Related
My Atom stucks in Update Utility mode ! I flash almost roms available ! I can complete but still stuck ! Any idea ? Please help me !!!
1 Remove your sim and sd card.
2 Press "Power" + "Action" + "Soft Reset" to enter the BootLoader
3 Connect to the pc via usb cable
4 Run Atom Upgrade utility again.
don't work
i have the same problem..did you solve your problem? if you did, please tell me how to fix this problem...stuck in update utility screen...
You have only one choice. And that is to return your Atom for repair. Mine was actually replaced with a new one 8)
See here http://forum.xda-developers.com/viewtopic.php?t=50749
xda ii s boot loader mode
Hi iam lok,
Is there any updates on the Boot loader problem.
Regards
Lok
IamGuest said:
1 Remove your sim and sd card.
2 Press "Power" + "Action" + "Soft Reset" to enter the BootLoader
3 Connect to the pc via usb cable
4 Run Atom Upgrade utility again.
Click to expand...
Click to collapse
Guys, dont worry. You have to be patient.
I had the same problem and following O2 Support suggestion
I returned it to their service center .
Now forty (40) days later I a still waiting for something that had a max turnaround of five working days.
take battery out - start update utility and stop at screen before it starts to install.
put battery in and connect to pc and then click continue
worked for me a while ago... i was just listing steps from my memory so i couldve written something wrong there
The steps are not clear :roll: Do you take battery out and connect atom to pc before starting update utiliy?
you take the battery out so the atom shuts down completely
and then you turn it on/plug it in and immediately run the rom upgrade
if you want to solve this problem use anther pc to upgrade your O2 ATtom
because the problem in your PC not pocket ( A atom) .
i had the same problem before i solve it when i change pc
I tried on three different laptops and it still did the same...would not finish flashing radio rom and now stuck in utility update black screen...any other ways to repair this problem?
ok had this happen to me a few times, seriously cant tell u what worked but keep trying to do soft boot and boot loader, and battery removal and reboot the computer, then try update again...
Each time it happened to me i had to try and try and after a while (maybe its a time thing) it worked amazingly enuff.......i was told to take it back to store, but perserverance won out!!.....
i figured if i have to take it back i have nothing to lose so i tried all the solutions and eventually it responds........
Good luck..
I hope this helps.
I've been fighting with my Atom for a few days and found a fairly reliable solution for the failure to complete the upgrade. I take out my SD card remove the Battery and the SIM, replace the battery and the unit goes into Update Utility. I then connect it to my PC and the USB connected appears on the Atom screen.
I am then able to run the upgrade utility at which point my Atom was previously running. In my case the upgrade that was released in February Xda-Atom-ENG-20060123.exe, this runs through without issue and my Atom is installed cleanly again.
Running a subsequent upgrade, it hangs again in the Update Utility again, but I can restore to the previous version successfully and have done repeatedly.
NeilB said:
I hope this helps.
I've been fighting with my Atom for a few days and found a fairly reliable solution for the failure to complete the upgrade. I take out my SD card remove the Battery and the SIM, replace the battery and the unit goes into Update Utility. I then connect it to my PC and the USB connected appears on the Atom screen.
I am then able to run the upgrade utility at which point my Atom was previously running. In my case the upgrade that was released in February Xda-Atom-ENG-20060123.exe, this runs through without issue and my Atom is installed cleanly again.
Running a subsequent upgrade, it hangs again in the Update Utility again, but I can restore to the previous version successfully and have done repeatedly.
Click to expand...
Click to collapse
Hello neilB. Could u, or anybody, tell me where I could find ROM such as yours? I wanna try it to my Atom. Perhaps, God helps me, I could "cure" my Atom which is stuck at "Update Utility" and when I flash its ROM, never pass stage 5.
Thanx in advance. i really appreciate it.
helllo everyone...
i have a same problem..my atom is stuck on update utility screen..
dunno wat to do... i'm tryin to reflashed again..but it stooped at step five..'burn radio stack"..
i've been tested flashed it with another rom..
really appreciate any help..
kubo_yosiharu said:
helllo everyone...
i have a same problem..my atom is stuck on update utility screen..
dunno wat to do... i'm tryin to reflashed again..but it stooped at step five..'burn radio stack"..
i've been tested flashed it with another rom..
really appreciate any help..
Click to expand...
Click to collapse
Please go through this I had the same problem, but remeber to follow the instructions precisely as if u do not follow the same procedure u will not be able to correct the problem:
http://forum.xda-developers.com/showthread.php?t=358442
Hi Mods and all
I am new in this forum .... and new with PDA in general ,.. although i have experience in regular cell phones ,,,
I have come up with an issue that i need help with from you guys who seem to be experts...
I have an XDA Atom which turns on upto O2 screen and freezez right there .. i tried to hard reset the phone but failed..
When i press power on and reset button .. screen asks me to press green and red key when i do it says clean boot .. and than do u want to reset your phone ? and than after that i tried to press all keys but nothing happens ,,,
I dont know wht is the problem but i think or assume that i have lost bootloader and or Rom ,,, Please help with this part
Also what tools do i use to flash what i have to flash as the PDA cannot connect with the USB becuase it is not turning on ,,, Please help with this part
Also what do i need to flash to this phone to revive it ,,,? please help with this issue ,, and where can ii download this files ,,
please explain step by step and or direct me to a link where i can geet this information
thank u in advance ,,,
Mike
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Drat. Got to this one too late. Sorry
Anyways, the Atom does have the tendency to lose track of its own extended ROM (You can actually see this happening if you use the WM5 hidden storage revealer - which ironically happens to cause the problem sometimes as well).
Symptoms include:
- A phracking long boot time (>7 minutes, seems to hang)
- Screen goes out of alignment
- Camera, Autoconfig, Equalizer don't work.
- Hard reset doesn't help.
- EXTROM info is missing from device settings (shows as blank) - tho sometimes the device works without this anyhoo.
- CMOS version is also missing (the device definitely won't work in this case)
Probable cause:
- Someone or something just tried to write to your hidden storage root. (Eh?)
Far as I know there's no method to recover other than flashing your phone again. Just one of the design flaws of the Atom, I guess...
(Yes, I feel for you. I had to solve this myself too, and I didn't want to send it in. Thankfully, this isn't a common problem. )
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
would you plz tell here which rom u used for this ????????
Well, my Atom Exec will do the same sometimes.
But the following method works everytime!!!
Take out the battery. Charge it with a charger until full !!!!
Put it back to the machine, it works every time !!!
Or you may try just charge it in the machine for a few hours and see if that works. Since I always have a spare battery charged, every time that dumb thing stuck, I just changed the battery and it waked up again.
mun66 said:
Thanks for not replying ... but finally i managed ..downloaded the latest version of ROM and put the phone in flash mode by holding camera and reset key at the same time and flashed it ,,
make sure Battery is full ..
Now phone working just fine ..posted this for some other newbie like me
regards
mike
Click to expand...
Click to collapse
Hi mun66;
I've got the same problem with my Atom. But I dont know how to flash the phone like what you mentioned. Could you plz show me step by step??
Thanks,
Your ATOM Exec
edunon said:
I've just downloaded the latest Rom from seeo2.com hongkong and I had the very same problem.
My XDA Atom Exec is frozen at the O2 screen.
mun66, if you read this, could you explain how you fixed it?
thanks.
Click to expand...
Click to collapse
You guys just need to go into bootloader mode before performing an upgrade. For the XDA Atom just press Power+Dpad(center)+stylus reset momentarily, and its now in bootloader mode. RUN again the Update program. If you still experience the same thing, the update file you downloaded might be corrupted. You have to download again and flash your device again.
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
wilak81 said:
Mine is still stucked in O2 though done all of the above ways,
got the new ROM and flash it, but still stuck in it.
PLS HELP ME GUYS!!!
Click to expand...
Click to collapse
You might want to send it in the the service centre for a check, just in case it's a hardware problem.. If you still face the same issue even without installing any software..
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
wilak81 said:
That's probably a good idea, but i'd like to try some tricks on many threads before.
And also I've heard that O2 service center are not cool
Click to expand...
Click to collapse
Do keep us posted..
I will face the same problem if i install too much programs.. I guess it's either Pocket Plus, Diary 2 which is causing my problem.. Now wondering if i should change to Atom Life, since they announce WM6... If only there's a perfect phone.
Thank God, it's working after 5x flashing but it still had bug.
I still have to take the battery off for at least 15 minutes if I try to reset the Atom.
Sure 1 thing for ATOM, IT SU**S!!!
i have a friend also has a trouble like this ,but he has solved the problem when he charged the exec. do not you have a try ?
I just picked up one of these to play with.
Mine gets by the O2 screen but if I have a few apps on it it loads the Today screen but then freezes and won't let me access anything either by hard key or screen. Soft reset just repeats the cycle.
This is with only around 4 apps loaded. One of them must be a culprit?
By the way, it came shipped with WM6.0 (ROM: WWE_RC2170507B2).
Hi Guyz
I'm trying to upgrade my friends O2 ATOM to any new software .
the problem is that when it reaches RADIO UPDATE
it stays on 0%
PDA Screen says ( UPDATE RADIO STACK ,,,, PLEASE WAIT ... )
IF I REMOVE THE USB CONNECTION , THE ATOM STICKS ON WINDOWS SCREEN , AND SOMETIMES ON SCREEN ALIGNMENT .
i tried three different roms ad got the same result , even thru BOOTLOADER screen, it is very imbarresing , as i promised him a better performance device , now it is not booting .
hhhheeeellllppppp
pleaseeee
he is looking at me and only flames are showing from his eyes
just keep flashing the device, it fails sometimes on the first flash at the radio section, simply disconnect it and then reflash it for the 2nd time.
How long you've wait the process?
I've upgrade my atom more then 10 times and when in Radio Updates it's also not showing the progress as what you've seen.
But it doesn't mean the process is stopping. Just wait and the process will finished. (Usually in it shows the progress in your PDA screen)
Don't unplug your usb cable before it finished.
unfortunatly i had to unplug the ATOM
now it gives only one massege
UPDATE UTILITY
did i brick it ?
for me, I'd take out battery a while and then connect USB and try to flash with wm5 rom like "Xda-Atom-ENG-20060105" (you can found on this forum under "Collection of All O2 XDA ATOM ROM AKU *** (WM5(2*->3*) & WM6 (0.3*->0.7*))" post).
And then upgrade to wm6 rom by ... jiggs, homer285 & udayrulz .....
hi konanda
will this resolve the problem?
yeah, I have done alot of time to solve this problem on other xda atom also .... if you want, I'l upload this wm5 rom on mediafire ....
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Just keep flashing the device.. take a bit longer time and then will complete the updating ....
abuawab said:
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Click to expand...
Click to collapse
Allow the projected 30 mins for the update, if you plan to update via SD Card be sure to read, ALOT! good luck, oh you could have a little read in the Atom Wiki too.
could be your cable or connection?
ATOM ROM update problem
I had the same problem & tried different ways explained in this thread.
No success.
I tried with old original ROM and all new ROMs as well, it stucked on updating RADIO BURN message on computer and ATOM displays Updating RADIO STACK.
I tried removing battery and kept for some times and tried back but same result. Please anyone can help me
i had this problem also. i was unable to reflash my atom. It stuck at the same screen as what the previous user described. At first, the touch screen failed and there isnt any GSM, as in under wireless manager, "phone" isnt there.. E.g There should be Wifi, Phone and Bluetooth in wireless manager.. But sometimes after some soft reset with the taking out of battery, the gsm comes back together with the touchscreen. But this occurred quite frequently until i decided to re-flash it.
Im using the official rom of Xda-Atom-ENG-20060426-MOT0822.. Is there any way to solve this problem?
Thanks in advance.
max20041988 said:
i had this problem also. i was unable to reflash my atom. It stuck at the same screen as what the previous user described. At first, the touch screen failed and there isnt any GSM, as in under wireless manager, "phone" isnt there.. E.g There should be Wifi, Phone and Bluetooth in wireless manager.. But sometimes after some soft reset with the taking out of battery, the gsm comes back together with the touchscreen. But this occurred quite frequently until i decided to re-flash it.
Im using the official rom of Xda-Atom-ENG-20060426-MOT0822.. Is there any way to solve this problem?
Thanks in advance.
Click to expand...
Click to collapse
try to update to any WM6 or if you still want the WM5, there are a lot of ROM
's available. I had this tradgic experience aswell with o2 default ROM. Im contented with the WM6 although no a2dp support yet =)
abuawab said:
thanx
i tried this way 2 , but again it sticks on 0% , with a massege saying , UPDATE DADIO STACK PLEASE WAIT ...
any suggestions?
shall i go to SD card way ?
Click to expand...
Click to collapse
i'll agree with the others, better change USB cable as well =) It could be faulty you can use cable from canon digicam/motorola phones et. al.
I would suggest reflashing the ROM with cooked ROM's available here like WM6 or WM5 if you still want to stick with it. o2 default ROM gives me a headache before. No1 rule before upgrading ROM...... Read the WIKI hehehehe
Hey guys I had the same problem, I went through the procedure as here http://forum.xda-developers.com/showthread.php?t=358442
Hope u can also flash 'OS+EBoot' part of it and then after ur Atom Exec restarts u can go in bootloader and flash the original WM5 from O2 ‘Xda-AtomExec-ENG-20060614_R060428N_EX0028.exe’.
please can someone HELP me by sending me the instructions how to restore dead bootloader on my O2 atom life after a failed WM6.5 upgrade.
the device is not switching on, not entering bootloader screen.
when the battery is inserted and charger connected, orange led light is lit
PLEASE HELP, i love my atom life
pblair said:
please can someone HELP me by sending me the instructions how to restore dead bootloader on my O2 atom life after a failed WM6.5 upgrade.
the device is not switching on, not entering bootloader screen.
when the battery is inserted and charger connected, orange led light is lit
PLEASE HELP, i love my atom life
Click to expand...
Click to collapse
Please describe what you can see now in the screen of bootloader.
I think I've faced the same problem on my Atom Life before(my device has been dead(due to flashing error), but then cured by myself)... Maybe I can help.
check the site's wiki
there should be something about this.
additionally, have you tried the mini sd card flashing method (you can enter it's bootloader by holding the camera button - if thats the bootloader you're not talking about)
help me to revive my dead o2 atom life
my o2 atom life is not going in bootloader mode after mismatch rom upgrade(it has complete black sceen, i tried all buttons and battery remove and reinsert). please help me
you bricked your device .... try to open the device and remove this "cmos" battery
TRY THIS
manmohan0339 said:
my o2 atom life is not going in bootloader mode after mismatch rom upgrade(it has complete black sceen, i tried all buttons and battery remove and reinsert). please help me
Click to expand...
Click to collapse
hi manmohan
First thing Dont Panic. There could be several things which might be responsible together making things difficult and confused.
1) Battery have not enough power.
2) Rom installation failed in the middle due to ROM file corruption.
Possible solution (Worth trying out)
----------------------------------
1) For first thing to confirm. Keep battery on charge for 1 hour though nothing is on screen. This will charge no only the main battery but also the internal CMOS battery, which is important. The redlight of charging will show that phone hardware is charging your battery. You are done with BATTERY.
2) Download fresh copy of any compatible rom on your pc. Connect any USB CARD-READER to your PC. Format SD Memory Card in FAT format (also known as FAT16) on your pc. Be sure the card is less than 2GB. If its 1 GB it is better. Copy the AL1.DIO file on SDCARD. You are done with SDCARD.
3) Try installing ROM exactly as mentioned in this THREAD
4) If still this fails, that means your battery is not yet fully charged or not working properly. Go to any mobile shop and ask them to charge the battery to full with thier charging unit and again start from step 1. Also ask the mobile technician if your battery is fine or not.
If battery is above 70% and card is FAT and ROM file is not corrupted, the installation again will go fine and you will be with your mobile again.
THIS MAY HELP, I M NOT SURE, BUT WORTH TRYING OUT THESE BASIC STEPS. HOPE THIS HELPS.
BEST OF LUCK...
Mahendra C
Mumbai, India
can you tell me the steps you took to cure your atom life.....thanks for your help
aa125690 said:
Please describe what you can see now in the screen of bootloader.
I think I've faced the same problem on my Atom Life before(my device has been dead(due to flashing error), but then cured by myself)... Maybe I can help.
Click to expand...
Click to collapse
i am not getting to the boot loader screen at all. when i press the power button, it phone doesnt power up.
when i connect charge...the amber light blinks and when remove charger its the same until battery runs out.
greatly appreciate your help
pblair said:
i am not getting to the boot loader screen at all. when i press the power button, it phone doesnt power up.
when i connect charge...the amber light blinks and when remove charger its the same until battery runs out.
greatly appreciate your help
Click to expand...
Click to collapse
Try charging your battery until the amber light turns green (it means it is fully charged).Then try to do a hard reset (pressing the power and reset button simultaneously). It will bring your phone to the last ROM that was installed.
Dear ManMohan
No need to send private emails. May be you are assuming most of us as mobile hardware experts but trust me many of us are not. I am just trying to help.
I am sure, you are very near to solution which you can do on your own. And yes, discussing all this in forum, will help many other people too now and in future, than in private emails.
--------------------------------------------
Try to find Original ROM from O2 website here http://www.myxda.com/romupgrade.aspx Select Atom Life and download Rom Installer for XP version and VISTA version both. Write them on blank CD for future reference, just in case you may need in future. DOWNLOAD THEM AS SOON AS POSSIBLE BEFORE THEY CLOSE THE SITE AS O2 IS ALREADY TAKEN OVER BY MWG (www.mwg.com)
Try installing this official ROM from your PC with this installer, while your O2 Atom life connected to PC with USB Cable. Even this method also restores many phones from boot error.
Hope this helps. Best of luck.
Mahendra
same problem
I have the same problem. what happens is that i include eboot.nbo in the mini sd. when flashing is done, i have a dead set.
searching for jtag what I found is that the software out there that is compatible for exec and flame. when used with life will result with errors.
also trying some key combinations but never come up with flashing/boot screen.
same problem
asunta said:
I have the same problem. what happens is that i include eboot.nbo in the mini sd. when flashing is done, i have a dead set.
searching for jtag what I found is that the software out there that is compatible for exec and flame. when used with life will result with errors.
also trying some key combinations but never come up with flashing/boot screen.
Click to expand...
Click to collapse
hi,
can you give photo showing jtag poins for atom life and how to prepare its cable, i want to try for my dead atom life.
juliuscezar said:
Try charging your battery until the amber light turns green (it means it is fully charged).Then try to do a hard reset (pressing the power and reset button simultaneously). It will bring your phone to the last ROM that was installed.
Click to expand...
Click to collapse
i charged for 3 days and the orange light just keeps blinking...do you have any more ideas i could try
aa125690 said:
Please describe what you can see now in the screen of bootloader.
I think I've faced the same problem on my Atom Life before(my device has been dead(due to flashing error), but then cured by myself)... Maybe I can help.
Click to expand...
Click to collapse
after charging phone....i remove the battery and replace and when i press record+camera buttons + power and reset the orange lights comes....does this info help in you helping me
Yap Atom Dead bootloader is very annoying
Almost 1 year my Atom life dead or brick.I already Searched even to Service Center in our country and Atom central service in Singapure and china but none of them can fixed this this problem. They Said : "The Only way for fixing this brick atom life just Replace mother board".The Atom which has dead bootloader can not fix with Just press whatever button in your atom or even install New ROM.Cause the one of term for installing the new rom to The ATOM life is port must be detected by USB Computer port.But in this condition your atom life nothing detected by USB Port computer.Reasonly you can not nothing to do.But FYI if you have contact person in China precisely in Quanta Computer Manufacturer especially in Maintenance or engineering, I think there's only hope.But In the world there's nothing imposible to do.Until now I am still keeping my brick atom dead life, waiting someone can solve this problem. many thx.
jtag
blankavail2009 said:
Almost 1 year my Atom life dead or brick.I already Searched even to Service Center in our country and Atom central service in Singapure and china but none of them can fixed this this problem. They Said : "The Only way for fixing this brick atom life just Replace mother board".The Atom which has dead bootloader can not fix with Just press whatever button in your atom or even install New ROM.Cause the one of term for installing the new rom to The ATOM life is port must be detected by USB Computer port.But in this condition your atom life nothing detected by USB Port computer.Reasonly you can not nothing to do.But FYI if you have contact person in China precisely in Quanta Computer Manufacturer especially in Maintenance or engineering, I think there's only hope.But In the world there's nothing imposible to do.Until now I am still keeping my brick atom dead life, waiting someone can solve this problem. many thx.
Click to expand...
Click to collapse
I am building jtag hardware. I will try to flash boot loader using linux taken from this site.
HTML:
http://www.nrs.pt/pub/projects/acuv2/doc/mel-colibri/html-chunk/mel.bininstall.html
It is also possible to use windows, but some parts of the program is missing. Still, I am having a hard time to build the jtag hardware, taken some parts from nokia dct3 flasher.
Had the same problem and after about 15 days of its brick status I took it out and charged and after 100 % charged installed the official "Xda_Atom_Life_WM6_WWE_RC2140907B2" and then subsequently the PDAVIET ROM 6.1 with AL1.DIO.
can you explain the procedure in detail.?
Carbideman said:
Had the same problem and after about 15 days of its brick status I took it out and charged and after 100 % charged installed the official "Xda_Atom_Life_WM6_WWE_RC2140907B2" and then subsequently the PDAVIET ROM 6.1 with AL1.DIO.
Click to expand...
Click to collapse
please explain in detail, how did you repiar it ? where you able to go in bootloader mode?
JTAG
asunta said:
I am building jtag hardware. I will try to flash boot loader using linux taken from this site.
HTML:
http://www.nrs.pt/pub/projects/acuv2/doc/mel-colibri/html-chunk/mel.bininstall.html
It is also possible to use windows, but some parts of the program is missing. Still, I am having a hard time to build the jtag hardware, taken some parts from nokia dct3 flasher.
Click to expand...
Click to collapse
I think the problem not from the JTAG Software.Officially Intel PXA 270 can be flashed by reguler flasher software with jflashm or even HJTAG and I already read detailly in the intel section site,but we can not find the right position so we can not flush directly eboot this processor.Now I am unfolding this atom for searching The right JTAG Position.But I don't know how identify this jtag point.In this side board there are many point, I think I must try one by one, do u have any idea?
help
i also have same problem... my atom life brick...i cannot power on at all.. nothing appear on the screen... i have done the charging tricks.. please help me
I was upgrading my o2 xda atom ,but the connection was lost and now it doesn't works ,no boot loader ,no windows ,it's just can charging ,pls HELP!!
rezident185 said:
I was upgrading my o2 xda atom ,but the connection was lost and now it doesn't works ,no boot loader ,no windows ,it's just can charging ,pls HELP!!
Click to expand...
Click to collapse
Check this thread out to see if it helps :
http://forum.xda-developers.com/showthread.php?t=610160
Otherwise you will have to go to wiki side and search.......or here:
http://forum.xda-developers.com/showthread.php?t=336278
Good luck.
Vincent
first doesn't help ,second is to difficult i haven't skill do to it
now mobile turn on only for 10seconds max,battery is new,and when I buy it he tourn off when was 50-70% and write that battery is low,help!
rezident185 said:
now mobile turn on only for 10seconds max,battery is new,and when I buy it he tourn off when was 50-70% and write that battery is low,help!
Click to expand...
Click to collapse
Can you now get into bootloader mode? If can, think you need to reflash, you can try going back to the last available OEM ROM at www.myxda.com and choose download ROM and select Atom. There is instruction to flash there. If you can get that far, then only consider flashing other cooked ROM. As far as Atom is concern, there is ONLY WinMo5 available, nothing higher.
Good luck.
Vince
vincentshjuan said:
Can you now get into bootloader mode? If can, think you need to reflash, you can try going back to the last available OEM ROM at and choose download ROM and select Atom. There is instruction to flash there. If you can get that far, then only consider flashing other cooked ROM. As far as Atom is concern, there is ONLY WinMo5 available, nothing higher.
Good luck.
Vince
Click to expand...
Click to collapse
no I can't ,it's turn on just for 1-2 seconds ,then it off