My SPV C550 suddenly hanged.I restart it by removing the battery.After reboot, it now only showing desktop with battery icon,signal strength indicator and the Unlock button(soft key) with Windows Mobile screen logo.I tried Hard reset, which cannot complete succeessfully.It also can't connect to Active Sync.
I also tried to flash the ROM from SD card,but it can't allow update because
my phone doesn't have a SuperCID.i unable to change CID because both SPV-Services and pdocread.exe need Active Sync connetion to work.
I searched all the forums,but didn't find any solution how to change CID without Active Sync.
Please help.
Try to reinstall ActiveSync
Related
Hello!
I´m new in this forum
yesterday i have searched a program to sim unlock my MDA Vario II and i´ve found the Sim unlocker V2a.
Now i have the problem to upgrade the Rom of the PDA with original T-Mobile AKU 2.0 Rom. i always get the error 224 - can´t find device.
is it possible to change supercid to cid (back) and use then the unlocker v3?
thank you for help!
Thomas
(austria)
that means it can't find your device... so either you haven't connected it to the computer, or Activesync is disabled.
in normal use, can you synchronize with active sync? is this connection OK? because some time ago I had a problem with firewall (http://forum.xda-developers.com/showthread.php?t=296010&highlight=active+sync), because active sync using RNDIS network, and this network is also controlled in firewall. try to disable any protection, and run RUU again. or hardreset device, when I play with registry and CAB fix´s I have also this problem, I can connect, but cannot synchronize any data.
Yes - i can normally syncronize with active Sync.
To disable the Firewall i have just tested
Hardreset of the device i have already tried.
Another question:
is it possible to go from Supercid back to Cid (only unlock SIM)??
Thank yoi
Three days back,my SPV C550 suddenly hanged.I restart it by removing the battery.After reboot, it now only showing desktop with battery icon,signal strength indicator and the Unlock button(soft key) with Windows Mobile screen logo.I tried Hard reset, which cannot complete succeessfully.It also can't connect to Active Sync.
I also tried to flash the ROM from SD card,but it can't allow update because
my phone doesn't have a SuperCID.i unable to change CID because both SPV-Services and pdocread.exe need Active Sync connetion to work.
I searched all the forums,but didn't find any solution how to change CID without Active Sync.
Please help.
I had a similar problem with mine. The screen is the same as yours only varying with the sim card removed to a sim missing logo. Also mine makes the error/message noise repeatedly for a phew secoonds every half hour or so.
I just gave up in the end and admitted it was a brick
and the saga continues
Well the TyTn has died and I'm still waiting on a refund on a dodge wizard so its time to dig out the old SPVs I have a working Tornado (the right soft key has packed up thats a little annoying) so am trying to revive this hurricane.
I have linked some pictures of what is dose display and as you can see it will load into boot loader but due to not being ably to unlock it I cant flash any of the roms I have found.
I have been trying to fix this now for well bloody ages on and off but a good straight 12 hours just recently and to no avail.
In short I need a way to unlock the phone without active sync. The only way I can think of being able to do this is with some kind of specific software through boot loader
Any ideas?
HELP PLZ DEAD SPV c550 During WM6 Upgrade
i hv made a mistake while upgrading my spv c550(HTC Hurricane) to wm6.
i have flashed the wrong spl SPL 1.01.0109 on my fone. that spl was of htc typhoon.
now my phone is not booting up.
when i press the power button the fone gives the white disply and nothing else happens.
i cannot even get into bootloader.
the charging function works when the fone is turned off.
when i turn on the fone it dos nothing not even chaging.
is there any way to get my old fone back...
help plz
i shall be very thankfull to you.
Hi all, first of all I am no geek, I would like to unlock my HTC TYTN so that I may use other sims while abroad etc. I have read the instructions, downloaded v£a of the Sim Cid unlocker, however every time I run the unlocker my phone shuts down and reboots. I have tried with the phone without sim with none network sim with Orange sim same result phone shutys down and reboots. I have tried waiting till it is connected via active sync after rebooting but it nust keeps rebooting. I have even manually loaded the hard spl and run it on the phone but my phone shuts reboots and the spl has not been updated. Can anyone tell me what I am doing wrong?.
Thanks in advance Jimmy
info on device status tytn on orange
I have kept trying but still the phone keeps rebooting everytime I try to unlock. Device status uis as follows
operator version 24.181.1.612
ROM version 1.81.61.2 WWE
ROM Date 09/20/07
Radio version 1.27.12.29
Protocol version 22.45.88.07W
does any of this indicate I would have a problem using current unlock version 3a?.
Thanks in advance Jimmy
Check to see if the SPL has changed... Go to bootloader - hold power, OK above flywheel and reset with stylus. hold until tri-colour screen comes up. It will tell you your IPL and SPL.
It may already have flashed and that means you can update your rom with more safety.
Do you get any errors when running the pc? For instance [error 260](pretty common).
If that error keeps coming up you need to COMPLETELY remove activesync and then reload. All sync relationships MUST be deleted too. That fixed mine
Cheers...
Hi,
I'm a french beginner and I tried to update my HTC x7500 to the radio v1.58.
At the screen of my PDA, it display "Loading...", and I can do nothing because the USB connection doesn't work anymore.
What Can I do?
I have already try a hard reset by press Volume down and reset and I have always the same message at the screen "Loading..."
Also I 've forgot to use "AthenaUnlocker.exe" before my upgrade.
Thanks,
Alex
I found the solution
I found the solution, I removed the battery and after a few minutes, I restart my PDA and do a hard reset.
Alex+
Hello Everybody,
My mobile at&t 8525 alias HTC 8525 is stuck in windows operator logo.It would not boot further. It happened while I tried to upgrade it from Windows 5.0 to Windows 6.0.First I got a tri-colour screen,but in a hurry I tried to backgrade to windows 5.0 again.
Other problem the mobile cannot be synced. I have installed Microsoft Active sync 4.5. Even then it could not be synced.
I tried to read all the posts ,but could not understand anything.
So please help me in getting my mobile repaired
Don't worie.
I had somewhat the same issue with a bad ROM flash.
Just disconnect the USB and boot to the bootloader screen (the tricolour screen) and you should be able to reflash the phone again.
Problem in syncing the mobile
I am not able to sync the mobile to the laptop.I have installed Microsoft Active sync 4.5. Even then it is not syncing.So how could I run the hermes upgrade if the mobile is not helping.
Please help
In Activesync on PC - Untick "Allow USB Connections".
Put the Hermes into bootloader (tri-colour screen) and connect by usb. Run the RUU_Wrapper.exe file you want. Follow onscreen instructions.
You need to have installed Hard SPL V7 for this to work...
did not work
Hello Boss
I tried to follow the procedure you suggested me. but it did not work. I tried with Hard SPl 7.0.
Please give me some suggestion
you dont need an active sync connection to flash it. Enter bootloader(tri colour screen) as you were told in the previous posts and Just click on the boxes that you do have a connection(even though you dont) and then flash the rom.
@ultramag69 i hve never had to untick allow usb connections and i have cocked up loads of rom flashes, saying that i have never had a problem flashing in vista either so maybe i am lucky
If you still cant flash doing it this way, then maybe you should try flashing from sd card instead, just make sure the battery is fully charged. Full instructions of how to do this are found in the hermes wiki, which i advise you to read anyway.
Oh and good luck anyway, you should be able to recover the phone from this ,so i wouldnt fret too much
Guess he isnt hardspl'ed... then his batt is death... must to flash a shipped rom.
correct me if im wrong.
Problem with upgrade At&T 8525 mobile
Hi!
I'm having problems with my Cingular 8525, after I made the upgrade to WM6.1 (FARIA-R32-XDA2_WM6.1.rar) for WM 6.5 (FCWs_stock_like_6.5_v3.rar), and slowed my device does not work anymore. He died.
I need help please. How resurrect it?
Excuse my English.
english is not the problem here cause we need more info... device info SPL IPL hardSPL? you go from 6.5 to 6.1?
Do you try to flash first the Stripped?
Does your batt has charge enough to boot?
There are many many things to say so... start to tell us all your history!
Hi
I tried to Hard spl with Hard Splv7. But I got a error. I even tried the Sd Card method.Its says loading and I get the tricolour mode. If I press the Power button its not showing the status of upgradation.
Where can I get a shipped rom. Actually my Spl is 1.11.
Hi
I tried to Hard spl with Hard Splv7. But I got a error. I even tried the Sd Card method.Its says loading and I get the tricolour mode. If I press the Power button its not showing the status of upgradation.
Where can I get a shipped rom. Actually my Spl is 1.11.
check the wiki pages for your device in the upper bar of this web forums
there are many official roms.
I also am currently using an 8525 (Herm100). It was received from an Ebay deal with WM5. I flashed it with the ATT OEM WM6pro (aka shipped wm6). Once it hit the three color boot screen, it sat on that for a couple of minutes then started cooking. Once it showed a progress bar, it took about 3 minutes to cook the WM6 over the WM5. It also showed a popup that stated going back to WM5 was not an option.
I would suggest running the installer again and going down to 7-11 for a refreshment. You may not have let it percolate long enough to set itself up for the actual ROM overwriting.
gorkalraghavendra said:
Hello Everybody,
My mobile at&t 8525 alias HTC 8525 is stuck in windows operator logo.It would not boot further. It happened while I tried to upgrade it from Windows 5.0 to Windows 6.0.First I got a tri-colour screen,but in a hurry I tried to backgrade to windows 5.0 again.
Other problem the mobile cannot be synced. I have installed Microsoft Active sync 4.5. Even then it could not be synced.
I tried to read all the posts ,but could not understand anything.
So please help me in getting my mobile repaired
Click to expand...
Click to collapse