes I have seen "How to FIX INVALID MODEL ID after bad flashing " post but when I follow the thread through the forun I get to the fixing wifi using mtty, is this really all that needs doing. Does the mac address and wifi sort also fix the vendor ID?
Click to expand...
Click to collapse
from the readme doc in radio 1.58 upgrade
" ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDER ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade."
Have you unlocked the phone?
read this
http://forum.xda-developers.com/showthread.php?t=429013
Yep thanks, aware of that and already new it was invalid model ID hence why its in my post. It a freinds Athena running SPL1.2 Mine on 3.5. We have both tried a number of roms previously and this happened when going to michy 6.1 for SPL1.2. (Note I had no issues on the SPL 3.5 athena).
Its odd, but what I really wanted to know was why when you follow the forum thread through on how to fix this you end up getting to the mac address fix using mtty? Why would the MAC WiFi fix fix the invalid model ID?
The Invalid model ID that that thread was for was caused by trying to flash a 3.5 ROM on SPL1.2which messed up all sorts of things.
Have you tried flashing the ROM you were using before?
btbill said:
Yep thanks, aware of that and already new it was invalid model ID hence why its in my post. It a freinds Athena running SPL1.2 Mine on 3.5. We have both tried a number of roms previously and this happened when going to michy 6.1 for SPL1.2. (Note I had no issues on the SPL 3.5 athena).
Click to expand...
Click to collapse
more information is good,better than mind reading!
My point was as confucious pointed out , you need to flash the right SPL version
btbill said:
Its odd, but what I really wanted to know was why when you follow the forum thread through on how to fix this you end up getting to the mac address fix using mtty? Why would the MAC WiFi fix fix the invalid model ID?
Click to expand...
Click to collapse
The reason they are both together was that cmonex was talking people through fixing both these problems on irc and eventually got sick of this so wrote a script to fix both problems at once.
Have you checked your SPL from bootloader? Sometimes it is not what you think and you will be able to see if the model id is corrupted.
I don't know your level of knowledge and if you have tried to flash from bootloader or can boot into an OS and are trying to flash via active sync.
It would also help to know what radio you had installed and if you are using vista/xp withh the appropriate Dotnet package
When you see someone with only a few posts asking for help, most people assume you don't have a lot of experience flashing roms
Thanks for the notes. Yes I tried to reflash from the bootloader. This is the first thing I tried. This where It all looks good then as the rom is progressing in the update bar on the PC and the grey screen you get on the athena. It never gets past 1% and then comes up with the error as described, the 244 error. BTW I have just done MTTY stuff..... holding breath now as try to reflash with a SPL1.2 R5.1 Michy.
Hey Worked, good stuff! always nice to know why you are doing something. So now we have a ROM with SPL1.2 we are now going to load the officeal AP4 latest as I am using on mine and I love it.
AP4 is quite old now - have you thought about Michy's ROM which comes in 1.2?
Mac address
btbill said:
thanks for the notes. Yes i tried to reflash from the bootloader. This is the first thing i tried. This where it all looks good then as the rom is progressing in the update bar on the pc and the grey screen you get on the athena. It never gets past 1% and then comes up with the error as described, the 244 error. Btw i have just done mtty stuff..... Holding breath now as try to reflash with a spl1.2 r5.1 michy.
Hey worked, good stuff! Always nice to know why you are doing something. So now we have a rom with spl1.2 we are now going to load the officeal ap4 latest as i am using on mine and i love it.
Click to expand...
Click to collapse
hi there,
i wanted to know that i am facing the same problem that u faced earlier. And u figured out the way to exit that problem through mtty and mac address.
My athena is stuck the bootloader screen so how can i get the mac address of my athena?
Is it printed somewhere on the device or do it comes with the manuals?
Help needed in this regards.
ERMANO.ESTE said:
hi there,
i wanted to know that i am facing the same problem that u faced earlier. And u figured out the way to exit that problem through mtty and mac address.
My athena is stuck the bootloader screen so how can i get the mac address of my athena?
Is it printed somewhere on the device or do it comes with the manuals?
Help needed in this regards.
Click to expand...
Click to collapse
It should be printed on the label inside the battery door cover, if not then i think you can find a piece of network equipment that you no longer use on your network and use that mac address.
anyone know what rom is compatible with athe100 SPL 1.10 ?
i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?
cowballz69 said:
anyone know what rom is compatible with athe100 SPL 1.10 ?
i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?
Click to expand...
Click to collapse
Have you took the sim card and memory card out?????
Jay
yes they are both out when tryign to flash, been over a week with out a working athena
cowballz69 said:
yes they are both out when tryign to flash, been over a week with out a working athena
Click to expand...
Click to collapse
try flashing your original ROM which should be found in the wiki section.
ignore what I said below and report back if you were able to load your original ROM
***Ignore this read above**Once your phone is working , do the athena wrapper which should load SPL 1.2
Also read this
http://forum.xda-developers.com/showthread.php?t=429013
yes I tryed to flash the original rom (its a wm5 i beleive to), still gets error after 1%,, downloaded both on the wiki and the ftp site, =\ been over a week so far no clues on why i cant flash, i even tryed to change the mac address using mtty, but instead of going into level = 0 , i get level = FF witch means the phone is locked out from flashing anything threw mtty,
thank u guys so much for responding on my issue
I also tryed doing the unlocker and its a no go
If the error when it stops at 1% is "invalid model id" the solution is here http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
cowballz69 said:
yes I tryed to flash the original rom (its a wm5 i beleive to), still gets error after 1%,, downloaded both on the wiki and the ftp site, =\ been over a week so far no clues on why i cant flash, i even tryed to change the mac address using mtty, but instead of going into level = 0 , i get level = FF witch means the phone is locked out from flashing anything threw mtty,
thank u guys so much for responding on my issue
I also tryed doing the unlocker and its a no go
Click to expand...
Click to collapse
I think this means your phone is not unlocked
with respect to sergiopi , you cant do the mtty script.
I would suggest you msg cmonex or try to talk to her on IRC on the
dxa-devs channel
addendum
seeing that you have nothing to lose, why dont you try flashing the original rom from the sd card using the method in the wiki
cowballz69 said:
anyone know what rom is compatible with athe100 SPL 1.10 ?
i know theirs lots of 1.2 and 3.5 spl roms, i tryed to flash a 3.5spl on my phone and now only way i can turn on the phone is in bootloader, i try to flash the phone but it always gets stuck at 1%, can anyone assist me?
Click to expand...
Click to collapse
I have the same problem.
what I do...
I have ameo t-mobile...windows mobile 5.0
run AthenaUnlocker
Step 1 make all finish noc problem
Step 2 hung up on 60 %
bootloader no problem....but can´t flash original flash always stuck at 1% and reboot...
flashing the original rom from the sd card using the method in the wiki ...
make it, but no do...on screen see
cheking...
loading....
than come on screen
0002802
ching...
loading...
not allowed
sergiopi said:
If the error when it stops at 1% is "invalid model id" the solution is here http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
Click to expand...
Click to collapse
My error when it stops at 1% is "invalid vender id"
my image version is demaged
Re: Ameo from t-Mobile german - repair
________________________________________
hi
what is your CID? use mtty command "info 2" to find out.
for example, if it is TMOB_007, you have to find a shipped athena rom with that CID.
if you cannot find a matching rom, let me know, i can still help,
cmonex
HTCS Þ?ÒtHTCE
please need halp
thx
felix999
read this post http://forum.xda-developers.com/showpost.php?p=2154726&postcount=33
read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM
lakeman said:
read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM
Click to expand...
Click to collapse
in mtty this can read:
when type task 32
become LEVEL: FF
when type info 2:
HTCS Þ?ÒtHTCE
my CID is 1.1
on bootscreen can see this:
ATHE100
IPL-v1.00
ATHE100
SPL-v1.10.RP00
what I do before...
Ameo WM 5.0 >>>>my mistake not update to WM6.0
run AthenaUnlocker
STEP1>>>OK
STEP2>>>by 60 % hang and stopped....
and now have the big problems.....Image ROM of t-Mobile 5.0 german demaged
can´t flash any rom´s
thx for hel or I want to pay bucks for service, when ma ameo live again...
felix999
lakeman said:
read this post which tells you how to run mtty
follow the instructions to start mtty then press enter to get the cmd prompt
then type info 2 to get your CID
depending on this you will be able to flash the apprpriate ROM
Click to expand...
Click to collapse
this is my CID
Cmd>info 2
info 2
Wait interpreter timeout
HTCS Þ?ÒtHTCE
????????
don´t know
felix999
Athena mobile 6 > SPL 1.10
become today a answer from crazy cat, that olipro say must take an rom in athena forum....
I flaswh with so many roms...anytime same error: error 294 - invalid vendor ID.....
My SPL 1.10 >>> can´t find a rom with SPL 1.10
what rom can repair my demaged ameo?????
thx for help
felix999
problem solved with ONLINEHELP from>>>>>cmonex>>>><<:::::>><<:::E:::>><<:::R:::>><<:::F:::>><<:::E:::>><<:::C:::>><<:::T:::>>
thx
felix999
lakeman said:
try flashing your original ROM which should be found in the wiki section.
Click to expand...
Click to collapse
Is this how you solved your problem?
Hi,
I have a big problem.
Sorry, but i already search in this forum but no success.
I upgraded a ATH100 with a SPL 3.65 ATH400 Rom
Now, i try to back to ATH100 but i cant. With PC and RomUtility, i get MODEL ID 244 error.
With SDCard i get 00058002 error while Loading...
Anybody can help me.?
Thanks
athena400back to 100
i was in too, now if you cant downgrade yet,sent me an Email ,to [email protected] and sending to me alot of pic from thet and information about your rom.
hi guys,
I had the same issue too....can not flash from SD card with 00058002 loading ...
any solution yet ??
hi guys,
I had the same issue too....can not flash from SD card with 00058002 loading ...
any solution yet ??
I have same problem. Please anybody can help me?
Try out This>>>>>
ERROR [244] : INVALID MODEL ID
from cmonex @xda-dev
This is good for both corrupt modelid and corrupt wifi, and fixes both at the same time.
STEP BY STEP:
1. download attachment at the end of the post for mac1.exe (requires .net 2.0 installed on the PC)
2. you will also need to download the other attachment in this post for the mtty program.
3. enter bootloader (tricolour screen) manually by pressing and holding camera button all the way in (yes I mean that, press it in as hard as you can!!), while doing a reset, then keep the camera button held until you see the tricolour screen.
4. disable USB in activesync (wmdc if you have vista - in this case, do not kill wmdc, just disable usb in it!!!)
5. run mtty and select USB option from the dropdown box!
6. then press enter in main window that comes up, see if that gives you Cmd>
7. now you should have Cmd>, if not, re-check if you did the above steps right until you get Cmd>
8. now run the mac1.exe, type in your MAC address you want to use for the Athena, if you have SPL 3.xx reported on the tricolour screen, then use the button for SPL 3.xx, otherwise if you have SPL 1.xx reported, use button for 1.xx.
9. this should have generated a .bin file for you, copy that bin file in the folder of mtty.
10. now, in mtty, type (do not copypaste!) this command: task 32
11. this should return Level = 0
12. now, you must only do one of the two following commands:
- if you have SPL 3.xx, then type (do not copypaste!!) this command: lnb filename.bin 76508000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
- OR, if you have SPL 1.xx, then the command is different (do not copypaste!!): lnbs filename.bin 75108000
(there filename is the name of the .bin file you generated - don't forget to put .bin after filename, as the full name is needed).
NOTE, the command starts with a lowercase "L", not "I"!
WARNING: PLEASE DO NOT MIX UP THESE TWO DIFFERENT COMMANDS!!!
if this info helps: most people will have SPL 3.xx, and if you have AP4 (not vanilla) already running then you're definitely 3.xx
13. mtty will popup a window asking "OK", you press OK!
if you get "Fail to synchronize with the host (1)", then make sure you did follow step by step. if still same error, try placing mtty and the bin file under C:\.
14. now the file downloads, if mtty reports it flashed the file, and at the end "code entrypoint unknown", then that's it, now boot back to WM and see if wifi works.
Download: Mac1.zip mtty_0513_Test.zip
But where atachment ?
For me....WORK...THANKS again CMONEX
but i not do to repair wifi i want to flash my wm........
help me please ,,,
i make hard spl for athe400 in athe100
"ERROR [244] : INVALID MODEL ID
from cmonex @xda-dev
This is good for both corrupt modelid and corrupt wifi, and fixes both at the same time"
as it says it fixes corrupt modelid
It is worth a try
ERROR[244] :Invalid model ID ATHE100
Hi,where do i find the MAC adress for my ATHE100 as i cannot get forward from the bootloader?I am using SPL-v1.20.Olipro.Thanks to any1.
Yes, where is the MAC ADDR
As above, would be grateful if anyone would help us find where the MAC address and thanks for this thread this is the bane of most new owners and newbies. Cheers!!
Mac addr found, but......
Yes found the MAC address - it's under the battery cover, but having gone thru the whole process I got the following 3 errors at the end-
ERROR: no header matched
Transfer CERT error
Flash Programming Error
Thanx buddies!
3 ERROR Messages!!!
Hi Lakeman, could you help decipher these mysterious errors which I had after I have gone through the process twice
ERROR: no header matched
Transfer CERT error
Flash Programming Error
Thank you!
invalid Command
command error
whats wrong???
Cmd>lnb ameo.bin 76508000
lnb ameo.bin 76508000
Command error !!!
here you go >> http://xacsx.de
german ameo-site, roms, repair, and other helpful things
command error
whats wrong???
Cmd>lnb ameo.bin 76508000
lnb ameo.bin 76508000
Command error !!!
if you get notice
-> ERROR [242] : INVALID LANGUAGE
-> ERROR [244] : INVALID MODEL ID
-> ERROR [294] : INVALID VENDER ID
-> ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
stuck in bootloader. Help needed.
I have a HTC Athena x7500.
accidentally upgraded my htc x7500 WITH SSPL-Manual-x7510.zip of HTC X7510
Wend I turn on the device, it goes directly to bootloader and
the screen is:
ATHE 100
IPL - v1.00
ATHE 100
SPL-v3.05.0000 OR my old spl is 1.10.0000
I have tried to change the language of my athena and then he died :spanish > fransh
USB (wend is to connect)
series (wend is unconnectable).
I can not turn the unit off by pressing the button, but must take
the battery.
I have tried with hardspl its not working
I want a solution in the forum xda-develop it says my q must upgrade to the rom of espana oficial
After downloading the rom:Advantage_HTC_SPA_2.21.412.1_1.50.00.00_Ship
I tried to upgrade to this rom May j has a mesage on my athena screen:
found spl v1.10
dowload Spl before v3.05 is not allowed!
I tried to update it with the sd card i have the same mesage
upgrade with athenaUnlucker not work
upgrade with hardspl v7 not work
upgrade with CheetahUnlocker not work
upgrade with athena wraper not work
I have explored ruu_signeg.nbh in spanish rom with notepad jai entered the signer spl 1.10 I know if is sure or not
I believe there is a problem in the image rom saved in my athena rom
what I see on the screen of my athena is the spl 3.05.0000
The real spl is 1.10.0000 there is confusion in my spl
with mtty : task 32 level=ff
is what I can fix this problem with mtty
so if possible please guide me
I board on my pda (cid locked)on the Spanish language HTC_304
sorry for my bad Englis
thank you in advance
My email: [email protected]
http://forum.xda-developers.com/showpost.php?p=5205291&postcount=8
I think there is another thread somewhere about this but you could try the incorrect ID fix in the post above
and try to do the lower SPL
Hi!
sorry for my English, cant run AthenaUpdater because error 266
my spl 1.07.0000 dont work any upgrade, i want to install win mobile 6
how can i upgrade my spl?
korkmaz83 said:
Hi!
sorry for my English, cant run AthenaUpdater because error 266
my spl 1.07.0000 dont work any upgrade, i want to install win mobile 6
how can i upgrade my spl?
Click to expand...
Click to collapse
Tell us whats on your bootloader screen: to get to the bootloader
Press and hold the camera button, while holding the camera press and release the reset hole (while holding unto the camera button), when the multi-colored screen ups let go of the camera button. tell us displayed on the screen.
ATHE 100
ipl v 1.00
ATHE 100
Spl v 1.07.0000
any rom get error or vendor id or error upgrade tool
korkmaz83 said:
ATHE 100
ipl v 1.00
ATHE 100
Spl v 1.07.0000
any rom get error or vendor id or error upgrade tool
Click to expand...
Click to collapse
have you tried to install the AP4 rom? for it to work you have be connected through active sync or if you're using vista or windows 7 you have to be connected through wdc (windows device center)
can your phone start up into windows mobile?
lennie said:
have you tried to install the AP4 rom? for it to work you have be connected through active sync or if you're using vista or windows 7 you have to be connected through wdc (windows device center)
cna your phone start up into windows mobile?
Click to expand...
Click to collapse
WDC write not connected, but on device when plug usb cable write usb.
korkmaz83 said:
WDC write not connected, but on device when plug usb cable write usb.
Click to expand...
Click to collapse
ok, it seems you can't boot into windows mobile then, there is a modified AP4 rom made by IRUS that should be able to work.
try this one: http://www.megaupload.com/?d=4I3J02KK
tnaks 4 you help
i run ROMUpdateUtility but error 270 image file is corrupted. check your utility
i have dowlload its 2 ways from IE and opera and check by winrar
korkmaz83 said:
tnaks 4 you help
i run ROMUpdateUtility but error 270 image file is corrupted. check your utility
i have dowlload its 2 ways from IE and opera and check by winrar
Click to expand...
Click to collapse
sorry to hear that it didnt work.
go here, and download one of IRUS roms, they should be based on AP4 see which one works for you.
http://forum.xda-developers.com/showthread.php?t=397518
error vendor ID
no result =(
korkmaz83 said:
ATHE 100
ipl v 1.00
ATHE 100
Spl v 1.07.0000
any rom get error or vendor id or error upgrade tool
Click to expand...
Click to collapse
Sorry for butting in but you haven't unlocked the rom and can only flash the original rom that came with the phone.
have you tried a different cable and computer.
you have to be connected with activsync/wmdc and have an apprpriate version
If you have tried this and still get the invalid vendor then you could try cmonexs invalid vendor and wifi fix.
If this does not work and you still have a bootloader cmonex may be able to help
fyi from th e text contained in radio 1.58 upgrade
ERROR [242] : INVALID LANGUAGE
ERROR [244] : INVALID MODEL ID
ERROR [294] : INVALID VENDER ID
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
here is my ID
SN :HT717FM03975
IMEI :352555010341433
Part Number :99HCN053-00
Part Description :SKU,HTC,English-WWE,GENERIC,Black,HTCX7500,EU,Athena-C9,w/o SIM Lock
Customer Name angaard Telecom MS A/S
Customer Model :HTC X7500
HTC Model :ATHENA-C9
Error Message :
i need wm5 rom for spl 1.07?
i try all roms from here http://forum.xda-developers.com/showthread.php?t=397518
all give me erorr =(
i have try on 3 notebooks...
i also try to use mANUAL FROM HERE http://forum.xda-developers.com/showthread.php?t=528259
it give to me only -
task 32
Level = FF
korkmaz83 said:
here is my ID
SN :HT717FM03975
IMEI :352555010341433
Part Number :99HCN053-00
Part Description :SKU,HTC,English-WWE,GENERIC,Black,HTCX7500,EU,Athena-C9,w/o SIM Lock
Customer Name angaard Telecom MS A/S
Customer Model :HTC X7500
HTC Model :ATHENA-C9
Error Message :
i need wm5 rom for spl 1.07?
i try all roms from here http://forum.xda-developers.com/showthread.php?t=397518
all give me erorr =(
i have try on 3 notebooks...i
Click to expand...
Click to collapse
Korkmaz kardeşim,benden yardım istermisin?
im russian, dont understand what you write sorry =(
korkmaz83 said:
im russian, dont understand what you write sorry =(
Click to expand...
Click to collapse
ok
spl 1.2Olipro
unlocker for athena
http://forum.xda-developers.com/showthread.php?t=315831
read this
duvanme said:
ok
spl 1.2Olipro
unlocker for athena
http://forum.xda-developers.com/showthread.php?t=315831
read this
Click to expand...
Click to collapse
tnaks dont help
I think I found you a solution try this:
does your bootloader still reads:
ATHE 100
ipl v 1.00
ATHE 100
Spl v 1.07.0000
?
if it still say that then go here ftp://ftp.xda-developers.com/Athena/Shipped_Complete_Updates/ and download the rom at the first link. put your phone into bootloader mode and install the stock rom. when it is done, use the AthenaUnlocker to unlock ur device and hardSPL it
hey man should do before unlocker( oem spl-> spl 1.2Olipro)
this? ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32.00.10_108_ship
error 294 inlavid vendor ID
i run it in bootloader mode, it show me usb connection.
it still
ATHE 100
ipl v 1.00
ATHE 100
Spl v 1.07.0000
help me plz, i will pay for help!
korkmaz83 said:
this? ruu_athena_dopodasia_wwe_1.24.707.3_105_6275_1.32.00.10_108_ship
error 294 inlavid vendor ID
i run it in bootloader mode, it show me usb connection.
it still
ATHE 100
ipl v 1.00
ATHE 100
Spl v 1.07.0000
help me plz, i will pay for help!
Click to expand...
Click to collapse
Did you try athena unlocker? you can not do anything without unlock