Ok here is the thing. I was using TNT5.0 rom on my wizard g4 cid locked. I saw in this forum the XM6r4 rom so i want to give it a try. I was flashing wizard love rom when something happen (electric problem, i guess) the process didnt finish, I reset and turn on my phone, know my phone is stuck on the splash screen, I can enter the bootloader mode but i cant flash the wizard love rom, when I try it i get a 260 error. what can i do??? help me please
Try to flash with your stock ROM (i.e. The original ROM that exactly matches your Wizard and carrier). Then you can install SoftSPL/HardSPL and perform flashing again.
u can also remove hardSPL by instaling nk.nbf file with wanted IPL/SPL using RUU...I've done it. Can u tell what stands for error 260? is it a connection problem or it says u need to change RUU, cause i dont remember all of these errors numbers....
Related
Hi guys, i have little/big problem. I have bricked hermes, SPL 2.03, before with no radio message... when i try to flash some rom, it stucks and restart at 1%, when i try sd card flash, i get red 00062008 error, or 00028002 error. when i was trying official shipped rom, it seems good, until it was flashing radio part, then it stucks... so.. is possible to help? and, is possible to find some shipped rom without radio? KITL is not supported by the phone now... any solution please? even it i can use it as a pda only... thanks very much for quick replies
Do a search on here for a program called Rom Koch. You can pull the radio out of your stock rom. Then reflash and use as a PDA.
Cheers...
Yes, i tried it before, but without success, because if i modify original rom this way, herm doesn't recognize it as a stock rom, but as a cooked rom (even if i set the same cid as stock rom), and i get red error again... this does't work..
Hey guys...Heres a quick run down of whats happened:
Was upgrading to a new version of a custom ROM using SD method like i normally do. Process stuck at the very end forever (hours), so i soft reset. Now phone won't boot past the splash screen, just hangs there.
I have attempted the method "Phone bricked when writing to the Extended ROM" here: http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems#error
But my problem is I cant use mtty because i have SPL 2.03.
How am I able to downgrade my SPL to 1.04 if I can't boot?
Or any ideas as to how i can get passed this an start clean altogether?
(I have already tried hard reset, no go)
Re-install the ROM using sd card method. If you think it could be a corrupt ROM image file, use a different ROM.
Might Work for you.
I had almost the same thing happen to my phone not but two days ago.
The problem I experience with SPL 2.03 after it bricked was that any new or custom Roms i tried flashing to my phone would error out before even starting the process.
What I did, and it worked for me, was to flash over the oldest original shipped Rom for my carrier. You can find it here.
http://wiki.xda-developers.com/index.php?pagename=Hermes_Upgrades
Load the Rom to your SD card and enter the bootloader. If your lucky it will start the process and finish.
Then as soon as its done, before putting a different Rom on there, use Hard-SPL. Here's the link and walk through for it.
http://forum.xda-developers.com/showthread.php?t=296722&highlight=bootloader
Let me know if it works out for ya.
Hello all!
I am in desperate need of some help from you all, and the great rom chefs here.
What exactly happened:
From past 2-3 roms (pandora 1.0, 1.1, PDAVIET-v6,v7) i have been having regular MANILA freezes. it would freeze within 12 hours of flashing, and in the last 2 flashes, it froze within 1 hour, without me installing anything.
Titanium worked fine. untill that started hanging too.
So i tried reflashing the 1.6 official rom, thinking that might clear up some bugs as its the official rom.
while trying to flash it (from my sd card directly) it gave up an error - Invalid DEVICE.
I restarted and went into bootloader again, and then i started getting this error :
UPGRADE ROM CODE ERROR
PLEASE TRY AGAIN
Now i have tried reflashing from the computer, and also from the sd card directly, 1.6 official , pandora 1.1, pdaviet v7, but to no success.
All the time it still gets stuck on that screen.
I have tried hspl'ing it again, it was successful - the hspl procedure, but then still no rom loads onto it.
Even tried using the sspl, but still nothing happens. With SSPL, it shows flashing as 0%, and stays there forever!
PLEASE HELP guys!
in a real bad situation!
Thanks!
so what is the device status currently?
can u boot into a main manilla or titanium screen?
Can you get to bootloader? Were you flahsing ROMs using SSPL or HSPL?
hi..
i dont know if this might work, try to get stock rom, xxx.exe, rename xxx.exe to xxx.rar and unpack it. you should see RUU_signed.nbh and rename to leoimg.nbh. put leoimg.nbh in the root of your sd card. and flash use vol down+power button.
oh, there was a mistake!
When you firstly flashed your device with 1.6 official from sd card, this removed hspl and the device checked your rom's region id. I guess you have used offical roms from other areas. So the process stopped when the device checked the cid.
At this stage, you should find out the offical rom from your area, and re-flash it from sd card, then everything will be fine.
But you didn't, you tried re-hspl and sspl...and i don't know what the consequence will be.
So? Did you get it fixed mate?
Any update? if you haven't fixed it yet PM me.
If it is de wrong region rom you tried to flash do you might need to flash it with a goldcard?
hope you got it sorted
Just flash your original rom using htc ruu will do. been there, done that
yeah flash the 142 or 148 rom that is appropriate for your device.. and use teh exe/ruu that came with it rather than sdcard.
what's the betting you needed the goldcard to flash 161? which is why you're having issues trying to reflash it ?
HSPL
Hi,
You could try this,
1) flash HSPL first.
2) flash the stockrom one more time from storage card.
This will erase hardspl so if you want to flash custom roms again you need to flash HSPL one more time after you flashed the stockrom.
Succes,
Leo
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
_JuSteR_ said:
I have the same problem and I need the official 1.42 rom... do u know where I can find it?
Click to expand...
Click to collapse
Link from Dutty:
http://rapidshare.com/users/258XUJ
Your Leo was probably locked on your operator
at this point You've got to flash HTC official ROM with a Golcard.
Or your operator's rom directly from bootloader.
yep. I'm actually trying to get a gold card...
I've tried to create a gold card and hard reset but the setup fail
00018003
LEOIMG.nbh - FAIL
RADIO_V2 - RSA FAIL
rcust -
bootloader -
splash1 -
os -
configdata -
Update terminate
Update FAIL
Click to expand...
Click to collapse
maybe is the gold card wrong?
_JuSteR_ said:
I've tried to create a gold card and hard reset but the setup fail
maybe is the gold card wrong?
Click to expand...
Click to collapse
Did you try flashing thru boatloader official Rom (from your region) ?
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
_JuSteR_ said:
I tried to install the latest HTC official rom but the setup stops at 9%
"Error [290]: invalid command"
It seems a problem of Radio... not rom...
Click to expand...
Click to collapse
You have to flash 1.43 of your Region thru boatloader. If boatloader does not work thru goldcard.
I tried with italian 1.43 official rom also but the setup keeps stopping... Tried also using a goldcard, created using qmat
Hi, im getting very annoyed with my phone, probably something to do with i don't know what the hell im doing. Basically my phone has lately started to go crazy and constantly reboots, only getting to the orange windows screen. and very rarely boots up. I have the o2 HD2. Ive tried hard reseting..and taking out cards and booting but nothing seems to help. So i spotted the new generic 3.14 rom on the official htc website and downloaded it and thought it would fix it all. But now it wont work, it gets to %100 on the ROM update utility and says '' ERROR 270:UPDATE ERROR - The image file is corrupted, Please check your update utility. Ive downloaded it twice now as it told me as it was corrupt, to download and try again, but its doing the same. Now my hd2 is stuck on the multi colored screen and will NOT boot. Someone please help me, and try to have patience with me as im un-familiar with all this . Someone taking the time to help me would be VERY appreciated. Thanks.
theres a real o2 3.14 rom HERE
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
or you need hspl
Hey Brandon911 after you manage to flash the ROM member samsamuel was kind enough to link for you. If you don't know how to flash the ROM simple put your HD2 in bootloader(tricolor screen) and run the RUU or exe wich ever one it has once you exsrtact/unzip the zipfile. Make sure it says USB in the white bar of bootloader though before you run the updat utility.Anyway once you flash the ROM check your pins that connect to the battery cause I am willing to bet you have been dueing a lot of battery pulls and might have inadvertantly bent one of your pins. I say this cause you said your HD2 was "constantly rebooting".
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Brandon911 said:
i cant flash that rom at all? i try to extract it to my pc and it says its currupt :s ive downloaded it twice now. should i use a different rom? a custom one? And thankyou macgnolia
Click to expand...
Click to collapse
I don't see no real reason you should not try a custom ROM. Just make sure and tbis is very important, if the custom ROM has a radio that comes with it, that the radio is compatible with your o2 HD2. I am also sure when samsamuel gets to read this thread again he will be abale to offer more help, probably better than I.
Edit: You will have to have HSPL flashed to your HD2 to flash a custom ROM.
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
hspl4, supports 3.03. If you want to use magldr you will need to go to 2.08.hspl
Brandon911 said:
im sticking with the generic 3.14 from the htc website. my phone is on SPL 3.03? and to run hspl u can only go up to 2. something so it wont run? sorry guys, your patience is much appreicated. i just need some step by steps on what i should do, in order, for a noob.
Click to expand...
Click to collapse
Did you use HSPL 3 OR HSPL 4You should use HSPL 4.
Obsolete
see http://forum.xda-developers.com/showthread.php?p=19893221#post19893221
id\ did it and my mobile now dont make any response to any kind of action i cant even open it boot it or any thing
noooooooooooooooooooooooo
did you have a stock rom or custom one before flashing ? how did you flash it?
thx in advance
i was using latest stock rom of my country (middle east)
but i used the spl flasher but changed the file with the link in this forum and then every thing went black i cant even press volume down to install a rom or boot any thing cant even charge my mobile
warning
pls dont installllllll my phone is completely brick dont installl people
i swear my phone is now completely brick down
Flash back hardspl or your backup
The old SPL file was corrupt, the first post is updated with a working new SPL.
How to flash this to my phone?
I tried via rom update utility but it can not read the file.
[edit]
obsolete message
Thanks.
This file works with rom update utility.
Great.
Did you find any difference with SPL 1.28 other than the charging animation?
so far no.
You sure that this working? i have flash it 3 times on my phone but still on info is "SPL 1.28"
VirusPlus said:
You sure that this working? i have flash it 3 times on my phone but still on info is "SPL 1.28"
Click to expand...
Click to collapse
Do you have 1.28 HardSPL or stock 1.28?
You should probably flash HardSPL first
I have 1.28 HardSPL, not stock one. I reflash HardSPL tho but still nothing
I'm searching for a way to fix this.
Will keep you posted
[edit]
obsolete message