Related
After some problems with latest rom from gullum Prophet Touch Xb(system reboot and white screen after reboot) i´ve tried to flash pda viet step one rom.But my phone don't turn on.i´ve tried the charger trick but I can´t get the bootloader mode,but when I remove the plug from the main charger or the battery the screen blinks.
Anyone can help me?
Thanks
remove your battery,sim and storage card.plug battery again,turn on.if it do not work,u can use reset button
biokiller said:
remove your battery,sim and storage card.plug battery again,turn on.if it do not work,u can use reset button
Click to expand...
Click to collapse
Hi thanks for your reply.
I have tried all buttons combinations but they don't work.
try a hard reset?
1. hold the camera and connection button on the side
2. do a reset (pen in hole with buttons still held)
3. wait five seconds then press green phone button
this fixed mine
Hi,
Does red led blink when you plug in the charger?
igord said:
Hi,
Does red led blink when you plug in the charger?
Click to expand...
Click to collapse
Hi,
I got the red blink when I plugged mine, whats mean that?
Mine is stucked in the three color screen, I cant do anything.
HAWF said:
Hi,
I got the red blink when I plugged mine, whats mean that?
Mine is stucked in the three color screen, I cant do anything.
Click to expand...
Click to collapse
1. I do hope that your battery is not flat.....
2. FORCE your prophet to bootloader (3 colors) mode MANUALLY, not stuck 3 color,
3. when it turns into 3 color, plug your prophet to PC, you SHOULD SEE that " USB " at the left bottom of your prophet,
4. flash PVtemp,
5. your device will end up with WM5 wwe , then flash WM6........ go to my thread man~~~~ in
my signature....
hi bad news today while i'm flashing the prophet he stucks on boot loader
then the prophet dont start's, sometimes it starts it stuck in boot loader and then is deaed again what's up guys help me please
G40 said:
hi bad news today while i'm flashing the prophet he stucks on boot loader
then the prophet dont start's, sometimes it starts it stuck in boot loader and then is deaed again what's up guys help me please
Click to expand...
Click to collapse
Hey~~ sound like bad battery ~~~~~
low battery ...thanks
G40 said:
low battery ...thanks
Click to expand...
Click to collapse
hi to all member & thanks for read my post
plz any one tell me i have e ten m600 i cant flash it isnt showing rebot
i have try to for mat it lot of time but i cant plz
any one tell me how to flash & how to do the job my e mail is
[email protected]
hey guys,, I did a foolish thing and now i'm stuck!!!
I did the HardSPL thing(apparently wrong!!)
and then i started using RUU flashig the new rom
so now from my SPL on the boot screen i get that the hardSPL didn’t function, and its stuck in boot loader with old SPL
and now that i've flashed the new rom, i cant hardSPL again,,,,
I'm so stuck,
i guess i can flash AKU 2.2 and then hardSPL again,
does it gonna work?
is there anyyyything i can do?
plzzzzzzz
IPL 2.20.0001
SPL 2.20.0001
thom_yorke said:
hey guys,, I did a foolish thing and now i'm stuck!!!
I did the HardSPL thing(apparently wrong!!)
and then i started using RUU flashig the new rom
so now from my SPL on the boot screen i get that the hardSPL didn’t function, and its stuck in boot loader with old SPL
and now that i've flashed the new rom, i cant hardSPL again,,,,
I'm so stuck,
i guess i can flash AKU 2.2 and then hardSPL again,
does it gonna work?
is there anyyyything i can do?
plzzzzzzz
IPL 2.20.0001
SPL 2.20.0001
Click to expand...
Click to collapse
try the ................................
ok, let me know about this ( i've found at WIKI )
Prophet Hard Reset Procedures
How to make a PROPER Hard Reset?
Method 1:
1. Press Camm & Comm button simultaniously. Keep them pressed.
2. Punch the little hole at the bottom with the stylus for a second or two.
3. Release the stylus (keep the buttons pressed!)
4. A white text-message appears on a black screen, telling you to press the send button
5. press the green button(the one you press to make a call).
6. Now, release the Camm & Comm buttons
7. The message on the screen tells you some more about formatting.
8. Release every button, you are done!
Done.... I had done untill number 3.
But a strange at number 4 and 5 !
I stand push Cam and Comm button while pressing green button, but nothing happen !!
Did I do wrong thing ? When I release Cam and Comm THEN I press green button, there is a massage that format FAILED !!!
plz give me a hint for this one ...
cheers,
ermen
ermenzegna said:
ok, let me know about this ( i've found at WIKI )
Prophet Hard Reset Procedures
How to make a PROPER Hard Reset?
Method 1:
1. Press Camm & Comm button simultaniously. Keep them pressed.
2. Punch the little hole at the bottom with the stylus for a second or two.
3. Release the stylus (keep the buttons pressed!)
4. A white text-message appears on a black screen, telling you to press the send button
5. press the green button(the one you press to make a call).
6. Now, release the Camm & Comm buttons
7. The message on the screen tells you some more about formatting.
8. Release every button, you are done!
Done.... I had done untill number 3.
But a strange at number 4 and 5 !
I stand push Cam and Comm button while pressing green button, but nothing happen !!
Did I do wrong thing ? When I release Cam and Comm THEN I press green button, there is a massage that format FAILED !!!
plz give me a hint for this one ...
cheers,
ermen
Click to expand...
Click to collapse
4.1 release all buttons now,
( cancel step 6.)
OK???
dioxda2 said:
4.1 release all buttons now,
( cancel step 6.)
OK???
Click to expand...
Click to collapse
YES !!! I got message FAILED !.
ermenzegna said:
YES !!! I got message FAILED !.
Click to expand...
Click to collapse
what failed??????
1. insert stylus into the little hole (or press power button if your pda turned off) then release
2. immediately press both camera + comm buttons at the same time, wait..
3. on the black screen when you see that question (are u sure u want to format bla bla.. yes or no..), release your fingers.
4. press green button used for dialing..
i understand that you reached up to the format phase, but format is failed.
the image on your pda's rom is corrupted or it coudn't be successfully flashed, so i think you must flash again.
before trying to flash wm6.1, remember to hardSPL your device..
good luck!
thom_yorke said:
hey guys,, I did a foolish thing and now i'm stuck!!!
I did the HardSPL thing(apparently wrong!!)
and then i started using RUU flashig the new rom
so now from my SPL on the boot screen i get that the hardSPL didn’t function, and its stuck in boot loader with old SPL
and now that i've flashed the new rom, i cant hardSPL again,,,,
I'm so stuck,
i guess i can flash AKU 2.2 and then hardSPL again,
does it gonna work?
is there anyyyything i can do?
plzzzzzzz
IPL 2.20.0001
SPL 2.20.0001
Click to expand...
Click to collapse
There is this thing called the "wiki" that contains the answer to your problem. It's link includes the words "stuck in bootloader". Take a look, and you should be fine!
dioxda2 said:
try the Lazy_Tool................................... http://forum.xda-developers.com/showthread.php?t=353547
Click to expand...
Click to collapse
Your lazy tool needs an active sync connection! It's use here is wholly inappropriate.
l3v5y said:
Your lazy tool needs an active sync connection! It's use here is wholly inappropriate.
Click to expand...
Click to collapse
My intention is to help. Even not helpful, not harmful at all......
Dear All:
I bricked my device unfortunately. I am trying to go to bootloader mode but it's not working. I pressed down simultaneously the botton right below the volume down botton and the opposite botton. While both bottons pressed, I powered on the device.
However unfortunatley, it's not working. Please advise the propoer bootloader sequence for HTC Startrek / imate smartflip.
Note I can not use jumpSPL simply because the device is brick and not booting
Samer.
samery said:
Dear All:
I bricked my device unfortunately. I am trying to go to bootloader mode but it's not working. I pressed down simultaneously the botton right below the volume down botton and the opposite botton. While both bottons pressed, I powered on the device.
However unfortunatley, it's not working. Please advise the propoer bootloader sequence for HTC Startrek / imate smartflip.
Note I can not use jumpSPL simply because the device is brick and not booting
Samer.
Click to expand...
Click to collapse
Don't power it on, while pressing both buttons, hold it, and connect your device to your pc. It will turn itself on in bootloader mode. After that install an official rom...
Pampooh said:
Don't power it on, while pressing both buttons, hold it, and connect your device to your pc. It will turn itself on in bootloader mode. After that install an official rom...
Click to expand...
Click to collapse
Thank you, it worked like a charm, however unfortunatley there is no luck.
Let me start by saying that I am trying to install your ROM, so I am delighted that you have personally answered me.
It went to bootloader mode, then after checking the image it returned saying Invalid Certificate.
Then I launched RomUpdateUtility from my laptop to try to install the ROM, it starts writing the ROM, then at 4%, the mobile restarts, and the upgrade utility displays Image Corrupted.
I tried to bring a different (WM6.1 SLIM found somewhere here in this forum) and copied the file to the memory, but received the same "invalid certificate" error.
May I ask you to please suggest a resolution for this problem? thanking you.
Sincerely yours.
Samer.
Hamdullilah it works.
I figured that if the rom is having a certificate error with the device then I should be able to return to the original rom.
so I went to ftp.clubimate.com and downloaded the original rom and install it, so it did successfully.
then I restarted the upgrade process only this time I did NOT do the same mistake again (not restarting after SDA Unlock) and i got my mobile running now like a sharm on Pampooh rom.
Thanks Pampooh, you are a saver.
Have a great day.
Samer.
Congratulations. Although I would suggest that you use the ROSE release since it uses less memory and is a bit faster than the NEO release. If you do decide to use the ROSE rom, try out PointUI Home2, it looks great. I have the download link in my 1.05b ROSE thread. Good day to you too.
true, but I used a WM6.1 slim version for a long time so it's time to change. The Neo interface is amazing and i dont really care about size, If needed, I could always use the external micro SD for storage.
I think NEO rom is fabulous, you should try it
ı want to load WM 6.1 V2 Pro to my smartflip. but when it is %52 the error occurred. than the phone is closed. when ı was open it the htc picture comes and the phone dosnt open . ı cant load it again because the phone dosnt connect to pc whit usb. please help me what ı must do?
which keys ı must press for bootlooder? please help me.
lanu42 said:
ı want to load WM 6.1 V2 Pro to my smartflip. but when it is %52 the error occurred. than the phone is closed. when ı was open it the htc picture comes and the phone dosnt open . ı cant load it again because the phone dosnt connect to pc whit usb. please help me what ı must do?
which keys ı must press for bootlooder? please help me.
Click to expand...
Click to collapse
volume down botton and the opposite botton. Hold it, and connect your device to your pc. It will turn itself on in bootloader mode. After that install an official rom...
PLEASE help
I've flashed my Prophet to ROM Diamond..........
Everything was fine, instalation without any problem...
But when it was done, I've made a hard reset and than it just loads bootloader and nothing alse, when I tryed to flash-back the WM5 it writes that I haven't connected PDA to PC.
PLSSSSSSSSSSSSSSSSSS
Help !
connect USB lead press and hold camera button / press reset button still holing cam button a three colour boot screen should appear now you can re flash your ROM using the normal method
thanks
thank's for reply, I've tryed this but nothing happend, but the "NVID_RUU" has solved that. ;-) THXXX
where ?
and just onw more question.. where can I down the "HARD SPL" ? I've looked around but havent foud any...
I think this tool does the spl for you
Info
http://forum.xda-developers.com/showpost.php?p=2317108&postcount=1
Download here:
http://rs636.rapidshare.com/files/209950732/Prophet_Tools_2.8.3.zip
thX
thank's now its fully working and running on wm6.1
Hi.
Just tryed to inst. Android in my HD2 and now it stuck with a white screen with the HTC logo.
Is it any way to fix this or do i just trach it?
I am not an expert but this happened to me once while installing SD android.
I reinstalled the original ROM from the HTC site and restored my phone to factory settings.
I tried another version of android and it worked well (since last September).
Only observation is that lately (last two month) my phone hangs a lot on both systems (droid & win) and overheats a lot and when this happens I need to wait for it to cool down (at least 20 minutes) then it accepts rebooting (I am stating this although I am not sure is it from the droid or just my HW is faulty for other reasons).
I hope this helps
I tryed a NAND install. Now I cant get conection with usb and computer
Maybe you can perform a hard reset with buttons
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
I hope it works
3mo said:
Maybe you can perform a hard reset with buttons
1. With the phone turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then press the END/POWER button shortly and release it.
2. Release the VOLUME UP and VOLUME DOWN buttons.
3. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
I hope it works
Click to expand...
Click to collapse
didnt work hehe still at the white htc logo screen. I migth installed the files the wrong way round?
Can you get to bootloader (3 coloured screen) by turning on the phone whilst holding vol down?
conantroutman said:
Can you get to bootloader (3 coloured screen) by turning on the phone whilst holding vol down?
Click to expand...
Click to collapse
Yes that's about the only thing i can do
Go-Fast said:
Yes that's about the only thing i can do
Click to expand...
Click to collapse
As long as you can get to bootloader its ok
I would start over from the begining.....
Does it still show that you have HSPL installed on bootloader?
If so, reflash the windows 6.5 ROM that you were using before the android flash.
Then follow the steps in this thread.
Hope that helps....
conantroutman said:
As long as you can get to bootloader its ok
I would start over from the begining.....
Does it still show that you have HSPL installed on bootloader?
If so, reflash the windows 6.5 ROM that you were using before the android flash.
Then follow the steps in this thread.
Hope that helps....
Click to expand...
Click to collapse
Thnx I'll try it later and report back
Still cant get my coputer to connect to the phone.
I get to the "red green and blue" screen, and it says
PB01100 HX-BC
SPL-2.00.HSPL 8G XE
0x85
CotullaHSPL 0x40
I'm on win7 SP1
Ok when you enter bootloader (red green blue screen) you should see "Serial" at the bottom..
When you connect to the computer it should change to "USB"
You might not see anything happen on your computer but the word at the bottom of the bootloader should change.
I might be mistaken here but Im pretty sure you need "2.08 HSPL" although your bootloader shows you have HSPL installed its not 2.08. This might be the cause of your original problem.
Once it says "USB" your ready to flash a ROM via USB as usual...
If it stays on "Serial" after a few minutes then try another USB port or computer if possible.
Enter bootloader and run the HSPL tool and choose 2.08HSPL......
Then start the process from the beggining.
Hope that helps.
conantroutman said:
Ok when you enter bootloader (red green blue screen) you should see "Serial" at the bottom..
When you connect to the computer it should change to "USB"
You might not see anything happen on your computer but the word at the bottom of the bootloader should change.
I might be mistaken here but Im pretty sure you need "2.08 HSPL" although your bootloader shows you have HSPL installed its not 2.08. This might be the cause of your original problem.
Once it says "USB" your ready to flash a ROM via USB as usual...
If it stays on "Serial" after a few minutes then try another USB port or computer if possible.
Enter bootloader and run the HSPL tool and choose 2.08HSPL......
Then start the process from the beggining.
Hope that helps.
Click to expand...
Click to collapse
Hah your a babe conantroutman lol thnx
Is this the rigth SPL ?
Not to intrude on conantroutman here but yes you have to have HSPL 2.08 and a 2.15.50.14 or 2.10.50.02 radio for MAGLDR to work. Without the HSPL 2.08 you can not flash MAGLDR and without the proper radio version MAGLDR will not even boot up.
So to answer your question yes the HSPL you have in the picture you posted is the correct HSPL.
Yep as T said, hspl is good, radio is good. Your all set.
That guide for installing android at the top of the thread is pretty damn good and will have you up and running in no time. Let us know how you get on
Sent From My Fingers To Your Face.....
thnx to both of you. I'll post here when done
Crap my call button dont work when I'm in bootloader
When your in the MAGLDR menu?
You may have to flash WM again to test the call button. Or try reflashing MAGLDR, that may help...
Sent From My Fingers To Your Face.....
I guesse it's a lost case so I just installed winmo and runing android from SD card
thnx for the help.
btw!
is there a way to get htc sense to work on a huawei u8800 or x5?
Hmmm its very weird because if your call button works in WM then it should work in MAGLDR....