Related
Hi there, I am wondering if it is possible for the XDA to work in Australia. I have the upgraded rom from Xda devellopers and have removed the sim lock, but it dosen't seem to pick up the Aus networks.
Any help would be great
What for device are you using? PW10A or PW10B?
Maybe it's a problem with the GSM-networks. PW10A is for 900/1800MHz and PW10B for 900/1900
Have you tried to search manual for any available services?
Stefan
How do I find out the PW10a or b info.... The other version info is as follows
ROM Version; 3.17.03 ENG
Radio Version; 4.21.00
Protocol Version ; 32s54
Sorry, found it....PW10A1
I am guessing no one has any help or info about this. what a wasted purchase.
The XDA/XDA II/XDA III (IIs) do work in Australia.
Where is your XDA from, country? What network are you trying to connect too down here?
I have been told it is from the UK. I purchased it 3rd hand so I can only go by what the previous owner has told me.
In the auto config screen, I get the options for 02 network from UK, Ireland, De and a few others.
I am wanting to connect it to an Optus network preferrably, but any would do.
I have tried Optus (plan and prepaid) and telstra plan, but no signal shows up.
Just clarifying, you have tried Optus and Telstra phone services or data services?
You verified the SIM's worked in another phone?
The sims are able to be swapped into various phones, I have a panasonic gd50, a nokia 7250 and a motorola v600, and an ericson (can't remember what model) and they all work in each other.
The sims are set up as phone service, ie: normal mobile usage, I have even tried an optus prepaid in it.
I am only wanting to use it for the phone service, gprs and net usage is not of interest as yet.
Howdy, I have the same model and it works fine on Telstra. I originally had problems with SIM lock and GID lock, but after upgrading to 2003 from lumpistefans kitchen I've had no problems with it! Good reception and minimal drop out. It's not a waste of money. The ROM i used was the O2 one and did not use the auto config, it finds it for itself and aknowledges the telstra network fine. If you go to an Optus shop they should be able to help, they also have pretty good phone help and should be able to talk you through the settings,
Good luck!
Peace,
Robert
Thanks Ryap. I am thinking that it should automatically find the network tho......is this not the case
I know on XDA II and PDA2K you can select the network or set it to Automatic. Might want to check this setting.
SETTINGS > PERSONAL TAB > PHONE > NETWORK TAB
I am thinking that it should automatically find the network tho......is this not the case
Click to expand...
Click to collapse
I think you are confusing the autoconfig of the device with the network setup for the phone.
You can cancel the autoconfig that appears at the end of a hard reset. This just gives you some quick settings for the GPRS and MMS networks - you can add these later after talking to Optus.
Once the SIM is in, you need to make sure the phone is on by switching OFF flight mode. This kicks the phone in. Then if Optus is not picked up as your default network you just go into Settings>Phone>Network and then use the Find Network button and then the Set Networks button. After that you can check the Automatic Network selection button to make the settings stay.
Flickster
Hi all, thanks for the support so far,
As of now, I can't get any network at all....still.
when i insert the sim and enable the phone it says serching, but thats about it.
I have no idea where to find the flight mode, and when I click on the phone in the settings screen, nothing happens.
I don't get any carrier name or logo come up and appear.
Cheers
Michael
On XDA II (don't have XDA) when the phone senses a service it puts four vetical bars next to the speaker/volume icon at the top of the screen. If you tap the bars it should bring up a pop-up, this is where there should be a line (link) to click on that says "Turn off flight mode". I am not sure if this is part of the original XDA though.
When you clicked on the PHONE icon under SETTINGS it didn't do anything?
At the top bar, next to the speeker, I have a tree type logo and when i tap it it says searching. When i open the phone and then click options, it freezes for about 5 maybe 7 mins and then the settings screen opens, from there it freezes and i can't select anything
Hi all.
I am greatful for you help and support up till now.
I have managed to fixmy problem.
When putting the xda devellopers rom on the pda, ther eis an option calledGSM Band in the programs list.
Well turns out it was set to 900, so i changed it to 900/1800 and rebooted the xda.
WELL HEY PRESTO, IT FOUND THE OPTUS NETWORK
So all is good and all works.
As I mentioned before I am greatful for all the support and thankyou to all who racked their brains over this.
Can somebody help me set up my device to correctly access the Rogers network in Canada?
Everytime I reboot my device the network settings dialogue complains that it is not set correctly. Of course the built in settings don't work for Rogers and I'm not sure what needs to be done to get it set up and working.
Thanks.
Hello Everyone,
I have seen that an unlocked Streak should work on Bell in Canada. My current phone is an HTC Touch (CDMA) and I have acquired a Bell SIM card for my Streak. After inserting it into the phone (Twice - once in store and once at home through online site) it finds Bell under Networks, but fails to connect stating the following:
Unable to connect to the network at this time. Please try again later.
Here are the details of the Unlocked UMTS Streak I have originally from Dell.com:
1 225-0059 Streak UMTS Base
1 318-0145 Carbon,Streak
1 317-1902 16GB SD Memory Card
1 331-0805 Black Barcode label,16GB,UMTS,No SIM, Online,Unlocked,Streak
1 331-0789 Dell Streak Documentation & Manual, Unlocked
1 926-0563 Advanced Exchange Limited Warranty Initial Year
...
Please let me know what I need to change/do to get this activated. I really want to have this up and running and eventually add a HSPA/3G data plan.
Is it any settings that need to change or do I have the wrong hardware? Let me know if further information/clarification is required.
Additionally, from my understanding, the first SIM that was activated in-store(and correspondingly deactivated) was wasted since I had to switch back to my HTC Touch to have a working phone. Is this a valid assumption?
Thanks and I really hope someone can save me. I did not purchase this solely for usage as a tablet. Lastly, in store when the representative tried my serial/IMEI it stated that the phone should in fact work.
Thanks,
Jazz
It should work but maybe try this:
In the dialer type *#*#307#*#* to Enable engineering apps in launcher
Then go to EMList in you app list. In EMList choose network settings, try and see if all of your networks are enabled. See if that works, then maybe check your APN settings as well as make sure the phone is set to WCDMA only. Rogers and Bell share a lot of the same frequencies. Obviously the unlock on your phone is good because it wouldn't let you use a SIM otherwise.
The MyTouch didn't have a CDMA version, just a WCDMA version I think so the frequencies should be fine. Maybe try doing a factory reset might help too.
Hello,
Thanks for rapid response
I tried the dialer thing provided and it says ensure correct Passport is on the SD card. Not sure how to proceed there?
EMlist does not come up, however, SIM Toolkit looks new?
APN settings are blank and I set the Streak to WCDMA only.
I was not sure what you meant by MyTouch. My previous model was an HTC Touch.
I think if there are no more options, I may factory reset?
Please let me know and thanks for your help!
Hello
After performing a simple reset (on/off) the device works and is now stating that it is on the Bell network. Thanks again for all of your help! I am very excited about this.
Great! So yours is working. I just bought my Dell Streak last night, I have the exact same problem you had, except, rebooting the phone has not worked. I've even purchased an unlock code, and unlocked my phone again, still doesnt work! What do I do, please, someone help me.. -.-
I love this phone....there, I said it. But it's driving me crazy.
I bought it from a Chinese retailer, who shipped it with X821 firmware, but the box states that it's an X820. I doubt there is any difference in the hardware.
I would have left everything as it was, but I can't seem to make phone calls (don't have a data plan yet...yeah, I know....) with anything other than 2G, and that is about to go extinct. When I set it to WCDMA, it shows a UMTS connection, with no carrier designation, but the tower is the same one I connect to with 2G. The phone does sometimes show an AT&T 3G connection in the status bar, but I can't make calls, even though I have full signal. When I place the same SIM in my old HTC Inspire, the same monitoring app shows "UMTS - AT&T HSDPA+" and works just fine.
I'm at my wits end. I have rooted, installed TeamSpain recovery, replaced the firmware with the X829 and even tinkered with the frequency configurations through DFS Studio (which did a lot of complaining, and I'm still not sure if the changes stuck 100%). I also played with APN settings and tried the SIM in different slots, both alone, and with another SIM. And after all of that, still no progress in getting this phone to use a 3G or 4G connection to make calls. If I don't set it to "GSM only", no phone calls in or out. I'm essentially right under a tower, so signal shouldn't be an issue.
If anyone is using the same provider in the US, and is not having these kinds of issues, I'd really appreciate hearing what firmware you are using, and/or what you did to get things working.
I am using it on x820 with official stock 0.17s firmware, and did a dirty flash to cuoco92's 17s firmware. Everything works including HD voice calls, and full LTE.
xterminater07 said:
I am using it on x820 with official stock 0.17s firmware, and did a dirty flash to cuoco92's 17s firmware. Everything works including HD voice calls, and full LTE.
Click to expand...
Click to collapse
I tried this, as well as the Remix ROM. In fact, I think I've tried just about everything, without success. At one point, I had one of the apps indicating a 4G connection, but the phone diagnostics showed GSM (2G). Even the apps aren't all sure what to make of what's going on with the connections reported by this phone.
Currently on the cuoco92 v35 ROM. When WCDMA is enabled, I see simply a good UMTS connection , sans carrier name, in the "Network Cell Info Lite" app, and no ability to make calls. I also often (but not always) see the "AT&T 3G" sign. 4G or LTE never shows at all, even though the diagnostics show that the phone is communicating with an LTE transmitter, when preferred network is set to "unknown". It won't even let me set things like "LTE only".
Any chance you could set your phone to WCDMA and see what the "Network Cell Info Lite" app shows you? Anyone else with this phone on AT&T?
BTW, I am now using a data plan, which I thought might make a difference. It doesn't. EDGE data only for me . New SIM card is on the way, but my hopes aren't high.
Is it possible for a Chinese seller to have borked the phone so thoroughly with their x821 ROM (it's an x820 marked phone), that it keeps any subsequent radios from flashing properly? I don't know how/why it would work for some and not others.
Starting to really dislike this "phone"......it's more of tablet at this point.
Thanks.
I think APN is not set for AT&T
try this:
"Main steps
To use data services on our network with a non-AT&T device, you may need to program the data settings. The sections below provide the correct settings and steps for programming based on your device type and operating system.
.
Access the Settings menu.
Locate and select Wireless & Networks or More Networks.
Select Mobile Networks.
Select Access Point Names.
Locate and select the option to add a new APN. This is usually accessed by a + symbol on the screen or by tapping the menu button.
Program each field using the settings below.
Save the changes to return to the APNs menu and select the new APN.
Name ATT Phone
APN phone
Proxy Not set
Port Not set
Username Not set
Password Not set
Server Not set
MMSC
MMS proxy
MMS port
MCC 310
MNC 410
Authentication Type None
APN type default
APN protocol IPv4
Bearer Unspecified
Note: If you are unable to program your device following the steps above, refer to your user manual or contact the manufacturer for assistance."
Cadet_C said:
I think APN is not set for AT&T
Click to expand...
Click to collapse
Thanks, but I wish it were so simple. I have tried this, and other APN settings. None work to get this phone to be usable on anything other than 2G.
I just received and activated the replacement SIM. Still no improvement. While typing this, I have Network Cell Info Lite app running, and with the Set Preferred Network Type showing "Unknown" in the phone's diagnostic screen, It will switch randomly between "EDGE AT&T" (which works fine) and "UMTS -" (which is useless). Both have strong signals. For a split second before it switched to "UMTS-", the app showed "GPRS AT&T", but only for a split second before it kicks over to "UMTS-".
I wish someone using this "phone" on AT&T in the US, would run this app to compare notes. It may be that that the phone works fine on a full implementation of LTE (i.e. in locations where AT&T have already deprecated 2G) but not in other areas. Still, that doesn't seem to explain why this phone seems unable to register on the same 3G network, used easily by my other phone, with the very same APN settings and SIM.
You would have to call att and check if they turned our phone on to use lte. If your phone is not "registered" as an LTE capable phone it wouldn't be able to pick it up. This phone has all the bands needed for AT&T because I am using it now. All LTE work straight out the box, and i'm on the latest 19s cn rom
xterminater07 said:
You would have to call att and check if they turned our phone on to use lte. If your phone is not "registered" as an LTE capable phone it wouldn't be able to pick it up. This phone has all the bands needed for AT&T because I am using it now. All LTE work straight out the box, and i'm on the latest 19s cn rom
Click to expand...
Click to collapse
I'm a bit confused. Is this what you did to achieve proper function of this device? I.e. calling AT&T and getting them to do this for you? My conversation with their tech person didn't seem to bear fruit in this regard.
Also, which slot do you have the SIM card in? I've used the stock 17s and now on cuoco92 v35 ROM. There definitely seems to be a difference in how the network settings behave, based on the location of the SIM. At one point, after selecting BAND 6 (when it would let me), the phone showed a constant "AT&T 3G" connection, but it was useless. No calls and no data.
I recently purchased a refurbished phone Samsung Galaxy S21 5G. I just got it yesterday, and found that I am not able to use my mobile network. The sale said it is factory unlocked, and according to the descriptions, it should work just fine with my US Mobile SuperLTE network as well. When I switched on the phone, I see Verizon on the screen and so, I assume that it was locked to Verizon in the past.
When I tried to change the network settings, specifically the APN settings, I get the message "Access Point Name settings are not available for this user." The three dots on the top with reset to default is also greyed out along with Network mode in the previous page. When I click Network Operators and try to connect to the network manually, I am only able to connect to Verizon Wireless and no other. But, calling and messaging seems to work fine. Is it that the unlock process has not been completed properly? Did any of you face the same problem before? It would be great if there is something that I could do to unblock the APN settings as the rest of the phone works really well. The specific model is SM-G991U.
Thanks!
Aisp said:
I recently purchased a refurbished phone Samsung Galaxy S21 5G. I just got it yesterday, and found that I am not able to use my mobile network. The sale said it is factory unlocked, and according to the descriptions, it should work just fine with my US Mobile SuperLTE network as well. When I switched on the phone, I see Verizon on the screen and so, I assume that it was locked to Verizon in the past.
When I tried to change the network settings, specifically the APN settings, I get the message "Access Point Name settings are not available for this user." The three dots on the top with reset to default is also greyed out along with Network mode in the previous page. When I click Network Operators and try to connect to the network manually, I am only able to connect to Verizon Wireless and no other. But, calling and messaging seems to work fine. Is it that the unlock process has not been completed properly? Did any of you face the same problem before? It would be great if there is something that I could do to unblock the APN settings as the rest of the phone works really well. The specific model is SM-G991U.
Thanks!
Click to expand...
Click to collapse
So, you need to go into the settings menu and find about phone, software info. What you want to find is the CSC information.
It will basically look something like this: XAA / XAA-XAA / XAA (or some other letters like VZW or ATT or TMB etc etc.
What taht will tell you is very helpful in determining what rom the phone is running and what kind of device it was originally. Find that in your device and post it and people will help you to figure out what it means.
AsItLies said:
So, you need to go into the settings menu and find about phone, software info. What you want to find is the CSC information.
It will basically look something like this: XAA / XAA-XAA / XAA (or some other letters like VZW or ATT or TMB etc etc.
What taht will tell you is very helpful in determining what rom the phone is running and what kind of device it was originally. Find that in your device and post it and people will help you to figure out what it means.
Click to expand...
Click to collapse
Thank you so much for your reply. I looked through the software section in the about section. I found the following codes about the rom.
Aisp said:
Thank you so much for your reply. I looked through the software section in the about section. I found the following codes about the rom.
Click to expand...
Click to collapse
So the csc info is complicated, I'm no expert on it. But it does look like the OYN indicates it's a multi csc rom. It does have XAA as a part of the code, and that indicates it's 'open' for that specific part. But all the others are VZW. So it's running a vzw rom, obviously.
Your sim US Mobile uses both verizon and t-mobile networks. So it working for calls and texts makes sense, as a vzw phone. You could use patched Odin and flash a different (open) rom, but first you should verify that the device really is unlocked from vzw.
Best way to do that would probably be to insert another carriers sim card and see if it can make calls / texts. If not, it's not unlocked. But are you saying everything works now except mobile data? IOW, no internet access?
I had an international sim card at hand and I put it in. Interestingly the APN settings are no longer blocked. But, I do get a notification from setup wizard saying the inserted sim is not from Verizon and some services may not be available. But, messaging still seemed to work and I was also receiving 4G.
Aisp said:
I had an international sim card at hand and I put it in. Interestingly the APN settings are no longer blocked. But, I do get a notification from setup wizard saying the inserted sim is not from Verizon and some services may not be available. But, messaging still seemed to work and I was also receiving 4G.
Click to expand...
Click to collapse
Oh then yer okay. That message from verizon can be gotten rid of a couple of ways; 1) use adb commands to disable the specific packages 2) use patched Odin and flash a different rom
VZW is the only rom I think that does that, and it's very annoying. I don't remember exactly which packages have to be disabled, but search google and use xda and vzw in keywords and u should find it.
The 2nd option would be my choice. It would do away with vzw crap and with an open rom you may find volte and vowifi will work also.
cheers
Thank you so much for your reply. That sounds great! To just give it a try, I tried putting in a TMobile sim and phone restarted to install software for TMobile. After that the APN settings were unlocked and now I am also able to connect to the internet using my US Moblile sim. The only problem is the the network mode is greyed out.
This rom I think only recognizes network from major telecom providers. So, just flashing with an unlocked rom would just help to unlock all the features and also remove telecom specific crap. I will try to flash it today.
Thank you again!
I also just flashed the stock firmware which is fully unlocked. And there is no bloatware from telecom OEM's. I am now able to use the network and set the APN's, but the Network Mode is still greyed out. Is it possible to know why? I am guessing that if the phone is fully unlocked, I should be able to change the Network Mode. Is there any other info that I can give you to help understand what is happening? I do not see vowifi as well.